This change address what happens when a jpeg is partially downloaded
before failing. Many browsers will render it anyway: we want Skia to
do the same. The JpegTest takes a perfectly cromulent jpeg file and
only passes into the ImageDecoder the first half of the image. We
then verify that the image decoder returns a valid bitmap of the
correct dimensions.
We also fixed some png library errors, including issue 1691.
Also, suppressed the majority of warnings from using libpng and
libjpeg. By default, most warnings are *not* suppressed in debug mode.
If you have a debug binary and wish to suppress warnings, set the
following environment variables to true
skia_images_png_suppressDecoderWarnings
skia_images_jpeg_suppressDecoderWarnings
or from within a program that links to Skia:
#if defined(SK_DEBUG)
#include "SkRTConf.h"
SK_CONF_SET("images.jpeg.suppressDecoderWarnings", true);
SK_CONF_SET("images.png.suppressDecoderWarnings", true);
#endif
I tested this, before (control) and after these changes (test), on
364,295 skps from the cluster telemetry.
- number of errors+warnings in control = 2804
- number of errors+warnings fixed = 2283
- number of PNG verbosity fixed = 2152
- number of PNG error fixed = 4
- number of PNG segfault fixed = 3
- number of PNG errors changed to warnings = 62
- number of JPG verbosity fixed = 26
- number of JPG error fixed = 91
Not all errors and warning have been fixed.
These numbers were generated using the find_bad_images_in_skps.py
program. This program may be useful going forward for testing
image-decoding libraries on skp files from the cluster telemetry.
find_bad_images_in_skps.py depends on the test_image_decoder program,
which simply executes the SkImageDecoder::DecodeFile function and uses
its exit status to report success or failure.
BUG=skia:1649
BUG=skia:1691
BUG=skia:1680
R=scroggo@google.com
Review URL: https://codereview.chromium.org/24449003
git-svn-id: http://skia.googlecode.com/svn/trunk@11597 2bbb7eff-a529-9590-31e7-b0007b416f81
These guys are not heavily contended nor speed critical. No need for atomics,
plus this makes tsan stop complaining (correctly) about reading fNextIndex
unsafely in onEnd.
I took a look at failCount/fFailCount, which I think is safely atomic and quite
conveniently so: It's never read until all the threads which could possibly
increment it have terminated (except for the one where it was created,
obviously). We could guard it with a mutex too, but maybe we can let this one
slide.
BUG=
R=bungeman@google.com
Author: mtklein@google.com
Review URL: https://codereview.chromium.org/25357002
git-svn-id: http://skia.googlecode.com/svn/trunk@11561 2bbb7eff-a529-9590-31e7-b0007b416f81
Only implemented for PNG.
Add a getter and setter, and sets the default to false in the
constructor. Also copies the setting in copyFieldsToOther.
Fix an indpendent bug where fDitherImage was not being copied in
copyFieldsToOther.
In SkScaledBitmapSampler::begin, consolidate the settings passed in
by passing a const reference to the decoder. The decoder can be
referenced for its settings of dither, unpremultiplied, and now
skipping writing zeroes. Update callers to use the new API. In png
decoder, rather than passing around a pointer to an initial
read of getDitherImage, and potentially changing it, look at the
field on the decoder itself, and modify it directly. This is a
change in behavior - now if that same decoder is used to decode
a different image, the dither setting has changed. I think this is
okay because A) the typical use case is to use a new decoder for
each decode, B) we do not make any promises that a decode does not
change the decoder and C) it makes the code in SkScaledBitmapSampler
much cleaner.
In SkScaledBitmapScampler, add new row procs for skipping zeroes. Now
that choosing the row proc has five dimensions (src config, dst config,
dither, skip writing zeroes, unpremultiplied), use a new method: each
src/dst combination has a function for choosing the right proc depending
on the decoder.
SkScaledBitmapScampler::RowProc is now public for convenience.
Remove Sample_Gray_D8888_Unpremul, which is effectively no different
from Sample_Gray_D8888.
In cases where unpremultiplied was trivial, such as 565 and when
sampling from gray, decoding may now succeed.
Add a benchmark (currently disabled) for comparing the speed of skipping
writing zeroes versus not skipping. For this particular image, which is
mostly transparent pixels, normal decoding took about 3.6 milliseconds,
while skipping zeroes in the decode took only about 2.5 milliseconds
(this is on a Nexus 4). Presumably it would be slower on an image
with a small amount of transparency, but there will be no slowdown
for an image which reports that it has no transparency.
In SkImageRef_ashmem, always skip writing zeroes, since ashmem
memory is guaranteed to be initialized to 0.
Add a flag to skip writing zeroes in skimage.
Add a regression test for choosing the rowproc to ensure I did not
change any behavior accidentally.
BUG=skia:1661
R=reed@google.com
Review URL: https://codereview.chromium.org/24269006
git-svn-id: http://skia.googlecode.com/svn/trunk@11558 2bbb7eff-a529-9590-31e7-b0007b416f81
Only affects factories, static functions that will use the factories,
and subset decoding, which all require rewinding. The decoders
themselves continue to take an SkStream. This is merely documentation
stating which functions will possibly rewind the passed in SkStream.
This is part of the general change to coordinate SkStreams with
Android's streams, which don't necessarily support rewinding in all
cases.
Update callers to use SkStreamRewindable.
BUG=skia:1572
R=bungeman@google.com, reed@google.com
Review URL: https://codereview.chromium.org/23477009
git-svn-id: http://skia.googlecode.com/svn/trunk@11460 2bbb7eff-a529-9590-31e7-b0007b416f81
I'm seeing basically no difference between malloc + bzero and calloc on my desktop, but on a Galaxy Nexus calloc is never slower, and significantly faster once the allocation size becomes large, both for allocation and for _reading_.
BUG=skia:1662
R=reed@google.com
Review URL: https://codereview.chromium.org/24251008
git-svn-id: http://skia.googlecode.com/svn/trunk@11414 2bbb7eff-a529-9590-31e7-b0007b416f81
Last week, the fuzzer found a few numerical issue with filters and I had written some fixes for them. Here are the fixes with some unit tests.
For senorblanco : So I figured out what was asserting when we'd get a 0 width "result" in SkBicubicImageFilter::onFilterImage(). Basically, if the "result" SkBitmap object calls SkBitmap::setConfig() with "width" and/or "height" set to 0, then the SkBitmap object will call SkBitmap::reset(), making the SkBitmap object's config invalid. At this point, calling SkBitmap::getAddr32() will assert, even without attempting to dereference the data pointer, because the SkBitmap's config is invalid. If height is valid, but width is 0, then this call to SkBitmap::getAddr32() happens directly in SkBicubicImageFilter::onFilterImage() a few lines lower and asserts right away.
BUG=
R=senorblanco@google.com, senorblanco@chromium.org, bsalomon@google.com
Author: sugoi@chromium.org
Review URL: https://chromiumcodereview.appspot.com/23533042
git-svn-id: http://skia.googlecode.com/svn/trunk@11249 2bbb7eff-a529-9590-31e7-b0007b416f81
