skia2/tests/PathOpsDebug.cpp

1717 lines
54 KiB
C++
Raw Normal View History

/*
* Copyright 2014 Google Inc.
*
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "PathOpsDebug.h"
#include "PathOpsTSectDebug.h"
#include "SkOpCoincidence.h"
#include "SkOpContour.h"
#include "SkIntersectionHelper.h"
#include "SkMutex.h"
#include "SkOpSegment.h"
#include "SkString.h"
bool PathOpsDebug::gJson;
bool PathOpsDebug::gOutFirst;
bool PathOpsDebug::gCheckForDuplicateNames;
bool PathOpsDebug::gOutputSVG;
FILE* PathOpsDebug::gOut;
inline void DebugDumpDouble(double x) {
if (x == floor(x)) {
SkDebugf("%.0f", x);
} else {
SkDebugf("%1.19g", x);
}
}
inline void DebugDumpFloat(float x) {
if (x == floorf(x)) {
SkDebugf("%.0f", x);
} else {
SkDebugf("%1.9gf", x);
}
}
inline void DebugDumpHexFloat(float x) {
SkDebugf("SkBits2Float(0x%08x)", SkFloat2Bits(x));
}
// if not defined by PathOpsDebug.cpp ...
#if !defined SK_DEBUG && FORCE_RELEASE
bool SkPathOpsDebug::ValidWind(int wind) {
return wind > SK_MinS32 + 0xFFFF && wind < SK_MaxS32 - 0xFFFF;
}
void SkPathOpsDebug::WindingPrintf(int wind) {
if (wind == SK_MinS32) {
SkDebugf("?");
} else {
SkDebugf("%d", wind);
}
}
#endif
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
static void DumpID(int id) {
SkDebugf("} ");
if (id >= 0) {
SkDebugf("id=%d", id);
}
SkDebugf("\n");
}
void SkDConic::dump() const {
dumpInner();
SkDebugf("},\n");
}
void SkDConic::dumpID(int id) const {
dumpInner();
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
DumpID(id);
}
void SkDConic::dumpInner() const {
Enabling clip stack flattening exercises path ops. Iterating through the 903K skps that represent the imagable 1M top web pages triggers a number of bugs, some of which are addressed here. Some web pages trigger intersecting cubic representations of arc with their conic counterparts. This exposed a flaw in coincident detection that caused an infinite loop. The loop alternatively extended the coincident section and, determining the that the bounds of the curve pairs did not overlap, deleted the extension. Track the number of times the coincident detection is called, and if it exceeds an empirically found limit, assume that the curves are coincident and force it to be so. The loop count limit can be determined by enabling DEBUG_T_SECT_LOOP_COUNT and running all tests. The largest count is reported on completion. Another class of bugs was caused by concident detection duplicating nearly identical points that had been merged earlier. To track these bugs, the 'handle coincidence' code was duplicated as a const debug variety that reported if one of a dozen or so irregularities are present; then it is easier to see when a block of code that fixes one irregularity regresses another. Creating the debug const code version exposed some non-debug code that could be const, and some that was experimental and could be removed. Set DEBUG_COINCIDENCE to track coincidence health and handling. For running on Chrome, DEBUG_VERIFY checks the result of pathops against the same operation using SkRegion to verify that the results are nearly the same. When visualizing the pathops work using tools/pathops_visualizer.htm, set DEBUG_DUMP_ALIGNMENT to see the curves after they've been aligned for coincidence. Other bugs fixed include detecting when a section of a pair of curves have devolved into lines and are coincident. TBR=reed@google.com Review URL: https://codereview.chromium.org/1394503003
2015-10-16 16:03:38 +00:00
SkDebugf("{");
fPts.dumpInner();
SkDebugf("}}, %1.9gf", fWeight);
}
void SkDCubic::dump() const {
this->dumpInner();
SkDebugf("}},\n");
}
void SkDCubic::dumpID(int id) const {
this->dumpInner();
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
SkDebugf("}");
DumpID(id);
}
static inline bool double_is_NaN(double x) { return x != x; }
void SkDCubic::dumpInner() const {
SkDebugf("{{");
int index = 0;
do {
if (index != 0) {
if (double_is_NaN(fPts[index].fX) && double_is_NaN(fPts[index].fY)) {
return;
}
SkDebugf(", ");
}
fPts[index].dump();
} while (++index < 3);
if (double_is_NaN(fPts[index].fX) && double_is_NaN(fPts[index].fY)) {
return;
}
SkDebugf(", ");
fPts[index].dump();
}
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
void SkDCurve::dump() const {
dumpID(-1);
}
void SkDCurve::dumpID(int id) const {
#ifndef SK_RELEASE
switch(fVerb) {
case SkPath::kLine_Verb:
fLine.dumpID(id);
break;
case SkPath::kQuad_Verb:
fQuad.dumpID(id);
break;
case SkPath::kConic_Verb:
fConic.dumpID(id);
break;
case SkPath::kCubic_Verb:
fCubic.dumpID(id);
break;
default:
SkASSERT(0);
}
#else
fCubic.dumpID(id);
#endif
}
void SkDLine::dump() const {
this->dumpInner();
SkDebugf("}},\n");
}
void SkDLine::dumpID(int id) const {
this->dumpInner();
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
SkDebugf("}");
DumpID(id);
}
void SkDLine::dumpInner() const {
SkDebugf("{{");
fPts[0].dump();
SkDebugf(", ");
fPts[1].dump();
}
void SkDPoint::dump() const {
SkDebugf("{");
DebugDumpDouble(fX);
SkDebugf(", ");
DebugDumpDouble(fY);
SkDebugf("}");
}
void SkDPoint::Dump(const SkPoint& pt) {
SkDebugf("{");
DebugDumpFloat(pt.fX);
SkDebugf(", ");
DebugDumpFloat(pt.fY);
SkDebugf("}");
}
void SkDPoint::DumpHex(const SkPoint& pt) {
SkDebugf("{");
DebugDumpHexFloat(pt.fX);
SkDebugf(", ");
DebugDumpHexFloat(pt.fY);
SkDebugf("}");
}
void SkDQuad::dump() const {
dumpInner();
SkDebugf("}},\n");
}
void SkDQuad::dumpID(int id) const {
dumpInner();
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
SkDebugf("}");
DumpID(id);
}
void SkDQuad::dumpInner() const {
SkDebugf("{{");
int index = 0;
do {
fPts[index].dump();
SkDebugf(", ");
} while (++index < 2);
fPts[index].dump();
}
void SkIntersections::dump() const {
SkDebugf("used=%d of %d", fUsed, fMax);
for (int index = 0; index < fUsed; ++index) {
SkDebugf(" t=(%s%1.9g,%s%1.9g) pt=(%1.9g,%1.9g)",
fIsCoincident[0] & (1 << index) ? "*" : "", fT[0][index],
fIsCoincident[1] & (1 << index) ? "*" : "", fT[1][index],
fPt[index].fX, fPt[index].fY);
if (index < 2 && fNearlySame[index]) {
SkDebugf(" pt2=(%1.9g,%1.9g)",fPt2[index].fX, fPt2[index].fY);
}
}
SkDebugf("\n");
}
namespace SkOpDebug {
const ::SkOpAngle* AngleAngle(const ::SkOpAngle* angle, int id) {
return angle->debugAngle(id);
}
::SkOpContour* AngleContour(::SkOpAngle* angle, int id) {
return angle->debugContour(id);
}
const ::SkOpPtT* AnglePtT(const ::SkOpAngle* angle, int id) {
return angle->debugPtT(id);
}
const ::SkOpSegment* AngleSegment(const ::SkOpAngle* angle, int id) {
return angle->debugSegment(id);
}
const ::SkOpSpanBase* AngleSpan(const ::SkOpAngle* angle, int id) {
return angle->debugSpan(id);
}
const ::SkOpAngle* ContourAngle(::SkOpContour* contour, int id) {
return contour->debugAngle(id);
}
::SkOpContour* ContourContour(::SkOpContour* contour, int id) {
return contour->debugContour(id);
}
const ::SkOpPtT* ContourPtT(::SkOpContour* contour, int id) {
return contour->debugPtT(id);
}
const ::SkOpSegment* ContourSegment(::SkOpContour* contour, int id) {
return contour->debugSegment(id);
}
const ::SkOpSpanBase* ContourSpan(::SkOpContour* contour, int id) {
return contour->debugSpan(id);
}
const ::SkOpAngle* CoincidenceAngle(::SkOpCoincidence* coin, int id) {
return coin->debugAngle(id);
}
::SkOpContour* CoincidenceContour(::SkOpCoincidence* coin, int id) {
return coin->debugContour(id);
}
const ::SkOpPtT* CoincidencePtT(::SkOpCoincidence* coin, int id) {
return coin->debugPtT(id);
}
const ::SkOpSegment* CoincidenceSegment(::SkOpCoincidence* coin, int id) {
return coin->debugSegment(id);
}
const ::SkOpSpanBase* CoincidenceSpan(::SkOpCoincidence* coin, int id) {
return coin->debugSpan(id);
}
const ::SkOpAngle* PtTAngle(const ::SkOpPtT* ptT, int id) {
return ptT->debugAngle(id);
}
::SkOpContour* PtTContour(::SkOpPtT* ptT, int id) {
return ptT->debugContour(id);
}
const ::SkOpPtT* PtTPtT(const ::SkOpPtT* ptT, int id) {
return ptT->debugPtT(id);
}
const ::SkOpSegment* PtTSegment(const ::SkOpPtT* ptT, int id) {
return ptT->debugSegment(id);
}
const ::SkOpSpanBase* PtTSpan(const ::SkOpPtT* ptT, int id) {
return ptT->debugSpan(id);
}
const ::SkOpAngle* SegmentAngle(const ::SkOpSegment* span, int id) {
return span->debugAngle(id);
}
::SkOpContour* SegmentContour(::SkOpSegment* span, int id) {
return span->debugContour(id);
}
const ::SkOpPtT* SegmentPtT(const ::SkOpSegment* span, int id) {
return span->debugPtT(id);
}
const ::SkOpSegment* SegmentSegment(const ::SkOpSegment* span, int id) {
return span->debugSegment(id);
}
const ::SkOpSpanBase* SegmentSpan(const ::SkOpSegment* span, int id) {
return span->debugSpan(id);
}
const ::SkOpAngle* SpanAngle(const ::SkOpSpanBase* span, int id) {
