* Normally, you get the proper NumberFormat for a specific locale * (including the default locale) using the NumberFormat factory methods, * rather than constructing a DecimalNumberFormat directly. *
* Either the prefixes or the suffixes must be different for the parse * to distinguish positive from negative. Parsing will be unreliable * if the digits, thousands or decimal separators are the same, or if * any of them occur in the prefixes or suffixes. *
* [Special cases:] *
* NaN is formatted as a single character, typically \\uFFFD. *
* +/-Infinity is formatted as a single character, typically \\u221E, * plus the positive and negative pre/suffixes. *
* Note: this class is designed for common users; for very large or small * numbers, use a format that can express exponential values. *
* [Example:] *
* . // normally we would have a GUI with a menu for this
* . int32_t locCount;
* . const Locale* locales = NumberFormat::getAvailableLocales(locCount);
* . if (locCount > 12) locCount = 12; //limit output
* .
* . double myNumber = -1234.56;
* . UErrorCode success = U_ZERO_ERROR;
* . NumberFormat* form; //= NumberFormat::createInstance(success);
* .
* . // just for fun, we print out a number with the locale number, currency
* . // and percent format for each locale we can.
* . UnicodeString countryName;
* . UnicodeString displayName;
* . UnicodeString str;
* . UnicodeString pattern;
* . Formattable fmtable;
* . for (int32_t j = 0; j < 3; ++j) {
* . cout << endl << "FORMAT " << j << endl;
* . for (int32_t i = 0; i < locCount; ++i) {
* . if (locales[i].getCountry(countryName).size() == 0) {
* . // skip language-only
* . continue;
* . }
* . switch (j) {
* . default:
* . form = NumberFormat::createInstance(locales[i], success ); break;
* . case 1:
* . form = NumberFormat::createCurrencyInstance(locales[i], success ); break;
* . case 0:
* . form = NumberFormat::createPercentInstance(locales[i], success ); break;
* . }
* . if (form) {
* . str.remove();
* . pattern = ((DecimalFormat*)form)->toPattern(pattern);
* . cout << locales[i].getDisplayName(displayName) << ": " << pattern;
* . cout << " -> " << form->format(myNumber,str) << endl;
* . form->parse(form->format(myNumber,str), fmtable, success);
* . //cout << " parsed: " << fmtable << endl;
* . delete form;
* . }
* . }
* . }
*
* [The following shows the structure of the pattern.]
*
* . pattern := subpattern{;subpattern}
* . subpattern := {prefix}integer{.fraction}{suffix}
* .
* . prefix := '\\u0000'..'\\uFFFD' - specialCharacters
* . suffix := '\\u0000'..'\\uFFFD' - specialCharacters
* . integer := '#'* '0'* '0'
* . fraction := '0'* '#'*
*
* Notation:
* . X* 0 or more instances of X
* . (X | Y) either X or Y.
* . X..Y any character from X up to Y, inclusive.
* . S - T characters in S, except those in T
*
* The first subpattern is for positive numbers. The second (optional)
* subpattern is used for negative numbers. (In both cases, ',' can
* occur inside the integer portion--it is just too messy to indicate
* in BNF.) For the second subpattern, only the PREFIX and SUFFIX are
* noted; other attributes are taken only from the first subpattern.
