Propagating usage of these helpers will, hopefully, improve code reuse and centralize future changes.
This is pulled out of https://skia-review.googlesource.com/c/skia/+/252161/ (Add GrPrimitiveType to GrProgramInfo)
Bug: skia:9455
Change-Id: I9b46e42db8561d98fb724a41a1f7a3bec4bf97b0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/252484
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This reverts commit 63a3873957.
Reason for revert: fail
Original change's description:
> Reduce inputs to GrProgramDesc::Build method(s)
>
> This moves the computation of the GrStencilSettings into GrProgramDesc::Build for the Vulkan backend
>
> This makes it clear that the stencilSettings are determined by the GrProgramInfo.
>
> Note that this does change some behavior in that the number of stencil bits is now determined (and set up for) the number requested not the number actually available on the attached stencil buffer at flush time.
>
> Bug: skia:9455
> Change-Id: Ia5fa4e30e34952c1a492b8d571094abf2291b2a4
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/248696
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Robert Phillips <robertphillips@google.com>
TBR=egdaniel@google.com,robertphillips@google.com
Change-Id: Ib0b337c19acea8000b5592f3dfeda181fd6ef157
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:9455
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/249222
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This moves the computation of the GrStencilSettings into GrProgramDesc::Build for the Vulkan backend
This makes it clear that the stencilSettings are determined by the GrProgramInfo.
Note that this does change some behavior in that the number of stencil bits is now determined (and set up for) the number requested not the number actually available on the attached stencil buffer at flush time.
Bug: skia:9455
Change-Id: Ia5fa4e30e34952c1a492b8d571094abf2291b2a4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/248696
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This improves the encapsulation of the GrProgramInfo class.
Bug: skia:9455
Change-Id: Ic241ba4a2c2edea3e774522065371e5ed8cc2da3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/247438
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
This is the first step in moving the marshaling of program information earlier in renderTask processing (i.e., to onPrePrepare).
Change-Id: I91e3baed9a128e845bd32f9dbbacd9b21d852a3d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/244118
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Give it its own header file.
Make it store SkISize rather than separate int w/h.
Change-Id: I732f2774c561decac743a950959a70cbc162b67b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245163
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Need for a follow on change, we need all ops to do all their prep work
which includes creating needed buffers before we start calling
execute on ops. This change updates the few ops that were creating their
buffers in onExecute.
Change-Id: I0f43b0cc35359e1e7ccfb3b159e79bdfe288dcb1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/239436
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Also don't specify redundant width/height to SkGpuDevice.
Change-Id: I389df5c4b073c2c05632ba6b7c95b02a22dfaf98
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235824
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
config is completely redundant. No caller really cares what the backend
format is.
Change-Id: I93f1feb3ee61db6c21b7915bab3ee3fba5656f92
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/225194
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
We deduce whether to premul or unpremul based on the the input/output
alpha types. This means we also now support unpremuling on write and
premuling on read.
Class-ify former struct GrPixelInfo. Remove origin and instead pass a
flip bool to GrConvertPixels.
Unifies read/write methods on GrSurfaceContext via automatic conversion
of SkImageInfo to GrPixelInfo and making GrDirectContext an optional
parameter.
Bug: skia:7580
Change-Id: I42f6997852b4b902fb81264c6de68ca9537606aa
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/224281
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This is largely redundant with GrPixelConfig. However, we intend to
remove GrPixelConfig.
Bug: skia:7580
Change-Id: I03d92303be832711f7821f8a97d36387c9b04a9f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/222883
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
From now on, sample counts always refer to the number of actual color
samples, and render targets don't have separate color and stencil
sample counts.
If mixed samples support is available when making a
"GrAAType::kCoverage" draw, then an op may attach and use a mixed
sampled stencil buffer internally. But this will all be invisible to
the client.
After this CL, we temporarily won't have a mode to use nvpr with mixed
samples. That will soon be fixed by a follow-on CL that enables nvpr
with mixed samples in the normal "gl" and "gles" configs.
