It's been driving me nuts that I can't just write `SkMatrix44 m;`,
and I often don't care whether it's initialized or not. The default
identity constructor would be nice to use, but it's deprecated.
By tagging this constructor deprecated, we're only hurting ourselves;
our big clients disable warnings about deprecated routines and use it
freely.
A quick tally in Skia shows we mostly use the uninitialized constructor,
but sometimes the identity constructor, and there is a spread of all
three in Chromium. So I've left the two explicit calls available.
I switched a bunch of calls in Skia to use the less verbose constructor
where it was clear that it didn't matter if the matrix was initialized.
Literally zero of the kUninitialized constructor calls looked important
for performance, so the only place I've kept is its lone unit test.
A few places read clearer with an explicit "identity" to read.
Change-Id: I0573cb6201f5a36f3b43070fb111f7d9af92736f
Reviewed-on: https://skia-review.googlesource.com/c/159480
Reviewed-by: Brian Osman <brianosman@google.com>
I keep seeing it show up on the profile(usually under memmove) of tight
benchmarks and it's kind of distracting. We don't even print it when
we pass --quiet, so that seems like a nice way to stifle it.
Change-Id: I3a67a7ca1758fd35e3b63cfeeddeac4ff1ffe38d
Reviewed-on: https://skia-review.googlesource.com/157520
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Nothing's using it except test tools.
I'd like to make that a bit clearer by getting it out of src.
Disabled the fuzzer.
Removed the bench so Android's building nanobench doesn't block this.
Bug: chromium:886713
Change-Id: I761f52c40171c27ff4b699409b32647e84684ec3
Reviewed-on: https://skia-review.googlesource.com/156240
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
On my Z840, Windows-Clang-Debug, this cuts the total time to construct
(parse) the 72 SVG sources from 66 seconds to 40 seconds. That's still
awful, but all the time is now spent in expat, so further improvements
will require higher level changes.
Bug: skia:
Change-Id: I0dca67ee18652f6fb8647fe8706716d9a01f7cdf
Reviewed-on: https://skia-review.googlesource.com/155603
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
- Rename 'srgbnl' to just 'srgb'.
- Add 'narrow' and 'enarrow' for testing a gamut narrower than sRGB.
Tested by running xfermodes2 in DM... all look different, what a mess.
I also ran a few nanobenches and they seemed somewhat sane.
Change-Id: Iacdc391dc0eef4153a76f5b4f78d72c57a4371ee
Reviewed-on: https://skia-review.googlesource.com/135871
Commit-Queue: Mike Klein <mtklein@chromium.org>
Auto-Submit: Mike Klein <mtklein@chromium.org>
Reviewed-by: Brian Osman <brianosman@google.com>
Now that "srgb" is broken I don't want to accidentally run it.
"srgbnl" if of course identical, and not broken so much as
simply not yet working. :)
While here, simplify the configs we run in nanobench too, eliminating
565 and moving F16 to GCE-only (i.e. fast, abundant machines).
Similarly, remove "adobe" VIA that doesn't use Adobe RGB correctly...
Change-Id: Ic295dec97a2caadadbe8500655243db36dd2c43d
Reviewed-on: https://skia-review.googlesource.com/132932
Commit-Queue: Mike Klein <mtklein@chromium.org>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@chromium.org>
Reviewed-by: Brian Osman <brianosman@google.com>
PS5: Removes SkDestinationSurfaceColorMode, tracking of mipmap
mode on GrTexture, sRGB decode state per-texture. Because we
were often choosing sRGB configs for RGB color types, legacy
rendering would then be incorrect (too dark). So...
PS7: Stops ever using sRGB pixel configs when translating
image info or color type. Also removes a bunch of GrCaps bits
and a GrContextOption that are no longer relevant.
PS9: Adjusts surface creation unit test expectations, and
changes the raster rules accordingly.
At this point, sRGB configs are (obviously) going to be broken.
Locally, I ran 8888, gl, and the gbr- versions of both. Across
all GMs x configs, there are 13 diffs. 12 are GMs that create
surfaces with a color-space attached (and thus, the offscreen
is no longer getting sRGB pixel config). The only remainder
constructs an SkPictureImageGenerator, (with an attached color
space) and renders it to the gbr-gl canvas, which triggers a
a tagged surface inside the generator.
Bug: skia:
Change-Id: Ie5edfa157dd799f3121e8173fc4f97f6c8ed6789
Reviewed-on: https://skia-review.googlesource.com/131282
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Most of this is (obviously) not necessary to do, but once
I started, I figured I'd just get it all. Tools (nanobench,
DM, skiaserve), all GMs, benches, and unit tests, plus support
code (command line parsing and config stuff).
This is almost entirely mechanical.
Bug: skia:
Change-Id: I209500f8df8c5bd43f8298ff26440d1c4d7425fb
Reviewed-on: https://skia-review.googlesource.com/131153
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This wasn't being run (AFAICT) and was built on pre-skcms color management.
