* RuleBasedCollator maps characters to collation keys. *
* Table Collation has the following restrictions for efficiency (other * subclasses may be used for more complex languages) : *
1. If the French secondary ordering is specified in a collation object, * it is applied to the whole object. *
2. All non-mentioned Unicode characters are at the end of the * collation order. *
3. Private use characters are treated as identical. The private * use area in Unicode is 0xE800-0xF8FF. *
The collation table is composed of a list of collation rules, where each * rule is of three forms: *
* . < modifier > * . < relation > < text-argument > * . < reset > < text-argument > ** The following demonstrates how to create your own collation rules: *
*
'@' : Indicates that secondary differences, such as accents, are * sorted backwards, as in French.
*
*
'&' : Indicates that the next rule follows the position to where * the reset text-argument would be sorted. * *
* This sounds more complicated than it is in practice. For example, the * following are equivalent ways of expressing the same thing: *
* . a < b < c * . a < b & b < c * . a < c & a < b ** Notice that the order is important, as the subsequent item goes immediately * after the text-argument. The following are not equivalent: *
* . a < b & a < c * . a < c & a < b ** Either the text-argument must already be present in the sequence, or some * initial substring of the text-argument must be present. (e.g. "a < b & ae < * e" is valid since "a" is present in the sequence before "ae" is reset). In * this latter case, "ae" is not entered and treated as a single character; * instead, "e" is sorted as if it were expanded to two characters: "a" * followed by an "e". This difference appears in natural languages: in * traditional Spanish "ch" is treated as though it contracts to a single * character (expressed as "c < ch < d"), while in traditional German "ä" * (a-umlaut) is treated as though it expands to two characters (expressed as * "a & ae ; ä < b"). *
Ignorable Characters *
For ignorable characters, the first rule must start with a relation (the * examples we have used above are really fragments; "a < b" really should be * "< a < b"). If, however, the first relation is not "<", then all the * text-arguments up to the first "<" are ignorable. For example, ", - < a < b" * makes "-" an ignorable character, as we saw earlier in the word * "black-birds". In the samples for different languages, you see that most * accents are ignorable. *
Normalization and Accents *
The Collator object automatically normalizes text internally to separate * accents from base characters where possible. This is done both when * processing the rules, and when comparing two strings. Collator also uses * the Unicode canonical mapping to ensure that combining sequences are sorted * properly (for more information, see * The Unicode Standard, Version 2.0.)
*Errors *
The following are errors: *
* . Examples: * . Simple: "< a < b < c < d" * . Norwegian: "< a,A< b,B< c,C< d,D< e,E< f,F< g,G< h,H< i,I< j,J * . < k,K< l,L< m,M< n,N< o,O< p,P< q,Q< r,R< s,S< t,T * . < u,U< v,V< w,W< x,X< y,Y< z,Z * . < å=a°,Å=A° * . ;aa,AA< æ,Æ< ø,Ø" **
To create a table-based collation object, simply supply the collation * rules to the RuleBasedCollator contructor. For example: *
* . UErrorCode status = U_ZERO_ERROR; * . RuleBasedCollator *mySimple = new RuleBasedCollator(Simple, status); **
Another example: *
* . UErrorCode status = U_ZERO_ERROR; * . RuleBasedCollator *myNorwegian = new RuleBasedCollator(Norwegian, status); ** To add rules on top of an existing table, simply supply the orginal rules * and modifications to RuleBasedCollator constructor. For example, *
* . Traditional Spanish (fragment): ... & C < ch , cH , Ch , CH ... * . German (fragment) : ...< y , Y < z , Z * . & AE, Ä & AE, ä * . & OE , Ö & OE, ö * . & UE , Ü & UE, ü * . Symbols (fragment): ...< y, Y < z , Z * . & Question-mark ; '?' * . & Ampersand ; '&' * . & Dollar-sign ; '$' *To create a collation object for traditional Spanish, the user can take * the English collation rules and add the additional rules to the table. * For example: *
* . UErrorCode status = U_ZERO_ERROR; * . UnicodeString rules(DEFAULTRULES); * . rules += "& C < ch, cH, Ch, CH"; * . RuleBasedCollator *mySpanish = new RuleBasedCollator(rules, status); **In order to sort symbols in the similiar order of sorting their * alphabetic equivalents, you can do the following, *
* . UErrorCode status = U_ZERO_ERROR; * . UnicodeString rules(DEFAULTRULES); * . rules += "& Question-mark ; '?' & Ampersand ; '&' & Dollar-sign ; '$' "; * . RuleBasedCollator *myTable = new RuleBasedCollator(rules, status); **Another way of creating the table-based collation object, mySimple, * is: *