* * Here are the special characters used in the parts of the * subpattern, with notes on their usage. *
* . Symbol Meaning * . 0 a digit, showing up a zero if it is zero * . # a digit, supressed if zero * . . placeholder for decimal separator * . , placeholder for grouping separator. * . E separates mantissa and exponent for exponential formats. * . ; separates formats. * . - default negative prefix. * . % multiply by 100 and show as percentage * . \u2030 multiply by 1000 and show as per mille * . \u00A4 currency sign; replaced by currency symbol; if * . doubled, replaced by international currency symbol. * . If present in a pattern, the monetary decimal separator * . is used instead of the decimal separator. * . X any other characters can be used in the prefix or suffix * . ' used to quote special characters in a prefix or suffix. ** [Notes] *
* If there is no explicit negative subpattern, - is prefixed to the * positive form. That is, "0.00" alone is equivalent to "0.00;-0.00". *
* Illegal formats, such as "#.#.#" in the same format, will cause a * failing UErrorCode to be returned. *
* The grouping separator is commonly used for thousands, but in some * countries for ten-thousands. The interval is a constant number of * digits between the grouping characters, such as 100,000,000 or 1,0000,0000. * If you supply a pattern with multiple grouping characters, the interval * between the last one and the end of the integer determines the primary * grouping size, and the interval between the last two determines * the secondary grouping size (see below); all others are ignored. * So "#,##,###,####" == "###,###,####" == "##,#,###,####". *
* Some locales have two different grouping intervals: One used for the * least significant integer digits (the primary grouping size), and * one used for all others (the secondary grouping size). For example, * if the primary grouping interval is 3, and the secondary is 2, then * this corresponds to the pattern "#,##,##0", and the number 123456789 * is formatted as "12,34,56,789". *
* This class only handles localized digits where the 10 digits are * contiguous in Unicode, from 0 to 9. Other digits sets (such as * superscripts) would need a different subclass. */ class U_I18N_API DecimalFormat: public NumberFormat { public: enum ERoundingMode { kRoundCeiling, kRoundFloor, kRoundDown, kRoundUp, kRoundHalfEven, kRoundHalfDown, kRoundHalfUp // We don't support ROUND_UNNECESSARY }; enum EPadPosition { kPadBeforePrefix, kPadAfterPrefix, kPadBeforeSuffix, kPadAfterSuffix }; /** * Create a DecimalFormat using the default pattern and symbols * for the default locale. This is a convenient way to obtain a * DecimalFormat when internationalization is not the main concern. *
* To obtain standard formats for a given locale, use the factory methods * on NumberFormat such as getNumberInstance. These factories will * return the most appropriate sub-class of NumberFormat for a given * locale. * @param status Output param set to success/failure code. If the * pattern is invalid this will be set to a failure code. * @stable */ DecimalFormat(UErrorCode& status); /** * Create a DecimalFormat from the given pattern and the symbols * for the default locale. This is a convenient way to obtain a * DecimalFormat when internationalization is not the main concern. *
* To obtain standard formats for a given locale, use the factory methods * on NumberFormat such as getNumberInstance. These factories will * return the most appropriate sub-class of NumberFormat for a given * locale. * @param pattern A non-localized pattern string. * @param status Output param set to success/failure code. If the * pattern is invalid this will be set to a failure code. * @stable */ DecimalFormat(const UnicodeString& pattern, UErrorCode& status); /** * Create a DecimalFormat from the given pattern and symbols. * Use this constructor when you need to completely customize the * behavior of the format. *
* To obtain standard formats for a given * locale, use the factory methods on NumberFormat such as * getInstance or getCurrencyInstance. If you need only minor adjustments * to a standard format, you can modify the format returned by * a NumberFormat factory method. * * @param pattern a non-localized pattern string * @param symbolsToAdopt the set of symbols to be used. The caller should not * delete this object after making this call. * @param status Output param set to success/failure code. If the * pattern is invalid this will be set to a failure code. * @stable */ DecimalFormat( const UnicodeString& pattern, DecimalFormatSymbols* symbolsToAdopt, UErrorCode& status); /** * Create a DecimalFormat from the given pattern and symbols. * Use this constructor when you need to completely customize the * behavior of the format. *
* To obtain standard formats for a given
* locale, use the factory methods on NumberFormat such as
* getInstance or getCurrencyInstance. If you need only minor adjustments
* to a standard format, you can modify the format returned by
* a NumberFormat factory method.
*
* @param pattern a non-localized pattern string
* @param symbols the set of symbols to be used
* @param status Output param set to success/failure code. If the
* pattern is invalid this will be set to a failure code.
* @stable
*/
DecimalFormat( const UnicodeString& pattern,
const DecimalFormatSymbols& symbols,
UErrorCode& status);
/**
* Copy constructor.
* @stable
*/
DecimalFormat(const DecimalFormat& source);
/**
* Assignment operator.
* @stable
*/
DecimalFormat& operator=(const DecimalFormat& rhs);
/**
* Destructor.
* @stable
*/
virtual ~DecimalFormat();
/**
* Clone this Format object polymorphically. The caller owns the
* result and should delete it when done.
* @stable
*/
virtual Format* clone(void) const;
/**
* Return true if the given Format objects are semantically equal.