Change-Id: I506e8767f716bc6e4590ce255c5e40f1064fc152
Reviewed-on: https://skia-review.googlesource.com/129644
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Moves getCaps() from GrContext to GrContextPriv and removes unused refCaps().
Change-Id: Ic6a8951b656c0d1b2773eae73bff8e88af819866
Reviewed-on: https://skia-review.googlesource.com/127389
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
This reverts commit 97708e59ce.
Reason for revert: pain in the butt
Original change's description:
> allow timing in release-with-assert builds
>
> Change-Id: Ia85811bc113f951f3d7791371a5f97b49d156f70
> Reviewed-on: https://skia-review.googlesource.com/117368
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Mike Klein <mtklein@chromium.org>
TBR=mtklein@chromium.org,brianosman@google.com
Change-Id: I4282f5e887c7ec3198adde11a7300552644d22de
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/117441
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Change-Id: Ia85811bc113f951f3d7791371a5f97b49d156f70
Reviewed-on: https://skia-review.googlesource.com/117368
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Change-Id: I17a695c64be0e2081ad4937b23038b7ce88ae293
Reviewed-on: https://skia-review.googlesource.com/115988
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Hal Canary <halcanary@google.com>
This also adds GrGpu::create/deleteTestingOnlyBackendRenderTarget. Implemented in GL only for now.
Change-Id: I9e5fdc953c4a249959af89e08332f520cefe9d90
Reviewed-on: https://skia-review.googlesource.com/113305
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
A mechanical bulk move just to get these out of the public API.
TBR=bsalomon@google.com
Change-Id: I813efbd54a09dd448275697c0e50947753a5cfd3
Reviewed-on: https://skia-review.googlesource.com/112262
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
This reverts commit 3a2cc2c2ec.
Fix code with samplecnt=0 that slipped in between trybots/CQ and landing of previous version
Change-Id: Iab19f2e8d1e9901601c8c76244d7a88c5d707fab
Reviewed-on: https://skia-review.googlesource.com/103181
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 5bb82cbecd.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Revert "Revert "Revert "Revert "Redefine the meaning of sample counts in GPU backend.""""
>
> This reverts commit 18c52a7b52.
>
> Also relands "More sample count cleanup:" and "Add new GrContext queries for imagability, surfacability, and max sample count of color types"
>
>
> Bug: skia:
> Change-Id: I4028105a3a1f16ce3944e134619eb6245af6b947
> Reviewed-on: https://skia-review.googlesource.com/102940
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=egdaniel@google.com,bsalomon@google.com
Change-Id: Idee23be2f1719f0bdc9305043e95a2d589bee8d1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/103220
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 18c52a7b52.
Also relands "More sample count cleanup:" and "Add new GrContext queries for imagability, surfacability, and max sample count of color types"
Bug: skia:
Change-Id: I4028105a3a1f16ce3944e134619eb6245af6b947
Reviewed-on: https://skia-review.googlesource.com/102940
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit d0d7270fcc.
Revert "More sample count cleanup:"
This reverts commit d653cac70e.
Revert "Add new GrContext queries for imagability, surfacability, and max sample count of color types"
This reverts commit 85ae7159c9.
Need to understand NVPR perf changes before relanding
Change-Id: I0db075fb42438ef2a1f9885df184dce52892ac4b
Reviewed-on: https://skia-review.googlesource.com/102780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
rename getSampleCount -> getRenderTargetSampleCount because it will return
0 when a config is not renderable but *is* supported as a texture format.
(Old name kept around until Chrome stops calling it)
Add virtual GrCaps::maxRenderTargetSampleCount(GrPixelConfig).
Devirtualize isConfigRenderable() and implement as maxRTSC != 0. Separate implementation for version with bool withMSAA param to be removed after Flutter is updated to no longer call.
Consolidate various file static GrSurfaceDesc validators fns into GrCaps::validateSurfaceDesc().
Bug: skia:
Change-Id: Ie30a291aa027e910df3bd90fac8518ccdb39e53f
Reviewed-on: https://skia-review.googlesource.com/102141
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
This reverts commit 8005bff7e6.
Reason for revert: hwui, flutter, and headless blink in G3 all still using these.
Original change's description:
> hide picture virtuals (no public callers)
>
> This prepares the way for a clean impl of a "placeholder" picture that never unrolls
>
> Bug: skia:
> Change-Id: I3b5785c5c94432b54e9a7dc280b2a6e716592473
> Reviewed-on: https://skia-review.googlesource.com/100260
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Mike Klein <mtklein@chromium.org>
TBR=mtklein@chromium.org,mtklein@google.com,reed@google.com
Change-Id: I385789dd420588ea9a9390c8a44c6ecb96c7f358
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/100880
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This prepares the way for a clean impl of a "placeholder" picture that never unrolls
Bug: skia:
Change-Id: I3b5785c5c94432b54e9a7dc280b2a6e716592473
Reviewed-on: https://skia-review.googlesource.com/100260
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Bug: skia:
Change-Id: I38736c5d49e3b281c2d23af3908575274ff97b5c
Reviewed-on: https://skia-review.googlesource.com/86282
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
It throttles 1000x more than intended, and I suspect that some of the
trip points it uses to decide when to throttle make no sense. We've
already turned it off on the Nexus 5x.
