As DAA does not chop edges at Y extrema, it's valid for convex edges to
have only one edge (e.g., a single cubic edge with the valley shape \_/).
This wasn't an issue for production because DAA is never called for
convex paths by default.
Bug=skia:7015
Change-Id: Iac79801d6a24188970ef6f7bf723494a25d92a1e
Reviewed-on: https://skia-review.googlesource.com/42942
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
For configs that compare results of two drawing methods, it's helpful to
know how the two images differed. This takes both images, PNG encodes them
(at maximum compression settings), then base64 encodes them into data URIs
so they can be viewed directly from the logs.
These kinds of failures are typically very rare, and currently happen
infrequently due to flaky GMs - we don't want to be using this kind of
facility all the time.
Bug: skia:7011
Change-Id: Ib6c271cb8f6cd657cf6ca8ccfee97d0193b4e6ed
Reviewed-on: https://skia-review.googlesource.com/43240
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
We like a LIFO default thread pool in tools like DM for better
memory/time locality... the bots use less memory this way, and
generally run faster.
But most use cases want a FIFO queue, so that they can get going
on the next parts of early work while later work is still running.
This splits the implementation into one using SkTArray and pop_back
for LIFO, and a new one using std::deque and pop_front for FIFO.
Change-Id: Ief203b6869a00f1f8084019431a781d15fc63750
Reviewed-on: https://skia-review.googlesource.com/41849
Commit-Queue: Mike Klein <mtklein@chromium.org>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: I35bc08ad72fb94d8e47fe342d314c4496b954226
Reviewed-on: https://skia-review.googlesource.com/40881
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Chrome would like to perform cpu-side preprocessing for gpu draws in parallel.
They do not want to go through a picture (since they have their own display list format).
The general idea is that we add a new SkDeferredDisplayListRecorder class to
perform all of Ganesh's cpu-side preprocessing ahead of time and in parallel.
The SkDDLRecorder operates like SkPictureRecorder. The user can get an SkCanvas
from the SkDDLRecorder and feed it draw operations. Once finished, the user
calls 'detach' to get an SkDeferredDisplayList. All the work up to and
including the 'detach' call can be done in parallel and will not touch
the GPU. To actually get pixels the client must call SkSurface::draw(SkDDL)
on an SkSurface that is "compatible" with the surface characterization
initially given to the SkDDLMaker.
The surface characterization contains the minimum amount of information Ganesh needs
to know about the ultimate destination in order to perform its cpu-side work
(i.e., caps, width, height, config).
Change-Id: I75faa483ab5a6b779c8de56ea56b9d90b990f43a
Reviewed-on: https://skia-review.googlesource.com/30140
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Bug: skia:
Change-Id: Icd905ea7e60a05bc3903eb85d111dcf73ce2c4dd
Reviewed-on: https://skia-review.googlesource.com/40690
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Re-land of: https://skia-review.googlesource.com/36560
All information needed by the thread is captured by the prepare
callback object, the lambda captures a pointer to that, and does the
mask render. Once it's done, it signals the semaphore (also owned by the
callback). The callback defers the semaphore wait even longer (into the
ASAP upload), so the odds of waiting for the thread are REALLY low.
Also did a bunch of cleanup along the way, and put in some trace markers
so we can monitor how well this is working.
Traces of a GM that includes GPU and SW path rendering (path-reverse):
Original:
https://screenshot.googleplex.com/f5BG3901tQg.png
Threaded, with wait in the callback (notice pre flush callback blocking):
https://screenshot.googleplex.com/htOSZFE2s04.png
Current version, with wait deferred to ASAP upload function:
https://screenshot.googleplex.com/GHjD0U3C34q.png
Bug: skia:
Change-Id: Idb92f385590749f41328a9aec65b2a93f4775079
Reviewed-on: https://skia-review.googlesource.com/40775
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This was created by looking at warnings produced by clang's
-Wzero-as-null-pointer-constant. This updates most issues in
Skia code. However, there are places where GL and Vulkan want
pointer values which are explicitly 0, external headers which
use NULL directly, and possibly more uses in un-compiled
sources (for other platforms).
Change-Id: Id22fbac04d5c53497a53d734f0896b4f06fe8345
Reviewed-on: https://skia-review.googlesource.com/39521
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
This reverts commit 76323bc061.
