This CL will be used to test for potential performance regressions (or
improvements?) that we might incur by disabling this optimization pass.
It will be reverted in ~1 day.
Change-Id: I775cdb0c95df81fa25ebbd66e4ff01f64c660f68
Bug: skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/378456
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
This reverts commit e4da7b672f.
Reason for revert: breaks SkSLBench perf test
Original change's description:
> Migrate if-statement simplifyStatement logic to IfStatement::Make.
>
> This performs essentially the same simplifications as before, just at
> a different phase of compilation.
>
> Change-Id: Ia88df6857d4089962505cd1281798fda74fd0b02
> Bug: skia:11343, skia:11319
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376177
> Commit-Queue: John Stiles <johnstiles@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
> Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: I0051188ffe69426904066eb60a932435efdc2af8
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:11343
Bug: skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379062
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This performs essentially the same simplifications as before, just at
a different phase of compilation.
Change-Id: Ia88df6857d4089962505cd1281798fda74fd0b02
Bug: skia:11343, skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376177
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
These variables were later being eliminated by the dead-code-elimination
pass, so you can't see them directly in the final output, but removing
them affects the name mangling off all future symbols, so it causes an
enormous ripple effect in the diff. And of course, it's a waste of time
and memory to synthesize IRNodes just to destroy them later.
If we disable control-flow analysis, we lose the dead-code-elimination
pass entirely; this change is also beneficial for emitting better code
when optimizations are turned off.
Change-Id: I882b3be4f3fd99b77d99b6abe128f26bb9252c89
Bug: skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/375776
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
The optimizer now properly recognizes all types of exits from a switch
statement. Break, continue and return are all potential exits and need
to be considered when determining the exit path from the switch.
Previously, dead code elimination was hiding the effects of this bug
from us, but it meant that an optimized switch had the potential to
generate lots of worthless IR nodes which then needed to be detected and
eliminated by the CFG. In particular, this affected the enum form of
blend, causing a catastrophic amount of extra work to be done.
Change-Id: If857e38cadfc016884624ea4db25a273ad3dce5b
Bug: skia:11352
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372958
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
When we detect a static switch, the optimizer finds the matching switch-
case and eliminates all the other switch-cases. It handles case
fall-through by scanning forward and looking for an unconditional break.
However, the inliner has an interesting quirk--it can replace `return`
statements inside of a switch with `continue` statements, since the body
of the inlined function has been wrapped with a for-loop to allow for
early exits. The optimizer does not recognize these continue statements
as exits from the switch (although they certainly qualify), so it
treats continues as fallen-through and keeps emitting switch-cases.
The dead-code elimination pass was actually doing us a favor here and
eliminating the excess code later. A flag was added to disable DCE in
order to reveal the problem in a test.
Change-Id: I8ff19fde5e32d0ab73d7c5411da40cb953a446f5
Bug: skia:11352
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372956
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
GLSL ES2 documentation on out parameters: "Evaluation of an out
parameter results in an l-value that is used to copy out a value when
the function returns."
The inliner does not do any alias checking when inlining an `out` param.
That is, passing the same variable to two separate `out` parameters
would not generate two distinct lvalues in the inlined code; it reuses
the same variable for each out-params in the inlined code.
(Amusingly, our CFG can fully optimize away this test code so it just
returns "red".)
Change-Id: Ib781d2cfdac54f01b6abe159af0c84ff24ff6976
Bug: skia:11326
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/370256
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Uses the pipeline-stage callback mechanism. It mangles the type name
(with a test to verify that this works), and then calls defineStruct
with the entire SkSL struct definition string.
Bug: skia:10939
Change-Id: If14cf1b11faaa80ad8d4086cdacf68532bac43fc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368809
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Fixes another instance of anglebug.com/2098 with advanced blend
functions.
Change-Id: I91863723d8b4c33ab2f5a527fe0374e8947bba16
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368813
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This creates a helper function, _entrypoint, which invokes main() and
assigns its result into sk_FragColor. We also make sure to prevent
sk_FragColor from being dead-stripped from the code during IR
generation.
At present this is useful for allowing our SkSL test shaders to compile.
Change-Id: I2d7fab0e1959a77778ffdb18ca569e869bcaeece
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/358525
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This will allow us to load these inputs for unit testing in `dm`.
