Add version SkImageInfo::Make() that takes SkISize instead of separate
width and height.
Change-Id: I42aa79d23b19e22f5405631728c245b04bce0559
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245172
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Give it its own header file.
Make it store SkISize rather than separate int w/h.
Change-Id: I732f2774c561decac743a950959a70cbc162b67b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245163
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
SkIota adds an index to some collection you already use:
std::vector<int> v;
for (auto t : SkMakeIota(v)) {
size_t i; int v;
std::tie(i, v) = t;
...
}
Change-Id: I18390fc084eb8509cfaeb50d9720541759a2986d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/225546
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
SkStrikeInterface has become more and more focused on support of the GPU
stack. Finishing this focus clears up some of the confusing parts of the
Bitmap code.
Remove use of SkStrikeInterface from the BitmapCode.
Change-Id: I18a50d3ec17d81fcbe55030a3a3ec7eeeba23497
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/244297
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
It would have been passing, note that he changes to SkRecorder are needed only to obtain the
SkRecord used in asseting the correct commands were recorded.
Bug: skia: 9462
Change-Id: Ic43ab400b5954cc4f6eb465168179c0204a66040
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/243818
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Nathaniel Nifong <nifong@google.com>
Bug: skia:
Change-Id: I1483cdf7229b7234be41d21407e2b4abf99fff76
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/239925
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Change-Id: I87b0fc76ef48c1a21498e576853a6c3b4a6a98f9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/242563
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Previously this clamping was inserted by the program builder.
Adds GrSaturateProcessor to handle saturating in the fragment shader.
Clamp the GrPaint color rather than using a fp when possible.
Has to be plumbed through GrTextureOp because that skips SkPaint
conversion.
Removes a usage of GrPixelConfig.
Bug: skia:6718
Change-Id: Ifa6544496d34677f17e797433e6ef3a97be5c2b2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/242558
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This is a reland of f3c4a829c6
Original change's description:
> SkZip - synchronized indexing of several pointers
>
> This is the mechanism for syncing a bunch of things with
> contiguous memory like vector<>, array<> and SkSpan<>.
>
> In a following CL, a convenience function SkMakeZip will
> easily convert most containers into a zip.
>
> Change-Id: Icda5b1774ae21c4c163a663f6d2b0f119f63ccba
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/240200
> Commit-Queue: Herb Derby <herb@google.com>
> Reviewed-by: Ben Wagner <bungeman@google.com>
Change-Id: I7d1a91a9c35dde721147bb3c1f23c9b3a8d59d04
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/242476
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
This reverts commit f3c4a829c6.
Reason for revert: std::get<T> is a c++14 std library call
Original change's description:
> SkZip - synchronized indexing of several pointers
>
> This is the mechanism for syncing a bunch of things with
> contiguous memory like vector<>, array<> and SkSpan<>.
>
> In a following CL, a convenience function SkMakeZip will
> easily convert most containers into a zip.
>
> Change-Id: Icda5b1774ae21c4c163a663f6d2b0f119f63ccba
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/240200
> Commit-Queue: Herb Derby <herb@google.com>
> Reviewed-by: Ben Wagner <bungeman@google.com>
TBR=bungeman@google.com,herb@google.com
Change-Id: Idc52b0552cd01b163357a45d43d9531e62694dda
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/242356
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Herb Derby <herb@google.com>
This is the mechanism for syncing a bunch of things with
contiguous memory like vector<>, array<> and SkSpan<>.
In a following CL, a convenience function SkMakeZip will
easily convert most containers into a zip.
Change-Id: Icda5b1774ae21c4c163a663f6d2b0f119f63ccba
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/240200
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
motivation: BUILD.gn os too big, also can be reused in modules.
Also: add a BUILD.gn for minimal_ios_mtl_skia_app that uses the
template.
CQ_INCLUDE_TRYBOTS=skia.primary:Build-Mac-Clang-arm64-Debug-iOS_Metal,Build-Mac-Clang-arm64-Release-iOS,Test-iOS-Clang-iPhone7-GPU-PowerVRGT7600-arm64-Debug-All-Metal,Test-iOS-Clang-iPhone6-GPU-PowerVRGX6450-arm64-Release-All
Change-Id: I70ebb9668cce51ea9fa671a3d8c93041fbedcbfa
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/241761
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Auto-Submit: Hal Canary <halcanary@google.com>
On Windows I'm getting:
curr/maxrss loops min median mean max stddev samples config bench
33/38 MB 1495 2.62us 2.65us 2.66us 2.72us 1% .o.o.oO.OO gl DDLRecorder
Change-Id: I529e6ac612c455915c166472124b08647eb7bffd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/241039
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Use managed staging buffers for texture uploads, uniforms and buffers.
