The reason for the assert was breaking an assert, that if the CTM was scale/translate, that after
a preTranslate, it should still be that.
This is true... unless the new translate values are non-finite. In that case, we might turn a zero
into a NaN, (0 * non_finite --> nan), so we either have to require finite args (which we don't
at the moment) or we can't make this assert. This re-land removes that assert.
This reverts commit 268ed57d71.
Change-Id: I3c48a0aa17649351a246c1fbab5449f2d59aaf84
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263023
Commit-Queue: Mike Reed <reed@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Reed <reed@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This reverts commit 98bfcc7ff3.
Reason for revert: Flutter hitting assert:
../../third_party/skia/src/core/SkCanvas.cpp:1432: fatal error: "assert(fIsScaleTranslate == fMCRec->fMatrix.isScaleTranslate())"
Original change's description:
> Extend SkCanvas matrix stack to be 4x4, but with (basically) the same public API.
>
> Devices receive the 4x4, but by default they simply downsample it to SkMatrix.
>
> New SkM44 matrix for the impl. It differs from SkMatrix44 in a few ways
> - no tracking of "type"
> - faster for concat, as it does not use doubles for intermediates
> - much simpler API
>
> There are some low-bit differences in some gms, so adding a flag for clients to
> stage this change. (due to faster but lower-precision in SkM44::concat)
>
> Performance: running canvas_matrix bench
>
> 3x3 version:
>
> 167.93 canvas_matrix_3x3 8888
> 209.97 canvas_matrix_2x3 8888
> 174.87 canvas_matrix_scale 8888
> 135.30 canvas_matrix_trans 8888
>
> 4x4 version:
>
> 116.59 canvas_matrix_3x3 8888
> 105.40 canvas_matrix_2x3 8888
> 159.83 ? canvas_matrix_scale 8888
> 113.47 canvas_matrix_trans 8888
>
> Why faster?
> - not tracking matrix_type helps a lot it seems
> - faster full concat (no doubles)
>
> Before adding the specialized preConcats...
>
> 318.11 ? canvas_matrix_3x3 8888
> 339.38 canvas_matrix_2x3 8888
> 383.28 canvas_matrix_scale 8888
> 251.67 canvas_matrix_trans 8888
>
> Change-Id: I68eac942919fa5418081e789f31710a1e2a752da
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262056
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Florin Malita <fmalita@chromium.org>
> Commit-Queue: Mike Reed <reed@google.com>
TBR=mtklein@google.com,bsalomon@google.com,herb@google.com,fmalita@chromium.org,fmalita@google.com,reed@google.com,michaelludwig@google.com
Change-Id: I28c3d69c19ba44ab65ca7c059221b64c7dffef22
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263021
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Devices receive the 4x4, but by default they simply downsample it to SkMatrix.
New SkM44 matrix for the impl. It differs from SkMatrix44 in a few ways
- no tracking of "type"
- faster for concat, as it does not use doubles for intermediates
- much simpler API
There are some low-bit differences in some gms, so adding a flag for clients to
stage this change. (due to faster but lower-precision in SkM44::concat)
Performance: running canvas_matrix bench
3x3 version:
167.93 canvas_matrix_3x3 8888
209.97 canvas_matrix_2x3 8888
174.87 canvas_matrix_scale 8888
135.30 canvas_matrix_trans 8888
4x4 version:
116.59 canvas_matrix_3x3 8888
105.40 canvas_matrix_2x3 8888
159.83 ? canvas_matrix_scale 8888
113.47 canvas_matrix_trans 8888
Why faster?
- not tracking matrix_type helps a lot it seems
- faster full concat (no doubles)
Before adding the specialized preConcats...
318.11 ? canvas_matrix_3x3 8888
339.38 canvas_matrix_2x3 8888
383.28 canvas_matrix_scale 8888
251.67 canvas_matrix_trans 8888
Change-Id: I68eac942919fa5418081e789f31710a1e2a752da
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262056
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Current strategy: everything from the top
Things to look at first are the manual changes:
- added tools/rewrite_includes.py
- removed -Idirectives from BUILD.gn
- various compile.sh simplifications
- tweak tools/embed_resources.py
- update gn/find_headers.py to write paths from the top
- update gn/gn_to_bp.py SkUserConfig.h layout
so that #include "include/config/SkUserConfig.h" always
gets the header we want.
No-Presubmit: true
Change-Id: I73a4b181654e0e38d229bc456c0d0854bae3363e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/209706
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Hal Canary <halcanary@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
It's been driving me nuts that I can't just write `SkMatrix44 m;`,
and I often don't care whether it's initialized or not. The default
identity constructor would be nice to use, but it's deprecated.