Change-Id: Idf556a83fe61ccc5f63c7bede3eecbe80087e28b
Reviewed-on: https://skia-review.googlesource.com/81303
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Piece of the larger effort to merge readbuffer and validatingreadbuffer
Bug: skia:
Change-Id: I79305e27c4712c3b91d213d09d6c2ef24b86e671
Reviewed-on: https://skia-review.googlesource.com/81120
Commit-Queue: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Change-Id: I871dd5eea4496e87c206b46d9eae81cb521b11ce
Reviewed-on: https://skia-review.googlesource.com/65103
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Adds the flag and a disables caching on the CCPR bots.
Bug: skia:
Change-Id: Icb85e77f89634dda1d419dacac5b8a93340723f0
Reviewed-on: https://skia-review.googlesource.com/59740
Reviewed-by: Eric Boren <borenet@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Allows benchmarks to override GrContextOptions.
Removes the ability to use the same GrContext for all benchmarks in a config.
Change-Id: I5ab9f6e81055451ac912a66537843d1a49f3b479
Reviewed-on: https://skia-review.googlesource.com/34080
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
On ANGLE, at least, this frame gives us much more consistent results.
Bug: skia:
Change-Id: Ifdecc8451ef51490c08057645214738180b1a366
Reviewed-on: https://skia-review.googlesource.com/57884
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Move the check for kFailedLoops above code that times the benchmark.
This matches the comment ("Can't be timed") and prevents an infinite
loop.
Bug: skia:6774
Change-Id: Iacdc1ca1d11afcf05afac60e4eb0d8d9a12f800e
Reviewed-on: https://skia-review.googlesource.com/53803
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
This reverts commit 88757dacd4.
Reason for revert: Still seems to be failing Chromium "telemetry_perf_unittests (with patch) on Android" on android_n5x_swarming_rel.
Original change's description:
> guard old apis for querying byte-size of a bitmap/imageinfo/pixmap
>
> Now with legacy behavior for allocpixels
>
> This was reverted, so the current CL is a "fix" on top of ...
> https://skia-review.googlesource.com/c/skia/+/50980
>
> Related update to Chrome (in preparation for this change)
> https://chromium-review.googlesource.com/c/chromium/src/+/685719
>
> Bug: skia:
> Change-Id: I4b370ee7e95083ab27421f008132219c9c7b86e9
> Reviewed-on: https://skia-review.googlesource.com/51341
> Reviewed-by: Florin Malita <fmalita@chromium.org>
> Commit-Queue: Mike Reed <reed@google.com>
TBR=fmalita@chromium.org,reed@google.com
Change-Id: I827a0ca1d1e3909e648fde3342cdb8601d34da8d
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/52381
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
This reverts commit 98a6216b18.
Reason for revert: breaking the chrome roll. Looks like they may be writing data to create an image across all the row bytes and thus writing to unalloced data on the last row. Link to example failing bot:
https://build.chromium.org/p/tryserver.chromium.win/builders/win_chromium_rel_ng/builds/539960
Original change's description:
> guard old apis for querying byte-size of a bitmap/imageinfo/pixmap
>
> Previously we had size_t and uint64_t variations.
>
> The new (simpler) API always..
> - returns size_t, or 0 if the calculation overflowed
> - returns the trimmed size (does not include rowBytes padding for the last row)
>
> Bug: skia:
> Change-Id: I05173e877918327c7b207d2f7f1ab0db36892e2e
> Reviewed-on: https://skia-review.googlesource.com/50980
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Florin Malita <fmalita@chromium.org>
> Reviewed-by: Leon Scroggins <scroggo@google.com>
TBR=mtklein@google.com,herb@google.com,scroggo@google.com,fmalita@chromium.org,reed@google.com
Change-Id: I726f6ab1b36b14979ba6f37105e0a469b3f0dbc0
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/51262
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Previously we had size_t and uint64_t variations.
The new (simpler) API always..
- returns size_t, or 0 if the calculation overflowed
- returns the trimmed size (does not include rowBytes padding for the last row)
Bug: skia:
Change-Id: I05173e877918327c7b207d2f7f1ab0db36892e2e
Reviewed-on: https://skia-review.googlesource.com/50980
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Otherwise, the first few benches' measurements will be inaccurate.
For example, without this CL, the first few measurements are:
337ns, 566µs, 1000µs, ... without "--ms 1000" arg
211ns, 285µs, 874µs, ... with "--ms 1000" arg
With this CL, the first few measurements are:
195ns, 296µs, 1.03ms, ... without "--ms 1000" arg
204ns, 280µs, 859µs, ... with "--ms 1000" arg
In the example above, the first two measurements are vastly (>50%)
different without this CL. I think that's the reason why I keep
using "--ms 1000" arg locally. But it's really only necessary for
the first bench to warm up nanobench. It's a waste to apply
"--ms 1000" to all the following benches.