* Objects of different subclasses are considered unequal.
* @stable
*/
virtual UBool operator==(const Format& other) const;
/**
* Format a double or long number using base-10 representation.
*
* @param number The value to be formatted.
* @param toAppendTo The string to append the formatted string to.
* This is an output parameter.
* @param pos On input: an alignment field, if desired.
* On output: the offsets of the alignment field.
* @return A reference to 'toAppendTo'.
* @stable
*/
virtual UnicodeString& format(double number,
UnicodeString& toAppendTo,
FieldPosition& pos) const;
virtual UnicodeString& format(int32_t number,
UnicodeString& toAppendTo,
FieldPosition& pos) const;
virtual UnicodeString& format(const Formattable& obj,
UnicodeString& toAppendTo,
FieldPosition& pos,
UErrorCode& status) const;
/**
* Redeclared NumberFormat method.
* @stable
*/
UnicodeString& format(const Formattable& obj,
UnicodeString& result,
UErrorCode& status) const;
/**
* Redeclared NumberFormat method.
* @stable
*/
UnicodeString& format(double number,
UnicodeString& output) const;
/**
* Redeclared NumberFormat method.
* @stable
*/
UnicodeString& format(int32_t number,
UnicodeString& output) const;
/**
* Parse the given string using this object's choices. The method
* does string comparisons to try to find an optimal match.
* If no object can be parsed, index is unchanged, and NULL is
* returned. The result is returned as the most parsimonious
* type of Formattable that will accomodate all of the
* necessary precision. For example, if the result is exactly 12,
* it will be returned as a long. However, if it is 1.5, it will
* be returned as a double.
*
* @param text The text to be parsed.
* @param result Formattable to be set to the parse result.
* If parse fails, return contents are undefined.
* @param parsePosition The position to start parsing at on input.
* On output, moved to after the last successfully
* parse character. On parse failure, does not change.
* @see Formattable
* @stable
*/
virtual void parse(const UnicodeString& text,
Formattable& result,
ParsePosition& parsePosition) const;
// Declare here again to get rid of function hiding problems.
virtual void parse(const UnicodeString& text,
Formattable& result,
UErrorCode& error) const;
/**
* Returns the decimal format symbols, which is generally not changed
* by the programmer or user.
* @return desired DecimalFormatSymbols
* @see DecimalFormatSymbols
* @stable
*/
virtual const DecimalFormatSymbols* getDecimalFormatSymbols(void) const;
/**
* Sets the decimal format symbols, which is generally not changed
* by the programmer or user.
* @param symbolsToAdopt DecimalFormatSymbols to be adopted.
* @stable
*/
virtual void adoptDecimalFormatSymbols(DecimalFormatSymbols* symbolsToAdopt);
/**
* Sets the decimal format symbols, which is generally not changed
* by the programmer or user.
* @param symbols DecimalFormatSymbols.
* @stable
*/
virtual void setDecimalFormatSymbols(const DecimalFormatSymbols& symbols);
/**
* Get the positive prefix.
*
* Examples: +123, $123, sFr123
* @stable
*/
UnicodeString& getPositivePrefix(UnicodeString& result) const;
/**
* Set the positive prefix.
*
* Examples: +123, $123, sFr123
* @stable
*/
virtual void setPositivePrefix(const UnicodeString& newValue);
/**
* Get the negative prefix.
*
* Examples: -123, ($123) (with negative suffix), sFr-123
* @stable
*/
UnicodeString& getNegativePrefix(UnicodeString& result) const;
/**
* Set the negative prefix.
*
* Examples: -123, ($123) (with negative suffix), sFr-123
* @stable
*/
virtual void setNegativePrefix(const UnicodeString& newValue);
/**
* Get the positive suffix.
*
* Example: 123%
* @stable
*/
UnicodeString& getPositiveSuffix(UnicodeString& result) const;
/**
* Set the positive suffix.
*
* Example: 123%
* @stable
*/
virtual void setPositiveSuffix(const UnicodeString& newValue);
/**
* Get the negative suffix.
*
* Examples: -123%, ($123) (with positive suffixes)
* @stable
*/
UnicodeString& getNegativeSuffix(UnicodeString& result) const;
/**
* Set the positive suffix.
