The SkRuntimeEffect fuzzer no longer uses the final 256 bytes of each
shader as uniform data, making this corpus obsolete.
(Fuzzer corpus change: https://github.com/google/oss-fuzz/pull/7266 )
Change-Id: I3df9213520390249f401c83c13f0bca5c7f0dde4
Bug: skia:12781
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/508036
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
I wasn't able to find any other test which exercised child color-filters
or child blenders. (SampleWithExplicitCoord evaluates from a shader.)
Change-Id: I58ecee3beca2d3dc11ded5de0eea031e1d7c3e1e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/507922
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Arman Uguray <armansito@google.com>
Commit-Queue: Arman Uguray <armansito@google.com>
These all stemmed from the same root cause, but are interesting and
distinct enough to include in our error tests.
Bug: oss-fuzz:44555, oss-fuzz:44557, oss-fuzz:44559, oss-fuzz:44561, oss-fuzz:44565
Change-Id: I22c1798809754b4b38c77ffbe369a97c64a2f60e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/507636
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
The fuzzer constructs a long, valid nonsense expression
(x+x+x-x+x-x, etc.) which exceeds parse depth. At that point, the token
stream points to a `+` token. The parser attempts to consume a new
statement but stops in `unaryExpression`; this fails again, due to the
max parse-depth, but doesn't consume a token. The parser continues
trying to parse the statement, but stopping in `unaryExpression`, making
no forward progress in an infinite loop.
I've made a couple of changes as a result.
- Exceeding the max parse depth now sets `fEncounteredFatalError`.
- Encountering a fatal error causes block() to immediately halt. This
actually undoes a few of the arbitrary changes from
http://review.skia.org/506463 but not in a bad way.
- `unaryExpression()` now consumes a token before checking parse-depth.
- `structDeclaration()` had a similar issue where it could potentially
fail without consuming any tokens; this is fixed as well.
- Some unnecessarily-nested logic in ternaryExpression() was flattened
while I tried to ensure that it always consumes a token.
Change-Id: I52c2161965ffbcef1185761ca6897ec1cba5df89
Bug: oss-fuzz:44551
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/507436
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
This enables the SkSL error testing logic for runtime effects. The core
logic is identical, only the ProgramKind differs.
(Error creation scripts: http://go/paste/6413797460803584 with some
light post-processing)
Change-Id: I877205b3cc1014b50ccccf6037a2f4034c07543e
Bug: skia:12665
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/506538
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Previously, when the parser found a bad statement inside a Block, it
would stop processing that Block entirely. This caused our brace
matching to fall out of balance. block() would normally only return once
the Block's closing brace was consumed, but in this case, the closing
brace would still be in the parse stream awaiting consumption even
though block() had returned.
Now, when a bad statement is found inside a Block, we just ignore it and
continue processing. (I tried injecting a poisoned statement as well,
to see if it would affect the test results, but they were identical.)
This seems to generate somewhat better errors.
Change-Id: I8dc781d5602bf99d7610f8280cde8b7c1925cb65
Bug: skia:12868
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/506463
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
std::stringstream has a subtle bug in OS X 10.12. Reading in a too-large
floating point value returns INFINITY but does not set failbit. This
caused SkSL to report a different error message than expected
("floating point value is infinite" instead of "floating-point value
is too large: NNNNN"). We now guard against this case in SkSL::stod by
adding an explicit `isfinite` check.
Bug: skia:12928
Change-Id: I9996e64b69512ea5710e6fc3ff00ad1ad83c247b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/505939
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This breaks on OS X 10.12: http://screen/7A9bumDr8Z4ihcy
Debugging is difficult via a trybot. This CL can be reverted once the
root cause is discovered and fixed.
Change-Id: Ibbfadc9fbe39eb8d1755e6f382b806d1d648a6fe
Bug: skia:12928
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/505803
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
We no longer enforce a particular string form of 3.41e+38.
