This allows directories in sources, e.g.
$ fm -b cpu -s skimage/dm/01_original.jpg -w foo
skimage/dm/01_original.jpg f181c4655d0f55d7000dd04a4d28d407 330ms
$ find foo
foo
foo/skimage
foo/skimage/dm
foo/skimage/dm/01_original.jpg.png
where previously,
$ fm -b cpu -s skimage/dm/01_original.jpg -w foo
sk_fopen: fopen("foo/skimage/dm/01_original.jpg.png", "wb") returned nullptr
(errno:2): No such file or directory
libpng error: HashAndEncode::encodePNG() failed writing stream
Signal 6:
_sigtramp (+0x1d)
Change-Id: I6950d77cacba16363315fb8d5c6d866d207c9a25
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/392198
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Try to uncover races by running parallel replicas.
The default --race 0 should keep FM working as before, but now with
--race ≥2 we'll actively try to race replicas, syncing between tests.
--race 1 is almost pointless, just changing the thread tests run on but
without any interesting concurrency.
Rearrange a bit how fm_driver decides what flags to pass to which
invocations of FM, so individual runs can easily override defaults (e.g.
--nativeFonts overriding the usual --nonativeFonts). Use that here to
set --race 0 for unit tests; many unit tests are not reentrant.
Change-Id: Ida451626c093793b0805d3036beb185e7d54f27e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376761
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
tabl_mozilla.skp is uselessly large without a clip.
Change-Id: I6e8ab8c31e790b6629be01e6eeb2e8d60c6ff56f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/378360
Reviewed-by: Brian Osman <brianosman@google.com>
We think this has the same effect as written right?
I'm looking ahead to a mode of FM where each round
of this loop might run in a different thread, and
I think there we'd want to give each its own pool?
Change-Id: I8f4e215fb2f96f4fe433d15f8654445200fdca5d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/377896
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This does mean we won't print the name of a failing source, but that
shouldn't be needed so much given how FM runs on the bots... should be
obvious what failed without it.
On the flip side, this means each log line will print out atomically,
which might be nice when reading through TSAN runs with async threads.
Change-Id: Ib971416f255e60ea6d900ea687abb8404d799dfd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/377916
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Just refactoring code that predates SkColorInfo.
Change-Id: Iba5ffdf91e2e2517bf55ea8c5a36c4fe6583a6b3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376760
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
If a batch fails, we've got to rerun everything (or at least from the
failure on), but when it's merely unknown hashes, no need to rerun
what's produced hashes we know already.
Small tweak to FM to keep all the printed source names exactly what's
passed in, keeping the whole path for skp/svg/image files. This means
zero bookkeeping needed to know what to rerun when parsing that output.
Change-Id: I1e7ed3ee51158b68a6bdd3152560f3a282109576
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365818
Reviewed-by: Mike Klein <mtklein@google.com>
Without this we'd assert on empty container size.
Change-Id: I697d607af40ac6e62039be33aedb8ff1732d41b8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/364839
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Part of the larger work to remove drawImage from canvas (and in general
simplify our apis w.r.t. older patterns like skbitmap).
Change-Id: If208927e1d46256519036c42e68aec3d3c809a82
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/358836
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Move the SVG rendering code to modules/svg, and componentize.
Also split into include/src/utils.
As external clients still reference the old header locations,
introduce temporary forwarding headers to facilitate the migration.
This reverts commit d6cf56fd34.
TBR=
Change-Id: Ibadd7c8dc0464ec0c27841530ade0c2098305d20
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/327344
Commit-Queue: Florin Malita <fmalita@google.com>
Reviewed-by: Florin Malita <fmalita@google.com>
This reverts commit 6fc4106a9d.
Reason for revert: Blocking the Android roll
Original change's description:
> [svg] Relocate out of experimental
>
> Move the SVG rendering code to modules/svg, and componentize.
> Also split into include/src/utils.
>
> As external clients still reference the old header locations,
> introduce temporary forwarding headers to facilitate the migration.
>
> Change-Id: Ib289dbdcd80c16a01c47805e7242f2e08bebc165
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326948
> Reviewed-by: Tyler Denniston <tdenniston@google.com>
> Commit-Queue: Florin Malita <fmalita@google.com>
TBR=fmalita@chromium.org,fmalita@google.com,tdenniston@google.com
Change-Id: I386cf77a15a9e1d392029804abaf937dae53f435
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/327342
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Move the SVG rendering code to modules/svg, and componentize.
Also split into include/src/utils.
As external clients still reference the old header locations,
introduce temporary forwarding headers to facilitate the migration.