return span->debugAngle(id);
}
::SkOpContour* SpanContour(::SkOpSpanBase* span, int id) {
return span->debugContour(id);
}
const ::SkOpPtT* SpanPtT(const ::SkOpSpanBase* span, int id) {
return span->debugPtT(id);
}
const ::SkOpSegment* SpanSegment(const ::SkOpSpanBase* span, int id) {
return span->debugSegment(id);
}
const ::SkOpSpanBase* SpanSpan(const ::SkOpSpanBase* span, int id) {
return span->debugSpan(id);
}
} // namespace SkPathOpsDebug
#if DEBUG_COIN
void SkPathOpsDebug::DumpCoinDict() {
SkPathOpsDebug::gCoinSumChangedDict.dump("unused coin algorithm", false);
SkPathOpsDebug::gCoinSumVisitedDict.dump("visited coin function", true);
}
void SkPathOpsDebug::CoinDict::dump(const char* str, bool visitCheck) const {
int count = fDict.count();
for (int index = 0; index < count; ++index) {
const auto& entry = fDict[index];
if (visitCheck || entry.fGlitchType == kUninitialized_Glitch) {
SkDebugf("%s %s : line %d iteration %d", str, entry.fFunctionName,
entry.fLineNumber, entry.fIteration);
DumpGlitchType(entry.fGlitchType);
SkDebugf("\n");
}
}
}
#endif
void SkOpContour::dumpContours() const {
SkOpContour* contour = this->globalState()->contourHead();
do {
contour->dump();
} while ((contour = contour->next()));
}
void SkOpContour::dumpContoursAll() const {
SkOpContour* contour = this->globalState()->contourHead();
do {
contour->dumpAll();
} while ((contour = contour->next()));
}
void SkOpContour::dumpContoursAngles() const {
SkOpContour* contour = this->globalState()->contourHead();
do {
contour->dumpAngles();
} while ((contour = contour->next()));
}
void SkOpContour::dumpContoursPts() const {
SkOpContour* contour = this->globalState()->contourHead();
do {
contour->dumpPts();
} while ((contour = contour->next()));
}
void SkOpContour::dumpContoursPt(int segmentID) const {
SkOpContour* contour = this->globalState()->contourHead();
do {
contour->dumpPt(segmentID);
} while ((contour = contour->next()));
}
void SkOpContour::dumpContoursSegment(int segmentID) const {
SkOpContour* contour = this->globalState()->contourHead();
do {
contour->dumpSegment(segmentID);
} while ((contour = contour->next()));
}
void SkOpContour::dumpContoursSpan(int spanID) const {
SkOpContour* contour = this->globalState()->contourHead();
do {
contour->dumpSpan(spanID);
} while ((contour = contour->next()));
}
void SkOpContour::dumpContoursSpans() const {
SkOpContour* contour = this->globalState()->contourHead();
do {
contour->dumpSpans();
} while ((contour = contour->next()));
}
template <typename TCurve, typename OppCurve>
const SkTSpan<TCurve, OppCurve>* DebugSpan(const SkTSect<TCurve, OppCurve>* sect, int id) {
return sect->debugSpan(id);
}
void DontCallDebugSpan(int id);
void DontCallDebugSpan(int id) { // exists to instantiate the templates
SkDQuad quad;
SkDConic conic;
SkDCubic cubic;
SkTSect<SkDQuad, SkDQuad> q1q2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDConic> q1k2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDCubic> q1c2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDQuad> k1q2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDConic> k1k2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDCubic> k1c2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDQuad> c1q2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDConic> c1k2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDCubic> c1c2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
DebugSpan(&q1q2, id);
DebugSpan(&q1k2, id);
DebugSpan(&q1c2, id);
DebugSpan(&k1q2, id);
DebugSpan(&k1k2, id);
DebugSpan(&k1c2, id);
DebugSpan(&c1q2, id);
DebugSpan(&c1k2, id);
DebugSpan(&c1c2, id);
}
template <typename TCurve, typename OppCurve>
const SkTSpan<TCurve, OppCurve>* DebugT(const SkTSect<TCurve, OppCurve>* sect, double t) {
return sect->debugT(t);
}
void DontCallDebugT(double t);
void DontCallDebugT(double t) { // exists to instantiate the templates
SkDQuad quad;
SkDConic conic;
SkDCubic cubic;
SkTSect<SkDQuad, SkDQuad> q1q2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDConic> q1k2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDCubic> q1c2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDQuad> k1q2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDConic> k1k2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDCubic> k1c2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDQuad> c1q2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDConic> c1k2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDCubic> c1c2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
DebugT(&q1q2, t);
DebugT(&q1k2, t);
DebugT(&q1c2, t);
DebugT(&k1q2, t);
DebugT(&k1k2, t);
DebugT(&k1c2, t);
DebugT(&c1q2, t);
DebugT(&c1k2, t);
DebugT(&c1c2, t);
}
template <typename TCurve, typename OppCurve>
void Dump(const SkTSect<TCurve, OppCurve>* sect) {
sect->dump();
}
void DontCallDumpTSect();
void DontCallDumpTSect() { // exists to instantiate the templates
SkDQuad quad;
SkDConic conic;
SkDCubic cubic;
SkTSect<SkDQuad, SkDQuad> q1q2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDConic> q1k2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDCubic> q1c2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDQuad> k1q2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDConic> k1k2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDCubic> k1c2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDQuad> c1q2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDConic> c1k2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDCubic> c1c2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
Dump(&q1q2);
Dump(&q1k2);
Dump(&q1c2);
Dump(&k1q2);
Dump(&k1k2);
Dump(&k1c2);
Dump(&c1q2);
Dump(&c1k2);
Dump(&c1c2);
}
template <typename TCurve, typename OppCurve>
void DumpBoth(SkTSect<TCurve, OppCurve>* sect1, SkTSect<OppCurve, TCurve>* sect2) {
sect1->dumpBoth(sect2);
}
void DontCallDumpBoth();
void DontCallDumpBoth() { // exists to instantiate the templates
SkDQuad quad;
SkDConic conic;
SkDCubic cubic;
SkTSect<SkDQuad, SkDQuad> q1q2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDConic> q1k2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDCubic> q1c2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDQuad> k1q2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDConic> k1k2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDCubic> k1c2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDQuad> c1q2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDConic> c1k2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDCubic> c1c2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
DumpBoth(&q1q2, &q1q2);
DumpBoth(&q1k2, &k1q2);
DumpBoth(&q1c2, &c1q2);
DumpBoth(&k1q2, &q1k2);
DumpBoth(&k1k2, &k1k2);
DumpBoth(&k1c2, &c1k2);
DumpBoth(&c1q2, &q1c2);
DumpBoth(&c1k2, &k1c2);
DumpBoth(&c1c2, &c1c2);
}
template <typename TCurve, typename OppCurve>
void DumpBounded(SkTSect<TCurve, OppCurve>* sect1, int id) {
sect1->dumpBounded(id);
}
void DontCallDumpBounded();
void DontCallDumpBounded() {
SkDQuad quad;
SkDConic conic;
SkDCubic cubic;
SkTSect<SkDQuad, SkDQuad> q1q2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDConic> q1k2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDCubic> q1c2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDQuad> k1q2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDConic> k1k2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDCubic> k1c2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDQuad> c1q2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDConic> c1k2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDCubic> c1c2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
DumpBounded(&q1q2, 0);
DumpBounded(&q1k2, 0);
DumpBounded(&q1c2, 0);
DumpBounded(&k1q2, 0);
DumpBounded(&k1k2, 0);
DumpBounded(&k1c2, 0);
DumpBounded(&c1q2, 0);
DumpBounded(&c1k2, 0);
DumpBounded(&c1c2, 0);
}
template <typename TCurve, typename OppCurve>
void DumpBounds(SkTSect<TCurve, OppCurve>* sect1) {
sect1->dumpBounds();
}
void DontCallDumpBounds();
void DontCallDumpBounds() {
SkDQuad quad;
SkDConic conic;
SkDCubic cubic;
SkTSect<SkDQuad, SkDQuad> q1q2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDConic> q1k2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDCubic> q1c2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDQuad> k1q2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDConic> k1k2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDCubic> k1c2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDQuad> c1q2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDConic> c1k2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDCubic> c1c2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