Change-Id: I33b8a30aa3c7ab54de0c7f4a02181b60cd8f71a3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/505799
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This was (crudely) automated with shell scripts:
http://go/paste/5484300603490304
Change-Id: Ic9e1c93112772d303d1158eb26d995f27b439eba
Bug: skia:12665
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/505637
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This reverts commit 43539c22a2.
Reason for revert: UB fixed at http://review.skia.org/505678
Original change's description:
> Revert "Verify that tests in errors/ actually generate the expected errors."
>
> This reverts commit 8d646c127a.
>
> Reason for revert: triggering UBSAN
> http://screen/887FeQtZWs2A6oo
>
> Original change's description:
> > Verify that tests in errors/ actually generate the expected errors.
> >
> > Error expectations are embedded in the source with a special *%%*
> > marker, like this:
> >
> > /*%%*
> > expected 'foo', but found 'bar'
> > 'baz' is not a valid identifier
> > *%%*/
> >
> > This unit test compiles every effect in errors/ and verifies that it
> > makes an error. It also verifies that the errors returned include the
> > expectations from the *%%* marker section, in the listed order, if any
> > expectations have been listed. (Error expectations are not meant to be
> > exhaustive; additional errors are allowed.)
> >
> > In this CL, I've manually attached error expectations to the first few
> > error tests. A followup CL will (mechanically) add expectations to every
> > error test, based on their current error reports.
> >
> > Change-Id: I4add30fef6419c4d3f8d2a221c5aeb53eee35ae7
> > Bug: skia:12665
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/505399
> > Auto-Submit: John Stiles <johnstiles@google.com>
> > Reviewed-by: Brian Osman <brianosman@google.com>
> > Commit-Queue: Brian Osman <brianosman@google.com>
>
> Bug: skia:12665
> Change-Id: I3bcdbe9fc1abab13656d6462b73f6439967fd96f
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/505642
> Auto-Submit: John Stiles <johnstiles@google.com>
> Commit-Queue: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
> Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Bug: skia:12665
Change-Id: I49e23869f4ef383a0b076006e319e0a6d7191cad
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/505643
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit 8d646c127a.
Reason for revert: triggering UBSAN
http://screen/887FeQtZWs2A6oo
Original change's description:
> Verify that tests in errors/ actually generate the expected errors.
>
> Error expectations are embedded in the source with a special *%%*
> marker, like this:
>
> /*%%*
> expected 'foo', but found 'bar'
> 'baz' is not a valid identifier
> *%%*/
>
> This unit test compiles every effect in errors/ and verifies that it
> makes an error. It also verifies that the errors returned include the
> expectations from the *%%* marker section, in the listed order, if any
> expectations have been listed. (Error expectations are not meant to be
> exhaustive; additional errors are allowed.)
>
> In this CL, I've manually attached error expectations to the first few
> error tests. A followup CL will (mechanically) add expectations to every
> error test, based on their current error reports.
>
> Change-Id: I4add30fef6419c4d3f8d2a221c5aeb53eee35ae7
> Bug: skia:12665
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/505399
> Auto-Submit: John Stiles <johnstiles@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:12665
Change-Id: I3bcdbe9fc1abab13656d6462b73f6439967fd96f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/505642
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Error expectations are embedded in the source with a special *%%*
marker, like this:
/*%%*
expected 'foo', but found 'bar'
'baz' is not a valid identifier
*%%*/
This unit test compiles every effect in errors/ and verifies that it
makes an error. It also verifies that the errors returned include the
expectations from the *%%* marker section, in the listed order, if any
expectations have been listed. (Error expectations are not meant to be
exhaustive; additional errors are allowed.)
In this CL, I've manually attached error expectations to the first few
error tests. A followup CL will (mechanically) add expectations to every
error test, based on their current error reports.
Change-Id: I4add30fef6419c4d3f8d2a221c5aeb53eee35ae7
Bug: skia:12665
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/505399
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
These tests only generate an error in the SPIR-V or GLSL backends. We
will soon enforce that everything in errors/ must actually fail to
compile.