Reason for revert: Breaking NUC bots in threaded gm comparison:
https://chromium-swarm.appspot.com/task?id=382e589753187f10&refresh=10
Original change's description:
> Threaded generation of software paths
>
> All information needed by the thread is captured by the prepare
> callback object, the lambda captures a pointer to that, and does the
> mask render. Once it's done, it signals the semaphore (also owned by the
> callback). The callback defers the semaphore wait even longer (into the
> ASAP upload), so the odds of waiting for the thread are REALLY low.
>
> Also did a bunch of cleanup along the way, and put in some trace markers
> so we can monitor how well this is working.
>
> Traces of a GM that includes GPU and SW path rendering (path-reverse):
>
> Original:
> https://screenshot.googleplex.com/f5BG3901tQg.png
> Threaded, with wait in the callback (notice pre flush callback blocking):
> https://screenshot.googleplex.com/htOSZFE2s04.png
> Current version, with wait deferred to ASAP upload function:
> https://screenshot.googleplex.com/GHjD0U3C34q.png
>
> Bug: skia:
> Change-Id: I3d5a230bbd68eb35e1f0574b308485c691435790
> Reviewed-on: https://skia-review.googlesource.com/36560
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=egdaniel@google.com,mtklein@google.com,bsalomon@google.com,robertphillips@google.com,brianosman@google.com
Change-Id: Icac0918a3771859f671b69ae07ae0fedd3ebb3db
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/38560
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
All information needed by the thread is captured by the prepare
callback object, the lambda captures a pointer to that, and does the
mask render. Once it's done, it signals the semaphore (also owned by the
callback). The callback defers the semaphore wait even longer (into the
ASAP upload), so the odds of waiting for the thread are REALLY low.
Also did a bunch of cleanup along the way, and put in some trace markers
so we can monitor how well this is working.
Traces of a GM that includes GPU and SW path rendering (path-reverse):
Original:
https://screenshot.googleplex.com/f5BG3901tQg.png
Threaded, with wait in the callback (notice pre flush callback blocking):
https://screenshot.googleplex.com/htOSZFE2s04.png
Current version, with wait deferred to ASAP upload function:
https://screenshot.googleplex.com/GHjD0U3C34q.png
Bug: skia:
Change-Id: I3d5a230bbd68eb35e1f0574b308485c691435790
Reviewed-on: https://skia-review.googlesource.com/36560
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
We were ignoring the path renderer flag when drawing GMs or SKPs.
Bug: skia:
Change-Id: Iee443fb70f1faec65e46925fa0e3cea3716d448d
Reviewed-on: https://skia-review.googlesource.com/36861
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
review.skia.org/34361 accidentally started attempting to decode images
with transparency to a 565 sink. BRD helpfully decodes to N32 instead,
rather than failing. We don't need to test this here, and it draws to a
565 sink, resulting in incorrect images in Gold.
Change-Id: I9585b2c0c4526e5f33667bd8f57003449e735372
Reviewed-on: https://skia-review.googlesource.com/35707
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Move common code into the base class, so subclasses need not call
conversion_possible.
Use SkEncodedInfo rather than SkImageInfo, and use the proper frame.
API Changes:
- SkAndroidCodec:
- Add getEncodedInfo(), for SkBitmapRegionCodec
- SkEncodedInfo:
- Add opaque() helper
- SkBitmapRegionDecoder:
- Remove unused conversionSupported
(Split off from skia-review.googlesource.com/c/25746)
Bug: skia:5601
Change-Id: If4a40d4b98a3dd0afde2b6058f92315a393a5baf
Reviewed-on: https://skia-review.googlesource.com/34361
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
This also required extending the blacklist argument to support
negative matching and wildcards.
Bug: skia:6918
Change-Id: I915e305c75fe23fc3e11c2dd3e91570967da0aaa
Reviewed-on: https://skia-review.googlesource.com/31444
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
The only interesting difference here is that I've just skipped
cd_Documents() on Google3 iOS builds rather than adding a new target to
BUILD. We don't run the binary so it's kind of moot what directory it'd
run in.
Change-Id: I1994e0283d24bcc505fa9b2b7b58307eafa5be92
Reviewed-on: https://skia-review.googlesource.com/34742
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Adjust the configs specified by recipes to avoid the new error.