* . UErrorCode status = U_ZERO_ERROR; * . RuleBasedCollator *mySimple = new * . RuleBasedCollator(" < a < b & b < c & c < d", status); ** Or, ** . UErrorCode status = U_ZERO_ERROR; * . RuleBasedCollator *mySimple = new * . RuleBasedCollator(" < a < b < d & b < c", status); ** Because " < a < b < c < d" is the same as "a < b < d & b < c" or * "< a < b & b < c & c < d". * *To combine collations from two locales, (without error handling for clarity) *
* . // Create an en_US Collator object * . Locale locale_en_US("en", "US", ""); * . RuleBasedCollator* en_USCollator = (RuleBasedCollator*) * . Collator::createInstance( locale_en_US, success ); * . * . // Create a da_DK Collator object * . Locale locale_da_DK("da", "DK", ""); * . RuleBasedCollator* da_DKCollator = (RuleBasedCollator*) * . Collator::createInstance( locale_da_DK, success ); * . * . // Combine the two * . // First, get the collation rules from en_USCollator * . UnicodeString rules = en_USCollator->getRules(); * . // Second, get the collation rules from da_DKCollator * . rules += da_DKCollator->getRules(); * . RuleBasedCollator* newCollator = new RuleBasedCollator( rules, success ); * . // newCollator has the combined rules **Another more interesting example would be to make changes on an existing * table to create a new collation object. For example, add * "& C < ch, cH, Ch, CH" to the en_USCollation object to create your own * English collation object, *
* . // Create a new Collator object with additional rules * . rules = en_USCollator->getRules(); * . rules += "& C < ch, cH, Ch, CH"; * . RuleBasedCollator* myCollator = new RuleBasedCollator( rules, success ); * . // myCollator contains the new rules ** *The following example demonstrates how to change the order of * non-spacing accents, *
* . UChar contents[] = { * . '=', 0x0301, ';', 0x0300, ';', 0x0302, * . ';', 0x0308, ';', 0x0327, ',', 0x0303, // main accents * . ';', 0x0304, ';', 0x0305, ';', 0x0306, // main accents * . ';', 0x0307, ';', 0x0309, ';', 0x030A, // main accents * . ';', 0x030B, ';', 0x030C, ';', 0x030D, // main accents * . ';', 0x030E, ';', 0x030F, ';', 0x0310, // main accents * . ';', 0x0311, ';', 0x0312, // main accents * . '<', 'a', ',', 'A', ';', 'a', 'e', ',', 'A', 'E', * . ';', 0x00e6, ',', 0x00c6, '<', 'b', ',', 'B', * . '<', 'c', ',', 'C', '<', 'e', ',', 'E', '&', * . 'C', '<', 'd', ',', 'D', 0 }; * . UnicodeString oldRules(contents); * . UErrorCode status = U_ZERO_ERROR; * . // change the order of accent characters * . UChar addOn[] = { '&', ',', 0x0300, ';', 0x0308, ';', 0x0302, 0 }; * . oldRules += addOn; * . RuleBasedCollator *myCollation = new RuleBasedCollator(oldRules, status); ** *The last example shows how to put new primary ordering in before the * default setting. For example, in Japanese collation, you can either sort * English characters before or after Japanese characters, *
* . UErrorCode status = U_ZERO_ERROR; * . // get en_US collation rules * . RuleBasedCollator* en_USCollation = * . (RuleBasedCollator*) Collator::createInstance(Locale::US, status); * . // Always check the error code after each call. * . if (U_FAILURE(status)) return; * . // add a few Japanese character to sort before English characters * . // suppose the last character before the first base letter 'a' in * . // the English collation rule is 0x2212 * . UChar jaString[] = { '&', 0x2212, '<', 0x3041, ',', 0x3042, '<', 0x3043, ',', 0x3044, 0 }; * . UnicodeString rules( en_USCollation->getRules() ); * . rules += jaString; * . RuleBasedCollator *myJapaneseCollation = new RuleBasedCollator(rules, status); **NOTE: Typically, a collation object is created with * Collator::createInstance(). *
* Note:
RuleBasedCollators with different Locale, * CollationStrength and Decomposition mode settings will return different * sort orders for the same set of strings. Locales have specific * collation rules, and the way in which secondary and tertiary differences * are taken into account, for example, will result in a different sorting order * for same strings. ** @see Collator * @version 1.27 4/8/97 * @author Helena Shih */ class U_I18N_API RuleBasedCollator : public Collator { public: // constructor/destructor /** * RuleBasedCollator constructor. This takes the table rules and builds * a collation table out of them. Please see RuleBasedCollator class * description for more details on the collation rule syntax. * @see Locale * @param rules the collation rules to build the collation table from. * @stable */ RuleBasedCollator(const UnicodeString& rules, UErrorCode& status); RuleBasedCollator( const UnicodeString& rules, ECollationStrength collationStrength, UErrorCode& status); RuleBasedCollator( const UnicodeString& rules, Normalizer::EMode decompositionMode, UErrorCode& status); RuleBasedCollator( const UnicodeString& rules, ECollationStrength collationStrength, Normalizer::EMode decompositionMode, UErrorCode& status); /** Destructor. * @stable */ virtual ~RuleBasedCollator(); /** Copy constructor. * @stable */ RuleBasedCollator(const RuleBasedCollator& other); /** * Assignment operator. * @stable */ RuleBasedCollator& operator=(const RuleBasedCollator& other); /** * Returns true if "other" is the same as "this". * @stable */ virtual UBool operator==(const Collator& other) const; /** * Returns true if "other" is not the same as "this". * @stable */ virtual UBool operator!