Change-Id: I063707c160236725d27a1d1bfb197d3096a07b34
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/238120
Commit-Queue: Stephen White <senorblanco@chromium.org>
Reviewed-by: Greg Daniel <egdaniel@google.com>
The DrawDeviceWithFilter function used to rely on SkImageFilter's
applyCTMForBackdrop, which would create a new DAG and use an
SkMatrixImageFilter node to account for the transformation. However,
that filter is really meant to perform a transformation prior to the
CTM matrix. Abusing matrix math to instead have it map the backdrop
contents back into the CTM local space grossly inflated the size of the
temporary images needed when under many perspective transforms.
This CL instead takes over control of the CTM decomposition and draws
the backdrop (src) content into a temporary layer directly, and then
feeds that through the image filtering. The code is somewhat cumbersome
to follow because of the combination of coordinate spaces and need to
make everything relative to the top left corner of the images.
When the rest of my image filter refactor is more underway, I believe that
a lot of the coordinate space math and image origin accounting will
be much cleaner, but the overall backdrop filtering strategy would remain
similar to this new implementation.
Bug: skia:9074
Change-Id: Ibd2995e81d2b308c74b2d298da5e38daa74c8677
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/239108
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
This will allow us to reuse the "setRelativeTo" logic in more places
than GL.
Bug: skia:
Change-Id: Ic67b211d2a1b27535187ddae8e4771f595dc0397
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/239414
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This is a reland of bf8dad281e
Original change's description:
> Add launch screen to iOS apps
>
> Bug: skia:
> Change-Id: I7ebe94213c26c31c1b0dbd1b8951f87263cd41a3
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/175826
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
> Reviewed-by: Hal Canary <halcanary@google.com>
Bug: skia:
Change-Id: I111242899339186fba2b8753ee43bc0fb2ea5295
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/239437
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
This reverts commit bf8dad281e.
Reason for revert: Need to fix infra Housekeeper bot
Original change's description:
> Add launch screen to iOS apps
>
> Bug: skia:
> Change-Id: I7ebe94213c26c31c1b0dbd1b8951f87263cd41a3
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/175826
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
> Reviewed-by: Hal Canary <halcanary@google.com>
TBR=jvanverth@google.com,halcanary@google.com,benjaminwagner@google.com
Change-Id: Ie540cc4d3209cf5e92d4c66812243721b1ac7fc2
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/239105
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Bug: skia:
Change-Id: I7ebe94213c26c31c1b0dbd1b8951f87263cd41a3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/175826
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Hal Canary <halcanary@google.com>
motivation: put them all in one place.
Change-Id: Id40aff1f6ddc36b99b14567f110b5084da7e2bd4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/238899
Commit-Queue: Hal Canary <halcanary@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Auto-Submit: Hal Canary <halcanary@google.com>
GrResourceAllocator.
Removes LazyInstantiationType. All callbacks can be invoked one time (if successful).
Lazy callbacks indicate whether their lifetime should be extended, which is used by
promise image proxy callbacks.
Promise image proxies are no longer deinstantiated at the end of flush and
GrDeinstantiateProxyTracker is removed. They will be instantiated the first time
they are encountered in GrResourceAllocator::addInterval (without actually adding
an interval) and then remain instantiated.
Also removes some "helper" versions of proxy factory functions that took fewer
params. They weren't much used outside of test code and as the total number of params
has grown their relative utility has diminished. We could consider a params struct
or radically simpler helpers that take only a few params if desired.
Change-Id: Ic6b09e7b807b66cb9fcbb7a67ae0f9faf345485f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/238216
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
dsymutil seems to kill the machine when too many processes are run in
parallel, so we need to use a pool to limit the concurrency when
passing large -j to Ninja (e.g. Goma build).
Change-Id: I84404291db4781f86268256ab888cef8d07c770e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234477
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Auto-Submit: Ben Wagner aka dogben <benjaminwagner@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Change-Id: I18a3bd5e845305e3b2521d076fd641bd5175b618
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234327
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Auto-Submit: Ben Wagner aka dogben <benjaminwagner@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Change-Id: I81835ffdd1fbdaa12d662527e38b42532f2ea8e8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/238756
Commit-Queue: Hal Canary <halcanary@skia.org>
Reviewed-by: Brian Osman <brianosman@google.com>
Without the changes to GrShape and GrAAConvexPathRenderer, this new GM
would not draw the red circle at the center when using Ganesh. Raster
drew the red circle. The difference came about because they checked
convexity after transforming by the view matrix, and Ganesh checked
before.