Bug: skia:
Change-Id: I1924ba3ff9185ed89aeda72794fafd1fe6625eef
Reviewed-on: https://skia-review.googlesource.com/49742
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Bug: skia:
Change-Id: Ic4073aa17a04e8b400cc4a9db9a0669ee4a5c894
Reviewed-on: https://skia-review.googlesource.com/44203
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
These are transient, so need to be copied.
Bug: skia:
Change-Id: Id24db0b96f343ecd034dd015da6e19ea61579b56
Reviewed-on: https://skia-review.googlesource.com/41741
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Also add new paragraph about using systrace correctly
Docs-Preview: https://skia.org/?cl=41502
Change-Id: I114c14cc2e87a8b72aec46d8c354d3ea877a41ab
Reviewed-on: https://skia-review.googlesource.com/41502
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Re-land of: https://skia-review.googlesource.com/36560
All information needed by the thread is captured by the prepare
callback object, the lambda captures a pointer to that, and does the
mask render. Once it's done, it signals the semaphore (also owned by the
callback). The callback defers the semaphore wait even longer (into the
ASAP upload), so the odds of waiting for the thread are REALLY low.
Also did a bunch of cleanup along the way, and put in some trace markers
so we can monitor how well this is working.
Traces of a GM that includes GPU and SW path rendering (path-reverse):
Original:
https://screenshot.googleplex.com/f5BG3901tQg.png
Threaded, with wait in the callback (notice pre flush callback blocking):
https://screenshot.googleplex.com/htOSZFE2s04.png
Current version, with wait deferred to ASAP upload function:
https://screenshot.googleplex.com/GHjD0U3C34q.png
Bug: skia:
Change-Id: Idb92f385590749f41328a9aec65b2a93f4775079
Reviewed-on: https://skia-review.googlesource.com/40775
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Motivated by wanting to speed-up A8 blits in general (and at the moment, aarect blits). More to come in these areas.
Bug: skia:
Change-Id: I45e8ef951b8e89a825af72b1918049be10920137
Reviewed-on: https://skia-review.googlesource.com/39401
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit 76323bc061.
Reason for revert: Breaking NUC bots in threaded gm comparison:
https://chromium-swarm.appspot.com/task?id=382e589753187f10&refresh=10
Original change's description:
> Threaded generation of software paths
>
> All information needed by the thread is captured by the prepare
> callback object, the lambda captures a pointer to that, and does the
> mask render. Once it's done, it signals the semaphore (also owned by the
> callback). The callback defers the semaphore wait even longer (into the
> ASAP upload), so the odds of waiting for the thread are REALLY low.
>
> Also did a bunch of cleanup along the way, and put in some trace markers
> so we can monitor how well this is working.
>
> Traces of a GM that includes GPU and SW path rendering (path-reverse):
>
> Original:
> https://screenshot.googleplex.com/f5BG3901tQg.png
> Threaded, with wait in the callback (notice pre flush callback blocking):
> https://screenshot.googleplex.com/htOSZFE2s04.png
> Current version, with wait deferred to ASAP upload function:
> https://screenshot.googleplex.com/GHjD0U3C34q.png
>
> Bug: skia:
> Change-Id: I3d5a230bbd68eb35e1f0574b308485c691435790
> Reviewed-on: https://skia-review.googlesource.com/36560
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=egdaniel@google.com,mtklein@google.com,bsalomon@google.com,robertphillips@google.com,brianosman@google.com
Change-Id: Icac0918a3771859f671b69ae07ae0fedd3ebb3db
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/38560
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
All information needed by the thread is captured by the prepare
callback object, the lambda captures a pointer to that, and does the
mask render. Once it's done, it signals the semaphore (also owned by the
callback). The callback defers the semaphore wait even longer (into the
ASAP upload), so the odds of waiting for the thread are REALLY low.
Also did a bunch of cleanup along the way, and put in some trace markers
so we can monitor how well this is working.
Traces of a GM that includes GPU and SW path rendering (path-reverse):
Original:
https://screenshot.googleplex.com/f5BG3901tQg.png
Threaded, with wait in the callback (notice pre flush callback blocking):
https://screenshot.googleplex.com/htOSZFE2s04.png
Current version, with wait deferred to ASAP upload function:
https://screenshot.googleplex.com/GHjD0U3C34q.png
Bug: skia:
Change-Id: I3d5a230bbd68eb35e1f0574b308485c691435790
Reviewed-on: https://skia-review.googlesource.com/36560
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Adjust the configs specified by recipes to avoid the new error.
Change-Id: I23e31355e2faaab919d92abdb37a6f70cd2da1ff
Reviewed-on: https://skia-review.googlesource.com/32862
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
DAA is:
1. Much simpler than AAA.
SkScan_AAAPath.cpp is about 1700 lines.
SkScan_DAAPath.cpp is about 300 lines.
The whole DAA CL is only about 800 lines.