*
* Examples: 123%
* @stable
*/
virtual void setNegativeSuffix(const UnicodeString& newValue);
/**
* Get the multiplier for use in percent, permill, etc.
* For a percentage, set the suffixes to have "%" and the multiplier to be 100.
* (For Arabic, use arabic percent symbol).
* For a permill, set the suffixes to have "\u2031" and the multiplier to be 1000.
*
* Examples: with 100, 1.23 -> "123", and "123" -> 1.23
* @stable
*/
int32_t getMultiplier(void) const;
/**
* Set the multiplier for use in percent, permill, etc.
* For a percentage, set the suffixes to have "%" and the multiplier to be 100.
* (For Arabic, use arabic percent symbol).
* For a permill, set the suffixes to have "\u2031" and the multiplier to be 1000.
*
* Examples: with 100, 1.23 -> "123", and "123" -> 1.23
*/
virtual void setMultiplier(int32_t newValue);
/**
* Get the rounding increment.
* @return A positive rounding increment, or 0.0 if rounding
* is not in effect.
* @see #setRoundingIncrement
* @see #getRoundingMode
* @see #setRoundingMode
* @stable
*/
virtual double getRoundingIncrement(void);
/**
* Set the rounding increment. This method also controls whether
* rounding is enabled.
* @param newValue A positive rounding increment, or 0.0 to disable rounding.
* Negative increments are equivalent to 0.0.
* @see #getRoundingIncrement
* @see #getRoundingMode
* @see #setRoundingMode
* @stable
*/
virtual void setRoundingIncrement(double newValue);
/**
* Get the rounding mode.
* @return A rounding mode
* @see #setRoundingIncrement
* @see #getRoundingIncrement
* @see #setRoundingMode
* @stable
*/
virtual ERoundingMode getRoundingMode(void);
/**
* Set the rounding mode. This has no effect unless the rounding
* increment is greater than zero.
* @param roundingMode A rounding mode
* @see #setRoundingIncrement
* @see #getRoundingIncrement
* @see #getRoundingMode
* @stable
*/
virtual void setRoundingMode(ERoundingMode roundingMode);
/**
* Get the width to which the output of format() is padded.
* @return the format width, or zero if no padding is in effect
* @see #setFormatWidth
* @see #getPadCharacter
* @see #setPadCharacter
* @see #getPadPosition
* @see #setPadPosition
* @stable
*/
virtual int32_t getFormatWidth(void);
/**
* Set the width to which the output of format() is padded.
* This method also controls whether padding is enabled.
* @param width the width to which to pad the result of
* format(), or zero to disable padding. A negative
* width is equivalent to 0.
* @see #getFormatWidth
* @see #getPadCharacter
* @see #setPadCharacter
* @see #getPadPosition
* @see #setPadPosition
* @stable
*/
virtual void setFormatWidth(int32_t width);
/**
* Get the first code unit of the string used to pad to the format width. The default is ' '.
* @return the first code unit of the pad string
* @see #setFormatWidth
* @see #getFormatWidth
* @see #setPadCharacter
* @see #getPadPosition
* @see #setPadPosition
* @deprecated remove after 2000-dec-31. See the other getPadCharacter() function
*/
inline UChar getPadCharacter(void);
/**
* Get the grapheme string (a character, possibly with modifier letters)
* used to pad to the format width. The default is " ".
* Note: The current implementation only stores the first code unit of the
* pad string.
* @return the pad grapheme string
* @see #setFormatWidth
* @see #getFormatWidth
* @see #setPadCharacter
* @see #getPadPosition
* @see #setPadPosition
* @draft
*/
virtual UnicodeString getPadCharacterString();
/**
* Set a one-code unit string used to pad to the format width. This has no effect
* unless padding is enabled.
* @param padChar the pad character that is used to construct the pad string
* @see #setFormatWidth
* @see #getFormatWidth
* @see #getPadCharacter
* @see #getPadPosition
* @see #setPadPosition
* @deprecated remove after 2000-dec-31. See the other setPadCharacter() function
*/
inline void setPadCharacter(UChar padChar);
/**
* Set the grapheme string (a character, possibly with modifier letters)
* used to pad to the format width. This has no effect
* unless padding is enabled.