Change-Id: Id256ba7c30d3ec94b98048e47af44cf9efe580d5
Bug: skia:11009
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/357282
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
The Inliner likes to move function bodies around; after inlining, code
can inadvertently move upwards, above ProgramElements that the code
relies on. We work around this by always emitting functions last.
Change-Id: Ie5486cc3a79a478920342fb9f578d575486fb4cf
Bug: skia:11186
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/354669
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
As far as I know, there shouldn't be a way to introduce a struct or enum
other than at global scope; the keywords are not accepted inside a
function body. In fact, I wasn't able to find a way to exercise these
code paths in practice. But we now have concrete assurance that any
possible type can be cloned into a symbol table safely; all Types are
either built-in (available everywhere by design) or are clonable.
Change-Id: I4b006b6cab995b3e598b683736ab9689828629c9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/354664
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This will flatten out expressions such as `!false` or `!true`. We
already had a similar fix-up at IR generation time which handled simple
cases, but this will catch more complicated ones like `!sk_Caps.xxxxx`
(since caps bits are only flattened out at constant propagation time).
Change-Id: I04282809d9a784266a64dbcafd097f3b0662806c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/351497
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Previously, a return statement inside a scoped Block would always result
in the return expression being assigned to a temporary variable instead
of replacing the function-call-expression directly. This was done
because there might be variables inside the Block; these would have
fallen out of scope when the expression is migrated to the call site,
resulting in an invalid expression.
We aren't actually examining the return expression so we don't know if
it uses variables from an inner scope at all. (Inspecting the return
expression for variable usage is certainly possible! But it's a fair
amount of code and complexity for a small payoff.)
However, we can very easily get most of the benefit here without paying
for the complexity. In this CL we now look for variable declarations
inside of scoped Blocks. If the code doesn't add any vardecls into
scoped Blocks, there's no risk of scope problems, and we don't need to
use a temp-var to store our return expressions. If any vardecls are
added, we go back to using a temp-var as before.
Change-Id: I4c81400dad2f33db06a1c18eb671ba2140232006
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/346499
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
We have a handful of tests that demonstrate this behavior indirectly,
but lacked a focused test.
Change-Id: I895cc4e3bebf30721ed649244e42bf170cc6ec06
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/346497
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Because we use `continue` for flow control handling now, we can escape
from the middle of a switch statement. This wasn't possible when we used
`break`.
This unlocks some pretty stellar optimization opportunities if the
switch value can be determined at compile time; see BlendEnum for an
example.
Change-Id: Id29be92c343c10fd604683a80c5d5bd2bd070cb0
Bug: skia:11097
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/345419
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
When we determine that a function only contains a single return
statement and it is at the top level (i.e. not inside any scopes),
there is no need to create a temporary variable and store the
result expression into a variable. Instead, we can directly replace
the function-call expression with the return-statement's expression.
Unlike my previous solution, this does not require variable
declarations to be rewritten. The no-scopes limitation makes it
slightly less effective in theory, but in practice we still get
almost all of the benefit. The no-scope limitation bites us on
structures like
@if (true) {
return x;
} else {
return y;
}
Which will optimize away the if, but leave the scope:
{
return x;
}
However, this is not a big deal; the biggest wins are single-line
helper functions like `guarded_divide` and `unpremul` which retain
the full benefit.
Change-Id: I7fbb725e65db021b9795c04c816819669815578f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/345167
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
If we aren't wrapping the inlined function body in a loop, there's no
need to add a scopeless Block; we've already got one. This doesn't
affect the final output meaningfully--it just suppresses a newline--but
it's one fewer IRNode allocation.
Change-Id: Ib7b0014e908586d8acfcf6c23520873fad31d0b7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/345163
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
do-while loops aren't compatible with GLSL ES2. For-loops which run
only one time should work exactly the same for our purposes. We expect
such a loop to be unrolled by every driver, so it shouldn't come at any
performance cost.
Change-Id: Ia8de5fcab8128c34da97eaeaf81f91ad1ac36ce4
Bug: skia:11097
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/345159
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Previously, multiple inliner passes in a row would each apply a
separate name mangling to variable names, so names like "_25_14_3_1_pos"
were not uncommon. This change demangles the name before re-mangling it,
so we would have just "_25_pos" instead.
It's not important, but it makes things easier to read.
Change-Id: I1257222dac2a68e337f431af230ce50730cedc9b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/345116
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This reverts commit e8e4aca955.