By tagging this constructor deprecated, we're only hurting ourselves;
our big clients disable warnings about deprecated routines and use it
freely.
A quick tally in Skia shows we mostly use the uninitialized constructor,
but sometimes the identity constructor, and there is a spread of all
three in Chromium. So I've left the two explicit calls available.
I switched a bunch of calls in Skia to use the less verbose constructor
where it was clear that it didn't matter if the matrix was initialized.
Literally zero of the kUninitialized constructor calls looked important
for performance, so the only place I've kept is its lone unit test.
A few places read clearer with an explicit "identity" to read.
Change-Id: I0573cb6201f5a36f3b43070fb111f7d9af92736f
Reviewed-on: https://skia-review.googlesource.com/c/159480
Reviewed-by: Brian Osman <brianosman@google.com>
SkMatrix::mapHomogeneousPoints takes an array of SkScalar,
but expects essentially SkPoint3, so make it so.
R: robertphillips@google.com, reed@google.com
Bug: skia:6898
Change-Id: Ibaf8b05c08b7df16c67d6a77d914667ace9a70da
Reviewed-on: https://skia-review.googlesource.com/58380
Commit-Queue: Cary Clark <caryclark@skia.org>
Commit-Queue: Cary Clark <caryclark@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Replace with std::unique_ptr.
Change-Id: I5806cfbb30515fcb20e5e66ce13fb5f3b8728176
Reviewed-on: https://skia-review.googlesource.com/4381
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
This patch ensures that when inverting a SkMatrix44, we handle small
floats properly. When inverted these can cause infinite values, but
still evaluate to true in an if condition.
BUG=chromium:498516
Review URL: https://codereview.chromium.org/1209763002
Tweak some test values to pass with floats.
As expected, this regresses matrix44_setconcat_general by about 2x.
BUG=skia:
Review URL: https://codereview.chromium.org/1169813006
This change removes sk_stdint.h since it is only needed for vs2008 and earlier.
This change removes SK_MMAP_SUPPORT define since it is no longer used.
This change removes the stdio.h include from SkTypes.h since on many systems
this is a very large header, few Skia files actually use it, it is
available everywhere standard, and SkDebugf should be used instead.
After this change there is no need for external users to put Skia's
include/config into their own list of includes, saving the headache
of having two header files of the same name and sometimes getting the
wrong one depending on include order.
R=bsalomon@google.com, djsollen@google.com
Review URL: https://codereview.chromium.org/27044002
git-svn-id: http://skia.googlecode.com/svn/trunk@11738 2bbb7eff-a529-9590-31e7-b0007b416f81
I noticed SkMatrix <-> SkMatrix44 conversions were dropping the
perspective values on the floor. As we use SkMatrix44 heavily in
Chromium, I'm concerned this missing code will cause a bug eventually.
It should be correct to simply use the bottom row of the 4x4 matrix
excluding the third column.
Previously committed and reverted, second attempt with fix for
incorrect use of SkMScalar/SkScalar.
BUG=
R=reed@google.com, caryclark@google.com
Author: aelias@chromium.org
Review URL: https://codereview.chromium.org/25484006
git-svn-id: http://skia.googlecode.com/svn/trunk@11624 2bbb7eff-a529-9590-31e7-b0007b416f81
I noticed SkMatrix <-> SkMatrix44 conversions were dropping the
perspective values on the floor. As we use SkMatrix44 heavily in
Chromium, I'm concerned this missing code will cause a bug eventually.
It should be correct to simply use the bottom row of the 4x4 matrix
excluding the third column.
BUG=
R=reed@google.com
Author: aelias@chromium.org
Review URL: https://codereview.chromium.org/25484006
git-svn-id: http://skia.googlecode.com/svn/trunk@11622 2bbb7eff-a529-9590-31e7-b0007b416f81
method. Preliminary results using Chromium's cc_perftests
show that we can avoid almost half of the default constructors from
redundantly/unnecessarily initializing the matrix to identity.
Review URL: https://codereview.appspot.com/6872056
git-svn-id: http://skia.googlecode.com/svn/trunk@6742 2bbb7eff-a529-9590-31e7-b0007b416f81
add bench
optimize operator== by performing 4 compares in a row before checking
optimize setconcat by noting when we can write the answer directly into this
At least on this macbook, I had to mark helpers like isIdentity() as inline to get them inlined.
Review URL: https://codereview.appspot.com/6863053
git-svn-id: http://skia.googlecode.com/svn/trunk@6655 2bbb7eff-a529-9590-31e7-b0007b416f81
