skia2/tools/PictureRenderingFlags.cpp

385 lines
14 KiB
C++
Raw Normal View History

Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
/*
* Copyright 2013 Google Inc.
*
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "PictureRenderingFlags.h"
#include "CopyTilesRenderer.h"
#include "PictureRenderer.h"
#include "picture_utils.h"
#include "SkCommandLineFlags.h"
#include "SkData.h"
#include "SkImage.h"
#include "SkImageDecoder.h"
#include "SkString.h"
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
// Alphabetized list of flags used by this file or bench_ and render_pictures.
DEFINE_string(bbh, "none", "bbhType [width height]: Set the bounding box hierarchy type to "
"be used. Accepted values are: none, rtree, grid. "
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
"Not compatible with --pipe. With value "
"'grid', width and height must be specified. 'grid' can "
"only be used with modes tile, record, and "
"playbackCreation.");
#if SK_SUPPORT_GPU
static const char kGpuAPINameGL[] = "gl";
static const char kGpuAPINameGLES[] = "gles";
#define GPU_CONFIG_STRING "|gpu|msaa4|msaa16|nvprmsaa4|nvprmsaa16|gpudft"
#else
#define GPU_CONFIG_STRING ""
#endif
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
#if SK_ANGLE
#define ANGLE_CONFIG_STRING "|angle"
#else
#define ANGLE_CONFIG_STRING ""
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
#endif
#if SK_MESA
#define MESA_CONFIG_STRING "|mesa"
#else
#define MESA_CONFIG_STRING ""
#endif
// Although this config does not support all the same options as gm, the names should be kept
// consistent.
DEFINE_string(config, "8888", "["
"8888" GPU_CONFIG_STRING ANGLE_CONFIG_STRING MESA_CONFIG_STRING
"]: Use the corresponding config.");
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
DEFINE_bool(deferImageDecoding, false, "Defer decoding until drawing images. "
"Has no effect if the provided skp does not have its images encoded.");
DEFINE_string(mode, "simple", "Run in the corresponding mode:\n"
"simple: Simple rendering.\n"
"tile width height: Use tiles with the given dimensions or percentages.\n"
"pow2tile minWidth height: Use tiles with widths that are all a power\n"
"\tof two such that they minimize the amount of wasted tile space.\n"
"\tminWidth must be a power of two.\n"
"copyTile width height: Draw the picture, then copy into tiles. If the\n"
"\tpicture is large enough, it is broken into larger tiles to avoid\n"
"\tcreating a large canvas.\n"
// TODO: If bench_pictures and render_pictures were two separate targets, we could use build flags
// to determine which modes to display.
"record: (Only in bench_pictures) Time recording from a picture to a new\n"
"\tpicture.\n"
"playbackCreation: (Only in bench_pictures) Time creation of the \n"
"\tSkPicturePlayback.\n"
"rerecord: (Only in render_pictures) Record the picture as a new skp,\n"
"\twith the bitmaps PNG encoded.\n");
DEFINE_bool(pipe, false, "Use SkGPipe rendering. Currently incompatible with \"mode\".");
DEFINE_string2(readPath, r, "", "skp files or directories of skp files to process.");
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
DEFINE_double(scale, 1, "Set the scale factor.");
DEFINE_string(tiles, "", "Used with --mode copyTile to specify number of tiles per larger tile "
"in the x and y directions.");
DEFINE_string(viewport, "", "width height: Set the viewport.");
#if SK_SUPPORT_GPU
DEFINE_string(gpuAPI, "", "Force use of specific gpu API. Using \"gl\" "
"forces OpenGL API. Using \"gles\" forces OpenGL ES API. "
"Defaults to empty string, which selects the API native to the "
"system.");
DEFINE_bool(gpuCompressAlphaMasks, false, "Compress masks generated from falling back to "
"software path rendering.");
#endif
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
sk_tools::PictureRenderer* parseRenderer(SkString& error, PictureTool tool) {
error.reset();
bool useTiles = false;
const char* widthString = NULL;
const char* heightString = NULL;
bool isPowerOf2Mode = false;
bool isCopyMode = false;
const char* mode = NULL;
bool gridSupported = false;
#if SK_SUPPORT_GPU
GrContext::Options grContextOpts;
grContextOpts.fDrawPathToCompressedTexture = FLAGS_gpuCompressAlphaMasks;
#define RENDERER_ARGS (grContextOpts)
#else
#define RENDERER_ARGS ()
#endif
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
SkAutoTUnref<sk_tools::PictureRenderer> renderer;
if (FLAGS_mode.count() >= 1) {
mode = FLAGS_mode[0];
if (0 == strcmp(mode, "record")) {
renderer.reset(SkNEW_ARGS(sk_tools::RecordPictureRenderer, RENDERER_ARGS));
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
gridSupported = true;
} else if (0 == strcmp(mode, "tile") || 0 == strcmp(mode, "pow2tile")
|| 0 == strcmp(mode, "copyTile")) {
useTiles = true;
if (0 == strcmp(mode, "pow2tile")) {
isPowerOf2Mode = true;
} else if (0 == strcmp(mode, "copyTile")) {
isCopyMode = true;
} else {
gridSupported = true;
}
if (FLAGS_mode.count() < 2) {
error.printf("Missing width for --mode %s\n", mode);
return NULL;
}
widthString = FLAGS_mode[1];
if (FLAGS_mode.count() < 3) {
error.printf("Missing height for --mode %s\n", mode);
return NULL;
}
heightString = FLAGS_mode[2];
} else if (0 == strcmp(mode, "playbackCreation") && kBench_PictureTool == tool) {
renderer.reset(SkNEW_ARGS(sk_tools::PlaybackCreationRenderer, RENDERER_ARGS));
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
gridSupported = true;
// undocumented
} else if (0 == strcmp(mode, "gatherPixelRefs") && kBench_PictureTool == tool) {
#if SK_SUPPORT_GPU
renderer.reset(sk_tools::CreateGatherPixelRefsRenderer(grContextOpts));
#else
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
renderer.reset(sk_tools::CreateGatherPixelRefsRenderer());
#endif
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
} else if (0 == strcmp(mode, "rerecord") && kRender_PictureTool == tool) {
renderer.reset(SkNEW_ARGS(sk_tools::RecordPictureRenderer, RENDERER_ARGS));
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
// Allow 'mode' to be set to 'simple', but do not create a renderer, so we can
// ensure that pipe does not override a mode besides simple. The renderer will
// be created below.