2. Much faster than AAA for complicated paths.
The speedup applies to GL backend (including ccpr)!
Here's the frame time of 'SampleApp --slide Chart' on macbook pro:
AAA-raster: 33ms
DAA-raster: 21ms
AAA-gl: 30ms
DAA-gl: 20ms
AAA-ccpr: 18ms
DAA-ccpr: 12ms
My linux desktop doesn't have SSE3 so the speedup is smaller
(~25% for Chart). I believe that DAA is so fast that I can enable
it for any paths (AAA is not enabled by default for complicated
paths because it is slow; hence our older supersampling scan
converter is used for stroking on Chart for AAA-xxx config.)
3. The SkCoverageDelta is suitable for threaded backend with
out-of-order concurrent scan conversion as commented in the source
code. Maybe we can also just send deltas to GPU.
4. Similar to most analytic path renderers, the quality is on the best
ground-truth level, unless there are intersections within a pixel.
The intersections look good to my eyes although theoretically that
could be arbitrary far from the ground truth (see my AAA slides).
5. For simple paths, such as circle, triangle, rrect, etc., DAA is
slower than AAA. But DAA is faster than our older supersampling
scan converter in most cases. As those simple paths usually don't
constitute the bottleneck of a picture (skp or svg), I strongly
recommend use DAA.
6. DAA also heavily favors blitMask so it may work quite well with
SkRasterPipeline and SkRasterPipelineBlitter.
Finally, please check https://skia-review.googlesource.com/c/22420/
which accelerate DAA by specializing blitCoverageDeltas for
SkARGB32_Blitter and SkARGB32_Black_Blitter. It brings a little(<5%)
speedup. But I couldn't figure out how to reduce the duplicate code
so I don't intend to land it.
Bug: skia:
Change-Id: I3b7ed6a727447922e645b1acb737a506e7c09a4c
Reviewed-on: https://skia-review.googlesource.com/19666
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Cary Clark <caryclark@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Will need guards for android (at least)
Bug: skia:
Change-Id: I2bb8e656997984489ef1f2e41cd3d301c4e7b947
Reviewed-on: https://skia-review.googlesource.com/26040
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Bug: skia:
Change-Id: I401c5a9885c348aa424ab07b094acecddb209490
Reviewed-on: https://skia-review.googlesource.com/25860
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Not yet thread safe (so it forces threading off).
Builds JSON on the fly, so overhead is certainly bad.
Plan to fix all of that, but this at least "works".
There is now one tracing flag: 'trace'.
- 'debugf' installs the SkDebugf tracer.
- 'atrace' installs the Android ATrace tracer.
- Any other value is interpreted as a filename, and
produces a JSON file for chrome://tracing.
All three modes work in DM, nanobench, and Viewer.
Bug: skia:
Change-Id: I3fbc22382b99418a508c670be2770195c0a1c364
Reviewed-on: https://skia-review.googlesource.com/24781
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Instead of query and maxSampleCount and using that to cap, we now have
each config store its supported values and when requested returns either
the next highest or equal supported value, or if non the max config supported.
Bug: skia:
Change-Id: I8802d44c13b3b1703ee54a7e69b82102d4b8dc2d
Reviewed-on: https://skia-review.googlesource.com/24302
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Also adds more trace events to GPU backend.
Change-Id: Ifa5f0cd4b1fd582f0cc30d37d9e6414dc498c75d
Reviewed-on: https://skia-review.googlesource.com/24622
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 742a3e298f.
Reason for revert: Breaking Android roll:
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp:453:18: error: no member named 'fColorPtr' in 'SkAndroidCodec::AndroidOptions'
codecOptions.fColorPtr = colorPtr;
~~~~~~~~~~~~ ^
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp:454:18: error: no member named 'fColorCount' in 'SkAndroidCodec::AndroidOptions'
codecOptions.fColorCount = colorCount;
~~~~~~~~~~~~ ^
Original change's description:
> Remove support for decoding to kIndex_8
>
> Fix up callsites, and remove tests that no longer make sense.
>
> Bug: skia:6828
> Change-Id: I2548c4b7528b7b1be7412563156f27b52c9d4295
> Reviewed-on: https://skia-review.googlesource.com/21664
> Reviewed-by: Derek Sollenberger <djsollen@google.com>
> Commit-Queue: Leon Scroggins <scroggo@google.com>
TBR=djsollen@google.com,scroggo@google.com
Change-Id: I1bc669441f250690884e75a9a61427fdf75c6907
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:6828
Reviewed-on: https://skia-review.googlesource.com/22120
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Fix up callsites, and remove tests that no longer make sense.
Bug: skia:6828
Change-Id: I2548c4b7528b7b1be7412563156f27b52c9d4295
Reviewed-on: https://skia-review.googlesource.com/21664
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
This makes it trivial to copy/paste into spreadsheets for sorting/diffing
Bug: skia:
Change-Id: I02c920e2b8be8f59270da9fb9bb3e6763987e0bc
Reviewed-on: https://skia-review.googlesource.com/21378
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Adds a bitfield to GrContextOptions that masks out path renderers.