=(const Collator& other) const; /** * Makes a deep copy of the object. The caller owns the returned object. * @return the cloned object. * @stable */ virtual Collator* clone(void) const; /** * Creates a collation element iterator for the source string. The * caller of this method is responsible for the memory management of * the return pointer. * @param source the string over which the CollationElementIterator will iterate. * @return the collation element iterator of the source string using this as * the based collator. * @stable */ virtual CollationElementIterator* createCollationElementIterator(const UnicodeString& source) const; /** * Creates a collation element iterator for the source. The * caller of this method is responsible for the memory management of * the returned pointer. * @param source the CharacterIterator which produces the characters over which the * CollationElementItgerator will iterate. * @return the collation element iterator of the source using this as * the based collator. * @stable */ virtual CollationElementIterator* createCollationElementIterator(const CharacterIterator& source) const; /** * Compares a range of character data stored in two different strings * based on the collation rules. Returns * information about whether a string is less than, greater than or * equal to another string in a language. * This can be overriden in a subclass. * @param source the source string. * @param target the target string to be compared with the source stirng. * @return the comparison result. GREATER if the source string is greater * than the target string, LESS if the source is less than the target. Otherwise, * returns EQUAL. * @stable */ virtual EComparisonResult compare( const UnicodeString& source, const UnicodeString& target) const; /** * Compares a range of character data stored in two different strings * based on the collation rules up to the specified length. Returns * information about whether a string is less than, greater than or * equal to another string in a language. * This can be overriden in a subclass. * @param source the source string. * @param target the target string to be compared with the source string. * @param length compares up to the specified length * @return the comparison result. GREATER if the source string is greater * than the target string, LESS if the source is less than the target. Otherwise, * returns EQUAL. * @draft */ virtual EComparisonResult compare( const UnicodeString& source, const UnicodeString& target, int32_t length) const; /** * The comparison function compares the character data stored in two * different string arrays. Returns information about whether a string * array is less than, greater than or equal to another string array. *
Example of use: *
* . UErrorCode status = U_ZERO_ERROR; * . Collator *myCollation = Collator::createInstance(Locale::US, status); * . if (U_FAILURE(status)) return; * . myCollation->setStrength(Collator::PRIMARY); * . // result would be Collator::EQUAL ("abc" == "ABC") * . // (no primary difference between "abc" and "ABC") * . Collator::EComparisonResult result = myCollation->compare(L"abc", 3, L"ABC", 3); * . myCollation->setStrength(Collator::TERTIARY); * . // result would be Collator::LESS (abc" <<< "ABC") * . // (with tertiary difference between "abc" and "ABC") * . Collator::EComparisonResult result = myCollation->compare(L"abc", 3, L"ABC", 3); ** @param source the source string array to be compared with. * @param sourceLength the length of the source string array. If this value * is equal to -1, the string array is null-terminated. * @param target the string that is to be compared with the source string. * @param targetLength the length of the target string array. If this value * is equal to -1, the string array is null-terminated. * @return Returns a byte value. GREATER if source is greater * than target; EQUAL if source is equal to target; LESS if source is less * than target * @stable **/ virtual EComparisonResult compare( const UChar* source, int32_t sourceLength, const UChar* target, int32_t targetLength) const ; /** Transforms a specified region of the string into a series of characters * that can be compared with CollationKey.compare. Use a CollationKey when * you need to do repeated comparisions on the same string. For a single comparison * the compare method