DumpBounds(&q1q2);
DumpBounds(&q1k2);
DumpBounds(&q1c2);
DumpBounds(&k1q2);
DumpBounds(&k1k2);
DumpBounds(&k1c2);
DumpBounds(&c1q2);
DumpBounds(&c1k2);
DumpBounds(&c1c2);
}
template <typename TCurve, typename OppCurve>
void DumpCoin(SkTSect<TCurve, OppCurve>* sect1) {
sect1->dumpCoin();
}
void DontCallDumpCoin();
void DontCallDumpCoin() { // exists to instantiate the templates
SkDQuad quad;
SkDConic conic;
SkDCubic cubic;
SkTSect<SkDQuad, SkDQuad> q1q2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDConic> q1k2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDCubic> q1c2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDQuad> k1q2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDConic> k1k2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDCubic> k1c2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDQuad> c1q2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDConic> c1k2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDCubic> c1c2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
DumpCoin(&q1q2);
DumpCoin(&q1k2);
DumpCoin(&q1c2);
DumpCoin(&k1q2);
DumpCoin(&k1k2);
DumpCoin(&k1c2);
DumpCoin(&c1q2);
DumpCoin(&c1k2);
DumpCoin(&c1c2);
}
template <typename TCurve, typename OppCurve>
void DumpCoinCurves(SkTSect<TCurve, OppCurve>* sect1) {
sect1->dumpCoinCurves();
}
void DontCallDumpCoinCurves();
void DontCallDumpCoinCurves() { // exists to instantiate the templates
SkDQuad quad;
SkDConic conic;
SkDCubic cubic;
SkTSect<SkDQuad, SkDQuad> q1q2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDConic> q1k2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDCubic> q1c2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDQuad> k1q2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDConic> k1k2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDCubic> k1c2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDQuad> c1q2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDConic> c1k2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDCubic> c1c2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
DumpCoinCurves(&q1q2);
DumpCoinCurves(&q1k2);
DumpCoinCurves(&q1c2);
DumpCoinCurves(&k1q2);
DumpCoinCurves(&k1k2);
DumpCoinCurves(&k1c2);
DumpCoinCurves(&c1q2);
DumpCoinCurves(&c1k2);
DumpCoinCurves(&c1c2);
}
template <typename TCurve, typename OppCurve>
void DumpCurves(const SkTSect<TCurve, OppCurve>* sect) {
sect->dumpCurves();
}
void DontCallDumpCurves();
void DontCallDumpCurves() { // exists to instantiate the templates
SkDQuad quad;
SkDConic conic;
SkDCubic cubic;
SkTSect<SkDQuad, SkDQuad> q1q2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDConic> q1k2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDQuad, SkDCubic> q1c2(quad SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDQuad> k1q2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDConic> k1k2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDConic, SkDCubic> k1c2(conic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDQuad> c1q2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDConic> c1k2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
SkTSect<SkDCubic, SkDCubic> c1c2(cubic SkDEBUGPARAMS(nullptr) PATH_OPS_DEBUG_T_SECT_PARAMS(1));
DumpCurves(&q1q2);
DumpCurves(&q1k2);
DumpCurves(&q1c2);
DumpCurves(&k1q2);
DumpCurves(&k1k2);
DumpCurves(&k1c2);
DumpCurves(&c1q2);
DumpCurves(&c1k2);
DumpCurves(&c1c2);
}
template <typename TCurve, typename OppCurve>
void Dump(const SkTSpan<TCurve, OppCurve>* span) {
span->dump();
}
void DontCallDumpTSpan();
void DontCallDumpTSpan() { // exists to instantiate the templates
SkTSpan<SkDQuad, SkDQuad> q1q2; q1q2.debugInit();
SkTSpan<SkDQuad, SkDConic> q1k2; q1k2.debugInit();
SkTSpan<SkDQuad, SkDCubic> q1c2; q1c2.debugInit();
SkTSpan<SkDConic, SkDQuad> k1q2; k1q2.debugInit();
SkTSpan<SkDConic, SkDConic> k1k2; k1k2.debugInit();
SkTSpan<SkDConic, SkDCubic> k1c2; k1c2.debugInit();
SkTSpan<SkDCubic, SkDQuad> c1q2; c1q2.debugInit();
SkTSpan<SkDCubic, SkDConic> c1k2; c1k2.debugInit();
SkTSpan<SkDCubic, SkDCubic> c1c2; c1c2.debugInit();
Dump(&q1q2);
Dump(&q1k2);
Dump(&q1c2);
Dump(&k1q2);
Dump(&k1k2);
Dump(&k1c2);
Dump(&c1q2);
Dump(&c1k2);
Dump(&c1c2);
}
Enabling clip stack flattening exercises path ops. Iterating through the 903K skps that represent the imagable 1M top web pages triggers a number of bugs, some of which are addressed here. Some web pages trigger intersecting cubic representations of arc with their conic counterparts. This exposed a flaw in coincident detection that caused an infinite loop. The loop alternatively extended the coincident section and, determining the that the bounds of the curve pairs did not overlap, deleted the extension. Track the number of times the coincident detection is called, and if it exceeds an empirically found limit, assume that the curves are coincident and force it to be so. The loop count limit can be determined by enabling DEBUG_T_SECT_LOOP_COUNT and running all tests. The largest count is reported on completion. Another class of bugs was caused by concident detection duplicating nearly identical points that had been merged earlier. To track these bugs, the 'handle coincidence' code was duplicated as a const debug variety that reported if one of a dozen or so irregularities are present; then it is easier to see when a block of code that fixes one irregularity regresses another. Creating the debug const code version exposed some non-debug code that could be const, and some that was experimental and could be removed. Set DEBUG_COINCIDENCE to track coincidence health and handling. For running on Chrome, DEBUG_VERIFY checks the result of pathops against the same operation using SkRegion to verify that the results are nearly the same. When visualizing the pathops work using tools/pathops_visualizer.htm, set DEBUG_DUMP_ALIGNMENT to see the curves after they've been aligned for coincidence. Other bugs fixed include detecting when a section of a pair of curves have devolved into lines and are coincident. TBR=reed@google.com Review URL: https://codereview.chromium.org/1394503003
2015-10-16 16:03:38 +00:00
template <typename TCurve, typename OppCurve>
void DumpAll(const SkTSpan<TCurve, OppCurve>* span) {
span->dumpAll();
}
void DontCallDumpSpanAll();
void DontCallDumpSpanAll() { // exists to instantiate the templates
SkTSpan<SkDQuad, SkDQuad> q1q2; q1q2.debugInit();
SkTSpan<SkDQuad, SkDConic> q1k2; q1k2.debugInit();
SkTSpan<SkDQuad, SkDCubic> q1c2; q1c2.debugInit();
SkTSpan<SkDConic, SkDQuad> k1q2; k1q2.debugInit();
SkTSpan<SkDConic, SkDConic> k1k2; k1k2.debugInit();
SkTSpan<SkDConic, SkDCubic> k1c2; k1c2.debugInit();
SkTSpan<SkDCubic, SkDQuad> c1q2; c1q2.debugInit();
SkTSpan<SkDCubic, SkDConic> c1k2; c1k2.debugInit();
SkTSpan<SkDCubic, SkDCubic> c1c2; c1c2.debugInit();
DumpAll(&q1q2);
DumpAll(&q1k2);
DumpAll(&q1c2);
DumpAll(&k1q2);
DumpAll(&k1k2);
DumpAll(&k1c2);
DumpAll(&c1q2);
DumpAll(&c1k2);
DumpAll(&c1c2);
}
template <typename TCurve, typename OppCurve>
void DumpBounded(const SkTSpan<TCurve, OppCurve>* span) {
span->dumpBounded(0);
}
void DontCallDumpSpanBounded();
void DontCallDumpSpanBounded() { // exists to instantiate the templates
SkTSpan<SkDQuad, SkDQuad> q1q2; q1q2.debugInit();
SkTSpan<SkDQuad, SkDConic> q1k2; q1k2.debugInit();
SkTSpan<SkDQuad, SkDCubic> q1c2; q1c2.debugInit();
SkTSpan<SkDConic, SkDQuad> k1q2; k1q2.debugInit();
SkTSpan<SkDConic, SkDConic> k1k2; k1k2.debugInit();
SkTSpan<SkDConic, SkDCubic> k1c2; k1c2.debugInit();
SkTSpan<SkDCubic, SkDQuad> c1q2; c1q2.debugInit();
SkTSpan<SkDCubic, SkDConic> c1k2; c1k2.debugInit();
SkTSpan<SkDCubic, SkDCubic> c1c2; c1c2.debugInit();
DumpBounded(&q1q2);
DumpBounded(&q1k2);
DumpBounded(&q1c2);
DumpBounded(&k1q2);
DumpBounded(&k1k2);
DumpBounded(&k1c2);
DumpBounded(&c1q2);
DumpBounded(&c1k2);
DumpBounded(&c1c2);
}
template <typename TCurve, typename OppCurve>
void DumpCoin(const SkTSpan<TCurve, OppCurve>* span) {
span->dumpCoin();
}
void DontCallDumpSpanCoin();
void DontCallDumpSpanCoin() { // exists to instantiate the templates
SkTSpan<SkDQuad, SkDQuad> q1q2; q1q2.debugInit();
SkTSpan<SkDQuad, SkDConic> q1k2; q1k2.debugInit();
SkTSpan<SkDQuad, SkDCubic> q1c2; q1c2.debugInit();
SkTSpan<SkDConic, SkDQuad> k1q2; k1q2.debugInit();
SkTSpan<SkDConic, SkDConic> k1k2; k1k2.debugInit();
SkTSpan<SkDConic, SkDCubic> k1c2; k1c2.debugInit();
SkTSpan<SkDCubic, SkDQuad> c1q2; c1q2.debugInit();
SkTSpan<SkDCubic, SkDConic> c1k2; c1k2.debugInit();
SkTSpan<SkDCubic, SkDCubic> c1c2; c1c2.debugInit();
DumpCoin(&q1q2);
DumpCoin(&q1k2);
DumpCoin(&q1c2);
DumpCoin(&k1q2);
DumpCoin(&k1k2);
DumpCoin(&k1c2);