Adds commandline flags support to set this bitfield in tools apps.
Removes GrGLInterfaceRemoveNVPR since we can now accomplish the same
thing in the context options.
BUG=skia:
Change-Id: Icf2a4df36374b3ba2f69ebf0db56e8aedd6cf65f
Reviewed-on: https://skia-review.googlesource.com/8786
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Also changes the behavior of these flags to only override their
corresponding context options when set, and to leave them unchanged
when not set.
BUG=skia:
Change-Id: I09f6be09997594fa888d9045dd4901354ef3f880
Reviewed-on: https://skia-review.googlesource.com/8780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
BUG=skia:
Change-Id: I01c5e1874c9a034febc64e25b3aaafb5050393a6
Reviewed-on: https://skia-review.googlesource.com/8021
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
The weird foo_mains are no longer needed when we build with GN.
CQ_INCLUDE_TRYBOTS=skia.primary:Build-Mac-Clang-arm-Debug-iOS
Change-Id: Iae50696741e0dc277d96dda4968a1ae41cb17c8a
Reviewed-on: https://skia-review.googlesource.com/8064
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Stephan Altmueller <stephana@google.com>
CQ_INCLUDE_TRYBOTS=skia.primary:Test-iOS-Clang-iPadMini4-GPU-GX6450-arm-Release
Change-Id: I7beadad742bc9444491c7a315a827297a636d70d
Reviewed-on: https://skia-review.googlesource.com/8049
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Just like DM.
CQ_INCLUDE_TRYBOTS=skia.primary:Test-iOS-Clang-iPadMini4-GPU-GX6450-Arm7-Debug,Build-Mac-Clang-arm64-Debug-GN_iOS
Change-Id: I4af3fa1813e3b7ee48407096e91373b5fee569c7
Reviewed-on: https://skia-review.googlesource.com/7824
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Generate targets for dm and nanobench from ninja and add them to the
generated Android.bp file.
Remove nanobenchAndroid and SkAndroidSDKCanvas. These rely on HWUI
internals and are currently unused.
Update gyp file references to removed files, just in case.
Change-Id: Ic6ae18a70bfd0c33804e7996d077f2081dfdfe07
Reviewed-on: https://skia-review.googlesource.com/7635
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Leon Scroggins <scroggo@google.com>
These may be better at -fsanitize=object-size.
No need to loop more than once in nanobench for these bots.
CQ_INCLUDE_TRYBOTS=skia.primary:Build-Ubuntu-Clang-x86_64-Release-ASAN,Perf-Ubuntu-Clang-GCE-CPU-AVX2-x86_64-Release-ASAN,Perf-Ubuntu-Clang-Golo-GPU-GT610-x86_64-Release-ASAN,Test-Ubuntu-Clang-GCE-CPU-AVX2-x86_64-Release-ASAN,Test-Ubuntu-Clang-Golo-GPU-GT610-x86_64-Release-ASAN
Change-Id: If89e94390d473434717cfe28de6be9055b68d8d4
Reviewed-on: https://skia-review.googlesource.com/7278
Reviewed-by: Herb Derby <herb@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
The only difference is that we now also put the guard flag
SK_SUPPORT_LEGACY_AAA in SkUserConfig.h. Previously, SkAnalyticEdge.cpp doesn't
get that flag from SkScan.h and that caused many problems.
BUG=skia:
TBR=reed@google.com,caryclark@google.com
Change-Id: I134bb76cebd6fffa712f438076668765321bba3b
Reviewed-on: https://skia-review.googlesource.com/6992
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
This reverts commit b46fff60bc.
Reason for revert: possible chromium cc unit tests failure
Change-Id: Ie174c55e4d0fc3ae45854b5897ba26b7ad5a9c13
Reviewed-on: https://skia-review.googlesource.com/6981
Commit-Queue: Yuqian Li <liyuqian@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
The only difference is that we now put the guard flag SK_SUPPORT_LEGACY_AAA in
SkUserConfig.h instead of SkScan.h. Previously, SkAnalyticEdge.cpp doesn't get
that flag from SkScan.h and that caused many problems.
BUG=skia:
TBR=reed@google.com,caryclark@google.com
Change-Id: I7b89d3cb64ad71715101d2a5e8e77be3a8a6fa16
Reviewed-on: https://skia-review.googlesource.com/6972
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
This reverts commit 89a0e72287.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Implement Analytic AA for General Paths (with Guard against Chrome)
>
> I've set up a SK_SUPPORT_LEGACY_AAA flag to guard against Chromium layout tests. I also set that flag in this CL so theoretically this CL won't trigger any GM changes. I'll use this to verify my guard, and remove that flag and actually enables concave AAA in a future CL.