will be faster. * @param source the source string. * @param key the transformed key of the source string. * @param status the error code status. * @return the transformed key. * @see CollationKey * @draft */ virtual CollationKey& getCollationKey( const UnicodeString& source, CollationKey& key, UErrorCode& status) const; /** Transforms a specified region of the string into a series of characters * that can be compared with CollationKey.compare. Use a CollationKey when * you need to do repeated comparisions on the same string. For a single comparison * the compare method will be faster. * @param source the source string. * @param key the transformed key of the source string. * @param status the error code status. * @return the transformed key. * @see CollationKey * @draft */ virtual CollationKey& getCollationKey(const UChar *source, int32_t sourceLength, CollationKey& key, UErrorCode& status) const; /** * Generates the hash code for the rule-based collation object. * @return the hash code. * @stable */ virtual int32_t hashCode(void) const; /** * Gets the table-based rules for the collation object. * @return returns the collation rules that the table collation object * was created from. * @stable */ const UnicodeString& getRules(void) const; /** * Return the maximum length of any expansion sequences that end * with the specified comparison order. * * @param order a collation order returned by previous or next. * @return the maximum length of any expansion seuences ending * with the specified order. * * @see CollationElementIterator#getMaxExpansion * @draft ? pending CollationElementIterator::getMaxExpansion */ int32_t getMaxExpansion(int32_t order) const; /** * Returns a unique class ID POLYMORPHICALLY. Pure virtual override. * This method is to implement a simple version of RTTI, since not all * C++ compilers support genuine RTTI. Polymorphic operator==() and * clone() methods call this method. * * @return The class ID for this object. All objects of a * given class have the same class ID. Objects of * other classes have different class IDs. */ virtual UClassID getDynamicClassID(void) const { return RuleBasedCollator::getStaticClassID(); } /** * Returns the class ID for this class. This is useful only for * comparing to a return value from getDynamicClassID(). For example: * * Base* polymorphic_pointer = createPolymorphicObject(); * if (polymorphic_pointer->getDynamicClassID() == * Derived::getStaticClassID()) ... * * @return The class ID for all objects of this class. */ static UClassID getStaticClassID(void) { return (UClassID)&fgClassID; } /** * Returns the binary format of the class's rules. The format is * that of .col files. * * @param length Returns the length of the data, in bytes * @param status the error code status. * @return memory, owned by the caller, of size 'length' bytes. * @draft INTERNAL USE ONLY */ uint8_t *cloneRuleData(int32_t &length, UErrorCode &status); /***************************************************************************** * PRIVATE *****************************************************************************/ private: static char fgClassID; // Streamer used to read/write binary collation data files. friend class RuleBasedCollatorStreamer; // Used to iterate over collation elements in a character source. friend class CollationElementIterator; // Collator ONLY needs access to RuleBasedCollator(const Locale&, UErrorCode&) friend class Collator; // TableCollationData ONLY needs access to UNMAPPED friend class TableCollationData; // This is just temporary, for prototyping. friend int32_t ucol_getNextCE(const UCollator *coll, collIterate *source, UErrorCode *status); friend int32_t ucol_getSortKey(const UCollator *coll, const UChar *source, int32_t sourceLength, uint8_t *result, int32_t resultLength); friend int32_t ucol_getSortKeyEx(const UCollator *coll, const UChar *source, int32_t sourceLength, uint8_t *result, int32_t resultLength); /** Default constructor */ RuleBasedCollator(); /** * Create a new entry in the expansion table that contains the orderings * for the given characers. If anOrder is valid, it is added to the * beginning of the expanded list of orders. */ int32_t addExpansion(int32_t anOrder, const UnicodeString &expandChars); /** * Create a table-based collation object with the given rules. * @see RuleBasedCollator#RuleBasedCollator * @exception FormatException If the rules format is incorrect. */ void build( const UnicodeString& rules, UErrorCode& success); /** Add expanding entries for pre-composed unicode characters so that this * collator can be used reasonably well with decomposition turned off. */ void addComposedChars(void); /** * Look up for unmapped values in the expanded character table. */ void commit(void); /** * Increment of the last order based on the collation strength. * @param s the