} else if (0 == strcmp(mode, "simple")) {
gridSupported = true;
} else {
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
error.printf("%s is not a valid mode for --mode\n", mode);
return NULL;
}
}
if (useTiles) {
SkASSERT(NULL == renderer);
SkAutoTUnref<sk_tools::TiledPictureRenderer> tiledRenderer;
if (isCopyMode) {
int xTiles = -1;
int yTiles = -1;
if (FLAGS_tiles.count() > 0) {
if (FLAGS_tiles.count() != 2) {
error.printf("--tiles requires an x value and a y value.\n");
return NULL;
}
xTiles = atoi(FLAGS_tiles[0]);
yTiles = atoi(FLAGS_tiles[1]);
}
int x, y;
if (xTiles != -1 && yTiles != -1) {
x = xTiles;
y = yTiles;
if (x <= 0 || y <= 0) {
error.printf("--tiles must be given values > 0\n");
return NULL;
}
} else {
x = y = 4;
}
#if SK_SUPPORT_GPU
tiledRenderer.reset(SkNEW_ARGS(sk_tools::CopyTilesRenderer, (grContextOpts, x, y)));
#else
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
tiledRenderer.reset(SkNEW_ARGS(sk_tools::CopyTilesRenderer, (x, y)));
#endif
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
} else {
tiledRenderer.reset(SkNEW_ARGS(sk_tools::TiledPictureRenderer, RENDERER_ARGS));
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
}
if (isPowerOf2Mode) {
int minWidth = atoi(widthString);
if (!SkIsPow2(minWidth) || minWidth < 0) {
SkString err;
error.printf("-mode %s must be given a width"
" value that is a power of two\n", mode);
return NULL;
}
tiledRenderer->setTileMinPowerOf2Width(minWidth);
} else if (sk_tools::is_percentage(widthString)) {
if (isCopyMode) {
error.printf("--mode %s does not support percentages.\n", mode);
return NULL;
}
tiledRenderer->setTileWidthPercentage(atof(widthString));
if (!(tiledRenderer->getTileWidthPercentage() > 0)) {
error.printf("--mode %s must be given a width percentage > 0\n", mode);
return NULL;
}
} else {
tiledRenderer->setTileWidth(atoi(widthString));
if (!(tiledRenderer->getTileWidth() > 0)) {
error.printf("--mode %s must be given a width > 0\n", mode);
return NULL;
}
}
if (sk_tools::is_percentage(heightString)) {
if (isCopyMode) {
error.printf("--mode %s does not support percentages.\n", mode);
return NULL;
}
tiledRenderer->setTileHeightPercentage(atof(heightString));
if (!(tiledRenderer->getTileHeightPercentage() > 0)) {
error.printf("--mode %s must be given a height percentage > 0\n", mode);
return NULL;
}
} else {
tiledRenderer->setTileHeight(atoi(heightString));
if (!(tiledRenderer->getTileHeight() > 0)) {
SkString err;
error.printf("--mode %s must be given a height > 0\n", mode);
return NULL;
}
}
renderer.reset(tiledRenderer.detach());
if (FLAGS_pipe) {
error.printf("Pipe rendering is currently not compatible with tiling.\n"
"Turning off pipe.\n");
}
} else { // useTiles
if (FLAGS_pipe) {
if (renderer != NULL) {
error.printf("Pipe is incompatible with other modes.\n");
return NULL;
}
renderer.reset(SkNEW_ARGS(sk_tools::PipePictureRenderer, RENDERER_ARGS));
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
}
}
if (NULL == renderer) {
renderer.reset(SkNEW_ARGS(sk_tools::SimplePictureRenderer, RENDERER_ARGS));
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
}
if (FLAGS_viewport.count() > 0) {
if (FLAGS_viewport.count() != 2) {
error.printf("--viewport requires a width and a height.\n");
return NULL;
}
SkISize viewport;
viewport.fWidth = atoi(FLAGS_viewport[0]);
viewport.fHeight = atoi(FLAGS_viewport[1]);
renderer->setViewport(viewport);
}
sk_tools::PictureRenderer::SkDeviceTypes deviceType =
sk_tools::PictureRenderer::kBitmap_DeviceType;
