This breaks Sinks down into three auto-detected types:
- GPU: anything that requests to be run in the GPU enclave
- Vector: anything that writes to the stream instead of the bitmap
- Raster: everything else
Some examples: gpu -> GPU, msaa16 -> GPU, 8888 -> raster, pdf -> vector,
svg -> vector, pipe-8888 -> raster, tiles_rt-gpu -> GPU
This lets image decoding sinks veto non-raster backends explicitly,
and can let particular GMs veto GPU or non-GPU sinks as they like.
BUG=skia:
Review URL: https://codereview.chromium.org/1239953004
This allows codecs that support subsets natively (i.e. WEBP) to do so.
Add a field on SkCodec::Options representing the subset.
Add a method on SkCodec to find a valid subset which approximately
matches a desired subset.
Implement subset decodes in SkWebpCodec.
Add a test in DM for decoding subsets.
Notice that we only start on even boundaries. This is due to the
way libwebp's API works. SkWEBPImageDecoder does not take this into
account, which results in visual artifacts.
FIXME: Subsets with scaling are not pixel identical, but close. (This
may be fine, though - they are not perceptually different. We'll just
need to mark another set of images in gold as valid, once
https://skbug.com/4038 is fixed, so we can tests scaled webp without
generating new images on each run.)
Review URL: https://codereview.chromium.org/1240143002
Scaling webp ends triggers warnings on our valgrind bot. It also results in
generating many images in Skia Gold that look mostly the same except
for a few pixels along the right edge.
BUG=skia:4038
Review URL: https://codereview.chromium.org/1227843005
Make getScanlineDecoder return a new object each time, which is
owned by the caller, and independent from any existing scanline
decoders and the SkCodec itself.
Since the SkCodec already contains the entire state machine, and it
is used by the scanline decoders, simply create a new SkCodec which
is now owned by the scanline decoder.
Move code that cleans up after using a scanline decoder into its
destructor
One side effect is that creating the first scanline decoder requires
a duplication of the stream and re-reading the header. (With some
more complexity/changes, we could pass the state machine to the
scanline decoder and make the SkCodec recreate its own state machine
instead.) The typical client of the scanline decoder (region decoder)
uses an SkMemoryStream, so the duplication is cheap, although we
should consider the extra time to reread the header/recreate the state
machine. (If/when we use the scanline decoder for other purposes,
where the stream may not be cheaply duplicated, we should consider
passing the state machine.)
One (intended) result of this change is that a client can create a
new scanline decoder in a new thread, and decode different pieces of
the image simultaneously.
In SkPngCodec::decodePalette, use fBitDepth rather than a parameter.
Review URL: https://codereview.chromium.org/1230033004
SkImageGenerator makes some assumptions that are not necessarily valid
for SkCodec. For example, SkCodec does not assume that it can always be
rewound.
We also have an ongoing question of what an SkCodec should report as
its default settings (i.e. the return from getInfo). It makes sense for
an SkCodec to report that its pixels are unpremultiplied, if that is
the case for the underlying data, but if a client of SkImageGenerator
uses the default settings (as many do), they will receive
unpremultiplied pixels which cannot (currently) be drawn with Skia. We
may ultimately decide to revisit SkCodec reporting an SkImageInfo, but
I have left it unchanged for now.
Import features of SkImageGenerator used by SkCodec into SkCodec.
I have left SkImageGenerator unchanged for now, but it no longer needs
Result or Options. This will require changes to Chromium.
Manually handle the lifetime of fScanlineDecoder, so SkScanlineDecoder.h
can include SkCodec.h (where Result is), and SkCodec.h does not need
to include it (to delete fScanlineDecoder).
In many places, make the following simple changes:
- Now include SkScanlineDecoder.h, which is no longer included by
SkCodec.h
- Use the enums in SkCodec, rather than SkImageGenerator
- Stop including SkImageGenerator.h where no longer needed
Review URL: https://codereview.chromium.org/1220733013
We name our .pngs by pixel hashes for gold. For 8888 images, we're hashing
SkPMColors, which have platform-dependent order: BGRA on Linux and Windows,
RGBA otherwise. This means we can end up with pixel-identical pngs with
different hashes, which is confusing.