DumpCoin(&c1q2);
DumpCoin(&c1k2);
DumpCoin(&c1c2);
}
static void dumpTestCase(const SkDQuad& quad1, const SkDQuad& quad2, int testNo) {
SkDebugf("\n<div id=\"quad%d\">\n", testNo);
quad1.dumpInner();
SkDebugf("}}, ");
quad2.dump();
SkDebugf("</div>\n\n");
}
static void dumpTestTrailer() {
SkDebugf("</div>\n\n<script type=\"text/javascript\">\n\n");
SkDebugf(" var testDivs = [\n");
}
static void dumpTestList(int testNo, double min) {
SkDebugf(" quad%d,", testNo);
if (min > 0) {
SkDebugf(" // %1.9g", min);
}
SkDebugf("\n");
}
void DumpQ(const SkDQuad& quad1, const SkDQuad& quad2, int testNo) {
SkDebugf("\n");
dumpTestCase(quad1, quad2, testNo);
dumpTestTrailer();
dumpTestList(testNo, 0);
SkDebugf("\n");
}
void DumpT(const SkDQuad& quad, double t) {
SkDLine line = {{quad.ptAtT(t), quad[0]}};
line.dump();
}
const SkOpAngle* SkOpAngle::debugAngle(int id) const {
return this->segment()->debugAngle(id);
}
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
const SkOpCoincidence* SkOpAngle::debugCoincidence() const {
return this->segment()->debugCoincidence();
}
SkOpContour* SkOpAngle::debugContour(int id) const {
return this->segment()->debugContour(id);
}
const SkOpPtT* SkOpAngle::debugPtT(int id) const {
return this->segment()->debugPtT(id);
}
const SkOpSegment* SkOpAngle::debugSegment(int id) const {
return this->segment()->debugSegment(id);
}
int SkOpAngle::debugSign() const {
SkASSERT(fStart->t() != fEnd->t());
return fStart->t() < fEnd->t() ? -1 : 1;
}
const SkOpSpanBase* SkOpAngle::debugSpan(int id) const {
return this->segment()->debugSpan(id);
}
void SkOpAngle::dump() const {
dumpOne(true);
SkDebugf("\n");
}
void SkOpAngle::dumpOne(bool functionHeader) const {
// fSegment->debugValidate();
const SkOpSegment* segment = this->segment();
const SkOpSpan& mSpan = *fStart->starter(fEnd);
if (functionHeader) {
SkDebugf("%s ", __FUNCTION__);
}
SkDebugf("[%d", segment->debugID());
SkDebugf("/%d", debugID());
SkDebugf("] next=");
if (fNext) {
SkDebugf("%d", fNext->fStart->segment()->debugID());
SkDebugf("/%d", fNext->debugID());
} else {
SkDebugf("?");
}
SkDebugf(" sect=%d/%d ", fSectorStart, fSectorEnd);
SkDebugf(" s=%1.9g [%d] e=%1.9g [%d]", fStart->t(), fStart->debugID(),
fEnd->t(), fEnd->debugID());
SkDebugf(" sgn=%d windVal=%d", this->debugSign(), mSpan.windValue());
SkDebugf(" windSum=");
SkPathOpsDebug::WindingPrintf(mSpan.windSum());
if (mSpan.oppValue() != 0 || mSpan.oppSum() != SK_MinS32) {
SkDebugf(" oppVal=%d", mSpan.oppValue());
SkDebugf(" oppSum=");
SkPathOpsDebug::WindingPrintf(mSpan.oppSum());
}
if (mSpan.done()) {
SkDebugf(" done");
}
if (unorderable()) {
SkDebugf(" unorderable");
}
if (segment->operand()) {
SkDebugf(" operand");
}
}
void SkOpAngle::dumpTo(const SkOpSegment* segment, const SkOpAngle* to) const {
const SkOpAngle* first = this;
const SkOpAngle* next = this;
const char* indent = "";
do {
SkDebugf("%s", indent);
next->dumpOne(false);
if (segment == next->fStart->segment()) {
if (this == fNext) {
SkDebugf(" << from");
}
if (to == fNext) {
SkDebugf(" << to");
}
}
SkDebugf("\n");
indent = " ";
next = next->fNext;
} while (next && next != first);
}
void SkOpAngle::dumpCurves() const {
const SkOpAngle* first = this;
const SkOpAngle* next = this;
do {
next->fPart.fCurve.dumpID(next->segment()->debugID());
next = next->fNext;
} while (next && next != first);
}
void SkOpAngle::dumpLoop() const {
const SkOpAngle* first = this;
const SkOpAngle* next = this;
do {
next->dumpOne(false);
SkDebugf("\n");
next = next->fNext;
} while (next && next != first);
}
void SkOpAngle::dumpTest() const {
const SkOpAngle* first = this;
const SkOpAngle* next = this;
do {
SkDebugf("{ ");
SkOpSegment* segment = next->segment();
segment->dumpPts();
SkDebugf(", %d, %1.9g, %1.9g, {} },\n", SkPathOpsVerbToPoints(segment->verb()) + 1,
next->start()->t(), next->end()->t());
next = next->fNext;
} while (next && next != first);
}
bool SkOpPtT::debugMatchID(int id) const {
int limit = this->debugLoopLimit(false);
int loop = 0;
const SkOpPtT* ptT = this;
do {
if (ptT->debugID() == id) {
return true;
}
} while ((!limit || ++loop <= limit) && (ptT = ptT->next()) && ptT != this);
return false;
}
const SkOpAngle* SkOpPtT::debugAngle(int id) const {
return this->span()->debugAngle(id);
}
SkOpContour* SkOpPtT::debugContour(int id) const {
return this->span()->debugContour(id);
}
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
const SkOpCoincidence* SkOpPtT::debugCoincidence() const {
return this->span()->debugCoincidence();
}
const SkOpPtT* SkOpPtT::debugPtT(int id) const {
return this->span()->debugPtT(id);
}
const SkOpSegment* SkOpPtT::debugSegment(int id) const {
return this->span()->debugSegment(id);
}
const SkOpSpanBase* SkOpPtT::debugSpan(int id) const {
return this->span()->debugSpan(id);
}
void SkOpPtT::dump() const {
SkDebugf("seg=%d span=%d ptT=%d",
this->segment()->debugID(), this->span()->debugID(), this->debugID());
this->dumpBase();
SkDebugf("\n");
}
void SkOpPtT::dumpAll() const {
contour()->indentDump();
const SkOpPtT* next = this;
int limit = debugLoopLimit(true);
int loop = 0;
do {
SkDebugf("%.*s", contour()->debugIndent(), " ");
SkDebugf("seg=%d span=%d ptT=%d",
next->segment()->debugID(), next->span()->debugID(), next->debugID());
next->dumpBase();
SkDebugf("\n");
if (limit && ++loop >= limit) {
SkDebugf("*** abort loop ***\n");
break;
}
} while ((next = next->fNext) && next != this);
contour()->outdentDump();
}
void SkOpPtT::dumpBase() const {
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
SkDebugf(" t=%1.9g pt=(%1.9g,%1.9g)%s%s%s", this->fT, this->fPt.fX, this->fPt.fY,
this->fCoincident ? " coin" : "",
this->fDuplicatePt ? " dup" : "", this->fDeleted ? " deleted" : "");
}
const SkOpAngle* SkOpSpanBase::debugAngle(int id) const {
return this->segment()->debugAngle(id);
}
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
const SkOpCoincidence* SkOpSpanBase::debugCoincidence() const {
return this->segment()->debugCoincidence();
}
SkOpContour* SkOpSpanBase::debugContour(int id) const {
return this->segment()->debugContour(id);
}
const SkOpPtT* SkOpSpanBase::debugPtT(int id) const {
return this->segment()->debugPtT(id);
}
const SkOpSegment* SkOpSpanBase::debugSegment(int id) const {
return this->segment()->debugSegment(id);
}
const SkOpSpanBase* SkOpSpanBase::debugSpan(int id) const {
return this->segment()->debugSpan(id);
}
void SkOpSpanBase::dump() const {
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
this->dumpHead();
this->fPtT.dump();
}
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
void SkOpSpanBase::dumpHead() const {
SkDebugf("%.*s", contour()->debugIndent(), " ");
SkDebugf("seg=%d span=%d", this->segment()->debugID(), this->debugID());
this->dumpBase();
SkDebugf("\n");
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
}
void SkOpSpanBase::dumpAll() const {
this->dumpHead();
this->fPtT.dumpAll();
}
void SkOpSpanBase::dumpBase() const {
if (this->fAligned) {
SkDebugf(" aligned");
}
if (this->fChased) {
SkDebugf(" chased");
}
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
#ifdef SK_DEBUG
if (this->fDebugDeleted) {
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
SkDebugf(" deleted");
}
#endif
if (!this->final()) {
this->upCast()->dumpSpan();
}
const SkOpSpanBase* coin = this->coinEnd();
if (this != coin) {
SkDebugf(" coinEnd seg/span=%d/%d", coin->segment()->debugID(), coin->debugID());
} else if (this->final() || !this->upCast()->isCoincident()) {
const SkOpPtT* oPt = this->ptT()->next();
SkDebugf(" seg/span=%d/%d", oPt->segment()->debugID(), oPt->span()->debugID());
}
SkDebugf(" adds=%d", fSpanAdds);
}
void SkOpSpanBase::dumpCoin() const {
const SkOpSpan* span = this->upCastable();
if (!span) {
return;
}
if (!span->isCoincident()) {
return;
}
span->dumpCoin();
}
void SkOpSpan::dumpCoin() const {
const SkOpSpan* coincident = fCoincident;
bool ok = debugCoinLoopCheck();
this->dump();
int loop = 0;
do {
coincident->dump();
if (!ok && ++loop > 10) {
SkDebugf("*** abort loop ***\n");
break;
}
} while ((coincident = coincident->fCoincident) != this);
}
bool SkOpSpan::dumpSpan() const {
SkOpSpan* coin = fCoincident;
if (this != coin) {
SkDebugf(" coinStart seg/span=%d/%d", coin->segment()->debugID(), coin->debugID());
}
SkDebugf(" windVal=%d", this->windValue());
SkDebugf(" windSum=");
SkPathOpsDebug::WindingPrintf(this->windSum());
if (this->oppValue() != 0 || this->oppSum() != SK_MinS32) {
SkDebugf(" oppVal=%d", this->oppValue());
SkDebugf(" oppSum=");
SkPathOpsDebug::WindingPrintf(this->oppSum());
}
if (this->done()) {
SkDebugf(" done");
}
return this != coin;
}
const SkOpAngle* SkOpSegment::debugAngle(int id) const {
