// // Copyright (C) 2002-2003 International Business Machines Corporation // and others. All rights reserved. // // file: regeximp.h // // ICU Regular Expressions, // Definitions of constant values used in the compiled form of // a regular expression pattern. // #ifndef _REGEXIMP_H #define _REGEXIMP_H #include "cmemory.h" U_NAMESPACE_BEGIN // // debugging support. Enable one or more of the #defines immediately following // #ifdef _DEBUG //#define REGEX_SCAN_DEBUG #define REGEX_DUMP_DEBUG //#define REGEX_RUN_DEBUG #endif // End of #defines inteded to be directly set. #if defined(REGEX_SCAN_DEBUG) || defined(REGEX_RUN_DEBUG) || defined(REGEX_DUMP_DEBUG) #define REGEX_DEBUG 1 #include #endif #ifdef REGEX_SCAN_DEBUG #define REGEX_SCAN_DEBUG_PRINTF printf #else #define REGEX_SCAN_DEBUG_PRINTF #endif #ifdef REGEX_DUMP_DEBUG #define REGEX_DUMP_DEBUG_PRINTF printf #else #define REGEX_DUMP_DEBUG_PRINTF #endif #ifdef REGEX_RUN_DEBUG #define REGEX_RUN_DEBUG_PRINTF printf #define REGEX_DUMP_DEBUG_PRINTF printf #else #define REGEX_RUN_DEBUG_PRINTF #endif // // Opcode types In the compiled form of the regexp, these are the type, or opcodes, // of the entries. // enum { URX_RESERVED_OP = 0, // For multi-operand ops, most non-first words. URX_RESERVED_OP_N = 255, // For multi-operand ops, negative operand values. URX_BACKTRACK = 1, URX_END = 2, URX_ONECHAR = 3, // Value field is the 21 bit unicode char to match URX_STRING = 4, // Value field is index of string start URX_STRING_LEN = 5, // Value field is string length (code units) URX_STATE_SAVE = 6, // Value field is pattern position to push URX_NOP = 7, URX_START_CAPTURE = 8, // Value field is capture group number. URX_END_CAPTURE = 9, // Value field is capture group number URX_STATIC_SETREF = 10, // Value field is index of set in array of sets. URX_SETREF = 11, // Value field is index of set in array of sets. URX_DOTANY = 12, URX_JMP = 13, // Value field is destination position in // the pattern. URX_FAIL = 14, // Stop match operation, No match. URX_JMP_SAV = 15, // Operand: JMP destination location URX_BACKSLASH_B = 16, // Value field: 0: \b 1: \B URX_BACKSLASH_G = 17, URX_JMP_SAV_X = 18, // Conditional JMP_SAV, // Used in (x)+, breaks loop on zero length match. // Operand: Jmp destination. URX_BACKSLASH_X = 19, URX_BACKSLASH_Z = 20, // \z Unconditional end of line. URX_DOTANY_ALL = 21, // ., in the . matches any mode. URX_BACKSLASH_D = 22, // Value field: 0: \d 1: \D URX_CARET = 23, // Value field: 1: multi-line mode. URX_DOLLAR = 24, // Also for \Z URX_CTR_INIT = 25, // Counter Inits for {Interval} loops. URX_CTR_INIT_NG = 26, // 3 kinds, normal, non-greedy, and possessive. // These are 4 word opcodes. See description. // First Operand: Data loc of counter variable // 2nd Operand: Pat loc of the URX_CTR_LOOPx // at the end of the loop. // 3rd Operand: Minimum count. // 4th Operand: Max count, -1 for unbounded. URX_DOTANY_PL = 27, // .+, match rest of the line. Fail already at end. URX_CTR_LOOP = 28, // Loop Ops for {interval} loops. URX_CTR_LOOP_NG = 29, // Also in three flavors. // Operand is loc of corresponding CTR_INIT. URX_DOTANY_ALL_PL = 30, // .+, match rest of the Input. Fail if already at end URX_RELOC_OPRND = 31, // Operand value in multi-operand ops that refers // back into compiled pattern code, and thus must // be relocated when inserting/deleting ops in code. URX_STO_SP = 32, // Store the stack ptr. Operand is location within // matcher data (not stack data) to store it. URX_LD_SP = 33, // Load the stack pointer. Operand is location // to load from. URX_BACKREF = 34, // Back Reference. Parameter is the index of the // capture group variables in the state stack frame. URX_STO_INP_LOC = 35, // Store the input location. Operand is location // within the matcher stack frame. URX_JMPX = 36, // Conditional JMP. // First Operand: JMP target location. // Second Operand: Data location containing an // input position. If current input position == // saved input position, FAIL rather than taking // the JMP URX_LA_START = 37, // Starting a LookAround expression. // Save InputPos and SP in static data. // Operand: Static data offset for the save URX_LA_END = 38, // Ending a Lookaround expression. // Restore InputPos and Stack to saved values. // Operand: Static data offset for saved data. URX_ONECHAR_I = 39, // Test for case-insensitive match of a literal character. // Operand: the literal char. URX_STRING_I = 40, // Case insensitive string compare. // First Operand: Index of start of string in string literals // Second Operand (next word in compiled code): // the length of the string. URX_BACKREF_I = 41, // Case insensitive back reference. // Parameter is the index of the // capture group variables in the state stack frame. URX_DOLLAR_M = 42, // $ in multi-line mode. URX_CARET_M = 43, // ^ in multi-line mode. URX_LB_START = 44, // LookBehind Start. // Paramater