skia2/tools/bench_pictures_main.cpp

450 lines
14 KiB
C++
Raw Normal View History

/*
* Copyright 2012 Google Inc.
*
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "BenchTimer.h"
#include "CopyTilesRenderer.h"
#include "PictureBenchmark.h"
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
#include "PictureRenderingFlags.h"
#include "SkBenchLogger.h"
#include "SkCommandLineFlags.h"
#include "SkGraphics.h"
#include "SkImageDecoder.h"
#if LAZY_CACHE_STATS
#include "SkLazyPixelRef.h"
#endif
#include "SkLruImageCache.h"
#include "SkMath.h"
#include "SkOSFile.h"
#include "SkPicture.h"
#include "SkStream.h"
#include "picture_utils.h"
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
SkBenchLogger gLogger;
// Flags used by this file, in alphabetical order.
DEFINE_bool(countRAM, false, "Count the RAM used for bitmap pixels in each skp file");
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
DECLARE_bool(deferImageDecoding);
DEFINE_string(filter, "",
"type:flag : Enable canvas filtering to disable a paint flag, "
"use no blur or low quality blur, or use no hinting or "
"slight hinting. For all flags except AAClip, specify the "
"type of primitive to effect, or choose all. for AAClip "
"alone, the filter affects all clips independent of type. "
"Specific flags are listed above.");
DEFINE_string(logFile, "", "Destination for writing log output, in addition to stdout.");
DEFINE_bool(logPerIter, false, "Log each repeat timer instead of mean.");
DEFINE_bool(min, false, "Print the minimum times (instead of average).");
DECLARE_int32(multi);
DECLARE_string(readPath);
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
DEFINE_int32(repeat, 1, "Set the number of times to repeat each test.");
DEFINE_bool(timeIndividualTiles, false, "Report times for drawing individual tiles, rather than "
"times for drawing the whole page. Requires tiled rendering.");
DEFINE_string(timers, "", "[wcgWC]*: Display wall, cpu, gpu, truncated wall or truncated cpu time"
" for each picture.");
DEFINE_bool(trackDeferredCaching, false, "Only meaningful with --deferImageDecoding and "
"LAZY_CACHE_STATS set to true. Report percentage of cache hits when using deferred "
"image decoding.");
static char const * const gFilterTypes[] = {
"paint",
"point",
"line",
"bitmap",
"rect",
"oval",
"path",
"text",
"all",
};
static const size_t kFilterTypesCount = sizeof(gFilterTypes) / sizeof(gFilterTypes[0]);
static char const * const gFilterFlags[] = {
"antiAlias",
"filterBitmap",
"dither",
"underlineText",
"strikeThruText",
"fakeBoldText",
"linearText",
"subpixelText",
"devKernText",
"LCDRenderText",
"embeddedBitmapText",
"autoHinting",
"verticalText",
"genA8FromLCD",
"blur",
"hinting",
"slightHinting",
"AAClip",
};
static const size_t kFilterFlagsCount = sizeof(gFilterFlags) / sizeof(gFilterFlags[0]);
static SkString filtersName(sk_tools::PictureRenderer::DrawFilterFlags* drawFilters) {
int all = drawFilters[0];
size_t tIndex;
for (tIndex = 1; tIndex < SkDrawFilter::kTypeCount; ++tIndex) {
all &= drawFilters[tIndex];
}
SkString result;
for (size_t fIndex = 0; fIndex < kFilterFlagsCount; ++fIndex) {
SkString types;
if (all & (1 << fIndex)) {
types = gFilterTypes[SkDrawFilter::kTypeCount];
} else {
for (tIndex = 0; tIndex < SkDrawFilter::kTypeCount; ++tIndex) {
if (drawFilters[tIndex] & (1 << fIndex)) {
types += gFilterTypes[tIndex];
}
}
}
if (!types.size()) {
continue;
}
result += "_";
result += types;
result += ".";
result += gFilterFlags[fIndex];
}
return result;
}
static SkString filterTypesUsage() {
SkString result;
for (size_t index = 0; index < kFilterTypesCount; ++index) {
result += gFilterTypes[index];
if (index < kFilterTypesCount - 1) {
result += " | ";
}
}
return result;
}
static SkString filterFlagsUsage() {
SkString result;
size_t len = 0;
for (size_t index = 0; index < kFilterFlagsCount; ++index) {
result += gFilterFlags[index];
if (result.size() - len >= 72) {
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
result += "\n\t\t";
len = result.size();
}
if (index < kFilterFlagsCount - 1) {
result += " | ";
}
}
return result;
}
// These are defined in PictureRenderingFlags.cpp
extern SkLruImageCache gLruImageCache;
extern bool lazy_decode_bitmap(const void* buffer, size_t size, SkBitmap* bitmap);
#if LAZY_CACHE_STATS
static int32_t gTotalCacheHits;
static int32_t gTotalCacheMisses;
#endif
static bool run_single_benchmark(const SkString& inputPath,
sk_tools::PictureBenchmark& benchmark) {
SkFILEStream inputStream;
inputStream.setPath(inputPath.c_str());
if (!inputStream.isValid()) {
SkString err;
err.printf("Could not open file %s\n", inputPath.c_str());
gLogger.logError(err);
return false;
}
// Since the old picture has been deleted, all pixels should be cleared.