Change-Id: I23e31355e2faaab919d92abdb37a6f70cd2da1ff
Reviewed-on: https://skia-review.googlesource.com/32862
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
rm gm that appears to have been there solely for pdf, but we don't use
it for that now.
Bug: skia:
Change-Id: I3cf88db923c2445b7c95dda14da679a594117643
Reviewed-on: https://skia-review.googlesource.com/31760
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Bug: skia:
Change-Id: I505e5c339947e9fc8bbec6acefc48ee9f47c96d2
Reviewed-on: https://skia-review.googlesource.com/30581
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
cce8965d2c..878c8b1e5e
ANGLE now crashes (on program compilation) if there isn't a flush between uses of different flavors of ANGLE context (e.g., angle_gl_es2 vs. angle_gl_es3).
Change-Id: If59b6ec683e682db5214bb002a70863cee5fe013
Reviewed-on: https://skia-review.googlesource.com/28865
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
DAA is:
1. Much simpler than AAA.
SkScan_AAAPath.cpp is about 1700 lines.
SkScan_DAAPath.cpp is about 300 lines.
The whole DAA CL is only about 800 lines.
2. Much faster than AAA for complicated paths.
The speedup applies to GL backend (including ccpr)!
Here's the frame time of 'SampleApp --slide Chart' on macbook pro:
AAA-raster: 33ms
DAA-raster: 21ms
AAA-gl: 30ms
DAA-gl: 20ms
AAA-ccpr: 18ms
DAA-ccpr: 12ms
My linux desktop doesn't have SSE3 so the speedup is smaller
(~25% for Chart). I believe that DAA is so fast that I can enable
it for any paths (AAA is not enabled by default for complicated
paths because it is slow; hence our older supersampling scan
converter is used for stroking on Chart for AAA-xxx config.)
3. The SkCoverageDelta is suitable for threaded backend with
out-of-order concurrent scan conversion as commented in the source
code. Maybe we can also just send deltas to GPU.
4. Similar to most analytic path renderers, the quality is on the best
ground-truth level, unless there are intersections within a pixel.
The intersections look good to my eyes although theoretically that
could be arbitrary far from the ground truth (see my AAA slides).
5. For simple paths, such as circle, triangle, rrect, etc., DAA is
slower than AAA. But DAA is faster than our older supersampling
scan converter in most cases. As those simple paths usually don't
constitute the bottleneck of a picture (skp or svg), I strongly
recommend use DAA.
6. DAA also heavily favors blitMask so it may work quite well with
SkRasterPipeline and SkRasterPipelineBlitter.
Finally, please check https://skia-review.googlesource.com/c/22420/
which accelerate DAA by specializing blitCoverageDeltas for
SkARGB32_Blitter and SkARGB32_Black_Blitter. It brings a little(<5%)
speedup. But I couldn't figure out how to reduce the duplicate code
so I don't intend to land it.
Bug: skia:
Change-Id: I3b7ed6a727447922e645b1acb737a506e7c09a4c
Reviewed-on: https://skia-review.googlesource.com/19666
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Cary Clark <caryclark@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Will need guards for android (at least)
Bug: skia:
Change-Id: I2bb8e656997984489ef1f2e41cd3d301c4e7b947
Reviewed-on: https://skia-review.googlesource.com/26040
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Change-Id: I562d438bd65e9fd900cfc6831f971b4af25c8ae6
Reviewed-on: https://skia-review.googlesource.com/26361
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Bug: skia:
Change-Id: I401c5a9885c348aa424ab07b094acecddb209490
Reviewed-on: https://skia-review.googlesource.com/25860
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
They take a long time to upload, and we don't do anything with them.
BUG=skia:6821
Change-Id: I16c5fc423953fa3e9d0dcb184ecbbe23f3918357
Reviewed-on: https://skia-review.googlesource.com/26142
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Change-Id: Ia50661a8391da526d509adbe2d7203866c140b1c
Reviewed-on: https://skia-review.googlesource.com/25321
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
Not yet thread safe (so it forces threading off).
Builds JSON on the fly, so overhead is certainly bad.
Plan to fix all of that, but this at least "works".
There is now one tracing flag: 'trace'.