* Note: The current implementation only stores the first code unit of the
* pad string.
* @param padChar the pad grapheme
* @see #setFormatWidth
* @see #getFormatWidth
* @see #getPadCharacter
* @see #getPadPosition
* @see #setPadPosition
* @draft
*/
virtual void setPadCharacter(UnicodeString padChar);
/**
* Get the position at which padding will take place. This is the location
* at which padding will be inserted if the result of format()
* is shorter than the format width.
* @return the pad position, one of kPadBeforePrefix,
* kPadAfterPrefix, kPadBeforeSuffix, or
* kPadAfterSuffix.
* @see #setFormatWidth
* @see #getFormatWidth
* @see #setPadCharacter
* @see #getPadCharacter
* @see #setPadPosition
* @see #kPadBeforePrefix
* @see #kPadAfterPrefix
* @see #kPadBeforeSuffix
* @see #kPadAfterSuffix
* @stable
*/
virtual EPadPosition getPadPosition(void);
/**
* NEW
* Set the position at which padding will take place. This is the location
* at which padding will be inserted if the result of format()
* is shorter than the format width. This has no effect unless padding is
* enabled.
* @param padPos the pad position, one of kPadBeforePrefix,
* kPadAfterPrefix, kPadBeforeSuffix, or
* kPadAfterSuffix.
* @see #setFormatWidth
* @see #getFormatWidth
* @see #setPadCharacter
* @see #getPadCharacter
* @see #getPadPosition
* @see #kPadBeforePrefix
* @see #kPadAfterPrefix
* @see #kPadBeforeSuffix
* @see #kPadAfterSuffix
* @stable
*/
virtual void setPadPosition(EPadPosition padPos);
/**
* Return whether or not scientific notation is used.
* @return TRUE if this object formats and parses scientific notation
* @see #setScientificNotation
* @see #getMinimumExponentDigits
* @see #setMinimumExponentDigits
* @see #isExponentSignAlwaysShown
* @see #setExponentSignAlwaysShown
* @stable
*/
virtual UBool isScientificNotation(void);
/**
* Set whether or not scientific notation is used.
* @param useScientific TRUE if this object formats and parses scientific
* notation
* @see #isScientificNotation
* @see #getMinimumExponentDigits
* @see #setMinimumExponentDigits
* @see #isExponentSignAlwaysShown
* @see #setExponentSignAlwaysShown
* @stable
*/
virtual void setScientificNotation(UBool useScientific);
/**
* Return the minimum exponent digits that will be shown.
* @return the minimum exponent digits that will be shown
* @see #setScientificNotation
* @see #isScientificNotation
* @see #setMinimumExponentDigits
* @see #isExponentSignAlwaysShown
* @see #setExponentSignAlwaysShown
* @stable
*/
virtual int8_t getMinimumExponentDigits(void);
/**
* Set the minimum exponent digits that will be shown. This has no
* effect unless scientific notation is in use.
* @param minExpDig a value >= 1 indicating the fewest exponent digits
* that will be shown. Values less than 1 will be treated as 1.
* @see #setScientificNotation
* @see #isScientificNotation
* @see #getMinimumExponentDigits
* @see #isExponentSignAlwaysShown
* @see #setExponentSignAlwaysShown
* @stable
*/
virtual void setMinimumExponentDigits(int8_t minExpDig);
/**
* Return whether the exponent sign is always shown.
* @return TRUE if the exponent is always prefixed with either the
* localized minus sign or the localized plus sign, false if only negative
* exponents are prefixed with the localized minus sign.
* @see #setScientificNotation
* @see #isScientificNotation
* @see #setMinimumExponentDigits
* @see #getMinimumExponentDigits
* @see #setExponentSignAlwaysShown
* @stable
*/
virtual UBool isExponentSignAlwaysShown(void);
/**
* Set whether the exponent sign is always shown. This has no effect
* unless scientific notation is in use.
* @param expSignAlways TRUE if the exponent is always prefixed with either
* the localized minus sign or the localized plus sign, false if only
* negative exponents are prefixed with the localized minus sign.