collation strength. * @param lastOrder the last collation order. * @return the new collation order. */ int32_t increment( Collator::ECollationStrength s, int32_t lastOrder); /** * Adds a character and its designated order into the collation table. * @param ch the Unicode character, * @param anOrder the order. * @param status the error code status. */ void addOrder( UChar ch, int32_t anOrder, UErrorCode& status); /** * Adds the expanding string into the collation table, for example, a-umlaut in German. * @param groupChars the contracting characters. * @param expChars the expanding characters. * @param anOrder the order. * @param status the error code status. */ void addExpandOrder(const UnicodeString& groupChars, const UnicodeString& expChars, int32_t anOrder, UErrorCode& status); /** * Adds the contracting string into the collation table, for example, ch in Spanish. * @param groupChars the contracting characters. * @param anOrder the order. * @param status the error code status. */ void addContractOrder(const UnicodeString& groupChars, int32_t anOrder, UErrorCode& status); /** * Adds the contracting string into the collation table, for example, ch in Spanish. * @param groupChars the contracting characters. * @param anOrder the order. * @param fwd TRUE if this is for the forward direction * @param status the error code status. */ void addContractOrder(const UnicodeString& groupChars, int32_t anOrder, UBool fwd, UErrorCode& status); /** * If the given string has been specified as a contracting string * in this collation table, return its ordering, otherwise return UNMAPPED. * @param groupChars the string * @return the order of the contracted character, or UNMAPPED if * there isn't one. */ int32_t getContractOrder(const UnicodeString &groupChars) const; /** * Gets the entry of list of the contracting string in the collation * table. * @param ch the starting character of the contracting string * @return the entry of contracting element which starts with the specified * character in the list of contracting elements. */ VectorOfPToContractElement* getContractValues(UChar ch) const; /** * Ges the entry of list of the contracting string in the collation * table. * @param index the index of the contract character list * @return the entry of the contracting element of the specified index in the * list. */ VectorOfPToContractElement* getContractValues(int32_t index) const; /** * Gets the entry of value list of the expanding string in the collation * table at the specified index. * @param order the order of the expanding string value list * @return the entry of the expanding-char element of the specified index in * the list. */ VectorOfInt* getExpandValueList(int32_t order) const; /** * Gets the comarison order of a character from the collation table. * @param ch the Unicode character * @return the comparison order of a character. */ int32_t getCharOrder(UChar ch) const; /** * Gets the comarison order of a character from the collation table. * @param list the contracting element table. * @param name the contracting char string. * @return the comparison order of the contracting character. */ static int32_t getEntry( VectorOfPToContractElement* list, const UnicodeString& name, UBool fwd); /** * Flattens the given object persistently to a file. The file name * argument should be a path name that can be passed directly to the * underlying OS. Once a RuleBasedCollator has been written to a file, * it can be resurrected by calling the RuleBasedCollator(const char*) * constructor, which operates very quickly. * @param fileName the output file name. * @return TRUE if writing to the file was successful, FALSE otherwise. */ UBool writeToFile(const char* fileName) const; // True on success /* UBool prepareForBundle() const;*/ /** * Add this table collation to the cache. This involves adding the * enclosed TableCollationData to the cache, and then marking our * pointer as "not owned" by setting dataIsOwned to false. * @param key the unique that represents this collation data object. */ void addToCache( const UnicodeString& key); /** * RuleBasedCollator constructor. This constructor takes a locale. The only * caller of this class should be Collator::createInstance(). If createInstance() * happens to know that the requested locale's collation is implemented as * a RuleBasedCollator, it can then call this constructor. OTHERWISE IT SHOULDN'T, * since this constructor ALWAYS RETURNS A VALID COLLATION TABLE. It does this * by falling back to defaults. */ RuleBasedCollator( const Locale& desiredLocale, UErrorCode& status); /** * Internal constructFromXyx() methods. These methods do object construction * from various sources. They act like assignment operators; whatever used * to be in this object is discarded.FROM RULES. This constructor turns * around and calls build().