return this->contour()->debugAngle(id);
}
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
const SkOpCoincidence* SkOpSegment::debugCoincidence() const {
return this->contour()->debugCoincidence();
}
SkOpContour* SkOpSegment::debugContour(int id) const {
return this->contour()->debugContour(id);
}
const SkOpPtT* SkOpSegment::debugPtT(int id) const {
return this->contour()->debugPtT(id);
}
const SkOpSegment* SkOpSegment::debugSegment(int id) const {
return this->contour()->debugSegment(id);
}
const SkOpSpanBase* SkOpSegment::debugSpan(int id) const {
return this->contour()->debugSpan(id);
}
void SkOpSegment::dump() const {
SkDebugf("%.*s", contour()->debugIndent(), " ");
this->dumpPts();
const SkOpSpanBase* span = &fHead;
contour()->indentDump();
do {
SkDebugf("%.*s span=%d ", contour()->debugIndent(), " ", span->debugID());
span->ptT()->dumpBase();
span->dumpBase();
SkDebugf("\n");
} while (!span->final() && (span = span->upCast()->next()));
contour()->outdentDump();
}
void SkOpSegment::dumpAll() const {
SkDebugf("%.*s", contour()->debugIndent(), " ");
this->dumpPts();
const SkOpSpanBase* span = &fHead;
contour()->indentDump();
do {
span->dumpAll();
} while (!span->final() && (span = span->upCast()->next()));
contour()->outdentDump();
}
void SkOpSegment::dumpAngles() const {
SkDebugf("seg=%d\n", debugID());
const SkOpSpanBase* span = &fHead;
do {
const SkOpAngle* fAngle = span->fromAngle();
const SkOpAngle* tAngle = span->final() ? nullptr : span->upCast()->toAngle();
if (fAngle) {
SkDebugf(" span=%d from=%d ", span->debugID(), fAngle->debugID());
fAngle->dumpTo(this, tAngle);
}
if (tAngle) {
SkDebugf(" span=%d to=%d ", span->debugID(), tAngle->debugID());
tAngle->dumpTo(this, fAngle);
}
} while (!span->final() && (span = span->upCast()->next()));
}
void SkOpSegment::dumpCoin() const {
const SkOpSpan* span = &fHead;
do {
span->dumpCoin();
} while ((span = span->next()->upCastable()));
}
Enabling clip stack flattening exercises path ops. Iterating through the 903K skps that represent the imagable 1M top web pages triggers a number of bugs, some of which are addressed here. Some web pages trigger intersecting cubic representations of arc with their conic counterparts. This exposed a flaw in coincident detection that caused an infinite loop. The loop alternatively extended the coincident section and, determining the that the bounds of the curve pairs did not overlap, deleted the extension. Track the number of times the coincident detection is called, and if it exceeds an empirically found limit, assume that the curves are coincident and force it to be so. The loop count limit can be determined by enabling DEBUG_T_SECT_LOOP_COUNT and running all tests. The largest count is reported on completion. Another class of bugs was caused by concident detection duplicating nearly identical points that had been merged earlier. To track these bugs, the 'handle coincidence' code was duplicated as a const debug variety that reported if one of a dozen or so irregularities are present; then it is easier to see when a block of code that fixes one irregularity regresses another. Creating the debug const code version exposed some non-debug code that could be const, and some that was experimental and could be removed. Set DEBUG_COINCIDENCE to track coincidence health and handling. For running on Chrome, DEBUG_VERIFY checks the result of pathops against the same operation using SkRegion to verify that the results are nearly the same. When visualizing the pathops work using tools/pathops_visualizer.htm, set DEBUG_DUMP_ALIGNMENT to see the curves after they've been aligned for coincidence. Other bugs fixed include detecting when a section of a pair of curves have devolved into lines and are coincident. TBR=reed@google.com Review URL: https://codereview.chromium.org/1394503003
2015-10-16 16:03:38 +00:00
void SkOpSegment::dumpPtsInner(const char* prefix) const {
int last = SkPathOpsVerbToPoints(fVerb);
Enabling clip stack flattening exercises path ops. Iterating through the 903K skps that represent the imagable 1M top web pages triggers a number of bugs, some of which are addressed here. Some web pages trigger intersecting cubic representations of arc with their conic counterparts. This exposed a flaw in coincident detection that caused an infinite loop. The loop alternatively extended the coincident section and, determining the that the bounds of the curve pairs did not overlap, deleted the extension. Track the number of times the coincident detection is called, and if it exceeds an empirically found limit, assume that the curves are coincident and force it to be so. The loop count limit can be determined by enabling DEBUG_T_SECT_LOOP_COUNT and running all tests. The largest count is reported on completion. Another class of bugs was caused by concident detection duplicating nearly identical points that had been merged earlier. To track these bugs, the 'handle coincidence' code was duplicated as a const debug variety that reported if one of a dozen or so irregularities are present; then it is easier to see when a block of code that fixes one irregularity regresses another. Creating the debug const code version exposed some non-debug code that could be const, and some that was experimental and could be removed. Set DEBUG_COINCIDENCE to track coincidence health and handling. For running on Chrome, DEBUG_VERIFY checks the result of pathops against the same operation using SkRegion to verify that the results are nearly the same. When visualizing the pathops work using tools/pathops_visualizer.htm, set DEBUG_DUMP_ALIGNMENT to see the curves after they've been aligned for coincidence. Other bugs fixed include detecting when a section of a pair of curves have devolved into lines and are coincident. TBR=reed@google.com Review URL: https://codereview.chromium.org/1394503003
2015-10-16 16:03:38 +00:00
SkDebugf("%s=%d {{", prefix, this->debugID());
if (fVerb == SkPath::kConic_Verb) {
SkDebugf("{");
}
int index = 0;
do {
SkDPoint::Dump(fPts[index]);
SkDebugf(", ");
} while (++index < last);
SkDPoint::Dump(fPts[index]);
SkDebugf("}}");
if (fVerb == SkPath::kConic_Verb) {
SkDebugf(", %1.9gf}", fWeight);
}
}
Enabling clip stack flattening exercises path ops. Iterating through the 903K skps that represent the imagable 1M top web pages triggers a number of bugs, some of which are addressed here. Some web pages trigger intersecting cubic representations of arc with their conic counterparts. This exposed a flaw in coincident detection that caused an infinite loop. The loop alternatively extended the coincident section and, determining the that the bounds of the curve pairs did not overlap, deleted the extension. Track the number of times the coincident detection is called, and if it exceeds an empirically found limit, assume that the curves are coincident and force it to be so. The loop count limit can be determined by enabling DEBUG_T_SECT_LOOP_COUNT and running all tests. The largest count is reported on completion. Another class of bugs was caused by concident detection duplicating nearly identical points that had been merged earlier. To track these bugs, the 'handle coincidence' code was duplicated as a const debug variety that reported if one of a dozen or so irregularities are present; then it is easier to see when a block of code that fixes one irregularity regresses another. Creating the debug const code version exposed some non-debug code that could be const, and some that was experimental and could be removed. Set DEBUG_COINCIDENCE to track coincidence health and handling. For running on Chrome, DEBUG_VERIFY checks the result of pathops against the same operation using SkRegion to verify that the results are nearly the same. When visualizing the pathops work using tools/pathops_visualizer.htm, set DEBUG_DUMP_ALIGNMENT to see the curves after they've been aligned for coincidence. Other bugs fixed include detecting when a section of a pair of curves have devolved into lines and are coincident. TBR=reed@google.com Review URL: https://codereview.chromium.org/1394503003
2015-10-16 16:03:38 +00:00
void SkOpSegment::dumpPts(const char* prefix) const {
dumpPtsInner(prefix);
SkDebugf("\n");
}
void SkCoincidentSpans::dump() const {
SkDebugf("- seg=%d span=%d ptT=%d ", fCoinPtTStart->segment()->debugID(),
fCoinPtTStart->span()->debugID(), fCoinPtTStart->debugID());
fCoinPtTStart->dumpBase();
SkDebugf(" span=%d ptT=%d ", fCoinPtTEnd->span()->debugID(), fCoinPtTEnd->debugID());
fCoinPtTEnd->dumpBase();
if (fCoinPtTStart->segment()->operand()) {
SkDebugf(" operand");
}