Change-Id: Ib289dbdcd80c16a01c47805e7242f2e08bebc165
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/326948
Reviewed-by: Tyler Denniston <tdenniston@google.com>
Commit-Queue: Florin Malita <fmalita@google.com>
This reverts commit 21f8b51099.
Reason for revert: D3D traced resource assert from unit test
Original change's description:
> Revert "Revert "Use ManagedBackendTexture in place of TestUtils backend texture helpers.""
>
> This reverts commit f625e4ce45.
>
> Change-Id: Id73c53ec7ab8d4a5951712dc150d86e6349addbf
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/325658
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=egdaniel@google.com,bsalomon@google.com
# Not skipping CQ checks because this is a reland.
Change-Id: I407f1d522d5c4f28d070cc2ce87af7faffca11fd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/325860
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 5ee0556048.
Reason for revert: breaking bots
Original change's description:
> Use ManagedBackendTexture in place of TestUtils backend texture helpers.
>
> Unify on a single family of helpers for making backend textures.
>
> Stresses callback systems in more tests by avoiding artificial
> flush/submit/syncs.
>
> some misc test cleanup along the way.
>
> Change-Id: Ia692e8927ba97b391ee77ea06ebf437a555617b2
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/324710
> Commit-Queue: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Greg Daniel <egdaniel@google.com>
TBR=egdaniel@google.com,bsalomon@google.com
Change-Id: I7d4fc9412c870ae13f7498671379b871dbf5a6c4
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/325619
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Unify on a single family of helpers for making backend textures.
Stresses callback systems in more tests by avoiding artificial
flush/submit/syncs.
some misc test cleanup along the way.
Change-Id: Ia692e8927ba97b391ee77ea06ebf437a555617b2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/324710
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Add helper to create self-managed BackendTexture-backed SkSurface for
tests using MBET.
GrGpu::createTestingOnlyBackendRenderTarget supports protected.
Make SkSurfaceCharacterization tests use self-managed SkSurface
factories and a use case of MakeFromBackendTextureAsRenderTarget is
removed.
Use self-managed BackendTexture-backed SkSurface factory in DM sinks and
in fm.
Bug: skia:9832
Change-Id: I0c1dc49697f8b3c942864e18b9112a3552f431ba
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/323559
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Encode as PNG to an SkWStream instead of a path.
It's just as natural at the call sites, if not more so,
and is more flexible for environments without a filesystem.
While here, tweak the method names and add some comments.
Change-Id: I8ce9869471fc7e1a0955d51ecb621e76c2e1d4d8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/323509
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Adds a new helper that creates a GrBackendRenderTarget using
GrGpu and then wraps it in a SkSurface. Uses the SkSurface
release proc to delete the BERT using GrGpu.
Upgrades GrGpu::createTestingOnlyBackendRenderTarget to create MSAA
buffers.
Updates many tests/tool to call sites to use the helper instead of
SkSurface::MakeFromBackendTextureAsRenderTarget.
Adds syncToCpu bool to SkSurface:: and GrContext::flushAndSubmit.
Bug: skia:9832
Change-Id: I73a8f0ce09dc6523729af0814464c6b6657fda06
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/293683
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
This is a reland of c1916c34fe
As it turns out, benches are not always given a canvas.
Original change's description:
> Remove use of legacy display globals.
>
> In the ongoing effort to remove the display globals from Skia, allow
> their use only if SK_LEGACY_SURFACE_PROPS is defined. Do not define this
> in a normal Skia build and remove all use from Skia code.
>
> Change-Id: I9ff550f5db246b9024aac687a1bc01321f1be4c8
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/319343
> Reviewed-by: Herb Derby <herb@google.com>
> Commit-Queue: Ben Wagner <bungeman@google.com>
Change-Id: I61a2ac058fafc99653e3304876cf4b97350dac8b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/322490
Reviewed-by: Ben Wagner <bungeman@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
This reverts commit c1916c34fe.
Reason for revert: Bots unhappy
Original change's description:
> Remove use of legacy display globals.
>
> In the ongoing effort to remove the display globals from Skia, allow
> their use only if SK_LEGACY_SURFACE_PROPS is defined. Do not define this
> in a normal Skia build and remove all use from Skia code.
>
> Change-Id: I9ff550f5db246b9024aac687a1bc01321f1be4c8
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/319343
> Reviewed-by: Herb Derby <herb@google.com>
> Commit-Queue: Ben Wagner <bungeman@google.com>
TBR=djsollen@google.com,bungeman@google.com,herb@google.com,reed@google.com
Change-Id: I365d2b1d19241a90130bc1b59663651817966f63
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/322400
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
In the ongoing effort to remove the display globals from Skia, allow
their use only if SK_LEGACY_SURFACE_PROPS is defined. Do not define this
in a normal Skia build and remove all use from Skia code.