This CL standardizes on RGBA for 8888 configs, arbitrarily chosen so that
Android ends up a no-op. Long-term, this should eliminate most of the
0-pixel-diff problems we see on gold.skia.org. There are other ways to end up
with the same .png from different SkBitmaps (think, red 565 square vs. red 8888
square) but they're rather less common / likely.
This will temporarily create a giant 0-pixel-diff problem on gold.skia.org.
Any Linux or Windows images which are not already pixel-identical to a Mac or
Android image should show up as untriaged hashes that are pixel-identical to
their version just before landing (we're only changing the hash, not the .png).
This means anything vaguely platform dependent (fonts, GPUs) will probably show
up as needing a triage but with a zero diff from a previous image.
If this goes well, we might do the same for 565. Just want to leave them out
for now to cut down on the triaging I need to do in one go.
BUG=skia:
Review URL: https://codereview.chromium.org/1226933005
Mangle external function names to avoid conflict with libjpeg
Take advantage of direct color conversion (RGBA, BGRA, 565)
Prepare to use jpeg_skip_scanlines (when it is upstreamed)
BUG=skia:
Review URL: https://codereview.chromium.org/1180983002
Based on SkImageDecoder_libwebp.
TODO:
Support YUV? (Longer term - may influence our API for SkImageGenerator)
BUG=skia:3257
Review URL: https://codereview.chromium.org/1044433002
I originally thought that there was no harm in reading or skipping
zero lines after we have already reached the end of the image.
However, once we reach the end of the image, onFinish() is
automatically called. Performing a read or a skip after
the call to onFinish() is invalid and will cause onFinish()
to be called a second time (which is also invalid).
Seems like the code requires good behavior and the test is
wrong.
BUG=skia:
Review URL: https://codereview.chromium.org/1179213002
This experiment replaces the label used in the aaxfermodes gm with
aliased text generated from paths common to all platforms.
Since there is no way today to generate all dm output from trybots,
this will be checked in to confirm that this strategy provides simpler
output across devices.
This does not introduce a new public interface; instead, dm uses
a extern backdoor to install the SkTypeface::CreateFromName
handler.
Review URL: https://codereview.chromium.org/1163283002
kScanline_Subset_Mode decodes the image in subsets using a
scanline decoder.
The number of subsets can be specified by changing the constant divisor.
The number of subsets is equal to divisor*divisor.
Review URL: https://codereview.chromium.org/1157153003
Previously it was hard to tell that DrawFn took an SkCanvas* and returned an Error. Now it's clear from the type.
BUG=skia:
Review URL: https://codereview.chromium.org/1125233002
If so, let's do it this way so it works for all source types and doesn't need
to be chosen at compile time.
BUG=skia:
Review URL: https://codereview.chromium.org/1129693003
Will use this to test the other CL that adds small SkPicture implementations.
Not quite sure why patch_primitive doesn't draw the same in 8888 and sp-8888, but everything else does, so I'm not going to let that hold me back for now.
BUG=skia:
Review URL: https://codereview.chromium.org/1126613005
This requires we remove NVPR from the default set of configs, as we only find
out at runtime that it's not available. All the other defaults will either be
compiled in and supported, or not compiled in and non-fatally skipped as
unknown configs.
BUG=skia:
Review URL: https://codereview.chromium.org/1100773003
Enables basic decoding for jpegs
Includes rewinding
565, YUV, and Jpeg encoding are not yet implemented
BUG=skia:3257
Review URL: https://codereview.chromium.org/1076923002
Motivation: I want to switch back to single-page output by default for
direct comparison to raster backends in Gold.
I can still test the multi-page option via a command-line switch.
BUG=skia:3721
Review URL: https://codereview.chromium.org/1063873004
We may want to enable swizzles to 565
for images that are encoded in a format
similar to 565, however, we do not want
to take images that decode naturally to
kN32 and then convert them to 565.
***Enable swizzles to kIndex_8. For images
encoded in a color table format, we suggest
that they be decoded to kIndex_8. When we
decode, we only allow conversion to kIndex_8
if it matches the suggested color type (except
wbmp which seems good as is).
***Modify dm to test images that decode to
kIndex_8.
BUG=skia:3257
BUG=skia:3440
Review URL: https://codereview.chromium.org/1055743003