Change-Id: Ic54707eb3bfa19287b4ed52335066fc0fbf19ec1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/505397
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This mirrors a lot of the existing matrix ES2 tests, but using
non-square matrices. This is still important because a lot of subtle
bugs can slip through the cracks when rows == columns.
Change-Id: I626c4c2b176c8280da64513d16f59e76e726cbe7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/505218
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
GPUs that failed continued to fail when I put in error bars like
`distance(a, b) <= 0.001`, so they're just disabled entirely now.
Presumably their results are very busted.
Change-Id: I0f1b80f661563a20630740f8cfb6ef69f2a47934
Bug: skia:11209, skia:12858
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/503817
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Requires tweaking one inliner test to avoid an Intel driver bug (on
ANGLE).
Bug: chromium:709351
Cq-Do-Not-Cancel-Tryjobs: true
Change-Id: I08fac938396d6b90805ba9650c7a520af888bc12
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/503819
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Let variable axes override existing or determine style information
with priority over FreeType face flags or information
from the OS/2 table.
Add test case for matching a variable fonts through SkFontMgr_FCI to
ensure the weight determination from variable axes is exercise.
The test does not exercise width or slant.
Add a small (~8.5k) subsetted Noto Sans CJK collection as a test font
(made using [1]), and ensure that matching, reported font style and axis
configuration are correct after matching.
[1] https://github.com/drott/noto-cjk/blob/subsetVFttv/subsetvf.py
Bug: skia:12864, skia:12881
Change-Id: I1fb05d88f68eda308b8864d32d98400c68e46834
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/500516
Commit-Queue: Dominik Röttsches <drott@chromium.org>
Reviewed-by: Ben Wagner <bungeman@google.com>
Auto-Submit: Dominik Röttsches <drott@chromium.org>
Commit-Queue: Dominik Röttsches <drott@google.com>
Test "InlinerHonorsGLSLOutParamSemantics" was failing on Wembley devices
and is now disabled on that GPU.
Also, it turns out that the inliner has ignored functions with out
params for a long time now, but our test names haven't been updated to
account for this. So, did some additional cleanup:
- "InlinerHonorsGLSLOutParamSemantics" (the test in question) has been
moved to shared/ and renamed to "OutParamsAreDistinct."
- Removed test "OutParamsNoInline" as it is functionally the same as
"OutParams".
Change-Id: I1431ed197b9216cb482eee4f5e4eb2579a5303f7
Bug: skia:12858
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/502303
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
sk_SecondaryFragColor corresponds to an ES2-only concept
(gl_SecondaryFragColorEXT) and does not have any SPIR-V equivalent.
Two fixes were needed:
- sk_SecondaryFragColor shouldn't be in SPIR-V code at all. Report it as
an error when it appears.
- We don't stop compilation when this error is reported, so we need to
fix up the assertion that the fuzzer initially discovered.
Specifically, the fuzzer found that the `sk_SecondaryFragColor`
variable never got a SPIR-V ID assigned to it in fVariableMap, so the
compiler would assert when assembling an expression containing that
variable. Now, we make sure to populate fVariableMap with an (unused)
ID in `writeGlobalVar` to avoid this crash.
Change-Id: Ib86919dfc9a325b2b82a7f4b2054b747dad7c32f
Bug: oss-fuzz:44096
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/501976
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
GLSL ES2 behavior is explicitly undefined if an out-param is never
written to: "If a function does not write to an out parameter, the value
of the actual parameter is undefined when the function returns."
We do see divergence here in practice: SkVM's behavior (the parameter is
left alone) differs from my GPU's behavior (the parameter is zeroed
out).
SkSL will now report an error if an out parameter is never assigned-to.
There is no control flow analysis performed, so we will not report
cases where the out parameter is assigned-to on some paths but not
others. (Technically the return-on-all-paths logic could be adapted
for this, but it would be a fair amount of work.)
Structs are currently exempt from the rule because custom mesh
specifications require an `out` parameter for a Varyings struct, even if
your mesh program doesn't need Varyings.
