Now, that we are subsetting, fX0 is not necessarily less than
fSrcWidth (since fSrcWidth is really the subset width).
Ex: We may want a 10 pixel subset starting twenty pixels from the
left edge. In that case, fX0=20 and fSrcWidth=10.
Let's rename the width as fSubsetWidth to avoid confusion
and remove the check.
BUG=skia:
Review URL: https://codereview.chromium.org/1407603003
Iterating through the 903K skps that represent the
imagable 1M top web pages triggers a number of
bugs, some of which are addressed here.
Some web pages trigger intersecting cubic
representations of arc with their conic
counterparts. This exposed a flaw in coincident
detection that caused an infinite loop. The loop
alternatively extended the coincident section and,
determining the that the bounds of the curve pairs
did not overlap, deleted the extension.
Track the number of times the coincident detection
is called, and if it exceeds an empirically found
limit, assume that the curves are coincident and
force it to be so.
The loop count limit can be determined by enabling
DEBUG_T_SECT_LOOP_COUNT and running all tests. The
largest count is reported on completion.
Another class of bugs was caused by concident
detection duplicating nearly identical points that
had been merged earlier. To track these bugs, the
'handle coincidence' code was duplicated as a
const debug variety that reported if one of a
dozen or so irregularities are present; then it is
easier to see when a block of code that fixes one
irregularity regresses another.
Creating the debug const code version exposed some
non-debug code that could be const, and some that
was experimental and could be removed. Set
DEBUG_COINCIDENCE to track coincidence health and
handling.
For running on Chrome, DEBUG_VERIFY checks the
result of pathops against the same operation
using SkRegion to verify that the results are
nearly the same.
When visualizing the pathops work using
tools/pathops_visualizer.htm, set
DEBUG_DUMP_ALIGNMENT to see the curves after
they've been aligned for coincidence.
Other bugs fixed include detecting when a
section of a pair of curves have devolved into
lines and are coincident.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1394503003
Passing &SkGoodHash to SkTHashMap and SkTHashSet doesn't guarantee that it's actually instantiated. Using a functor does.
BUG=skia:
Review URL: https://codereview.chromium.org/1405053002
At the end of TightRunBounds, glyphPosX cannot exceed the start of the
next run. But glyphPosY is running ahead of glyphPosX (for
kFull_Positioning) => the glyphPosY assert is incorrect.
Since the two pointers advance in lock-step, there isn't much value in
the glyphPosY assert anyway - we might as well remove it.
BUG=chromium:542643
R=reed@google.com,bungeman@google.com
Review URL: https://codereview.chromium.org/1405463004
Result:
- clients can get a filtered version of an image without having to setup a temp drawing environment
- for some cases, the process is more efficient even than (deprecated) drawSprite, since there is no need to draw/copy the result
Impl:
- made Proxy virtual so we don't need to have an existing device to use it
This, in conjunction with LocalMatrixImageFilter, should allow us to simplify and optimize ApplyImageFilter() in cc/output/gl_renderer.cc
BUG=skia:
Review URL: https://codereview.chromium.org/1390913005
Rather than implementing some sort of "fill" in every
SkCodec subclass for incomplete images, let's make the
parent class handle this situation.
This includes an API change to SkCodec.h
SkCodec::getScanlines() now returns the number of lines it
read successfully, rather than an SkCodec::Result enum.
getScanlines() most often fails on an incomplete input, in
which case it is useful to know how many lines were
successfully decoded - this provides more information than
kIncomplete vs kSuccess. We do lose information when the
API is used improperly, as we are no longer able to return
kInvalidParameter or kScanlineNotStarted.
Known Issues:
Does not work for incomplete fFrameIsSubset gifs.
Does not work for incomplete icos.
BUG=skia:
Review URL: https://codereview.chromium.org/1332053002
The primary goal of SkScaledCodec is to replace the current
implementation of BitmapRegionDecoder, which depends on modified
versions of libjpeg and libpng, with an implementation that uses
standard versions of the libaries. Since BitmapRegionDecoder only
supports PNG, WEBP and JPEG, limit SkScaledCodec to those classes.
We will focus on those three until we complete this primary goal.
Then we can continue to make SkScaledCodec work for other formats.
Fix some bugs in SkScaledCodec::NewFromStream:
- Handle a NULL input stream properly
- Ensure that the input stream is deleted as expected on bad data
Add tests for these error cases.
