Everyone is responsible to set up their own scissor and textures now.
Change-Id: Ic3547f00c0e7908409631951de4b7237b9bce23b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/277177
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This CL moves the boiler-plate implementation of onPrePrepareDraws up to GrMeshDrawOp. This, unfortunately, required the addition of a 'programInfo' virtual but that may go away in the future.
The only GrMeshDrawOp-derived classes left are:
AAHairlineOp - which has 3 programInfos
AAFlatteningConvexPathOp - which has >=1 mesh (but just 1 programInfo)
GrAtlasTextOp - which has inline uploads
SmallPathOp - which, maybe, has inline uploads
TextureOp - which has chaining
Bug: skia:9455
Change-Id: Id10f70e764054134751545ad38b99f0a0778de76
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/276642
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This CL:
Renames the existing createProgramInfo method to onCreateProgramInfo and makes it a virtual on GrMeshDrawOp
Moves the non-virtual createProgramInfo (helper) calls to GrMeshDrawOp
Changes onCreateProgramInfo to not return a ProgramInfo*. This is setting up to handle ops that create >1 programInfo (e.g., AAHairlineOp)
This CL leaves the following 8 ops in need of an onCreateProgramInfo implementation:
AAHairlineOp
AAFlatteningConvexPathOp
GrAtlasTextOp
GrShadowRRectOp
SmallPathOp
GrTextureOp
PrimitiveProcessorTest::Op
VertexColorSpaceBench::Op
Bug: skia:9455
Change-Id: Id7e2b8a40cac86ede6bf3c0e544da5500ff47d8a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/276403
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
This reverts commit 1c16b43033.
Reason for revert: Red on tree
Original change's description:
> Move makeDeferredRenderTargetContext calls to factory on RTC.
>
> Change-Id: Iaa8f5829d9f8650ff27a60f75fb2216f016ab85e
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262058
> Commit-Queue: Greg Daniel <egdaniel@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=egdaniel@google.com,bsalomon@google.com
Change-Id: I9e3c9d13c66b5437c87ad7136d283fa4ac81df1f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263019
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
This is a first step towards pulling the creation of the GrProgramInfos explicitly into the Ops' onExecute methods. We need this behavior so programInfo creation can be moved forward to onPrePrepare.
For now, pipeline creation is a static member on GrSimpleMeshDrawOpHelper so GrPipeline creation can be bottle-neckedOps for Ops that don't use the helper. In some future world CreatePipeline could become non-static to reduce some of the duplicate code.
Bug: skia:9455
Change-Id: I2d35dd223db824e84616f5df0f1dca34c1b6e412
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/258003
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
When iterating over the coord transforms or texture samplers of a
FP also have access to the owning FP.
Pass a coord transform range to GPs rather than a pointer to an
iterator.
Change-Id: If7c829a67dce6600d7f49e12d6f49f685dcace3a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/256216
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
This CL is 100% plumbing. We ultimately want all GrPrimitiveProcessor-derived objects to not be refCounted. This will make several helper objects POD and, by putting them into an arena, will make managing their lifetime easier (e.g., for DDL prePreparing).
Note: the CCPR GrGeometryProcessor-derived classes only ever appear on the stack so aren't forced into arenas.
Bug: skia:9455
Change-Id: Ib9be503d2fbf8c2578642df93fc301156629829d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/255304
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Also don't specify redundant width/height to SkGpuDevice.
Change-Id: I389df5c4b073c2c05632ba6b7c95b02a22dfaf98
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235824
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
config is completely redundant. No caller really cares what the backend
format is.
Change-Id: I93f1feb3ee61db6c21b7915bab3ee3fba5656f92
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/225194
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This is largely redundant with GrPixelConfig. However, we intend to
remove GrPixelConfig.
Bug: skia:7580
Change-Id: I03d92303be832711f7821f8a97d36387c9b04a9f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/222883
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
From now on, sample counts always refer to the number of actual color
samples, and render targets don't have separate color and stencil
sample counts.