if (fCoinPtTStart->segment()->isXor()) {
SkDebugf(" xor");
}
SkDebugf("\n");
SkDebugf("+ seg=%d span=%d ptT=%d ", fOppPtTStart->segment()->debugID(),
fOppPtTStart->span()->debugID(), fOppPtTStart->debugID());
fOppPtTStart->dumpBase();
SkDebugf(" span=%d ptT=%d ", fOppPtTEnd->span()->debugID(), fOppPtTEnd->debugID());
fOppPtTEnd->dumpBase();
if (fOppPtTStart->segment()->operand()) {
SkDebugf(" operand");
}
if (fOppPtTStart->segment()->isXor()) {
SkDebugf(" xor");
}
SkDebugf("\n");
}
void SkOpCoincidence::dump() const {
SkCoincidentSpans* span = fHead;
while (span) {
span->dump();
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
span = span->next();
}
Enabling clip stack flattening exercises path ops. Iterating through the 903K skps that represent the imagable 1M top web pages triggers a number of bugs, some of which are addressed here. Some web pages trigger intersecting cubic representations of arc with their conic counterparts. This exposed a flaw in coincident detection that caused an infinite loop. The loop alternatively extended the coincident section and, determining the that the bounds of the curve pairs did not overlap, deleted the extension. Track the number of times the coincident detection is called, and if it exceeds an empirically found limit, assume that the curves are coincident and force it to be so. The loop count limit can be determined by enabling DEBUG_T_SECT_LOOP_COUNT and running all tests. The largest count is reported on completion. Another class of bugs was caused by concident detection duplicating nearly identical points that had been merged earlier. To track these bugs, the 'handle coincidence' code was duplicated as a const debug variety that reported if one of a dozen or so irregularities are present; then it is easier to see when a block of code that fixes one irregularity regresses another. Creating the debug const code version exposed some non-debug code that could be const, and some that was experimental and could be removed. Set DEBUG_COINCIDENCE to track coincidence health and handling. For running on Chrome, DEBUG_VERIFY checks the result of pathops against the same operation using SkRegion to verify that the results are nearly the same. When visualizing the pathops work using tools/pathops_visualizer.htm, set DEBUG_DUMP_ALIGNMENT to see the curves after they've been aligned for coincidence. Other bugs fixed include detecting when a section of a pair of curves have devolved into lines and are coincident. TBR=reed@google.com Review URL: https://codereview.chromium.org/1394503003
2015-10-16 16:03:38 +00:00
if (!fTop || fHead == fTop) {
return;
}
SkDebugf("top:\n");
span = fTop;
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
int count = 0;
while (span) {
span->dump();
pathops coincidence and security rewrite Most changes stem from working on an examples bracketed by #if DEBUG_UNDER_DEVELOPMENT // tiger These exposed many problems with coincident curves, as well as errors throughout the code. Fixing these errors also fixed a number of fuzzer-inspired bug reports. * Line/Curve Intersections Check to see if the end of the line nearly intersects the curve. This was a FIXME in the old code. * Performance Use a central chunk allocator. Plumb the allocator into the global variable state so that it can be shared. (Note that 'SkGlobalState' is allocated on the stack and is visible to children functions but not other threads.) * Refactor Let SkOpAngle grow up from a structure to a class. Let SkCoincidentSpans grow up from a structure to a class. Rename enum Alias to AliasMatch. * Coincidence Rewrite Add more debugging to coincidence detection. Parallel debugging routines have read-only logic to report the current coincidence state so that steps through the logic can expose whether things got better or worse. More functions can error-out and cause the pathops engine to non-destructively exit. * Accuracy Remove code that adjusted point locations. Instead, offset the curve part so that sorted curves all use the same origin. Reduce the size (and influence) of magic numbers. * Testing The debug suite with verify and the full release suite ./out/Debug/pathops_unittest -v -V ./out/Release/pathops_unittest -v -V -x expose one error. That error is captured as cubics_d3. This error exists in the checked in code as well. BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 BUG=skia: GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003 Review-Url: https://codereview.chromium.org/2128633003
2016-07-18 17:01:36 +00:00
span = span->next();
SkCoincidentSpans* check = fTop;
++count;
for (int index = 0; index < count; ++index) {
if (span == check) {
SkDebugf("(loops to #%d)\n", index);
return;
}
check = check->next();
}
}
}
void SkOpContour::dump() const {
SkDebugf("contour=%d count=%d op=%d xor=%d\n", this->debugID(), fCount, fOperand, fXor);
if (!fCount) {
return;
}
const SkOpSegment* segment = &fHead;
SkDEBUGCODE(fDebugIndent = 0);
this->indentDump();
do {
segment->dump();
} while ((segment = segment->next()));
this->outdentDump();
}
void SkOpContour::dumpAll() const {
SkDebugf("contour=%d count=%d op=%d xor=%d\n", this->debugID(), fCount, fOperand, fXor);
if (!fCount) {
return;
}
const SkOpSegment* segment = &fHead;
SkDEBUGCODE(fDebugIndent = 0);
this->indentDump();
do {
segment->dumpAll();
} while ((segment = segment->next()));
this->outdentDump();
}
void SkOpContour::dumpAngles() const {
SkDebugf("contour=%d\n", this->debugID());
const SkOpSegment* segment = &fHead;
do {
SkDebugf(" seg=%d ", segment->debugID());
segment->dumpAngles();
} while ((segment = segment->next()));
}
void SkOpContour::dumpPt(int index) const {
const SkOpSegment* segment = &fHead;
do {
if (segment->debugID() == index) {
segment->dumpPts();
}
} while ((segment = segment->next()));
}
Enabling clip stack flattening exercises path ops. Iterating through the 903K skps that represent the imagable 1M top web pages triggers a number of bugs, some of which are addressed here. Some web pages trigger intersecting cubic representations of arc with their conic counterparts. This exposed a flaw in coincident detection that caused an infinite loop. The loop alternatively extended the coincident section and, determining the that the bounds of the curve pairs did not overlap, deleted the extension. Track the number of times the coincident detection is called, and if it exceeds an empirically found limit, assume that the curves are coincident and force it to be so. The loop count limit can be determined by enabling DEBUG_T_SECT_LOOP_COUNT and running all tests. The largest count is reported on completion. Another class of bugs was caused by concident detection duplicating nearly identical points that had been merged earlier. To track these bugs, the 'handle coincidence' code was duplicated as a const debug variety that reported if one of a dozen or so irregularities are present; then it is easier to see when a block of code that fixes one irregularity regresses another. Creating the debug const code version exposed some non-debug code that could be const, and some that was experimental and could be removed. Set DEBUG_COINCIDENCE to track coincidence health and handling. For running on Chrome, DEBUG_VERIFY checks the result of pathops against the same operation using SkRegion to verify that the results are nearly the same. When visualizing the pathops work using tools/pathops_visualizer.htm, set DEBUG_DUMP_ALIGNMENT to see the curves after they've been aligned for coincidence. Other bugs fixed include detecting when a section of a pair of curves have devolved into lines and are coincident. TBR=reed@google.com Review URL: https://codereview.chromium.org/1394503003
2015-10-16 16:03:38 +00:00
void SkOpContour::dumpPts(const char* prefix) const {
SkDebugf("contour=%d\n", this->debugID());
const SkOpSegment* segment = &fHead;
do {