* @see #setScientificNotation
* @see #isScientificNotation
* @see #setMinimumExponentDigits
* @see #getMinimumExponentDigits
* @see #isExponentSignAlwaysShown
* @stable
*/
virtual void setExponentSignAlwaysShown(UBool expSignAlways);
/**
* Return the grouping size. Grouping size is the number of digits between
* grouping separators in the integer portion of a number. For example,
* in the number "123,456.78", the grouping size is 3.
* @see setGroupingSize
* @see NumberFormat::isGroupingUsed
* @see DecimalFormatSymbols::getGroupingSeparator
* @stable
*/
int32_t getGroupingSize(void) const;
/**
* Set the grouping size. Grouping size is the number of digits between
* grouping separators in the integer portion of a number. For example,
* in the number "123,456.78", the grouping size is 3.
* @see getGroupingSize
* @see NumberFormat::setGroupingUsed
* @see DecimalFormatSymbols::setGroupingSeparator
* @stable
*/
virtual void setGroupingSize(int32_t newValue);
/**
* Return the secondary grouping size. In some locales one
* grouping interval is used for the least significant integer
* digits (the primary grouping size), and another is used for all
* others (the secondary grouping size). A formatter supporting a
* secondary grouping size will return a positive integer unequal
* to the primary grouping size returned by
* getGroupingSize(). For example, if the primary
* grouping size is 4, and the secondary grouping size is 2, then
* the number 123456789 formats as "1,23,45,6789", and the pattern
* appears as "#,##,###0".
* @return the secondary grouping size, or a value less than
* one if there is none
* @see setSecondaryGroupingSize
* @see NumberFormat::isGroupingUsed
* @see DecimalFormatSymbols::getGroupingSeparator
*/
int32_t getSecondaryGroupingSize(void) const;
/**
* Set the secondary grouping size. If set to a value less than 1,
* then secondary grouping is turned off, and the primary grouping
* size is used for all intervals, not just the least significant.
* @see getSecondaryGroupingSize
* @see NumberFormat#setGroupingUsed
* @see DecimalFormatSymbols::setGroupingSeparator
*/
virtual void setSecondaryGroupingSize(int32_t newValue);
/**
* Allows you to get the behavior of the decimal separator with integers.
* (The decimal separator will always appear with decimals.)
*
* Example: Decimal ON: 12345 -> 12345.; OFF: 12345 -> 12345
* @stable
*/
UBool isDecimalSeparatorAlwaysShown(void) const;
/**
* Allows you to set the behavior of the decimal separator with integers.
* (The decimal separator will always appear with decimals.)
*
* Example: Decimal ON: 12345 -> 12345.; OFF: 12345 -> 12345
* @stable
*/
virtual void setDecimalSeparatorAlwaysShown(UBool newValue);
/**
* Synthesizes a pattern string that represents the current state
* of this Format object.
* @see applyPattern
* @stable
*/
virtual UnicodeString& toPattern(UnicodeString& result) const;
/**
* Synthesizes a localized pattern string that represents the current
* state of this Format object.
*
* @see applyPattern
* @stable
*/
virtual UnicodeString& toLocalizedPattern(UnicodeString& result) const;
/**
* Apply the given pattern to this Format object. A pattern is a
* short-hand specification for the various formatting properties.
* These properties can also be changed individually through the
* various setter methods.
*
* There is no limit to integer digits are set * by this routine, since that is the typical end-user desire; * use setMaximumInteger if you want to set a real value. * For negative numbers, use a second pattern, separated by a semicolon *
* . Example "#,#00.0#" -> 1,234.56
*
* This means a minimum of 2 integer digits, 1 fraction digit, and
* a maximum of 2 fraction digits.
*
* . Example: "#,#00.0#;(#,#00.0#)" for negatives in parantheses.
*
* In negative patterns, the minimum and maximum counts are ignored;
* these are presumed to be set in the positive pattern.
*
* @param pattern The pattern to be applied.
* @param status Output param set to success/failure code on
* exit. If the pattern is invalid, this will be
* set to a failure result.
* @stable
*/
virtual void applyPattern(const UnicodeString& pattern,
UErrorCode& status);
/**
* Apply the given pattern to this Format object. The pattern
* is assumed to be in a localized notation. A pattern is a
* short-hand specification for the various formatting properties.
* These properties can also be changed individually through the
* various setter methods.