Bug: skia:
Change-Id: I1cb8277f0d2d0d371f24bb9f39cd473ed5c5c83b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/221878
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Current strategy: everything from the top
Things to look at first are the manual changes:
- added tools/rewrite_includes.py
- removed -Idirectives from BUILD.gn
- various compile.sh simplifications
- tweak tools/embed_resources.py
- update gn/find_headers.py to write paths from the top
- update gn/gn_to_bp.py SkUserConfig.h layout
so that #include "include/config/SkUserConfig.h" always
gets the header we want.
No-Presubmit: true
Change-Id: I73a4b181654e0e38d229bc456c0d0854bae3363e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/209706
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Hal Canary <halcanary@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Previously, we relied on ops to deduce whether a draw would have
hardware coverage modulation as a result mixed samples. This is
problematic because *any* draw can have mixed samples coverage if
there is a multisampled stencil clip. No ops were checking for stencil
clip, and most just said they never used mixed samples.
Now that the only usecase for mixed samples is the stencil buffer,
this CL makes the processorSet automatically deduce mixed samples
coverage from the stencil settings and fsaaType.
Bug: skia:
Change-Id: Ib69b84bc03b12f6efb8e7d6ed721ae1612785315
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/197281
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
SkCanvas::flush is problematic and we wish to deprecate it. As a first step, this CL begins to remove Skia's internal usage of it.
Ideally clients would use SkSurface::flush and/or GrContext::flush.
Change-Id: I39bb0702f8230134a97961a4ee70833fd5bd0dcc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/196641
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
GrBuffer is a base class for GrGpuBuffer and GrCpuBuffer. GrGpuBuffer is a
GrGpuResource and the others are not. This allows GrCpuBuffers to exist
outside of the GrGpuResourceCache.
Also removes flags from GrResourceProvider buffer factory function. The
only flag still in use was kRequireGpuMemory. Now CPU buffers are made
without using GrResourceProvider.
Change-Id: I82670d1316e28fd6331ca36b26c8c4ead33846f9
Reviewed-on: https://skia-review.googlesource.com/c/188823
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Renamed to GrGpuBufferType in anticipation of splitting GrBuffer
into GrGpuBuffer and GrCpuBuffer types.
There were two unused values in the enum that are removed, DrawIndirect
and Texel.
Change-Id: Icb6b3da689adbd8e10495c10fd0470a6ee0120b5
Reviewed-on: https://skia-review.googlesource.com/c/189280
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Mechanical. This makes the priv() accessor the same for all the context types.
Change-Id: I40850eb05a33b8d7cc3eabdd42226d24b2ba58aa
Reviewed-on: https://skia-review.googlesource.com/c/189164
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Now that we're keeping refs on GrBuffers during flush, we shouldn't
need to specify this flag.
Change-Id: Idbe08e84d23690d6c9e94f23f2c4507a2e965aff
Reviewed-on: https://skia-review.googlesource.com/c/188635
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
GrRenderTargetOpList maintains an array of op chains. When it receives a
new op it tries to add it to an existing chain, working backwards from
the end of the current array. If the op can be added to a chain it
additionally tries to merge the new op with ops already in the chain
before adding it to the tail of the chain.
In forward combining it tries to concatenate chains. If chains can
concatenate it also attempts to merge ops between the two chains.
Now op chaining results reported by Op subclasses must be transitive.
Moreover, if op A is able to merge with B then it must be the case that
any op that can chain with A will either merge or chain with any op that
can chain to B.
Bug: skia:8491
Change-Id: Ib6a2a669acd4257134a37d271289b8b3f247cd3f
Reviewed-on: https://skia-review.googlesource.com/c/170351
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Adds setVertexAttributes and setInstanceAttributes. These take a pointer
to the first attribute, and a count. The count is the total number of
possible attributes, though some may not be initialized. The base class
computes the number of initialized attributes, pre-computes the strides,
and only allows subsequent access to the initialized attributes.
The attributes need to be allocated contiguously. Some GPs place them in
an array, though most just place them as consecutive members, and pass
a pointer to the first one.