- 'debugf' installs the SkDebugf tracer.
- 'atrace' installs the Android ATrace tracer.
- Any other value is interpreted as a filename, and
produces a JSON file for chrome://tracing.
All three modes work in DM, nanobench, and Viewer.
Bug: skia:
Change-Id: I3fbc22382b99418a508c670be2770195c0a1c364
Reviewed-on: https://skia-review.googlesource.com/24781
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
[√] convert all stages to use SkJumper_MemoryCtx / be 2d-compatible
[√] convert compile to 2d also, remove 1d run/compile
[√] convert all call sites
[√] no diffs
Change-Id: I3b806eb8fe0c3ec043359616409f7cd1211a1e43
Reviewed-on: https://skia-review.googlesource.com/24263
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Bug: skia:6856
Change-Id: Iaaad2c22988cf8058304b7396c7d24eacd2f3edb
Reviewed-on: https://skia-review.googlesource.com/24745
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Derek Sollenberger <djsollen@google.com>
Also adds more trace events to GPU backend.
Change-Id: Ifa5f0cd4b1fd582f0cc30d37d9e6414dc498c75d
Reviewed-on: https://skia-review.googlesource.com/24622
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Change-Id: I395e3387df44cf5370fef6ab73db73228225622f
Reviewed-on: https://skia-review.googlesource.com/23946
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: skia:
Change-Id: I84dbd56c17d4856496af4491f340ec560e29c8a6
Reviewed-on: https://skia-review.googlesource.com/23200
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This reverts commit 742a3e298f.
Reason for revert: Breaking Android roll:
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp:453:18: error: no member named 'fColorPtr' in 'SkAndroidCodec::AndroidOptions'
codecOptions.fColorPtr = colorPtr;
~~~~~~~~~~~~ ^
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp:454:18: error: no member named 'fColorCount' in 'SkAndroidCodec::AndroidOptions'
codecOptions.fColorCount = colorCount;
~~~~~~~~~~~~ ^
Original change's description:
> Remove support for decoding to kIndex_8
>
> Fix up callsites, and remove tests that no longer make sense.
>
> Bug: skia:6828
> Change-Id: I2548c4b7528b7b1be7412563156f27b52c9d4295
> Reviewed-on: https://skia-review.googlesource.com/21664
> Reviewed-by: Derek Sollenberger <djsollen@google.com>
> Commit-Queue: Leon Scroggins <scroggo@google.com>
TBR=djsollen@google.com,scroggo@google.com
Change-Id: I1bc669441f250690884e75a9a61427fdf75c6907
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:6828
Reviewed-on: https://skia-review.googlesource.com/22120
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Fix up callsites, and remove tests that no longer make sense.
Bug: skia:6828
Change-Id: I2548c4b7528b7b1be7412563156f27b52c9d4295
Reviewed-on: https://skia-review.googlesource.com/21664
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Previously, SkGifCodec treated an error in the LZW data as incomplete,
since we can still draw the partially decoded image. But a client doing
incremental decodes needs to distinguish this from truly incomplete
data. In the case of an error, the client should not attempt to provide
more data and decode again.
Add kErrorInInput, and return it when SkGifCodec sees a fatal error.
Treat it the same as kIncompleteInput when it comes to filling and DM.
Bug: skia:6825
Change-Id: Ic6ce3a62c0b065ed34dcd8006309e43272a3db9f
Reviewed-on: https://skia-review.googlesource.com/21530
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Chris Blume <cblume@chromium.org>
We have removed support for drawing Index8, so stop testing it in DM.
Bug: skia: 6828
Change-Id: Ib2c4d3ebd371be704151a9f956c0ca2aaf2926a6
Reviewed-on: https://skia-review.googlesource.com/21525
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
This lets us run bots that upload images with --verbose.
Today we're getting away with --verbose on some bots because they happen
to skip upload.
Change-Id: If915a65987b43c945263ada7751bf36aedff605a
Reviewed-on: https://skia-review.googlesource.com/20834
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Let's see if this helps iOS?
BUG=skia:6748
Change-Id: Iec67eacef0058dfb79c0223a955a22c676a35278
Reviewed-on: https://skia-review.googlesource.com/20683
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
This reverts commit 7292231905.