* * There is no limit to integer digits are set * by this routine, since that is the typical end-user desire; * use setMaximumInteger if you want to set a real value. * For negative numbers, use a second pattern, separated by a semicolon *
* . Example "#,#00.0#" -> 1,234.56
*
* This means a minimum of 2 integer digits, 1 fraction digit, and
* a maximum of 2 fraction digits.
*
* Example: "#,#00.0#;(#,#00.0#)" for negatives in parantheses.
*
* In negative patterns, the minimum and maximum counts are ignored;
* these are presumed to be set in the positive pattern.
*
* @param pattern The localized pattern to be applied.
* @param status Output param set to success/failure code on
* exit. If the pattern is invalid, this will be
* set to a failure result.
* @stable
*/
virtual void applyLocalizedPattern(const UnicodeString& pattern,
UErrorCode& status);
/**
* Sets the maximum number of digits allowed in the integer portion of a
* number. This override limits the integer digit count to 309.
* @see NumberFormat#setMaximumIntegerDigits
* @stable
*/
virtual void setMaximumIntegerDigits(int32_t newValue);
/**
* Sets the minimum number of digits allowed in the integer portion of a
* number. This override limits the integer digit count to 309.
* @see NumberFormat#setMinimumIntegerDigits
* @stable
*/
virtual void setMinimumIntegerDigits(int32_t newValue);
/**
* Sets the maximum number of digits allowed in the fraction portion of a
* number. This override limits the fraction digit count to 340.
* @see NumberFormat#setMaximumFractionDigits
* @stable
*/
virtual void setMaximumFractionDigits(int32_t newValue);
/**
* Sets the minimum number of digits allowed in the fraction portion of a
* number. This override limits the fraction digit count to 340.
* @see NumberFormat#setMinimumFractionDigits
* @stable
*/
virtual void setMinimumFractionDigits(int32_t newValue);
/**
* The resource tags we use to retrieve decimal format data from
* locale resource bundles.
* @stable
*/
static const char *fgNumberPatterns;
public:
/**
* Return the class ID for this class. This is useful only for
* comparing to a return value from getDynamicClassID(). For example:
*
* . Base* polymorphic_pointer = createPolymorphicObject();
* . if (polymorphic_pointer->getDynamicClassID() ==
* . Derived::getStaticClassID()) ...
*
* @return The class ID for all objects of this class.
* @stable
*/
static UClassID getStaticClassID(void) { return (UClassID)&fgClassID; }
/**
* Returns a unique class ID POLYMORPHICALLY. Pure virtual override.
* This method is to implement a simple version of RTTI, since not all
* C++ compilers support genuine RTTI. Polymorphic operator==() and
* clone() methods call this method.
*
* @return The class ID for this object. All objects of a
* given class have the same class ID. Objects of
* other classes have different class IDs.
* @stable
*/
virtual UClassID getDynamicClassID(void) const { return getStaticClassID(); }
private:
static char fgClassID;
/**
* Do real work of constructing a new DecimalFormat.
*/
void construct(UErrorCode& status,
const UnicodeString* pattern = 0,
DecimalFormatSymbols* symbolsToAdopt = 0,
const Locale& locale = Locale::getDefault());
/**
* Does the real work of generating a pattern.
*/
UnicodeString& toPattern(UnicodeString& result, UBool localized) const;
/**
* Does the real work of applying a pattern.
* @param pattern The pattern to be applied.
* @param localized If true, the pattern is localized; else false.
* @param status Output param set to success/failure code on
* exit. If the pattern is invalid, this will be
* set to a failure result.
*/
void applyPattern(const UnicodeString& pattern,
UBool localized,
UErrorCode& status);
/**
* Do the work of formatting a number, either a double or a long.
*/
UnicodeString& subformat(UnicodeString& result,
FieldPosition& fieldPosition,
DigitList& digits,
UBool isInteger) const;
enum {
fgStatusInfinite,
fgStatusLength // Leave last in list.
} StatusFlags;
/**
* Parse the given text into a number. The text is parsed beginning at
* parsePosition, until an unparseable character is seen.
* @param text The string to parse.
* @param parsePosition The position at which to being parsing. Upon
* return, the first unparseable character.
* @param digits The DigitList to set to the parsed value.