Enabling clip stack flattening exercises path ops. Iterating through the 903K skps that represent the imagable 1M top web pages triggers a number of bugs, some of which are addressed here. Some web pages trigger intersecting cubic representations of arc with their conic counterparts. This exposed a flaw in coincident detection that caused an infinite loop. The loop alternatively extended the coincident section and, determining the that the bounds of the curve pairs did not overlap, deleted the extension. Track the number of times the coincident detection is called, and if it exceeds an empirically found limit, assume that the curves are coincident and force it to be so. The loop count limit can be determined by enabling DEBUG_T_SECT_LOOP_COUNT and running all tests. The largest count is reported on completion. Another class of bugs was caused by concident detection duplicating nearly identical points that had been merged earlier. To track these bugs, the 'handle coincidence' code was duplicated as a const debug variety that reported if one of a dozen or so irregularities are present; then it is easier to see when a block of code that fixes one irregularity regresses another. Creating the debug const code version exposed some non-debug code that could be const, and some that was experimental and could be removed. Set DEBUG_COINCIDENCE to track coincidence health and handling. For running on Chrome, DEBUG_VERIFY checks the result of pathops against the same operation using SkRegion to verify that the results are nearly the same. When visualizing the pathops work using tools/pathops_visualizer.htm, set DEBUG_DUMP_ALIGNMENT to see the curves after they've been aligned for coincidence. Other bugs fixed include detecting when a section of a pair of curves have devolved into lines and are coincident. TBR=reed@google.com Review URL: https://codereview.chromium.org/1394503003
2015-10-16 16:03:38 +00:00
SkDebugf(" %s=%d ", prefix, segment->debugID());
segment->dumpPts(prefix);
} while ((segment = segment->next()));
}
Enabling clip stack flattening exercises path ops. Iterating through the 903K skps that represent the imagable 1M top web pages triggers a number of bugs, some of which are addressed here. Some web pages trigger intersecting cubic representations of arc with their conic counterparts. This exposed a flaw in coincident detection that caused an infinite loop. The loop alternatively extended the coincident section and, determining the that the bounds of the curve pairs did not overlap, deleted the extension. Track the number of times the coincident detection is called, and if it exceeds an empirically found limit, assume that the curves are coincident and force it to be so. The loop count limit can be determined by enabling DEBUG_T_SECT_LOOP_COUNT and running all tests. The largest count is reported on completion. Another class of bugs was caused by concident detection duplicating nearly identical points that had been merged earlier. To track these bugs, the 'handle coincidence' code was duplicated as a const debug variety that reported if one of a dozen or so irregularities are present; then it is easier to see when a block of code that fixes one irregularity regresses another. Creating the debug const code version exposed some non-debug code that could be const, and some that was experimental and could be removed. Set DEBUG_COINCIDENCE to track coincidence health and handling. For running on Chrome, DEBUG_VERIFY checks the result of pathops against the same operation using SkRegion to verify that the results are nearly the same. When visualizing the pathops work using tools/pathops_visualizer.htm, set DEBUG_DUMP_ALIGNMENT to see the curves after they've been aligned for coincidence. Other bugs fixed include detecting when a section of a pair of curves have devolved into lines and are coincident. TBR=reed@google.com Review URL: https://codereview.chromium.org/1394503003
2015-10-16 16:03:38 +00:00
void SkOpContour::dumpPtsX(const char* prefix) const {
if (!this->fCount) {
SkDebugf("<empty>\n");
return;
}
const SkOpSegment* segment = &fHead;
do {
Enabling clip stack flattening exercises path ops. Iterating through the 903K skps that represent the imagable 1M top web pages triggers a number of bugs, some of which are addressed here. Some web pages trigger intersecting cubic representations of arc with their conic counterparts. This exposed a flaw in coincident detection that caused an infinite loop. The loop alternatively extended the coincident section and, determining the that the bounds of the curve pairs did not overlap, deleted the extension. Track the number of times the coincident detection is called, and if it exceeds an empirically found limit, assume that the curves are coincident and force it to be so. The loop count limit can be determined by enabling DEBUG_T_SECT_LOOP_COUNT and running all tests. The largest count is reported on completion. Another class of bugs was caused by concident detection duplicating nearly identical points that had been merged earlier. To track these bugs, the 'handle coincidence' code was duplicated as a const debug variety that reported if one of a dozen or so irregularities are present; then it is easier to see when a block of code that fixes one irregularity regresses another. Creating the debug const code version exposed some non-debug code that could be const, and some that was experimental and could be removed. Set DEBUG_COINCIDENCE to track coincidence health and handling. For running on Chrome, DEBUG_VERIFY checks the result of pathops against the same operation using SkRegion to verify that the results are nearly the same. When visualizing the pathops work using tools/pathops_visualizer.htm, set DEBUG_DUMP_ALIGNMENT to see the curves after they've been aligned for coincidence. Other bugs fixed include detecting when a section of a pair of curves have devolved into lines and are coincident. TBR=reed@google.com Review URL: https://codereview.chromium.org/1394503003
2015-10-16 16:03:38 +00:00
segment->dumpPts(prefix);
} while ((segment = segment->next()));
}
void SkOpContour::dumpSegment(int index) const {
debugSegment(index)->dump();
}
Enabling clip stack flattening exercises path ops. Iterating through the 903K skps that represent the imagable 1M top web pages triggers a number of bugs, some of which are addressed here. Some web pages trigger intersecting cubic representations of arc with their conic counterparts. This exposed a flaw in coincident detection that caused an infinite loop. The loop alternatively extended the coincident section and, determining the that the bounds of the curve pairs did not overlap, deleted the extension. Track the number of times the coincident detection is called, and if it exceeds an empirically found limit, assume that the curves are coincident and force it to be so. The loop count limit can be determined by enabling DEBUG_T_SECT_LOOP_COUNT and running all tests. The largest count is reported on completion. Another class of bugs was caused by concident detection duplicating nearly identical points that had been merged earlier. To track these bugs, the 'handle coincidence' code was duplicated as a const debug variety that reported if one of a dozen or so irregularities are present; then it is easier to see when a block of code that fixes one irregularity regresses another. Creating the debug const code version exposed some non-debug code that could be const, and some that was experimental and could be removed. Set DEBUG_COINCIDENCE to track coincidence health and handling. For running on Chrome, DEBUG_VERIFY checks the result of pathops against the same operation using SkRegion to verify that the results are nearly the same. When visualizing the pathops work using tools/pathops_visualizer.htm, set DEBUG_DUMP_ALIGNMENT to see the curves after they've been aligned for coincidence. Other bugs fixed include detecting when a section of a pair of curves have devolved into lines and are coincident. TBR=reed@google.com Review URL: https://codereview.chromium.org/1394503003
2015-10-16 16:03:38 +00:00
void SkOpContour::dumpSegments(const char* prefix, SkPathOp op) const {
bool firstOp = false;
const SkOpContour* c = this;
do {
if (!firstOp && c->operand()) {
#if DEBUG_ACTIVE_OP
SkDebugf("op %s\n", SkPathOpsDebug::kPathOpStr[op]);
#endif
firstOp = true;
}
Enabling clip stack flattening exercises path ops. Iterating through the 903K skps that represent the imagable 1M top web pages triggers a number of bugs, some of which are addressed here. Some web pages trigger intersecting cubic representations of arc with their conic counterparts. This exposed a flaw in coincident detection that caused an infinite loop. The loop alternatively extended the coincident section and, determining the that the bounds of the curve pairs did not overlap, deleted the extension. Track the number of times the coincident detection is called, and if it exceeds an empirically found limit, assume that the curves are coincident and force it to be so. The loop count limit can be determined by enabling DEBUG_T_SECT_LOOP_COUNT and running all tests. The largest count is reported on completion. Another class of bugs was caused by concident detection duplicating nearly identical points that had been merged earlier. To track these bugs, the 'handle coincidence' code was duplicated as a const debug variety that reported if one of a dozen or so irregularities are present; then it is easier to see when a block of code that fixes one irregularity regresses another. Creating the debug const code version exposed some non-debug code that could be const, and some that was experimental and could be removed. Set DEBUG_COINCIDENCE to track coincidence health and handling. For running on Chrome, DEBUG_VERIFY checks the result of pathops against the same operation using SkRegion to verify that the results are nearly the same. When visualizing the pathops work using tools/pathops_visualizer.htm, set DEBUG_DUMP_ALIGNMENT to see the curves after they've been aligned for coincidence. Other bugs fixed include detecting when a section of a pair of curves have devolved into lines and are coincident. TBR=reed@google.com Review URL: https://codereview.chromium.org/1394503003