Indexed access would be possible, but now it makes more sense to iterate
over all attributes, so enable that, and use range-based for everywhere.
Completely remove the per-attribute offset helper (again - possible, but
not real helpful), and make the stride always available. In many ops,
just use the GP's computed stride, rather than re-computing it.
Bug: skia:
Change-Id: Ie4cccb7969a98ee5a10b373e714fbd702e875b3e
Reviewed-on: https://skia-review.googlesource.com/c/169241
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 51b1c12bbc.
Reason for revert: reverting till flutter gets to 1.1 to fix build issues.
Original change's description:
> Have a GrBackendFormat be stored on gpu proxies.
>
> Bug: skia:
> Change-Id: Iaf1fb24ab29a61d44e5fa59a5e0867ed02dcda90
> Reviewed-on: https://skia-review.googlesource.com/c/168021
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Greg Daniel <egdaniel@google.com>
TBR=egdaniel@google.com,bsalomon@google.com,brianosman@google.com
Change-Id: I574fdc084ef5994596c51fb0d60423b5dc01b885
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:903701 chromium:903756
Reviewed-on: https://skia-review.googlesource.com/c/169835
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Bug: skia:
Change-Id: Iaf1fb24ab29a61d44e5fa59a5e0867ed02dcda90
Reviewed-on: https://skia-review.googlesource.com/c/168021
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Bug: skia:
Change-Id: I5386e27edbcf39233880d869841a6632ecb9416c
Reviewed-on: https://skia-review.googlesource.com/c/168261
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Converts GrResourceProvider::Flags and GrResourceCache::ScratchFlags
to "enum class" and fixes a case where we were accidentally using the
wrong type of flag. Makes sure to allocate GrSWMaskHelper proxies with
kNoPendingIO.
Bug: skia:8351
Change-Id: Ibcaa26314a53d0cb31ae22915ab94ab0fc07e76d
Reviewed-on: https://skia-review.googlesource.com/157280
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
The CPU type is still specified using GrVertexAttribType.
The GPU type is specified directly using GrSLType.
kHalfX_GrVertexAttribType now really means half-float buffer
data, rather than float. (Caveat: The GL enum is only correct
with ES3/GL3 - ES2+extension needs a different value. Sigh.)
Bug: skia:
Change-Id: Ife101db68a5d4ea1ddc2f6c60fbec0c66d725c16
Reviewed-on: https://skia-review.googlesource.com/154628
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit fdf05f4ff4.
Reason for revert: Android fixed after removing multitexture support from TextureOp.
Original change's description:
> Revert "Move GrGeometryProcessor's textures out of classes and into"
>
> This reverts commit af87483873.
>
> Revert "GrGeometryProcessor derives from GrNonAtomicRef not GrProgramElement."
>
> This reverts commit 607be37e3d.
>
> Revert "Store GrMeshDrawOps' meshes in GrOpFlushState's arena."
>
> This reverts commit b948572c78.
>
> Revert "Remove multitexturing support from GrTextureOp."
>
> This reverts commit 986f64c601.
>
> Revert "Make result of GrOp::combineIfPossible be an enum."
>
> This reverts commit 641ac7daa8.
>
> Bug: b/112244393
> Change-Id: I579491a3f2f2f2093f1e2a6141fa1e4cc7b760a4
> Reviewed-on: https://skia-review.googlesource.com/145646
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com
Change-Id: I1d41c2ecf7862e31fb025a7a00bb07bae9d83a47
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: b/112244393
Reviewed-on: https://skia-review.googlesource.com/145780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit af87483873.
Revert "GrGeometryProcessor derives from GrNonAtomicRef not GrProgramElement."
This reverts commit 607be37e3d.
Revert "Store GrMeshDrawOps' meshes in GrOpFlushState's arena."
This reverts commit b948572c78.
Revert "Remove multitexturing support from GrTextureOp."
This reverts commit 986f64c601.
Revert "Make result of GrOp::combineIfPossible be an enum."
This reverts commit 641ac7daa8.