Reason for revert: can break ES2 for-loop rules
Original change's description:
> Declare all inlined variables at the topmost scope possible.
>
> By itself, this is uninteresting and even perhaps slightly
> counterproductive (as it separates vardecl from its initializer,
> increasing LOC). However, this enables a followup CL
> (http://review.skia.org/344665) which allows single-return functions to
> be inlined without the creation of a temporary variable at all. This
> applies to the majority of fragment processors in a typical Ganesh
> hierarchy. This change will greatly reduce the number of inliner-created
> temporary copies when compiling a typical tree of FPs.
>
> Change-Id: I03423a13cf35050637dabace4a32973a08a4ed0a
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/344764
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: John Stiles <johnstiles@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: Ica01d6906bcb9cef1f49d22dda714fc9cbfa3885
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/345121
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit 345d72124d.
Reason for revert: can break ES2 for-loop rules
Original change's description:
> Eliminate inliner temporary variables for functions with a single exit.
>
> When we determine that a function only contains a single return
> statement, there is no need to create a temporary variable and store the
> result expression into a variable. Instead, we can directly replace the
> function-call expression with the return-statement's expression.
>
> This dramatically simplifies the final optimized output from chains of
> very simple inlined functions, which is a very common pattern for trees
> of Skia fragment processors.
>
> Change-Id: I6789064a321daf43db2e1cef4915f25ed74d6131
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/344665
> Commit-Queue: John Stiles <johnstiles@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: I60845f22159605a06047b030e2686a769121a35a
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/345120
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
When we determine that a function only contains a single return
statement, there is no need to create a temporary variable and store the
result expression into a variable. Instead, we can directly replace the
function-call expression with the return-statement's expression.
This dramatically simplifies the final optimized output from chains of
very simple inlined functions, which is a very common pattern for trees
of Skia fragment processors.
Change-Id: I6789064a321daf43db2e1cef4915f25ed74d6131
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/344665
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
By itself, this is uninteresting and even perhaps slightly
counterproductive (as it separates vardecl from its initializer,
increasing LOC). However, this enables a followup CL
(http://review.skia.org/344665) which allows single-return functions to
be inlined without the creation of a temporary variable at all. This
applies to the majority of fragment processors in a typical Ganesh
hierarchy. This change will greatly reduce the number of inliner-created
temporary copies when compiling a typical tree of FPs.
Change-Id: I03423a13cf35050637dabace4a32973a08a4ed0a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/344764
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
The additional scopes were harmless, but didn't really add any value.
Originally they were used to tightly scope inlined variables, but we now
mangle inlined variable names.
Change-Id: I7b35e737598036c0b6d3d9f71cbcd4a53d609ce9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/344757
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Previously, GLSL and Metal code generators would emit a struct wherever
the type was first used in the code, regardless of where it was
originally defined or what scope the type needs to live in. This CL adds
a ProgramElement for struct definitions, so that structs will now appear
at the top-level as they were originally defined. In the case of Metal,
some special handling is also needed to handle the Globals struct
properly.
Not yet fully supported:
- No special handling for structs declared inside functions yet
- No support for structs in separate scopes with overlapping names
The severity of the remaining issues depends mostly on whether we want
to support structs inside functions in Runtime Effects.
Change-Id: Ia95d4529506cb3fa6da63f5cb548199a93e1c0c5
Bug: skia:10922, skia:10923, skia:10925, skia:10926
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/338600
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This reverts commit e81fb87bb4.
Reason for revert: checking results with less-aggressive inliner
Original change's description:
> Revert "Simplify _blend_set_color_saturation, removing an instruction."
>
> This reverts commit ed289e777c.
>
> Reason for revert: causing strange artifacts, only on Adreno
>
> Original change's description:
> > Simplify _blend_set_color_saturation, removing an instruction.
> >
> > This tightens up our intrinsics slightly; after inlining, it eliminates
> > one scratch variable. (We no longer need to copy `sda` into `hueColor`
> > as hueColor is now unchanged.)