BUG=skia:4428
Review URL: https://codereview.chromium.org/1389053002
Reason for revert:
Breaks Chrome with this link error: ../../third_party/skia/include/effects/SkMorphologyImageFilter.h:75: error: undefined reference to 'SkMorphologyImageFilter::SkMorphologyImageFilter(int, int, SkImageFilter*, SkImageFilter::CropRect const*)'
../../third_party/skia/include/effects/SkMorphologyImageFilter.h:104: error: undefined reference to 'SkMorphologyImageFilter::SkMorphologyImageFilter(int, int, SkImageFilter*, SkImageFilter::CropRect const*)'
Presumably due to code in third_party/WebKit/Source/platform/graphics/filters/FEMorphology.cpp that contains:
#include "SkMorphologyImageFilter.h"
...
if (m_type == FEMORPHOLOGY_OPERATOR_DILATE)
return adoptRef(SkDilateImageFilter::Create(radiusX, radiusY, input.get(), &rect));
return adoptRef(SkErodeImageFilter::Create(radiusX, radiusY, input.get(), &rect));
Original issue's description:
> factories should return baseclass, allowing the impl to specialize
>
> waiting on https://codereview.chromium.org/1386163002/# to land
>
> BUG=skia:4424
>
> Committed: https://skia.googlesource.com/skia/+/80a6dcaa1b757826ed7414f64b035d512d9ccbf8TBR=senorblanco@google.com,robertphillips@google.com,reed@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4424
Review URL: https://codereview.chromium.org/1389063002
To further consolidate the various unique owning classes, this bases
SkAutoTUnref on skstd::unique_ptr. Users are updated because of two
breaking changes, swap now takes a reference and reset no longer
returns its argument.
Review URL: https://codereview.chromium.org/1370803002
drawImage calls now properly embeds the original jpeg.
NOTE: drawBitmap*() calls no longer embed JPEG files when
possible (this is in advance of eliminating bitmaps backed
by encoded data). Chromium has already moved from
drawBitmap to drawImage.
Comparisons:
control:
total PDF drawImage/drawBitmap calls: 8010
total PDF jpeg images: 0
total PDF regular images: 3581
experiament:
total PDF drawImage/drawBitmap calls: 8014
total PDF jpeg images: 271
total PDF regular images: 3311
total PDF regular images: 3582 (271 + 3311)
When comparing rendered output there were perceptual
differences in the following four GMs: colorcube, emboss,
colormatrix, and tablecolorfilter. All of these differences
were improvements (that is, closer to the 8888 rendering)
due fixing a bug with colorfilters and forgetting to call
notifyPixelsChanged.
No SKPs had perceptual differences.
Total PDF size dropped from 133964 kB to 126276 kB, a 5.7%
improvement (mostly due to restoring use of JPG images in
SKPs).
BUG=skia:4370
Review URL: https://codereview.chromium.org/1372783003
Benefits:
- This mimics other decoding APIs (including the ones SkCodec relies
on, e.g. a png_struct, which can be used to decode an entire image or
one line at a time).
- It allows a client to ask us to do what we can do efficiently - i.e.
start from encoded data and either decode the whole thing or scanlines.
- It removes the duplicate methods which appeared in both SkCodec and
SkScanlineDecoder (some of which, e.g. in SkJpegScanlineDecoder, just
call fCodec->sameMethod()).
- It simplifies moving more checks into the base class (e.g. the
examples in skbug.com/4284).
BUG=skia:4175
BUG=skia:4284
=====================================================================
SkScanlineDecoder.h/.cpp:
Removed.
SkCodec.h/.cpp:
Add methods, enums, and variables which were previously in
SkScanlineDecoder.
Default fCurrScanline to -1, as a sentinel that start has not been
called.
General changes:
Convert SkScanlineDecoders to SkCodecs.
General changes in SkCodec subclasses:
Merge SkScanlineDecoder implementation into SkCodec. Most (all?) owned
an SkCodec, so they now call this-> instead of fCodec->.
SkBmpCodec.h/.cpp:
Replace the unused rowOrder method with an override for
onGetScanlineOrder.
Make getDstRow const, since it is called by onGetY, which is const.
SkCodec_libpng.h/.cpp:
Make SkPngCodec an abstract class, with two subclasses which handle
scanline decoding separately (they share code for decoding the entire
image). Reimplement onReallyHasAlpha so that it can return the most
recent result (e.g. after a scanline decode which only decoded part
of the image) or a better answer (e.g. if the whole image is known to
be opaque).
Compute fNumberPasses early, so we know which subclass to instantiate.
Make SkPngInterlaceScanlineDecoder use the base class' fCurrScanline
rather than a separate variable.