FROM CACHE. This constructor tries to get the * requested cached TableCollationData object, and wrap us around it.
FROM FILE. * There are two constructors named constructFromFile(). One takes a const char*: * this is a path name to be passed directly to the host OS, where a flattened * table collation (produced by writeToFile()) resides. The other method takes * a Locale, and a UnicodeString locale file name. The distinction is this: * the Locale is the locale we are seeking. The file name is the name of the * data file (either binary, as produced by writeToFile(), or ASCII, as read * by ResourceBundle). Within the file, if it is found, the method will look * for the given Locale. */ void constructFromRules( const UnicodeString& rules, UErrorCode& status); void constructFromFile( const Locale& locale, const UnicodeString& localeFileName, UBool tryBinaryFile, UErrorCode& status); void constructFromFile( const char* fileName, UErrorCode& status); void constructFromCache( const UnicodeString& key, UErrorCode& status); const char* constructFromBundle(const Locale& fileName, UErrorCode& status); //-------------------------------------------------------------------------- // Internal Static Utility Methods /** * Creates the path name with given information. * @param prefix the prefix of the file name. * @param name the actual file name. * @param suffix the suffix of the file name. * @return the generated file name. */ static char* createPathName( const UnicodeString& prefix, const UnicodeString& name, const UnicodeString& suffix); int32_t getStrengthOrder(NormalizerIterator* cursor, UErrorCode status) const; VectorOfInt* makeReorderedBuffer(NormalizerIterator* cursor, UChar colFirst, int32_t lastValue, VectorOfInt* lastExpansion) const; int32_t strengthOrder(int32_t value) const ; int32_t nextContractChar(NormalizerIterator *cursor, UChar ch, UErrorCode& status) const; /** * Chops off the last portion of the locale name. For example, from "en_US_CA" * to "en_US" and "en_US" to "en". * @param localeName the locale name. */ static void chopLocale(UnicodeString& localeName); //-------------------------------------------------------------------------- // Constants static const int32_t UNMAPPED; static const int32_t CHARINDEX; // need look up in .commit() static const int32_t EXPANDCHARINDEX; // Expand index follows static const int32_t CONTRACTCHARINDEX; // contract indexes follow static const int32_t PRIMARYORDERINCREMENT; static const int32_t MAXIGNORABLE; static const int32_t SECONDARYORDERINCREMENT; static const int32_t TERTIARYORDERINCREMENT; static const int32_t PRIMARYORDERMASK; static const int32_t SECONDARYORDERMASK; static const int32_t TERTIARYORDERMASK; static const int32_t SECONDARYRESETMASK; static const int32_t IGNORABLEMASK; static const int32_t PRIMARYDIFFERENCEONLY; static const int32_t SECONDARYDIFFERENCEONLY; static const int32_t PRIMARYORDERSHIFT; static const int32_t SECONDARYORDERSHIFT; static const int32_t SORTKEYOFFSET; static const int32_t CONTRACTCHAROVERFLOW; static const int16_t FILEID; static UnicodeString DEFAULTRULES; static const char* kFilenameSuffix; //-------------------------------------------------------------------------- // Data Members UBool isOverIgnore; UChar lastChar; MergeCollation* mPattern; UnicodeString sbuffer; UnicodeString tbuffer; UnicodeString key; NormalizerIterator *cursor1; NormalizerIterator *cursor2; UBool dataIsOwned; TableCollationData* data; }; inline UBool RuleBasedCollator::operator!=(const Collator& other) const { return !(*this == other); } inline void RuleBasedCollator::addContractOrder(const UnicodeString &groupChars, int32_t anOrder, UErrorCode &status) { addContractOrder(groupChars, anOrder, TRUE, status); } #endif