SkASSERT(gLruImageCache.getImageCacheUsed() == 0);
if (FLAGS_countRAM) {
// Set the limit to zero, so all pixels will be kept
gLruImageCache.setImageCacheLimit(0);
}
bool success = false;
SkPicture* picture;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (FLAGS_deferImageDecoding) {
picture = SkNEW_ARGS(SkPicture, (&inputStream, &success, &lazy_decode_bitmap));
} else {
picture = SkNEW_ARGS(SkPicture, (&inputStream, &success, &SkImageDecoder::DecodeMemory));
}
SkAutoTDelete<SkPicture> ad(picture);
if (!success) {
SkString err;
err.printf("Could not read an SkPicture from %s\n", inputPath.c_str());
gLogger.logError(err);
return false;
}
SkString filename;
sk_tools::get_basename(&filename, inputPath);
SkString result;
result.printf("running bench [%i %i] %s ", picture->width(), picture->height(),
filename.c_str());
gLogger.logProgress(result);
benchmark.run(picture);
#if LAZY_CACHE_STATS
if (FLAGS_trackDeferredCaching) {
int32_t cacheHits = SkLazyPixelRef::GetCacheHits();
int32_t cacheMisses = SkLazyPixelRef::GetCacheMisses();
SkLazyPixelRef::ResetCacheStats();
SkString hitString;
hitString.printf("Cache hit rate: %f\n", (double) cacheHits / (cacheHits + cacheMisses));
gLogger.logProgress(hitString);
gTotalCacheHits += cacheHits;
gTotalCacheMisses += cacheMisses;
}
#endif
if (FLAGS_countRAM) {
SkString ramCount("RAM used for bitmaps: ");
size_t bytes = gLruImageCache.getImageCacheUsed();
if (bytes > 1024) {
size_t kb = bytes / 1024;
if (kb > 1024) {
size_t mb = kb / 1024;
ramCount.appendf("%zi MB\n", mb);
} else {
ramCount.appendf("%zi KB\n", kb);
}
} else {
ramCount.appendf("%zi bytes\n", bytes);
}
gLogger.logProgress(ramCount);
}
return true;
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
static void setup_benchmark(sk_tools::PictureBenchmark* benchmark) {
sk_tools::PictureRenderer::DrawFilterFlags drawFilters[SkDrawFilter::kTypeCount];
sk_bzero(drawFilters, sizeof(drawFilters));
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (FLAGS_filter.count() > 0) {
const char* filters = FLAGS_filter[0];
const char* colon = strchr(filters, ':');
if (colon) {
int32_t type = -1;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
size_t typeLen = colon - filters;
for (size_t tIndex = 0; tIndex < kFilterTypesCount; ++tIndex) {
if (typeLen == strlen(gFilterTypes[tIndex])
&& !strncmp(filters, gFilterTypes[tIndex], typeLen)) {
type = SkToS32(tIndex);
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
break;
}
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (type < 0) {
SkString err;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
err.printf("Unknown type for --filter %s\n", filters);
gLogger.logError(err);
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
exit(-1);
}
int flag = -1;
size_t flagLen = strlen(filters) - typeLen - 1;
for (size_t fIndex = 0; fIndex < kFilterFlagsCount; ++fIndex) {
if (flagLen == strlen(gFilterFlags[fIndex])
&& !strncmp(colon + 1, gFilterFlags[fIndex], flagLen)) {
flag = 1 << fIndex;
break;
}
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (flag < 0) {
SkString err;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
err.printf("Unknown flag for --filter %s\n", filters);
gLogger.logError(err);
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
exit(-1);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
for (int index = 0; index < SkDrawFilter::kTypeCount; ++index) {
if (type != SkDrawFilter::kTypeCount && index != type) {
continue;
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
drawFilters[index] = (sk_tools::PictureRenderer::DrawFilterFlags)
(drawFilters[index] | flag);
}
} else {
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
SkString err;
err.printf("Unknown arg for --filter %s : missing colon\n", filters);
gLogger.logError(err);
exit(-1);
}
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (FLAGS_timers.count() > 0) {
size_t index = 0;
bool timerWall = false;
bool truncatedTimerWall = false;
bool timerCpu = false;
bool truncatedTimerCpu = false;
bool timerGpu = false;
while (index < strlen(FLAGS_timers[0])) {
switch (FLAGS_timers[0][index]) {
case 'w':
timerWall = true;
break;
case 'c':
timerCpu = true;
break;
case 'W':
truncatedTimerWall = true;
break;
case 'C':
truncatedTimerCpu = true;
break;
case 'g':
timerGpu = true;
break;
default:
SkDebugf("mystery character\n");