Bug: skia:12867
Change-Id: Ie828d3ce91c2c67e008ae304fdb163ffa88d744c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/500440
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
The test has been moved to shared/, since it's a valid test, but it is
no longer related to inlining, as the inliner no longer attempts to
inline functions with inouts at all.
Also, one function here (outParameterIgnore) actually invoked undefined
behavior and has been removed. According to the GLSL ES2 docs: "If a
function does not write to an out parameter, the value of the actual
parameter is undefined when the function returns." SkVM leaves the value
unchanged, so SKSL_TEST_CPU would pass, but a GPU might clear it (and in
fact, my GPU does).
Change-Id: I77c77ed1354bc980344ec5c406992bd62015f5e5
Bug: skia:11919
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/499752
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
The current implementation uses multiplicative composition for opacity
animators (modulate_opacity always scales the new opacity by the old
value). That means that if one animator drops opacity all the way to
zero, there is no way for subsequent animators to increase opacity.
Instead, AE seems to use the same interpolation as for colors
(prev value/animator value, based on modulation param).
Update to use similar interpolation for opacity properties, and also
to only apply when opacity props are actually specified for a given
animator.
Change-Id: I5a96f9e3722399c8ec661a7843c86dfa60eac5ca
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/499376
Reviewed-by: Jorge Betancourt <jmbetancourt@google.com>
Commit-Queue: Florin Malita <fmalita@google.com>
In a followup CL, these will be updated to properly fold.
Change-Id: I20d125c0d54cbbcf12f7d096beda1fdf75e51b65
Bug: skia:12819
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/498617
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Previously, matrix-scalar operations did not actually fold, so the tests
didn't live in folding/. In a followup CL, these will fold.
Bug: skia:12819
Change-Id: I6fdacf89088920719e7666d6c9b05ddffaf6cb6d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/497742
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
SkSL is somehow interpreting a large positive value as a negative one.
Change-Id: I299e0bf389a9fcbfe697741bd33a54df07748753
Bug: skia:12863
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/499556
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Some paths through swizzle optimization would replace a swizzles with a
constructor--e.g. `float3(1, 2, 3).y` would be replaced with `float(2)`.
(Constructor::Convert was responsible for replacing this trivial
constructor with the literal `2.0`.)
The optimization code asserted that this replacement would succeed, but
the fuzzer managed to construct a counterexample where the constructor
rejected the value. Specifically, by nesting casts between int3 and
float3, it found a case where Constructor::Convert returned null because
the literal value was out of range for `int` types.
This assertion didn't really add value so removing it was harmless.
Constructor::Convert already reports an error when it fails, and null
returns are handled properly throughout.
Change-Id: I575d441ed90d6b696f6399941c3f6d84698794bc
Bug: oss-fuzz:44045
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/499382
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
These identifiers are reserved for SkSL internal use (and can't be
exposed to GLSL or Metal anyway).
Change-Id: Id554cbf21ed2fb66785e77700ff79424ecdf66db
Bug: skia:12854
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/498036
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
The change in [1] is likely responsible for a regression in which we're
not taking into account P2 for gradient skewing anymore.
Fix that, and add a test case to the gradient set of test cases.
Source for test glyph, see here:
https://github.com/googlefonts/color-fonts/pull/90/files
[1] 2da029b28f
Cq-Include-Trybots: luci.skia.skia.primary:Test-Android-Clang-GalaxyS20-GPU-MaliG77-arm64-Release-All-Android_NativeFonts,Test-Debian10-Clang-GCE-CPU-AVX2-x86_64-Debug-All-NativeFonts
Bug: skia:12822, chromium:1287162
Change-Id: I8b790e2a5c6c04487118306b4b38b1d77349431d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/494676
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Dominik Röttsches <drott@google.com>
Adding tests for matrix math and comparison
bug: skia:12681
Change-Id: Ia1537ee2e411383749456fd6ff938b7c9a2e1061
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/493416
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Julia Lavrova <jlavrova@google.com>
This looks like the GLSL driver in iOS generates wrong results when
returning a value from inside a switch.