If mixed samples support is available when making a
"GrAAType::kCoverage" draw, then an op may attach and use a mixed
sampled stencil buffer internally. But this will all be invisible to
the client.
After this CL, we temporarily won't have a mode to use nvpr with mixed
samples. That will soon be fixed by a follow-on CL that enables nvpr
with mixed samples in the normal "gl" and "gles" configs.
Bug: skia:
Change-Id: I1cb8277f0d2d0d371f24bb9f39cd473ed5c5c83b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/221878
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Current strategy: everything from the top
Things to look at first are the manual changes:
- added tools/rewrite_includes.py
- removed -Idirectives from BUILD.gn
- various compile.sh simplifications
- tweak tools/embed_resources.py
- update gn/find_headers.py to write paths from the top
- update gn/gn_to_bp.py SkUserConfig.h layout
so that #include "include/config/SkUserConfig.h" always
gets the header we want.
No-Presubmit: true
Change-Id: I73a4b181654e0e38d229bc456c0d0854bae3363e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/209706
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Hal Canary <halcanary@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Bug: skia:8243
Change-Id: I5d976e2740bd0348e1c71cea2cda05d93bc004e9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/201397
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Previously, we relied on ops to deduce whether a draw would have
hardware coverage modulation as a result mixed samples. This is
problematic because *any* draw can have mixed samples coverage if
there is a multisampled stencil clip. No ops were checking for stencil
clip, and most just said they never used mixed samples.
Now that the only usecase for mixed samples is the stencil buffer,
this CL makes the processorSet automatically deduce mixed samples
coverage from the stencil settings and fsaaType.
Bug: skia:
Change-Id: Ib69b84bc03b12f6efb8e7d6ed721ae1612785315
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/197281
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This is a reland of dfe5000a5f
Original change's description:
> Stack-allocate pipelines for GrMeshDrawOp
>
> Stack-allocates the pipelines in onExecute. This saves us from having
> to store the pipelines on the heap, as well as delaying the need to
> detach processors until onExecute. The delay is an improvement because
> it allows us to keep visiting proxies after onPrepare. (Previously,
> they were moved out of GrProcessorSet and into a pipeline during
> onPrepare, so visiting proxies was impossible after that point.)
>
> Bug: skia:8731
> Change-Id: Idc05063fb0dfbfed42b434e429fa5a497097bdae
> Reviewed-on: https://skia-review.googlesource.com/c/193368
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=robertphillips@google.com
Bug: skia:8731
Change-Id: I32def1a35bb0593470fa672691a9e697dc6d9680
Reviewed-on: https://skia-review.googlesource.com/c/195261
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This reverts commit dfe5000a5f.
Reason for revert: HWAA pipeline flag not getting set for dashing.
Original change's description:
> Stack-allocate pipelines for GrMeshDrawOp
>
> Stack-allocates the pipelines in onExecute. This saves us from having
> to store the pipelines on the heap, as well as delaying the need to
> detach processors until onExecute. The delay is an improvement because
> it allows us to keep visiting proxies after onPrepare. (Previously,
> they were moved out of GrProcessorSet and into a pipeline during
> onPrepare, so visiting proxies was impossible after that point.)
>
> Bug: skia:8731
> Change-Id: Idc05063fb0dfbfed42b434e429fa5a497097bdae
> Reviewed-on: https://skia-review.googlesource.com/c/193368
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=robertphillips@google.com,csmartdalton@google.com
Change-Id: If706f19423310846de70288f393ac12f17ffeee5
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:8731
Reviewed-on: https://skia-review.googlesource.com/c/195161
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Stack-allocates the pipelines in onExecute. This saves us from having
to store the pipelines on the heap, as well as delaying the need to
detach processors until onExecute. The delay is an improvement because
it allows us to keep visiting proxies after onPrepare. (Previously,
they were moved out of GrProcessorSet and into a pipeline during
onPrepare, so visiting proxies was impossible after that point.)
Bug: skia:8731
Change-Id: Idc05063fb0dfbfed42b434e429fa5a497097bdae
Reviewed-on: https://skia-review.googlesource.com/c/193368
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Mechanical. This makes the priv() accessor the same for all the context types.