Change-Id: I9ff550f5db246b9024aac687a1bc01321f1be4c8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/319343
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
We're not using -foo today to do anything but print a "sorry" error.
Might as well make it something productive.
In this case, it happens that Codec_PngRoundTrip is flaky on my laptop;
I'm guessing the blame belongs with CoreGraphics. Anyway, this lets me
skip it but run all other tests with a line like
tests -Codec_PngRoundTrip b=cpu
Change-Id: I479a71575eadfc1f870a3c48c130b2b57797ac54
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/317316
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
The most interesting part of the CL is that we recheck gSkVMAllowJIT in
Program::eval() even though we've already checked it in the constructor.
This allows Viewer to toggle the JIT on and off without having to worry
about program caching. This is not something that you'd expect to come
up in practice if a program just sets gSkVMAllowJIT at the start of
main(); for real clients I think we can avoid all this with a simple
SkGraphics::allowJIT() that only lets clients opt-in, never back out.
I toyed with making '!' rotate through a tristate in Viewer, until I
realized that these really are independent bits: GMs like threshold_rt
that use both ordinary effects and SkVM-only effects demonstrate
different behavior and performance in all four modes. So '!' continues
to toggle SkVMBlitter, and now '@' toggles the JIT.
I've left the test program default settings unchanged, with the JIT
enabled unless --nojit is passed. Where we previously simplified the
command line by conflating --dylib with --skvm, we now conflate --dylib
with --jit.
Change-Id: If86bf524c657298c0846bcd33c706e3c3f91e788
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/308184
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Once the existing cases are fixed, we can enable bugprone-argument-
comment to allow clang-tidy to verify these for us automatically going
forward. (http://review.skia.org/306848)
Change-Id: I5c21b28bcbdebb6b74c2924cc5f19c48446ecb42
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/306847
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: John Stiles <johnstiles@google.com>
Bug: 842296
Change-Id: I4564f96d4f179211df19893270ccc222abcdd446
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/305439
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Change-Id: Ia2cfbca8982b57399b6681cbb4501c2933ab4df7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/304576
Auto-Submit: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Everything was pretty much already plumbed through using
SkRasterPipeline, with a few key connections made here.
This support is mostly useful for differentially debugging my CLs
stacked on top of it.
Change-Id: I9c2f2ea6cd8890c057890409f21c7698857c599a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/303651
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
This pattern of needing a safe downcast will continue to grow as we
add more explicit use of GrDirectContext and it's causing long ternary
operations that span multiple lines.
Change-Id: I9e2ebe5156e4245524a52d7c92ed3a8509e53151
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/300901
Commit-Queue: Adlai Holler <adlai@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Auto-Submit: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This updates skiaserve, fm, and the fuzzer
Change-Id: Ia1b447b79723eeab73da11755d28f7ab443d5fbb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/300263
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This should, hopefully, clarify the role of onGpuSetup vis a vis onDraw.
The remaining tools are updated in:
https://skia-review.googlesource.com/c/skia/+/300220/ (Update remaining tools to GrDirectContext)
Change-Id: I19d6eec4d16cb9ebad8924763a18225cc871f0f2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/300172
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Since gpuSetup can preempt draw's execution it needs to draw the error message too.
This is pulled out of the gpuSetup refactoring.
Change-Id: Iafe06d924fc1b694c59aa3100e9fbe95c4773222
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/299140
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
I have a more complete fix in the works but this should unblock fm users.
Change-Id: I0af40f801f7d6d8c02b077b2e6b8ff2b875a4ad8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/298707
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
(This is a simple reland of
https://skia-review.googlesource.com/c/skia/+/293272
and is functionally unchanged, but needed to be reconstructed
manually because JavaInputStreamAdaptor.cpp was deleted.)
SK_ABORT was already using SkDebugf to print the error message to the
console, so all the moving parts were there. This CL just adds a
mechanism for the calling code to pass in arguments.
Added a use case to demonstrate usage--when an allocation fails, the
requested size is now shown in the error message.
Change-Id: If8600a9febad15b7c8b7a04479a1d92442521f21
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/294705
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit 67e50a6b5c.
Reason for revert: roller complains about LICENSE issue. cl/314177415
Original change's description:
> Allow printf-style formatting to be used in SK_ABORT.
>
> SK_ABORT was already using SkDebugf to print the error message to the
> console, so all the moving parts were there. This CL just adds a
> mechanism for the calling code to pass in arguments.
