SkProxyCanvas is redundant with SkNWayCanvas, and means another class
we have to keep in sync with the SkCanvas interface.
Remove tests which use an SkProxyCanvas.
Requires a change to chromium.
BUG=skia:3279
BUG=skia:500
Review URL: https://codereview.chromium.org/886813002
SkStream is a stateful object, so it does not make sense for it to have
multiple owners. Make SkStream inherit directly from SkNoncopyable.
Update methods which previously called SkStream::ref() (e.g.
SkImageDecoder::buildTileIndex() and SkFrontBufferedStream::Create(),
which required the existing owners to call SkStream::unref()) to take
ownership of their SkStream parameters and delete when done (including
on failure).
Switch all SkAutoTUnref<SkStream>s to SkAutoTDelete<SkStream>s. In some
cases this means heap allocating streams that were previously stack
allocated.
Respect ownership rules of SkTypeface::CreateFromStream() and
SkImageDecoder::buildTileIndex().
Update the comments for exceptional methods which do not affect the
ownership of their SkStream parameters (e.g.
SkPicture::CreateFromStream() and SkTypeface::Deserialize()) to be
explicit about ownership.
Remove test_stream_life, which tested that buildTileIndex() behaved
correctly when SkStream was a ref counted object. The test does not
make sense now that it is not.
In SkPDFStream, remove the SkMemoryStream member. Instead of using it,
create a new SkMemoryStream to pass to fDataStream (which is now an
SkAutoTDelete).
Make other pdf rasterizers behave like SkPDFDocumentToBitmap.
SkPDFDocumentToBitmap delete the SkStream, so do the same in the
following pdf rasterizers:
SkPopplerRasterizePDF
SkNativeRasterizePDF
SkNoRasterizePDF
Requires a change to Android, which currently treats SkStreams as ref
counted objects.
Review URL: https://codereview.chromium.org/849103004
This fixes every case where virtual and SK_OVERRIDE were on the same line,
which should be the bulk of cases. We'll have to manually clean up the rest
over time unless I level up in regexes.
for f in (find . -type f); perl -p -i -e 's/virtual (.*)SK_OVERRIDE/\1SK_OVERRIDE/g' $f; end
BUG=skia:
Review URL: https://codereview.chromium.org/806653007
Remove SkLCGRandom. We already decided the new one was better, which is
why we wrote the new SkRandom.
Convert GMs that were using SkLCGRandom to use the improved SkRandom.
Motivated by the fact that these GMs draw differently on some runs. We
believe this to be a result of using the old SkLCGRandom.
Add each of the tests that were using SkLCGRandom to ignore-tests.txt,
since we expect they'll draw differently using SkRandom.
Move a trimmed down version of SkLCGRandom into SkDiscretePathEffect.
In order to preserve the old behavior, trim down SkLCGRandom to only
the methods used by SkDiscretePathEffect, and hide it in
SkDiscretePathEffect's cpp file.
BUG=skia:3241
Review URL: https://codereview.chromium.org/805963002
This fixes errors like this:
../../include/gpu/effects/GrPorterDuffXferProcessor.h:27:25: error:
'name' overrides a member function but is not marked 'override'
[-Werror,-Winconsistent-missing-override]
BUG=skia:3075
TEST=ninja -C out/Debug skia_lib
TBR=bsalomon@google.com
Review URL: https://codereview.chromium.org/804813002
This CL cleans up the existing violations and enables the
build time check to ensure that we don't regress.
The motiviation behind this change is to allow clients who include
our headers to be able to build with this warning enabled.
Review URL: https://codereview.chromium.org/726923002
blink skips all pending commands during picture recording if it is drawing an opaque full-frame
geometry or image. This may improve performance for some edge cases. To recognize an opaque
full-frame drawing should be cheap enough. Otherwise, the overhead will offset the improvement.