>
> When enabled, for most simple concave paths (e.g., rectangle stroke, rrect stroke, sawtooth, stars...), the Analytic AA achieves 1.3x-2x speedup, and they look much prettier. And they probably are the majority in our use cases by number. But they probably are not the majority by time cost; a single complicated path may cost 10x-100x more time to render than a rectangle stroke... For those complicated paths, we fall back to supersampling by default as we're likely to be 1.1-1.2x slower and the quality improvement is not visually significant. However, one can use gSkForceAnalyticAA to disable that fallback.
>
> BUG=skia:
>
> Change-Id: If9549a3acc4a187cfaf7eb51890c148da3083d31
> Reviewed-on: https://skia-review.googlesource.com/6091
> Reviewed-by: Mike Reed <reed@google.com>
> Commit-Queue: Yuqian Li <liyuqian@google.com>
>
TBR=caryclark@google.com,liyuqian@google.com,reed@google.com
BUG=skia:
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: I13c05aaa1bcb14956bd0fe01bb404e41be75af22
Reviewed-on: https://skia-review.googlesource.com/6961
Commit-Queue: Yuqian Li <liyuqian@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
I've set up a SK_SUPPORT_LEGACY_AAA flag to guard against Chromium layout tests. I also set that flag in this CL so theoretically this CL won't trigger any GM changes. I'll use this to verify my guard, and remove that flag and actually enables concave AAA in a future CL.
When enabled, for most simple concave paths (e.g., rectangle stroke, rrect stroke, sawtooth, stars...), the Analytic AA achieves 1.3x-2x speedup, and they look much prettier. And they probably are the majority in our use cases by number. But they probably are not the majority by time cost; a single complicated path may cost 10x-100x more time to render than a rectangle stroke... For those complicated paths, we fall back to supersampling by default as we're likely to be 1.1-1.2x slower and the quality improvement is not visually significant. However, one can use gSkForceAnalyticAA to disable that fallback.
BUG=skia:
Change-Id: If9549a3acc4a187cfaf7eb51890c148da3083d31
Reviewed-on: https://skia-review.googlesource.com/6091
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
* SkAutoFree moved to SkTemplates.h (now implmented with unique_ptr).
* SkAutoMalloc and SkAutoSMalloc moved to SkAutoMalloc.h
* "SkAutoFree X(sk_malloc_throw(N));" --> "SkAutoMalloc X(N);"
Revert "Revert 'SkTypes.h : move SkAutoMalloc into SkAutoMalloc.h'"
This reverts commit c456b73fef.
Change-Id: Ie2c1a17c20134b8ceab85a68b3ae3e61c24fbaab
Reviewed-on: https://skia-review.googlesource.com/6886
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
* SkAutoFree moved to SkTemplates.h (now implmented with unique_ptr).
* SkAutoMalloc and SkAutoSMalloc moved to SkAutoMalloc.h
* "SkAutoFree X(sk_malloc_throw(N));" --> "SkAutoMalloc X(N);"
Change-Id: Idacd86ca09e22bf092422228599ae0d9bedded88
Reviewed-on: https://skia-review.googlesource.com/4543
Reviewed-by: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
This patch adds per-benchmark-iteration times to our JSON output. Given that we
already collect these statistics, giving them to the user would be nice.
No unit-test provided, since `rgrep -i json tests` yielded nothing. Happy to add
one if someone wants.
BUG=None.
TEST=nanobench now writes per-run timinings with the output JSON.
Change-Id: I910f1d97fd3e0ee69fc8e78e011e67b9c866f18d
Reviewed-on: https://skia-review.googlesource.com/5617
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Ravi Mistry <rmistry@google.com>
Also, no more SkImageEncoder class.
SK_SUPPORT_LEGACY_IMAGE_ENCODER_CLASS now only guards some
old API shims.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=5006
Change-Id: I3797f584f3e8e12ade10d31e8733163453725f40
Reviewed-on: https://skia-review.googlesource.com/5006
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Reed <reed@google.com>
(re-land 248ff02 & 2cb6cb7, with changes)
- Hide SkImageEncoder class in private header.
- SkImageEncoder::Type becomes SkEncodedImageFormat
- SkEncodedFormat becomes SkEncodedImageFormat
- SkImageEncoder static functions replaced with
single function EncodeImage()
- utility wrappers for EncodeImage() are in
sk_tool_utils.h
TODO: remove link-time registration mechanism.
TODO: clean up clients use of API and flip the flag.
TODO: implement EncodeImage() in chromeium/skia/ext
Change-Id: I47d451e50be4d5c6c130869c7fa7c2857243d9f0
Reviewed-on: https://skia-review.googlesource.com/4909
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-on: https://skia-review.googlesource.com/5186
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Hal Canary <halcanary@google.com>
- Hide SkImageEncoder class in private header.
- SkImageEncoder::Type becomes SkEncodedImageFormat
- SkEncodedFormat becomes SkEncodedImageFormat
- SkImageEncoder static functions replaced with
single function EncodeImage()
- utility wrappers for EncodeImage() are in
sk_tool_utils.h
TODO: remove link-time registration mechanism.
TODO: clean up clients use of API and flip the flag.