Change-Id: I478a045c64c3dae9824f86f52e0c7f8f9685c9af
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/494476
Reviewed-by: Joe Gregorio <jcgregorio@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Change-Id: I3dabd77890a73ea054bb57d466a6ed8273eae3e8
Bug: skia:12811
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/494196
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Change-Id: Iecf1313af5f2938cb899f2a3e750ffc04554bae0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/493977
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
As @johnstiles suggested I add the test first and the fix after.
bug: skia:12712
Change-Id: I9316cf40f71e756fc1730ee630bc0d0377f200d6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/491936
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Julia Lavrova <jlavrova@google.com>
We used to reject ES3-style array declarations in strict-ES2 mode, so
this test originally expected two errors.
Change-Id: I17f71630076cda4b37b7723225dcff951eba9dcc
Bug: skia:12410
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/491997
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
GLSL ES2 doesn't support the ES3-style `type[size] name;` syntax. SkSL
always emits array decls in ES2-compatible syntax, regardless of the
ordering in the input code.
Change-Id: Ibf591713b2d506db7d63a6db8b79a3246f98c3cc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/491976
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
This reverts commit 6e686b8b8b.
Reason for revert: After internal discussion, we established that nobody was actually sure why this had needed to be an error in the old parser in the first place, so there does not appear to be a reason to carry the behavior forward.
Original change's description:
> Fixed SkSL error reporting on array types
>
> The DSLParser was not reporting errors when the array type appeared
> before the variable name (float[2] x) as opposed to after (float x[2])
> in strict ES2 mode.
>
> Bug: skia:12410
>
> Change-Id: Ia388aa150f65916dc3ccc58f7680dbde0a636c5f
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/491819
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Bug: skia:12410
Change-Id: I355fd1ad89e2e64b0377be7672b7f3f824eebac8
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/491996
Auto-Submit: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
The DSLParser was not reporting errors when the array type appeared
before the variable name (float[2] x) as opposed to after (float x[2])
in strict ES2 mode.
Bug: skia:12410
Change-Id: Ia388aa150f65916dc3ccc58f7680dbde0a636c5f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/491819
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Previously, type aliases ('vec2') were just an additional name which
could be used to refer to a type ('float2'). This was simple and worked,
except that error messages would be wrong - any type-related error
message would refer to the type as 'float2' rather than the 'vec2' that
the user actually typed.
This CL adds an AliasType class so that we can track which name was
used to refer to an aliased type and report messages using the correct
type name.
Bug: skia:12737
Change-Id: I40e234239ab47557033e0695e4fbbd5f01da354e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/490256
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Bug: oss-fuzz:43062
Change-Id: I10d8fa40c81c5b1595d30221d89c84f5cc3478fd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/490857
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Structs already handled this appropriately, but interface blocks did not
guard against naming their member variables built-in type names like
"float" or "bool".
Change-Id: I12ec054b3f158b83e35031449cf2a088ff8d0dc2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/489596
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
SkSL will reject ES2-compatible code because function parameters always
require a name in SkSL. (A followup CL relaxes this restriction and
allows anonymous parameters in SkSL.)
Change-Id: Ifdcf0fcbe0f52d16007c018b545631ca4033a8c4
Bug: skia:12769
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/489537
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Structs and interface blocks allow a trailing identifier which is added
to the symbol table. This identifier should be prohibited from
overlapping built-in types; at present, this is not checked. Add a test
demonstrating the issue.
Change-Id: I99aa915c1715c468cc369c97b7f12e031b86ea4a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/489496
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Note that the 2D cross product isn't defined. There are at least two
possible interpretations of what that might mean. This name makes it
clearer that we're asking for the length of the resulting vector, if
we computed the 3D cross product (assuming Z == 0 for both vectors).
It also eliminates name overlap between builtin functions and actual
intrinsics.
Change-Id: I24e8bc0ab2ec91aaace20f0dd3e8565c10bd44a0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/484440
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
The debug-slot code didn't expect to encounter a void type.
Change-Id: Ied452b51e1cf90a0c0bc24770f82e711105b8e82
Bug: skia:12708
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/482461
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