> >
> > Change-Id: Iece5ba2fe11cde54481704a1787114a2c2a66d9b
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/336599
> > Commit-Queue: John Stiles <johnstiles@google.com>
> > Commit-Queue: Brian Osman <brianosman@google.com>
> > Auto-Submit: John Stiles <johnstiles@google.com>
> > Reviewed-by: Brian Osman <brianosman@google.com>
>
> TBR=brianosman@google.com,johnstiles@google.com
>
> Change-Id: Ica506467b0a4e03d0cbe482034acfa2d9f8d2c16
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/337560
> Reviewed-by: John Stiles <johnstiles@google.com>
TBR=brianosman@google.com,johnstiles@google.com
Change-Id: Ia93263f3269c057e7eaa69ca2b05e783d18c0199
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/337944
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Previously, we'd gauge suitability for inlining by counting the nodes in
a function; past a certain limit, the function was considered "too big."
Now, we also incorporate the number of times that function is called.
So if a function is called three times, and its size is 20 nodes, it
would be considered to have an inlining cost of 60 (3 * 20) instead of
20.
This should tamp down the aggressive nature of the inliner in cases like
gaussian convolution or complicated blends, and will hopefully satisfy
Pinpoint.
No change visible in Nanobench (which doesn't test any of these sorts of
patterns, but certainly inlines things): http://screen/AwD5hkgkEfjVx4g
Change-Id: Ie5e32898245ac854adb9ddd52d87001df6a67125
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/337676
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This reverts commit ed289e777c.
Reason for revert: causing strange artifacts, only on Adreno
Original change's description:
> Simplify _blend_set_color_saturation, removing an instruction.
>
> This tightens up our intrinsics slightly; after inlining, it eliminates
> one scratch variable. (We no longer need to copy `sda` into `hueColor`
> as hueColor is now unchanged.)
>
> Change-Id: Iece5ba2fe11cde54481704a1787114a2c2a66d9b
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/336599
> Commit-Queue: John Stiles <johnstiles@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
TBR=brianosman@google.com,johnstiles@google.com
Change-Id: Ica506467b0a4e03d0cbe482034acfa2d9f8d2c16
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/337560
Reviewed-by: John Stiles <johnstiles@google.com>
Previously, any builtin functions would be optimized as a side-effect of
optimizing programs that used them. Now that shared elements aren't
being optimized in that way, we explicitly optimize any shared modules
when they are first created. We don't remove dead elements, but we
we do substitute settings, simplify, and inline.
Bug: skia:10905
Change-Id: I701b5e9f52fb880ef3e6f4c67694d08602f47e95
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/336440
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
This tightens up our intrinsics slightly; after inlining, it eliminates
one scratch variable. (We no longer need to copy `sda` into `hueColor`
as hueColor is now unchanged.)
Change-Id: Iece5ba2fe11cde54481704a1787114a2c2a66d9b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/336599
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This will reorder constructors with swizzles applied, such as
`half4(1, 2, 3, 4).xxyz` --> `half4(1, 1, 2, 3)`
`half4(1, colRGB).yzwx` --> `half4(colRGB.x, colRGB.y, colRGB.z, 1)`
Note that, depending on the swizzle components, some elements of the
constructor may be duplicated and others may be eliminated. The
optimizer makes sure to leave the swizzle alone if it would duplicate
anything non-trivial, or if it would eliminate anything with a side
effect.
Change-Id: I470fda217ae8cf5828406b89a5696ca6aebf608d
Bug: skia:10954
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/335860
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
The optimizer can now turn the expression `half4(1).xyz` into
`half3(1)`, or `half4(1).w` into `1`. This is actually a somewhat common
case when inlining chains of fragment processors, as inputs are often
overridden to `half4(1)` or `half4(0)`. This optimization also applies
to more complex cases, e.g.:
`half2(anyFunc(sqrt(2))).yxyx` --> `half4(anyFunc(sqrt(2)))`
Since the interior of the constructor is always evaluated once in either
case, it does not actually matter what the constructor contains.
Change-Id: I8d5f358502eaa8e35d4968e74fbd6b0ce2ab6365
Bug: skia:10954
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/335818
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This prevents OOMing when given a pathological input, but is large
enough that almost all inputs should continue to compile as-is.
Change-Id: If5c46711b886ee08495bfd09af537e9dc7ea5649
Bug: skia:10945, oss-fuzz:27442
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334838
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
In practice, the inline threshold does a good job of limiting the
blast radius here.
Change-Id: I495184116e733262ea9d84fec30885ea047ca116
Bug: skia:10945
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/334597
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This causes a ~4% regression on sksl_large, but some of that
can be bought back in two ways:
1) Removing (now unnecessary) cloning of program elements
2) Hoisting the new analysis passes, with (nontrivial)
logic to update/maintain the call counts as we edit IR.