TODO: implement EncodeImage() in chromeium/skia/ext
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4909
Change-Id: Ib48b31fdc05cf23cda7f56ebfd67c841c149ce70
Reviewed-on: https://skia-review.googlesource.com/4909
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
It is moved to src/utils. It is almost a tool, but has two uses in
src/ports.
The existing SkOSFile.cpp is left empty for the time being since it is
mentioned in Chromium's BUILD.gn for Skia.
Change-Id: I3bb7f7c4214359eb6ab906bfe76737d20bf1d6c7
Reviewed-on: https://skia-review.googlesource.com/4536
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Ben Wagner <bungeman@google.com>
Replace with std::unique_ptr.
Change-Id: I5806cfbb30515fcb20e5e66ce13fb5f3b8728176
Reviewed-on: https://skia-review.googlesource.com/4381
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Matches our naming convention for all other types - factories that
return sk_sp (or any type that intelligently manages its own
lifetime) are named Make.
Previous factories are still around, assuming
SK_SUPPORT_LEGACY_COLOR_SPACE_FACTORIES is defined. Enable that
define for Android, etc.
See also: https://codereview.chromium.org/2442053002/
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3822
Change-Id: Iaea9376490736b494e8ffc820831f052bbe1478d
Reviewed-on: https://skia-review.googlesource.com/3822
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
It will now reside in SkColorSpace_Base. Future work for SkColorSpace
will cause this function to not be desirable or sensible to call on
all SkColorSpaces. Call sites were changed to make a kSRGBLinear_Named
instead of kSRGB_Named -> makeLinearGamma() (the majority of cases),
and if that was not possible, SkColorSpace_Base::makeLinearGamma()
was called instead.
TBR=reed@google.com
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2412613005
Review-Url: https://codereview.chromium.org/2412613005
I also had to cut it down to just a global atomic bool... as a field in a global singleton accessed through instance(), it's very hard to make threadsafe.
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Ubuntu-Clang-GCE-CPU-AVX2-x86_64-Release-TSAN-Trybot
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2937
Change-Id: If80be987906dd521fbe644d1d0d577009f06d0e3
Reviewed-on: https://skia-review.googlesource.com/2937
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
The SkFontData type is not exposed externally, so any method which uses
it can be updated to use smart pointers without affecting external
users. Updating this first will make updating the public API much
easier.
This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
appears that no one outside Skia is currently using SkStream::NewfromFile
so this is a good time to update it as well.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
Committed: https://skia.googlesource.com/skia/+/d8c2476a8b1e1e1a1771b17e8dd4db8645914f8c
Review-Url: https://codereview.chromium.org/2339273002
Reason for revert:
Killing Mac
Original issue's description:
> SkFontData to use smart pointers.
>
> The SkFontData type is not exposed externally, so any method which uses
> it can be updated to use smart pointers without affecting external
> users. Updating this first will make updating the public API much
> easier.
>
> This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
> std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
> appears that no one outside Skia is currently using SkStream::NewfromFile
> so this is a good time to update it as well.
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
>
> Committed: https://skia.googlesource.com/skia/+/d8c2476a8b1e1e1a1771b17e8dd4db8645914f8cTBR=mtklein@chromium.org,halcanary@google.com,mtklein@google.com,reed@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/2343933002
The SkFontData type is not exposed externally, so any method which uses
it can be updated to use smart pointers without affecting external
users. Updating this first will make updating the public API much
easier.
This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
appears that no one outside Skia is currently using SkStream::NewfromFile
so this is a good time to update it as well.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
Review-Url: https://codereview.chromium.org/2339273002
Verify the rules that we're converging on for surfaces:
- For 8888, we only support sRGB-like gamma, or no color space at all.
- For F16, we require a color space, with linear gamma.
- For all other formats, we do not support color spaces.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2270823002
Review-Url: https://codereview.chromium.org/2270823002
$ git grep -l '<windows.h>' include src
include/private/SkLeanWindows.h
$ git grep -l SkLeanWindows.h | grep '\.h$'
include/ports/SkTypeface_win.h
include/utils/win/SkHRESULT.h
include/utils/win/SkTScopedComPtr.h
include/views/SkEvent.h
src/core/SkMathPriv.h
src/ports/SkTypeface_win_dw.h
src/utils/SkThreadUtils_win.h
src/utils/win/SkWGL.h
The same for `#include <intrin.h>` that was found in SkMath.h.
Those functions that needed it are moved to SkMathPriv.h.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2041943002
CQ_INCLUDE_TRYBOTS=tryserver.chromium.win:win_chromium_compile_dbg_ng,win_chromium_compile_rel_ng
Review-Url: https://codereview.chromium.org/2041943002
The C++ standard library uses the name "release" for the operation we call "detach".
Rewriting each "detach(" to "release(" brings us a step closer to using standard library types directly (e.g. std::unique_ptr instead of SkAutoTDelete).
This was a fairly blind transformation. There may have been unintentional conversions in here, but it's probably for the best to have everything uniformly say "release".
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1809733002
Review URL: https://codereview.chromium.org/1809733002