Unfortunately, data from perf for content_shell on Nexus7 shows that SkDeferredCanvas::isFullFrame
is far from cheap. Table below shows that how much isFullFrame() costs in the whole render process.
benchmark percentage
my local benchmark(draw 1000 sprites) 4.1%
speedReading 2.8%
FishIETank(1000 fishes) 1.5%
GUIMark3 Bitmap 2.0%
By contrast, real recording (SkGPipeCanvas::drawBitmapRectToRect) and real rasterization
(GrDrawTarget::drawRect) cost ~4% and ~6% in the whole render process respectively. Apparently,
SkDeferredCanvas::isFullFrame() is nontrivial.
getDeviceSize() is the main contributor to this hotspot. The change simply save the canvasSize and
reuse it among drawings if it is not a fresh frame. This change cut off ~65% (or improved ~2 times)
of isFullFrame().
telemetry smoothness canvas_tough_test didn't show obvious improvement or regression.
BUG=411166
Committed: https://skia.googlesource.com/skia/+/8e45c3777d886ba3fe239bb549d06b0693692152R=junov@chromium.org, tomhudson@google.com, reed@google.com
Author: yunchao.he@intel.com
Review URL: https://codereview.chromium.org/545813002
Reason for revert:
This is leaking memory:
http://108.170.220.120:10117/builders/Test-Ubuntu13.10-GCE-NoGPU-x86_64-Debug-ASAN/builds/2516/steps/RunDM/logs/stdio
Original issue's description:
> Picture Recording: fix the performance bottleneck in SkDeferredCanvas::isFullFrame
>
> blink skips all pending commands during picture recording if it is drawing an opaque full-frame
> geometry or image. This may improve performance for some edge cases. To recognize an opaque
> full-frame drawing should be cheap enough. Otherwise, the overhead will offset the improvement.
> Unfortunately, data from perf for content_shell on Nexus7 shows that SkDeferredCanvas::isFullFrame
> is far from cheap. Table below shows that how much isFullFrame() costs in the whole render process.
>
> benchmark percentage
> my local benchmark(draw 1000 sprites) 4.1%
> speedReading 2.8%
> FishIETank(1000 fishes) 1.5%
> GUIMark3 Bitmap 2.0%
>
> By contrast, real recording (SkGPipeCanvas::drawBitmapRectToRect) and real rasterization
> (GrDrawTarget::drawRect) cost ~4% and ~6% in the whole render process respectively. Apparently,
> SkDeferredCanvas::isFullFrame() is nontrivial.
>
> getDeviceSize() is the main contributor to this hotspot. The change simply save the canvasSize and
> reuse it among drawings if it is not a fresh frame. This change cut off ~65% (or improved ~2 times)
> of isFullFrame().
>
> telemetry smoothness canvas_tough_test didn't show obvious improvement or regression.
>
> BUG=411166
>
> Committed: https://skia.googlesource.com/skia/+/8e45c3777d886ba3fe239bb549d06b0693692152R=junov@chromium.org, tomhudson@google.com, reed@google.com, yunchao.he@intel.comTBR=junov@chromium.org, reed@google.com, tomhudson@google.com, yunchao.he@intel.com
NOTREECHECKS=true
NOTRY=true
BUG=411166
Author: mtklein@google.com
Review URL: https://codereview.chromium.org/571053002
blink skips all pending commands during picture recording if it is drawing an opaque full-frame
geometry or image. This may improve performance for some edge cases. To recognize an opaque
full-frame drawing should be cheap enough. Otherwise, the overhead will offset the improvement.
Unfortunately, data from perf for content_shell on Nexus7 shows that SkDeferredCanvas::isFullFrame
is far from cheap. Table below shows that how much isFullFrame() costs in the whole render process.
benchmark percentage
my local benchmark(draw 1000 sprites) 4.1%
speedReading 2.8%
FishIETank(1000 fishes) 1.5%
GUIMark3 Bitmap 2.0%
By contrast, real recording (SkGPipeCanvas::drawBitmapRectToRect) and real rasterization
(GrDrawTarget::drawRect) cost ~4% and ~6% in the whole render process respectively. Apparently,
SkDeferredCanvas::isFullFrame() is nontrivial.
getDeviceSize() is the main contributor to this hotspot. The change simply save the canvasSize and
reuse it among drawings if it is not a fresh frame. This change cut off ~65% (or improved ~2 times)
of isFullFrame().
telemetry smoothness canvas_tough_test didn't show obvious improvement or regression.
BUG=411166
R=junov@chromium.org, tomhudson@google.com, reed@google.com
Author: yunchao.he@intel.com
Review URL: https://codereview.chromium.org/545813002