Also, this fixes bugs where we were emitting functions that
had "calls" from no-longer called functions.
Bug: skia:10776
Change-Id: I4f8c29957be2e4233a883c9a1125f363b82ee40c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/327198
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
This golden verifies that when the inline threshold is zero, inlining is
not performed.
Change-Id: Icad6e1faed569dd1b2469874be3b9e635ad0b9ad
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/325656
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit 941fc7174f.
Reason for revert: performance now seems to be roughly equal or better
(~1%) over several trials.
Nanobench: http://screen/A8e8sojaXBgbMgF
Original change's description:
> Revert "Remove inliner from IR generation stage."
>
> This reverts commit 21d7778cb5.
>
> Reason for revert: Pinpoint absolutely hates this change
>
> Original change's description:
> > Remove inliner from IR generation stage.
> >
> > There is no need to inline code during IR generation, as the optimizer
> > can now handle this.
> >
> > Change-Id: If272bfb98e945a75ec91fb4aa026e5631ac51b5b
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/315971
> > Commit-Queue: John Stiles <johnstiles@google.com>
> > Commit-Queue: Brian Osman <brianosman@google.com>
> > Reviewed-by: Brian Osman <brianosman@google.com>
> > Auto-Submit: John Stiles <johnstiles@google.com>
>
> TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
>
> Change-Id: I62c235415bcdc92a088e2a7f9c3d7dbf7e1bf669
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317976
> Reviewed-by: John Stiles <johnstiles@google.com>
> Commit-Queue: John Stiles <johnstiles@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: I6189806c678283188f4b67ee61e5886f88c2d6fc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/324891
Reviewed-by: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This greatly improves the output from a profiler. It makes it much
easier to determine how much time is spent in searching for candidates,
versus actually inlining them.
It also improves the code readability somewhat by breaking a large
monolithic function into several smaller functions.
Change-Id: I1b3ef6ddbe46af60e673f37ded766f8077ed6b03
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/321376
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
We don't need to create a temporary variable for expressions like
`half3(x)`.
Change-Id: Ie0fa6a6dfb3d77d4372f96c676d3081f7e278852
Bug: skia:10786
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/320960
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
The following types of expression are hoisted directly into the
inlined code:
- Struct field access: `myStruct.myField`
- Swizzles: `myVector.xzy`
- Simple array indexes: `myArray[0]`
This significantly reduces the number of temporary variables generated
by the inliner.
Change-Id: Ifed226ecc87b096ec1e38752c0c38ae32bd31578
Bug: skia:10737, skia:10786
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/319919
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
These cover:
- Properly configured out-params
- Invalid/non-lvalue out-params, which currently cause an SkSL crash
- Interactions between the inliner and variable swizzles
Change-Id: I4874101236084f273e704d8717149b431d813883
Bug: skia:10753
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/319036
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
I realized that "DefaultSettings" as a name suffix was unclear, because
"Default" is a different settings mode from skslc running with
--nosettings.
In --nosettings mode, skslc uses "standalone" settings.
Change-Id: I1f5d80df0a21cec55948c4ad146169bcb34f4999
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/318210
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This wasn't rolled back automatically by the revert at
http://review.skia.org/317976, because this unit test did not exist yet
when that CL was submitted.
Change-Id: Ib887e74ddd32c1e576908bbe3d588205e26cdaa5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317978
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This reverts commit 910845fac1.
Reason for revert: IRGenerator inline change reverted
Original change's description:
> Add program-settings flag to disable the inliner.
>
> Change-Id: I6c4e7f6a2aab6710221029022a3a5f3ec323c5e2
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317856
> Commit-Queue: John Stiles <johnstiles@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: Ie38a29495ea8497f9db26d2603df179e696ac5ff
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317977
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit 21d7778cb5.
Reason for revert: Pinpoint absolutely hates this change
Original change's description:
> Remove inliner from IR generation stage.
>
> There is no need to inline code during IR generation, as the optimizer
> can now handle this.
>
> Change-Id: If272bfb98e945a75ec91fb4aa026e5631ac51b5b
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/315971
> Commit-Queue: John Stiles <johnstiles@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: I62c235415bcdc92a088e2a7f9c3d7dbf7e1bf669
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317976
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