Change-Id: I40850eb05a33b8d7cc3eabdd42226d24b2ba58aa
Reviewed-on: https://skia-review.googlesource.com/c/189164
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Adds setVertexAttributes and setInstanceAttributes. These take a pointer
to the first attribute, and a count. The count is the total number of
possible attributes, though some may not be initialized. The base class
computes the number of initialized attributes, pre-computes the strides,
and only allows subsequent access to the initialized attributes.
The attributes need to be allocated contiguously. Some GPs place them in
an array, though most just place them as consecutive members, and pass
a pointer to the first one.
Indexed access would be possible, but now it makes more sense to iterate
over all attributes, so enable that, and use range-based for everywhere.
Completely remove the per-attribute offset helper (again - possible, but
not real helpful), and make the stride always available. In many ops,
just use the GP's computed stride, rather than re-computing it.
Bug: skia:
Change-Id: Ie4cccb7969a98ee5a10b373e714fbd702e875b3e
Reviewed-on: https://skia-review.googlesource.com/c/169241
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 51b1c12bbc.
Reason for revert: reverting till flutter gets to 1.1 to fix build issues.
Original change's description:
> Have a GrBackendFormat be stored on gpu proxies.
>
> Bug: skia:
> Change-Id: Iaf1fb24ab29a61d44e5fa59a5e0867ed02dcda90
> Reviewed-on: https://skia-review.googlesource.com/c/168021
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Greg Daniel <egdaniel@google.com>
TBR=egdaniel@google.com,bsalomon@google.com,brianosman@google.com
Change-Id: I574fdc084ef5994596c51fb0d60423b5dc01b885
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:903701 chromium:903756
Reviewed-on: https://skia-review.googlesource.com/c/169835
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Bug: skia:
Change-Id: Iaf1fb24ab29a61d44e5fa59a5e0867ed02dcda90
Reviewed-on: https://skia-review.googlesource.com/c/168021
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
The CPU type is still specified using GrVertexAttribType.
The GPU type is specified directly using GrSLType.
kHalfX_GrVertexAttribType now really means half-float buffer
data, rather than float. (Caveat: The GL enum is only correct
with ES3/GL3 - ES2+extension needs a different value. Sigh.)
Bug: skia:
Change-Id: Ife101db68a5d4ea1ddc2f6c60fbec0c66d725c16
Reviewed-on: https://skia-review.googlesource.com/154628
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit fdf05f4ff4.
Reason for revert: Android fixed after removing multitexture support from TextureOp.
Original change's description:
> Revert "Move GrGeometryProcessor's textures out of classes and into"
>
> This reverts commit af87483873.
>
> Revert "GrGeometryProcessor derives from GrNonAtomicRef not GrProgramElement."
>
> This reverts commit 607be37e3d.
>
> Revert "Store GrMeshDrawOps' meshes in GrOpFlushState's arena."
>
> This reverts commit b948572c78.
>
> Revert "Remove multitexturing support from GrTextureOp."
>
> This reverts commit 986f64c601.
>
> Revert "Make result of GrOp::combineIfPossible be an enum."
>
> This reverts commit 641ac7daa8.
>
> Bug: b/112244393
> Change-Id: I579491a3f2f2f2093f1e2a6141fa1e4cc7b760a4
> Reviewed-on: https://skia-review.googlesource.com/145646
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com
Change-Id: I1d41c2ecf7862e31fb025a7a00bb07bae9d83a47
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: b/112244393
Reviewed-on: https://skia-review.googlesource.com/145780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit af87483873.
Revert "GrGeometryProcessor derives from GrNonAtomicRef not GrProgramElement."
This reverts commit 607be37e3d.
Revert "Store GrMeshDrawOps' meshes in GrOpFlushState's arena."
This reverts commit b948572c78.
Revert "Remove multitexturing support from GrTextureOp."
This reverts commit 986f64c601.
Revert "Make result of GrOp::combineIfPossible be an enum."
This reverts commit 641ac7daa8.