* @param isExponent If true, parse an exponent. This means no
* infinite values and integer only.
* @param status Upon return contains boolean status flags indicating
* whether the value was infinite and whether it was positive.
*/
UBool subparse(const UnicodeString& text, ParsePosition& parsePosition,
DigitList& digits, UBool* status) const;
/**
* Append an affix to the given StringBuffer, using quotes if
* there are special characters. Single quotes themselves must be
* escaped in either case.
*/
void appendAffix(UnicodeString& buffer, const UnicodeString& affix,
UBool localized) const;
void appendAffix(UnicodeString& buffer,
const UnicodeString* affixPattern,
const UnicodeString& expAffix, UBool localized) const;
void expandAffix(const UnicodeString& pattern,
UnicodeString& affix) const;
void expandAffixes(void);
static double round(double a, ERoundingMode mode, UBool isNegative);
void addPadding(UnicodeString& result, UBool hasAffixes,
UBool isNegative) const;
UBool isGroupingPosition(int32_t pos) const;
/**
* Constants.
*/
//static const int8_t fgMaxDigit; // The largest digit, in this case 9
/*transient*/ //DigitList* fDigitList;
UnicodeString fPositivePrefix;
UnicodeString fPositiveSuffix;
UnicodeString fNegativePrefix;
UnicodeString fNegativeSuffix;
UnicodeString* fPosPrefixPattern;
UnicodeString* fPosSuffixPattern;
UnicodeString* fNegPrefixPattern;
UnicodeString* fNegSuffixPattern;
int32_t fMultiplier;
int32_t fGroupingSize;
int32_t fGroupingSize2;
UBool fDecimalSeparatorAlwaysShown;
/*transient*/ UBool fIsCurrencyFormat;
/* @deprecated */ DecimalFormatSymbols* fSymbols;
UBool fUseExponentialNotation;
int8_t fMinExponentDigits;
UBool fExponentSignAlwaysShown;
/* If fRoundingIncrement is NULL, there is no rounding. Otherwise, round to
* fRoundingIncrement.getDouble(). Since this operation may be expensive,
* we cache the result in fRoundingDouble. All methods that update
* fRoundingIncrement also update fRoundingDouble. */
DigitList* fRoundingIncrement;
/*transient*/ double fRoundingDouble;
ERoundingMode fRoundingMode;
UChar fPad;
int32_t fFormatWidth;
EPadPosition fPadPosition;
// Constants for characters used in programmatic (unlocalized) patterns.
static const UChar kPatternZeroDigit;
static const UChar kPatternGroupingSeparator;
static const UChar kPatternDecimalSeparator;
static const UChar kPatternPerMill;
static const UChar kPatternPercent;
static const UChar kPatternDigit;
static const UChar kPatternSeparator;
static const UChar kPatternExponent;
static const UChar kPatternPlus;
static const UChar kPatternMinus;
static const UChar kPatternPadEscape;
/**
* The CURRENCY_SIGN is the standard Unicode symbol for currency. It
* is used in patterns and substitued with either the currency symbol,
* or if it is doubled, with the international currency symbol. If the
* CURRENCY_SIGN is seen in a pattern, then the decimal separator is
* replaced with the monetary decimal separator.
*/
static const UChar kCurrencySign;
static const UChar kQuote;
protected:
static const int32_t kDoubleIntegerDigits;
static const int32_t kDoubleFractionDigits;
};
inline UnicodeString&
DecimalFormat::format(const Formattable& obj,
UnicodeString& result,
UErrorCode& status) const {
// Don't use Format:: - use immediate base class only,
// in case immediate base modifies behavior later.
return NumberFormat::format(obj, result, status);
}
inline UnicodeString&
DecimalFormat::format(double number,
UnicodeString& output) const {
FieldPosition pos(0);
return format(number, output, pos);
}
inline UnicodeString&
DecimalFormat::format(int32_t number,
UnicodeString& output) const {
FieldPosition pos(0);
return format(number, output, pos);
}
inline UChar
DecimalFormat::getPadCharacter() {
return getPadCharacterString().charAt(0);
}
inline void
DecimalFormat::setPadCharacter(UChar padChar) {
setPadCharacter(UnicodeString(padChar));
}
#endif // _DECIMFMT
//eof