break;
}
index++;
}
benchmark->setTimersToShow(timerWall, truncatedTimerWall, timerCpu, truncatedTimerCpu,
timerGpu);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
SkString errorString;
SkAutoTUnref<sk_tools::PictureRenderer> renderer(parseRenderer(errorString,
kBench_PictureTool));
if (errorString.size() > 0) {
gLogger.logError(errorString);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (NULL == renderer.get()) {
exit(-1);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (FLAGS_timeIndividualTiles) {
if (FLAGS_multi > 1) {
gLogger.logError("Cannot time individual tiles with more than one thread.\n");
exit(-1);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
sk_tools::TiledPictureRenderer* tiledRenderer = renderer->getTiledRenderer();
if (NULL == tiledRenderer) {
gLogger.logError("--timeIndividualTiles requires tiled rendering.\n");
exit(-1);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (!tiledRenderer->supportsTimingIndividualTiles()) {
gLogger.logError("This renderer does not support --timeIndividualTiles.\n");
exit(-1);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
benchmark->setTimeIndividualTiles(true);
}
if (FLAGS_readPath.count() < 1) {
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
gLogger.logError(".skp files or directories are required.\n");
exit(-1);
}
renderer->setDrawFilters(drawFilters, filtersName(drawFilters));
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
benchmark->setPrintMin(FLAGS_min);
benchmark->setLogPerIter(FLAGS_logPerIter);
benchmark->setRenderer(renderer);
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
benchmark->setRepeats(FLAGS_repeat);
benchmark->setLogger(&gLogger);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
static int process_input(const char* input,
sk_tools::PictureBenchmark& benchmark) {
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
SkString inputAsSkString(input);
SkOSFile::Iter iter(input, "skp");
SkString inputFilename;
int failures = 0;
if (iter.next(&inputFilename)) {
do {
SkString inputPath;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
sk_tools::make_filepath(&inputPath, inputAsSkString, inputFilename);
if (!run_single_benchmark(inputPath, benchmark)) {
++failures;
}
} while(iter.next(&inputFilename));
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
} else if (SkStrEndsWith(input, ".skp")) {
if (!run_single_benchmark(inputAsSkString, benchmark)) {
++failures;
}
} else {
SkString warning;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
warning.printf("Warning: skipping %s\n", input);
gLogger.logError(warning);
}
return failures;
}
int tool_main(int argc, char** argv);
int tool_main(int argc, char** argv) {
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
SkString usage;
usage.printf("Time drawing .skp files.\n"
"\tPossible arguments for --filter: [%s]\n\t\t[%s]",
filterTypesUsage().c_str(), filterFlagsUsage().c_str());
SkCommandLineFlags::SetUsage(usage.c_str());
SkCommandLineFlags::Parse(argc, argv);
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
if (FLAGS_repeat < 1) {
SkString error;
error.printf("--repeats must be >= 1. Was %i\n", FLAGS_repeat);
gLogger.logError(error);
exit(-1);
}
if (FLAGS_logFile.count() == 1) {
if (!gLogger.SetLogFile(FLAGS_logFile[0])) {
SkString str;
str.printf("Could not open %s for writing.\n", FLAGS_logFile[0]);
gLogger.logError(str);
// TODO(borenet): We're disabling this for now, due to
// write-protected Android devices. The very short-term
// solution is to ignore the fact that we have no log file.
//exit(-1);
}
}
#if SK_ENABLE_INST_COUNT
gPrintInstCount = true;
#endif
SkAutoGraphics ag;
sk_tools::PictureBenchmark benchmark;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 16:41:06 +00:00
setup_benchmark(&benchmark);
int failures = 0;
for (int i = 0; i < FLAGS_readPath.count(); ++i) {
failures += process_input(FLAGS_readPath[i], benchmark);
}
if (failures != 0) {
SkString err;
err.printf("Failed to run %i benchmarks.\n", failures);
gLogger.logError(err);
return 1;
}
#if LAZY_CACHE_STATS
if (FLAGS_trackDeferredCaching) {
SkDebugf("Total cache hit rate: %f\n",
(double) gTotalCacheHits / (gTotalCacheHits + gTotalCacheMisses));
}
#endif
return 0;
}
#if !defined SK_BUILD_FOR_IOS
int main(int argc, char * const argv[]) {
return tool_main(argc, (char**) argv);
}
#endif