Bug: b/112244393
Change-Id: I579491a3f2f2f2093f1e2a6141fa1e4cc7b760a4
Reviewed-on: https://skia-review.googlesource.com/145646
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This is to prepare for a third value that requests that ops be linked
together so that the first op may do the work for multiple linked ops
without actually merging the GrOp objects.
Change-Id: Ib6e012a89be5edd054aee69d8475bea612331852
Reviewed-on: https://skia-review.googlesource.com/145522
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: Brian Salomon <bsalomon@google.com>
Remove late draw consolidation in GrOpFlushState. Rarely did anything
and doesn't work with new allocation strategy. Ops can use GrMesh arrays
to acheive the same thing. (Each Op that cared to would have to implement
but it isn't applicable to most Ops).
Modify GrMeshDrawOp::Target::draw() to take array of meshes, with single
mesh as a special case.
Change-Id: I552677de47b9ffd2fcaf55af85f70f290e5aa9c7
Reviewed-on: https://skia-review.googlesource.com/145426
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
It probably doesn't need to be ref counted at all and should be stored
in GrOpFlushState's arena but that's a larger change for another day.
Change-Id: I5f593fb426b8e7794f2ca81194f5a8d9e0f0a072
Reviewed-on: https://skia-review.googlesource.com/145332
Auto-Submit: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
The most common use-case for F16 is to draw things that are explicitly
outside of [0,1]. We can't prevent out-of-range values in general, users
could just draw out-of-range content in src mode. We've decided that
it's best to avoid surprising behavior, and trust the user in these
situations.
This effectively reverts https://skia-review.googlesource.com/c/skia/+/48183
Bug: skia:
Change-Id: I71c2dd925c567e2862d96ab70c752f19245a69c4
Reviewed-on: https://skia-review.googlesource.com/140500
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Remove scissor rect from GrPipeline.
Draws can specify "fixed dynamic state" which doesn't use the dynamism at
all or can specify dynamic state arrays with an entry per GrMesh.
When we state other than scissor rects this will allow the caller to
use a mix of truly dynamic and fixed dynamic state. So a caller that
only has dynamic scissor rects doesn't need to store its remaining
unvarying state in an array.
Change-Id: I8fcc07eb600c72a26cc712b185755c2116021a8a
Reviewed-on: https://skia-review.googlesource.com/137223
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 19c1233c44.
Reason for revert: want to make sure Google3 can roll
Original change's description:
> Change how vertex/instance attributes are handled in geometry processors.
>
> * No longer register vertex/instance attributes on base class, just counts
>
> * Separate instance and vertex attributes and remove InputRate and offset
>
> * Make attributes constexpr where possible
>
> Change-Id: I1f1d5e772fa177a96d2aeb805aab7b69f35bfae6
> Reviewed-on: https://skia-review.googlesource.com/132405
> Commit-Queue: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Chris Dalton <csmartdalton@google.com>
TBR=egdaniel@google.com,bsalomon@google.com,csmartdalton@google.com
Change-Id: I4800632515e14fbf54af52826928ac915657b59f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/135661
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
* No longer register vertex/instance attributes on base class, just counts
* Separate instance and vertex attributes and remove InputRate and offset
* Make attributes constexpr where possible
Change-Id: I1f1d5e772fa177a96d2aeb805aab7b69f35bfae6
Reviewed-on: https://skia-review.googlesource.com/132405
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Chris Dalton <csmartdalton@google.com>
There is no good way to split the monster CL up. This breaks out
the GrContext plumbing but doesn't use it.
Change-Id: I90856d428d372bcec3f8821e6364667b367927d4
Reviewed-on: https://skia-review.googlesource.com/133382
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Most of this is (obviously) not necessary to do, but once
I started, I figured I'd just get it all. Tools (nanobench,
DM, skiaserve), all GMs, benches, and unit tests, plus support
code (command line parsing and config stuff).
This is almost entirely mechanical.
Bug: skia:
Change-Id: I209500f8df8c5bd43f8298ff26440d1c4d7425fb
Reviewed-on: https://skia-review.googlesource.com/131153
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