#if SK_SUPPORT_GPU
GrGLStandard gpuAPI = kNone_GrGLStandard;
if (1 == FLAGS_gpuAPI.count()) {
if (FLAGS_gpuAPI.contains(kGpuAPINameGL)) {
gpuAPI = kGL_GrGLStandard;
} else if (FLAGS_gpuAPI.contains(kGpuAPINameGLES)) {
gpuAPI = kGLES_GrGLStandard;
} else {
error.printf("--gpuAPI invalid api value.\n");
return NULL;
}
} else if (FLAGS_gpuAPI.count() > 1) {
error.printf("--gpuAPI invalid api value.\n");
return NULL;
}
int sampleCount = 0;
bool useDFText = false;
#endif
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (FLAGS_config.count() > 0) {
if (0 == strcmp(FLAGS_config[0], "8888")) {
deviceType = sk_tools::PictureRenderer::kBitmap_DeviceType;
}
#if SK_SUPPORT_GPU
else if (0 == strcmp(FLAGS_config[0], "gpu")) {
deviceType = sk_tools::PictureRenderer::kGPU_DeviceType;
}
else if (0 == strcmp(FLAGS_config[0], "msaa4")) {
deviceType = sk_tools::PictureRenderer::kGPU_DeviceType;
sampleCount = 4;
}
else if (0 == strcmp(FLAGS_config[0], "msaa16")) {
deviceType = sk_tools::PictureRenderer::kGPU_DeviceType;
sampleCount = 16;
}
else if (0 == strcmp(FLAGS_config[0], "nvprmsaa4")) {
deviceType = sk_tools::PictureRenderer::kNVPR_DeviceType;
sampleCount = 4;
}
else if (0 == strcmp(FLAGS_config[0], "nvprmsaa16")) {
deviceType = sk_tools::PictureRenderer::kNVPR_DeviceType;
sampleCount = 16;
}
else if (0 == strcmp(FLAGS_config[0], "gpudft")) {
deviceType = sk_tools::PictureRenderer::kGPU_DeviceType;
useDFText = true;
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
#if SK_ANGLE
else if (0 == strcmp(FLAGS_config[0], "angle")) {
deviceType = sk_tools::PictureRenderer::kAngle_DeviceType;
}
#endif
#if SK_MESA
else if (0 == strcmp(FLAGS_config[0], "mesa")) {
deviceType = sk_tools::PictureRenderer::kMesa_DeviceType;
}
#endif
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
#endif
else {
error.printf("%s is not a valid mode for --config\n", FLAGS_config[0]);
return NULL;
}
#if SK_SUPPORT_GPU
if (!renderer->setDeviceType(deviceType, gpuAPI)) {
#else
if (!renderer->setDeviceType(deviceType)) {
#endif
error.printf("Could not create backend for --config %s\n", FLAGS_config[0]);
return NULL;
}
#if SK_SUPPORT_GPU
renderer->setSampleCount(sampleCount);
renderer->setUseDFText(useDFText);
#endif
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
}
sk_tools::PictureRenderer::BBoxHierarchyType bbhType
= sk_tools::PictureRenderer::kNone_BBoxHierarchyType;
if (FLAGS_bbh.count() > 0) {
const char* type = FLAGS_bbh[0];
if (0 == strcmp(type, "none")) {
bbhType = sk_tools::PictureRenderer::kNone_BBoxHierarchyType;
} else if (0 == strcmp(type, "rtree")) {
bbhType = sk_tools::PictureRenderer::kRTree_BBoxHierarchyType;
} else if (0 == strcmp(type, "grid")) {
if (!gridSupported) {
error.printf("'--bbh grid' is not compatible with --mode=%s.\n", mode);
return NULL;
}
bbhType = sk_tools::PictureRenderer::kTileGrid_BBoxHierarchyType;
if (FLAGS_bbh.count() != 3) {
error.printf("--bbh grid requires a width and a height.\n");
return NULL;
}
int gridWidth = atoi(FLAGS_bbh[1]);
int gridHeight = atoi(FLAGS_bbh[2]);
renderer->setGridSize(gridWidth, gridHeight);
} else {
error.printf("%s is not a valid value for --bbhType\n", type);
return NULL;
}
if (FLAGS_pipe && sk_tools::PictureRenderer::kNone_BBoxHierarchyType != bbhType) {
error.printf("--pipe and --bbh cannot be used together\n");
return NULL;
}
}
renderer->setBBoxHierarchyType(bbhType);
renderer->setScaleFactor(SkDoubleToScalar(FLAGS_scale));
return renderer.detach();
}