Bug: b/112244393
Change-Id: I579491a3f2f2f2093f1e2a6141fa1e4cc7b760a4
Reviewed-on: https://skia-review.googlesource.com/145646
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This is to prepare for a third value that requests that ops be linked
together so that the first op may do the work for multiple linked ops
without actually merging the GrOp objects.
Change-Id: Ib6e012a89be5edd054aee69d8475bea612331852
Reviewed-on: https://skia-review.googlesource.com/145522
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: Brian Salomon <bsalomon@google.com>
The most common use-case for F16 is to draw things that are explicitly
outside of [0,1]. We can't prevent out-of-range values in general, users
could just draw out-of-range content in src mode. We've decided that
it's best to avoid surprising behavior, and trust the user in these
situations.
This effectively reverts https://skia-review.googlesource.com/c/skia/+/48183
Bug: skia:
Change-Id: I71c2dd925c567e2862d96ab70c752f19245a69c4
Reviewed-on: https://skia-review.googlesource.com/140500
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit a219419c9d.
Reason for revert: breaking things
Original change's description:
> Some scissor state cleanup.
>
> Separate flushing the enablement of scissor from the rect in GrGLGpu.
>
> Move GrPipeline::ScissorState to a global enum and use more broadly.
> Rename to GrScissorTest to avoid name conflict with existing
> GrScissorState.
>
> Change-Id: Ib32160b3300bc12de2d2e1761d152fd1bba8b683
> Reviewed-on: https://skia-review.googlesource.com/137395
> Commit-Queue: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Chris Dalton <csmartdalton@google.com>
TBR=bsalomon@google.com,csmartdalton@google.com
Change-Id: If71a5c5efc86d4239b40675bad2a6cb1f77460f8
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/138900
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Separate flushing the enablement of scissor from the rect in GrGLGpu.
Move GrPipeline::ScissorState to a global enum and use more broadly.
Rename to GrScissorTest to avoid name conflict with existing
GrScissorState.
Change-Id: Ib32160b3300bc12de2d2e1761d152fd1bba8b683
Reviewed-on: https://skia-review.googlesource.com/137395
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Remove scissor rect from GrPipeline.
Draws can specify "fixed dynamic state" which doesn't use the dynamism at
all or can specify dynamic state arrays with an entry per GrMesh.
When we state other than scissor rects this will allow the caller to
use a mix of truly dynamic and fixed dynamic state. So a caller that
only has dynamic scissor rects doesn't need to store its remaining
unvarying state in an array.
Change-Id: I8fcc07eb600c72a26cc712b185755c2116021a8a
Reviewed-on: https://skia-review.googlesource.com/137223
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
We were inconsistent about which order these were in. Having the processor first
will make the parameter order more logical for an upcoming change. Also, the primitive
processor comes logically before the pipeline.
Change-Id: I3968c5e4e6dff01f9c4ad311eb1795b3c7580ff5
Reviewed-on: https://skia-review.googlesource.com/137228
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 19c1233c44.
Reason for revert: want to make sure Google3 can roll
Original change's description:
> Change how vertex/instance attributes are handled in geometry processors.
>
> * No longer register vertex/instance attributes on base class, just counts
>
> * Separate instance and vertex attributes and remove InputRate and offset
>
> * Make attributes constexpr where possible
>
> Change-Id: I1f1d5e772fa177a96d2aeb805aab7b69f35bfae6
> Reviewed-on: https://skia-review.googlesource.com/132405
> Commit-Queue: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Chris Dalton <csmartdalton@google.com>
TBR=egdaniel@google.com,bsalomon@google.com,csmartdalton@google.com
Change-Id: I4800632515e14fbf54af52826928ac915657b59f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/135661
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
* No longer register vertex/instance attributes on base class, just counts
* Separate instance and vertex attributes and remove InputRate and offset
* Make attributes constexpr where possible
Change-Id: I1f1d5e772fa177a96d2aeb805aab7b69f35bfae6
Reviewed-on: https://skia-review.googlesource.com/132405
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Chris Dalton <csmartdalton@google.com>