This change relands the original plus the follow on change:
https://skia-review.googlesource.com/20059.
Additionally it adds a blacklist for the mac intel bots which
don't see to respect the added fences on the GPU.
Original change's description:
> Revert "Add API for flushing surfaces with gpu semaphores"
>
> This reverts commit 66366c6978.
>
> Reason for revert: Failing test on mac bots
>
> Original change's description:
> > Add API for flushing surfaces with gpu semaphores
> >
> > BUG=skia:
> >
> > Change-Id: Ia4bfef784cd5f2516ceccafce958be18a86f91d1
> > Reviewed-on: https://skia-review.googlesource.com/11488
> > Commit-Queue: Greg Daniel <egdaniel@google.com>
> > Reviewed-by: Brian Salomon <bsalomon@google.com>
> > Reviewed-by: Forrest Reiling <freiling@google.com>
>
> TBR=egdaniel@google.com,jvanverth@google.com,bsalomon@google.com,brianosman@google.com,freiling@google.com
>
> Change-Id: I75633a2732d2d48b1926f9ad818a9f1a9196d211
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:
> Reviewed-on: https://skia-review.googlesource.com/20063
> Commit-Queue: Greg Daniel <egdaniel@google.com>
> Reviewed-by: Greg Daniel <egdaniel@google.com>
TBR=egdaniel@google.com,jvanverth@google.com,bsalomon@google.com,brianosman@google.com,freiling@google.com
Change-Id: I4dc6c0e1deb0398eeb165a34f0a26af7a58259f1
Reviewed-on: https://skia-review.googlesource.com/20141
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
This reverts commit 81c83a7db4.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Revert "Do not return Index8 from SkAndroidCodec::computeOutputColorType"
>
> This reverts commit b6f4767294.
>
> Reason for revert: This breaks CTS tests in Android. Doh.
>
> Original change's description:
> > Do not return Index8 from SkAndroidCodec::computeOutputColorType
> >
> > Given that this is the only known use of Index8 color type,
> > this is essentially an experimental delete.
> >
> > Bug: skia:6620
> > Change-Id: Ib363d237e0217f6e7f461a62e54d32892c428095
> > Reviewed-on: https://skia-review.googlesource.com/10586
> > Reviewed-by: Leon Scroggins <scroggo@google.com>
> > Commit-Queue: Matt Sarett <msarett@google.com>
>
> TBR=msarett@google.com,scroggo@google.com,reed@google.com
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:6620
>
> Change-Id: I2b44c695b8b95659520e9532901f636f56e01e2a
> Reviewed-on: https://skia-review.googlesource.com/19084
> Reviewed-by: Matt Sarett <msarett@google.com>
> Commit-Queue: Matt Sarett <msarett@google.com>
TBR=msarett@google.com,scroggo@google.com,reviews@skia.org,reed@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: skia:6620
Change-Id: I7e4e3a5ec068102244ad3a0259aa6aded4f12f36
Reviewed-on: https://skia-review.googlesource.com/19802
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
Change-Id: If1360bee50c8c360e4b1edf09c8a39aa32a59eb9
Reviewed-on: https://skia-review.googlesource.com/19520
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Verified that this fixes the wrongness of a few of the colorImage
diffs in Gold.
Bug: skia:6738
Change-Id: Icf0b7573ccb87268b480d7cc0a6cfe6fa8ae73f7
Reviewed-on: https://skia-review.googlesource.com/19271
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Matt Sarett <msarett@google.com>
This reverts commit b6f4767294.
Reason for revert: This breaks CTS tests in Android. Doh.
Original change's description:
> Do not return Index8 from SkAndroidCodec::computeOutputColorType
>
> Given that this is the only known use of Index8 color type,
> this is essentially an experimental delete.
>
> Bug: skia:6620
> Change-Id: Ib363d237e0217f6e7f461a62e54d32892c428095
> Reviewed-on: https://skia-review.googlesource.com/10586
> Reviewed-by: Leon Scroggins <scroggo@google.com>
> Commit-Queue: Matt Sarett <msarett@google.com>
TBR=msarett@google.com,scroggo@google.com,reed@google.com
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:6620
Change-Id: I2b44c695b8b95659520e9532901f636f56e01e2a
Reviewed-on: https://skia-review.googlesource.com/19084
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