CodexTest.cpp:
Add tests for the state changes in SkCodec (need to call start before
decoding scanlines; calling getPixels means that start will need to
be called again before decoding more scanlines).
Add a test which decodes in stripes, currently only used for an
interlaced PNG.
TODO: Add tests for onReallyHasAlpha.
Review URL: https://codereview.chromium.org/1365313002
SkGlyphCache dumps too many glyphs, and to reduce the trace size,
RequestDetails enum is added to SkTraceMemoryDump interface. This
would tell caches to dump only requested details or not a detailed
dump.
BUG=499731
Review URL: https://codereview.chromium.org/1310123007
An alternative way of addressing this is to alter SkCanvas::drawRoundRect to just reject isEmpty (i.e., un-sorted or truly empty) input rects.
BUG=skia:3786
Review URL: https://codereview.chromium.org/1373293002
- use C++11 features ({} init, move constructors) to eliminate the need
for explicit constructors
- collapse RECORD0...RECORD8 into just one RECORD macro
- explicitly tag record types instead of using member detectors.
Removing member detectors makes this code significantly less fragile.
This exposes a few places where we didn't really think through what to do
with SkDrawable. I've marked them TODO for now.
BUG=skia:
Review URL: https://codereview.chromium.org/1360943003
Reason for revert:
Need to somehow get access to encoders in chrome -- link error on the roll since SkImageEncoder is not built as part of chrome.
Original issue's description:
> change pixel-serializer to support reencoding existing data
>
> Trying to evolve this interface so it can
> - support rich set of backend-encoders (including ones like ETC1 that can cheaply convert to KXT
> - allow for encoding images as well as bitmaps (e.g. for picture serialization)
> - perhaps replace SkImageEncoder as an API (assuming we create a factory that returns a serializer given a format)
>
> BUG=skia:
>
> Committed: https://skia.googlesource.com/skia/+/13f48dc85aa68a60da66aaf39c93d527d11d1278TBR=scroggo@google.com,msarett@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review URL: https://codereview.chromium.org/1371983003
Trying to evolve this interface so it can
- support rich set of backend-encoders (including ones like ETC1 that can cheaply convert to KXT
- allow for encoding images as well as bitmaps (e.g. for picture serialization)
- perhaps replace SkImageEncoder as an API (assuming we create a factory that returns a serializer given a format)
BUG=skia:
Review URL: https://codereview.chromium.org/1373683003
The test "nullptr == fBlockMemory->fHead->fNext" tests that
all of the data is in one block, but it is also necessary to
test "fBlockMemory->fHead" to ensure that there is a first
block with data in it.
Review URL: https://codereview.chromium.org/1374493002
One side effect is that the SkShader's (or implicit shader's) fragment processor is responsible for the transition from an unpremul paint color to a premul color.
Review URL: https://codereview.chromium.org/1348583002
These tests were isolated from their respective minimized test cases.
The tests work fine and pass path ops internal validation;
hopefully some more intensive x-san or valgrind test will help
isolate the bug.
Sheriff, please revert if it fails and I don't get to it first.
TBR=reed@google.com,halcanary@google.com
BUG=535127,535151
Review URL: https://codereview.chromium.org/1359263003
Motivation: I want too finalize this API before working on the more
complex problem of adding XMP metadata for PDF/A.
BUG=skia:3110
Review URL: https://codereview.chromium.org/1359943003
libjpeg-turbo turns on dithering by default. When we
decode to RGBA, it uses Floyd-Steinberg dithering -
consistent with the libjpeg6b gold standard,
When we decode to 565, it uses ordered dithering. Ordered
dithering for 565 is not part of the 6b standard (libjpeg6b
doesn't even support 565) and is causing us a number of
issues:
(1) Ordered dithering + nearest neighbor sampling is
causing checkerboard visual artifacts in some outputs.
(2) The ordered dither function in libjpeg-turbo actually
behaves differently depending on the alignment of the
memory that it decodes into. This means that two image
decodes that should be identical may look different just
because they decode into different memory blocks. This
was causing some diffs on Gold with the scanline_subset
test that were causing me some confusion.
(3) Maybe not the best evidence, but visually I can't tell
a difference with and without dithering (except when
nearest neighbor scaling causes the checkerboard artifact).
(4) Turning off dithering should be a more significant
performance improvement than you might expect.
libjpeg-turbo has SIMD color conversions to 565, but when
dithering is on, it defaults to scalar code.
This CL should make every jpeg decode to 565 on Gold look
slightly different. Yay!
BUG=skia:
Review URL: https://codereview.chromium.org/1349563007