>
> Added a use case to demonstrate usage--when an allocation fails, the
> requested size is now shown in the error message.
>
> Change-Id: I42f141151fb57a399c086926249816833f349ddb
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/293272
> Reviewed-by: Ben Wagner <bungeman@google.com>
> Reviewed-by: Herb Derby <herb@google.com>
> Commit-Queue: Ben Wagner <bungeman@google.com>
> Commit-Queue: John Stiles <johnstiles@google.com>
> Commit-Queue: Herb Derby <herb@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
TBR=djsollen@google.com,bungeman@google.com,herb@google.com,johnstiles@google.com
Change-Id: I7a2e98bcda82bbe6edfa3d00057586754df0ee71
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/293342
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
SK_ABORT was already using SkDebugf to print the error message to the
console, so all the moving parts were there. This CL just adds a
mechanism for the calling code to pass in arguments.
Added a use case to demonstrate usage--when an allocation fails, the
requested size is now shown in the error message.
Change-Id: I42f141151fb57a399c086926249816833f349ddb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/293272
Reviewed-by: Ben Wagner <bungeman@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Change-Id: Ifa25a44a75c6c193a8bd0780bda0f016fe3cbc31
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/283675
Commit-Queue: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Having GrAtlasManager.h in GrContextPriv.h was needlessly propagating dependence on that header.
Change-Id: Idf5836f1e217ecd2da91f751b488a63a884c02ce
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/281739
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Updated every switch that yelled at me, and added support to dm and fm,
and then founds some more switches that shouldn't have defaults...
The tricky spots outside those were mips and dither,
since they aren't simply exhaustive switches.
_Now_ no diffs between RGB/BGR 1010102 and 101010x.
No GPU support.
Bug: skia:9893
Change-Id: I73ab3fd22bdef0519296dfe4cb84031e23ca0be3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/270114
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Change-Id: I1b75e703123d90712b001921d5b1e132238076fa
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/265823
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This keeps an alias so code keeps building.
Bug: skia:9792
Change-Id: If8575468d929d2ca28bc2f9e82de27291fb19aa1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/264691
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This might be easier than building with SK_USE_SKVM_BLITTER defined.
Change-Id: I72c1f361195bacf5a14e6633dd49e9a5ad721cff
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/264383
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
For now, we'll have two copies. Once clients are using the skresources
versions exclusively, we can remove the originals from skottie.
Change-Id: I3152f526b0505b8374bdd9b4513a80bddc702ccc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/256416
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
I've punted for now on GPU test support.
Change-Id: I2ebe54a6fc61e1ce92120a6a221d5bb936b047e4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/255874
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This is handy for cutting irrelevant tool costs from a CPU profile.
Change-Id: Ib1d5a64a01866333e4e83351571dcb7c282ee9dc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/252152
Commit-Queue: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This is a reland of 6fc04f88a8
Original change's description:
> Reland "SkSurface asynchronous read APIs allow client to extend pixel lifetime"
>
> This is a reland of ce240cc6fd
>
> Original change's description:
> > SkSurface asynchronous read APIs allow client to extend pixel lifetime
> >
> > Previously the pixel data passed to the client was only valid during
> > the client's callback. This meant if the client wanted to defer
> > processing of the data a copy was necessary.
> >
> > Now we pass an object to the callback and the pixel lifetime is tied
> > to the lifetime of that object.
> >
> > The object may be holding a GPU transfer buffer mapped. We don't assume
> > that the object will be released on the direct GrContext thread. So
> > when the object is destroyed it posts a message to a new type,
> > GrClientMappedBufferManager, hanging off the direct context. The direct
> > context will periodically check for messages and unmap and then unref
> > buffers so that they can be reused. Currently this is done in
> > GrContext::performDeferredCleanup() and GrDrawingManager::flush().
> >
> > The old API is kept around for backwards compatibility but it is
> > reimplemented as a bridge on top of the new mechanism.
> >
> > Also a utility function to SkImageInfo is added to directly make a new
> > info with a specified dimensions rather than passing the width and
> > height separately to makeWH().
> >
> > Bug: chromium:973403
> > Bug: skia:8962
> >
> > Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
> > Reviewed-by: Brian Osman <brianosman@google.com>
> > Commit-Queue: Brian Salomon <bsalomon@google.com>
>
> Bug: chromium:973403, skia:8962
> Change-Id: I5cecd36276c8b6dc942cf549c7095db2df88530c
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245678
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: chromium:973403, skia:8962
Change-Id: Ie584c1c3ef8021c976f71b708e53871c693cc450
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/246057
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