2015-10-16 16:03:38 +00:00
c->dumpPtsX(prefix);
} while ((c = c->next()));
}
void SkOpContour::dumpSpan(int index) const {
debugSpan(index)->dump();
}
void SkOpContour::dumpSpans() const {
SkDebugf("contour=%d\n", this->debugID());
const SkOpSegment* segment = &fHead;
do {
SkDebugf(" seg=%d ", segment->debugID());
segment->dump();
} while ((segment = segment->next()));
}
void SkOpCurve::dump() const {
int count = SkPathOpsVerbToPoints(SkDEBUGRELEASE(fVerb, SkPath::kCubic_Verb));
SkDebugf("{{");
int index;
for (index = 0; index <= count - 1; ++index) {
SkDebugf("{%1.9gf,%1.9gf}, ", fPts[index].fX, fPts[index].fY);
}
SkDebugf("{%1.9gf,%1.9gf}}}\n", fPts[index].fX, fPts[index].fY);
}
#ifdef SK_DEBUG
const SkOpAngle* SkOpGlobalState::debugAngle(int id) const {
const SkOpContour* contour = fContourHead;
do {
const SkOpSegment* segment = contour->first();
while (segment) {
const SkOpSpan* span = segment->head();
do {
SkOpAngle* angle = span->fromAngle();
if (angle && angle->debugID() == id) {
return angle;
}
angle = span->toAngle();
if (angle && angle->debugID() == id) {
return angle;
}
} while ((span = span->next()->upCastable()));
const SkOpSpanBase* tail = segment->tail();
SkOpAngle* angle = tail->fromAngle();
if (angle && angle->debugID() == id) {
return angle;
}
segment = segment->next();
}
} while ((contour = contour->next()));
return nullptr;
}
SkOpContour* SkOpGlobalState::debugContour(int id) const {
SkOpContour* contour = fContourHead;
do {
if (contour->debugID() == id) {
return contour;
}
} while ((contour = contour->next()));
return nullptr;
}
const SkOpPtT* SkOpGlobalState::debugPtT(int id) const {
const SkOpContour* contour = fContourHead;
do {
const SkOpSegment* segment = contour->first();
while (segment) {
const SkOpSpan* span = segment->head();
do {
const SkOpPtT* ptT = span->ptT();
if (ptT->debugMatchID(id)) {
return ptT;
}
} while ((span = span->next()->upCastable()));
const SkOpSpanBase* tail = segment->tail();
const SkOpPtT* ptT = tail->ptT();
if (ptT->debugMatchID(id)) {
return ptT;
}
segment = segment->next();
}
} while ((contour = contour->next()));
return nullptr;
}
const SkOpSegment* SkOpGlobalState::debugSegment(int id) const {
const SkOpContour* contour = fContourHead;
do {
const SkOpSegment* segment = contour->first();
while (segment) {
if (segment->debugID() == id) {
return segment;
}
segment = segment->next();
}
} while ((contour = contour->next()));
return nullptr;
}
const SkOpSpanBase* SkOpGlobalState::debugSpan(int id) const {
const SkOpContour* contour = fContourHead;
do {
const SkOpSegment* segment = contour->first();
while (segment) {
const SkOpSpan* span = segment->head();
do {
if (span->debugID() == id) {
return span;
}
} while ((span = span->next()->upCastable()));
const SkOpSpanBase* tail = segment->tail();
if (tail->debugID() == id) {
return tail;
}
segment = segment->next();
}
} while ((contour = contour->next()));
return nullptr;
}
#endif
#if DEBUG_T_SECT_DUMP > 1
int gDumpTSectNum;
#endif
// global path dumps for msvs Visual Studio 17 to use from Immediate Window
namespace SkOpDebug {
void Dump(const SkOpContour& contour) {
contour.dump();
}
void DumpAll(const SkOpContour& contour) {
contour.dumpAll();
}
void DumpAngles(const SkOpContour& contour) {
contour.dumpAngles();
}
void DumpContours(const SkOpContour& contour) {
contour.dumpContours();
}
void DumpContoursAll(const SkOpContour& contour) {
contour.dumpContoursAll();
}
void DumpContoursAngles(const SkOpContour& contour) {
contour.dumpContoursAngles();
}
void DumpContoursPts(const SkOpContour& contour) {
contour.dumpContoursPts();
}
void DumpContoursPt(const SkOpContour& contour, int segmentID) {
contour.dumpContoursPt(segmentID);
}
void DumpContoursSegment(const SkOpContour& contour, int segmentID) {
contour.dumpContoursSegment(segmentID);
}
void DumpContoursSpan(const SkOpContour& contour, int segmentID) {
contour.dumpContoursSpan(segmentID);
}
void DumpContoursSpans(const SkOpContour& contour) {
contour.dumpContoursSpans();
}
void DumpPt(const SkOpContour& contour, int pt) {
contour.dumpPt(pt);
}
void DumpPts(const SkOpContour& contour, const char* prefix) {
contour.dumpPts(prefix);
}
void DumpSegment(const SkOpContour& contour, int seg) {
contour.dumpSegment(seg);
}
void DumpSegments(const SkOpContour& contour, const char* prefix, SkPathOp op) {
contour.dumpSegments(prefix, op);
}
void DumpSpan(const SkOpContour& contour, int span) {
contour.dumpSpan(span);
}
void DumpSpans(const SkOpContour& contour ) {
contour.dumpSpans();
}
void Dump(const SkOpSegment& segment) {
segment.dump();
}
void DumpAll(const SkOpSegment& segment) {
segment.dumpAll();
}
void DumpAngles(const SkOpSegment& segment) {
segment.dumpAngles();
}
void DumpCoin(const SkOpSegment& segment) {
segment.dumpCoin();
}
void DumpPts(const SkOpSegment& segment, const char* prefix) {
segment.dumpPts(prefix);
}
void Dump(const SkOpPtT& ptT) {
ptT.dump();
}
void DumpAll(const SkOpPtT& ptT) {
ptT.dumpAll();
}
void Dump(const SkOpSpanBase& spanBase) {
spanBase.dump();
}
void DumpCoin(const SkOpSpanBase& spanBase) {
spanBase.dumpCoin();
}
void DumpAll(const SkOpSpanBase& spanBase) {
spanBase.dumpAll();
}
void DumpCoin(const SkOpSpan& span) {
span.dumpCoin();
}
bool DumpSpan(const SkOpSpan& span) {
return span.dumpSpan();
}
void Dump(const SkDConic& conic) {
conic.dump();
}
void DumpID(const SkDConic& conic, int id) {
conic.dumpID(id);
}
void Dump(const SkDCubic& cubic) {
cubic.dump();
}
void DumpID(const SkDCubic& cubic, int id) {
cubic.dumpID(id);
}
void Dump(const SkDLine& line) {
line.dump();
}
void DumpID(const SkDLine& line, int id) {
line.dumpID(id);
}
void Dump(const SkDQuad& quad) {
quad.dump();
}
void DumpID(const SkDQuad& quad, int id) {
quad.dumpID(id);
}
void Dump(const SkDPoint& point) {
point.dump();
}
void Dump(const SkOpAngle& angle) {
angle.dump();
}
// dummy definitions to fool msvs Visual Studio 2018 Immediate Window
#define DummyDefinitions(a, b) \
\
void Dump(const SkDebugTCoincident##a##b& curve) { \
((const SkTCoincident<SkD##a, SkD##b>& ) curve).dump(); \
} \
\
void Dump(const SkDebugTSect##a##b& curve) { \
((const SkTSect<SkD##a, SkD##b>& ) curve).dump(); \
} \
\
void DumpBoth(const SkDebugTSect##a##b& curve, SkDebugTSect##a##b* opp) { \
((const SkTSect<SkD##a, SkD##b>& ) curve).dumpBoth((SkTSect<SkD##b, SkD##a>* ) opp); \
} \
\
void DumpBounded(const SkDebugTSect##a##b& curve, int id) { \
((const SkTSect<SkD##a, SkD##b>& ) curve).dumpBounded(id); \
} \
\
void DumpBounds(const SkDebugTSect##a##b& curve) { \
((const SkTSect<SkD##a, SkD##b>& ) curve).dumpBounds(); \
} \
\
void DumpCoin(const SkDebugTSect##a##b& curve) { \
((const SkTSect<SkD##a, SkD##b>& ) curve).dumpCoin(); \
} \
\
void DumpCoinCurves(const SkDebugTSect##a##b& curve) { \
((const SkTSect<SkD##a, SkD##b>& ) curve).dumpCoinCurves(); \
} \
\
void DumpCurves(const SkDebugTSect##a##b& curve) { \
((const SkTSect<SkD##a, SkD##b>& ) curve).dumpCurves(); \
} \
\
void Dump(const SkDebugTSpan##a##b& curve) { \
((const SkTSpan<SkD##a, SkD##b>& ) curve).dump(); \
} \
\
void DumpAll(const SkDebugTSpan##a##b& curve) { \
((const SkTSpan<SkD##a, SkD##b>& ) curve).dumpAll(); \
} \
\
void DumpBounded(const SkDebugTSpan##a##b& curve, int id) { \
((const SkTSpan<SkD##a, SkD##b>& ) curve).dumpBounded(id); \
} \
\
void DumpBounds(const SkDebugTSpan##a##b& curve) { \
((const SkTSpan<SkD##a, SkD##b>& ) curve).dumpBounds(); \
} \
\
void DumpCoin(const SkDebugTSpan##a##b& curve) { \
((const SkTSpan<SkD##a, SkD##b>& ) curve).dumpCoin(); \
}
DummyDefinitions(Quad, Quad);
DummyDefinitions(Conic, Quad);
DummyDefinitions(Conic, Conic);
DummyDefinitions(Cubic, Quad);
DummyDefinitions(Cubic, Conic);
DummyDefinitions(Cubic, Cubic);
#undef DummyDefinitions
}