With this particular path construction and the very large scale factor
on the CTM, the convexity calculator in local space computed small
enough edge vectors that it thought the contour backtracked on itself
instead of winding in a consistent direction.
The GrAAConvexPathRenderer would claim it could draw the convex path,
but later when actually preparing to draw, it would do nothing if it
turned out the convex path didn't have a direction. This CL updates it
so that the convex path renderer's canDraw() function matches what it
is actually able to draw.
There is the separate issue of the convexity/direction checking
precision.
Bug: chromium:996140
Change-Id: I6f2af2d9ba6752663d97c8573deb2d767a3f1245
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/238121
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Bug: skia:
Change-Id: I16073008ac852f1864bd1d2bd38087a5b661d05a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/232581
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
This replaces the SDL-based system and should allow Metal to work on iOS.
OpenGL and raster will render but there's no touch input yet.
Bug: skia:8737
Change-Id: I863accc47f0e1781192d567dbe54d1e321c3cd2e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/231561
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
GrFence is implemented by a single MTLSharedEvent where we increase the
value with each new invocation. GrSemaphore uses a MTLEvent (the
assumption here is that we are signaling and waiting on the same device)
with an associated value that defaults to 1. For generating a large
number of GrSemaphores at once it should be possible to use the same
MTLEvent but with different assigned values.
Bug: skia:8243
Change-Id: Ic7de2d9d295fbe51e67bc7c3c4354257cb0774d4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233416
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Change-Id: Ifbe4bcd40bcf316868d23c2edf73b2371c6cb312
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/237119
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Stephen White <senorblanco@chromium.org>
We've failed to get these bots to report where issues happen
any more finely than the name of the executable, which makes
them a real pain to fix when they go red.
We don't expect we'll be able to run cleanly in this mode for
long without bots enforcing it, so remove support from GN too.
Change-Id: Ie86f0cbf2f5f859ac2ddb869da7e5b8d31b33fa0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/237195
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
GrDawnGpu vends ring buffer slices out of a persistent (larger) buffer.
GrDawnProgramDataManager::setData() now returns a BindGroup containing
the (possibly new) UBO bindings, as well as the texture and sampler
bindings.
Change-Id: Id6694d6f44a815cfbffe4293779bf9bf558a2365
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235866
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Stephen White <senorblanco@chromium.org>
In a follow up CL I will be merging GrRenderTargetOpList and GrOpList
since we no longer have need for that separation.
Change-Id: I267ead3beeceaece504968ca69165c425d38f761
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/236337
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
This also means copies are no longer part of OpList or GpuCommandBuffer.
Change-Id: I234de2c93ca13e069d7e4423a3c8b292be2eb500
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235831
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
AFAICT these three remaining uses of GrPendingIOResource were just real-ref placeholders (i.e., they just added 1 pending read and then held on to the GrPendingIOResource until object destruction).
Change-Id: Iba6bb199477d846d079999f09794422e240c675a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235458
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
These Ops don't need to go through the GrGpuCommandBuffer.
Change-Id: Ifa9c7d801c97c225989d2542709c89f36ddfdc5e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235799
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
gn_to_bp: wrap defines in ifndef
create_apk.py assumes you are either run from the aosp tree, or you are
being run from make_universal_apk.py, which now defers to create_apk.py
for all functionality, even argument parsing.
tools/skqp/generate_gn_args moved some functionity into skqp_gn_args.py,
which is now used by create_apk.py
create_apk now accepts android sdk license for you.
create_apk and make_universal_apk.py now are better about cleaning up
after exceptions happen.
Old script make_apk.sh now just points at make_universal_apk.py
CQ_INCLUDE_TRYBOTS=skia.primary:Build-Debian9-Clang-x86-devrel-Android_SKQP,Test-Debian9-Clang-NUC7i5BNK-CPU-Emulator-x86-devrel-All-Android_SKQP
Change-Id: I2dba20ef7017987cabb2bd49f070e2b1594785d5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235678
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
Move everything to SkRemoteGlyphCache.cpp. Add a call
to SkStrikeServer (AddGlyphForTest), to make tests work.
* Misc cleanups
Change-Id: I22bea686838f60cf96d097e1ea025cb5399903e7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235096
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
The new namespace 'skif' will contain many more types down the road
to help with image filter implementations. Too many to make inner
classes like Context was, but once the namespace exists, it doesn't
make sense for Context to be the only inner class.
Bug: skia:9282
Change-Id: I4ed76bd5f6c8f0b8ca2f2e1c5d76006c7cccf91e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234581
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