is data location URX_LB_CONT = 45, // LookBehind Continue. // Param 0: the data location // Param 1: The minimum length of the look-behind match // Param 2: The max length of the look-behind match URX_LB_END = 46, // LookBehind End. // Parameter is the data location. // Check that match ended at the right spot, // Restore original input string len. URX_LBN_CONT = 47, // Negative LookBehind Continue // Param 0: the data location // Param 1: The minimum length of the look-behind match // Param 2: The max length of the look-behind match // Param 3: The pattern loc following the look-behind block. URX_LBN_END = 48, // Negative LookBehind end // Parameter is the data location. // Check that the match ended at the right spot. URX_STAT_SETREF_N = 49, // Reference to a prebuilt set (e.g. \w), negated // Operand is index of set in array of sets. URX_LOOP_SR_I = 50, // Init a [set]* loop. // Operand is the sets index in array of user sets. URX_LOOP_C = 51, // Continue a [set]* or OneChar* loop. // Operand is a matcher static data location. // Must always immediately follow LOOP_x_I instruction. URX_LOOP_DOT_I = 52, // .*, initialization of the optimized loop. // Operand value: // 0: Normal (. doesn't match new-line) mode. // 1: . matches new-line mode. URX_BACKSLASH_BU = 53 // \b or \B in UREGEX_UWORD mode, using Unicode style // word boundaries. }; // Keep this list of opcode names in sync with the above enum // Used for debug printing only. #define URX_OPCODE_NAMES \ " ", \ "BACKTRACK", \ "END", \ "ONECHAR", \ "STRING", \ "STRING_LEN", \ "STATE_SAVE", \ "NOP", \ "START_CAPTURE", \ "END_CAPTURE", \ "URX_STATIC_SETREF", \ "SETREF", \ "DOTANY", \ "JMP", \ "FAIL", \ "JMP_SAV", \ "BACKSLASH_B", \ "BACKSLASH_G", \ "JMP_SAV_X", \ "BACKSLASH_X", \ "BACKSLASH_Z", \ "DOTANY_ALL", \ "BACKSLASH_D", \ "CARET", \ "DOLLAR", \ "CTR_INIT", \ "CTR_INIT_NG", \ "DOTANY_PL", \ "CTR_LOOP", \ "CTR_LOOP_NG", \ "DOTANY_ALL_PL", \ "RELOC_OPRND", \ "STO_SP", \ "LD_SP", \ "BACKREF", \ "STO_INP_LOC", \ "JMPX", \ "LA_START", \ "LA_END", \ "ONECHAR_I", \ "STRING_I", \ "BACKREF_I", \ "DOLLAR_M", \ "CARET_M", \ "LB_START", \ "LB_CONT", \ "LB_END", \ "LBN_CONT", \ "LBN_END", \ "STAT_SETREF_N", \ "LOOP_SR_I", \ "LOOP_C", \ "LOOP_DOT_I", \ "BACKSLASH_BU" // // Convenience macros for assembling and disassembling a compiled operation. // #define URX_BUILD(type, val) (int32_t)((type << 24) | (val)) #define URX_TYPE(x) ((uint32_t)(x) >> 24) #define URX_VAL(x) ((x) & 0xffffff) // // Access to Unicode Sets composite character properties // The sets are accessed by the match engine for things like \w (word boundary) // enum { URX_ISWORD_SET = 1, URX_ISALNUM_SET = 2, URX_ISALPHA_SET = 3, URX_ISSPACE_SET = 4, URX_GC_NORMAL, // Sets for finding grapheme cluster boundaries. URX_GC_EXTEND, URX_GC_CONTROL, URX_GC_L, URX_GC_LV, URX_GC_LVT, URX_GC_V, URX_GC_T, URX_LAST_SET, URX_NEG_SET = 0x800000 // Flag bit to reverse sense of set // membership test. }; // // Match Engine State Stack Frame Layout. // struct REStackFrame { int32_t fInputIdx; // Position of next character in the input string int32_t fPatIdx; // Position of next Op in the compiled pattern int32_t fExtra[2]; // Extra state, for capture group start/ends // atomic parentheses, repeat counts, etc. // Locations assigned at pattern compile time. }; // // Start-Of-Match type. Used by find() to quickly scan to positions where a // match might start before firing up the full match engine. // enum StartOfMatch { START_NO_INFO, // No hint available. START_CHAR, // Match starts with a literal code point. START_SET, // Match starts with something matching a set. START_START, // Match starts at start of buffer only (^ or \A) START_LINE, // Match starts with ^ in multi-line mode. START_STRING // Match starts with a literal string. }; #define START_OF_MATCH_STR(v) ((v)==START_NO_INFO? "START_NO_INFO" : \ (v)==START_CHAR? "START_CHAR" : \ (v)==START_SET? "START_SET" : \ (v)==START_START? "START_START" : \ (v)==START_LINE? "START_LINE" : \ (v)==START_STRING? "START_STRING" : \ "ILLEGAL") // // 8 bit set, to fast-path latin-1 set membership tests. // struct Regex8BitSet : public UMemory { inline Regex8BitSet(); inline void operator = (const Regex8BitSet &s); inline void init(const UnicodeSet *src); inline UBool contains(UChar32 c); inline void add(UChar32 c); int8_t d[32]; }; inline Regex8BitSet::Regex8BitSet() { uprv_memset(d, 0, sizeof(d)); } inline UBool Regex8BitSet::contains(UChar32 c) { // No bounds checking! This is deliberate. return ((d[c>>3] & 1 <<(c&7)) != 0); }; inline void Regex8BitSet::add(UChar32 c) { d[c>>3] |= 1 << (c&7); }; inline void Regex8BitSet::init(const UnicodeSet *s) { if (s != NULL) { for (int i=0; i<255; i++) { if (s->contains(i)) { this->add(i); } } } } inline void Regex8BitSet::operator = (const Regex8BitSet &s) { uprv_memcpy(d, s.d, sizeof(d)); } U_NAMESPACE_END #endif