Modifies helpers on GrGLSLGeometryProcessor that insert, set, and make
keys for view/local matrix uniforms to not omit the uniform when
the matrix is identity or use a float4 when it is scale/trans. Always
uses a 3x3.
Bug: skia:11844
Change-Id: I0f25b60b46b8932d7e2cac4a50159d22b9cd84d2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/395656
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
into a new GrGLSLGeometryProcessor. Since NVPR is no more this
distinction (between GLSL- Primitive and Geometry -Processor)
probably isn't needed/useful.
Bug: skia:11760
Change-Id: I75621725bd2b0ef3dbac2ea6449bd571551babab
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/388036
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
With the removal of NVPR we no longer need this distinction.
Bug: skia:11760
Change-Id: I225a4feb764395fb72aca3ffc8b6d05396bf0b1e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/386890
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
This is useful because it allows the variables to be declared as `const`
when they are trivial values like `half4(1)`. This enables the constant
folder to simplify or eliminate them. In most cases, this is only a
small benefit, as you'd expect a competent GPU driver to do the same.
However, Mali-400 can benefit significantly from optimizing away the
multiplication against a constant half4(1) coverage in Porter-Duff.
Mali-400 performance is back to normal: http://screen/3cDxdaGkYE8oBcS
Change-Id: I21fd23f91f747079cd05b082f7b3444aeabafb93
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/382476
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
This enforces write-only access to the mapped buffers, will enable
chaining of indirect strokes, and gives us the ability to reorder the
fields for Metal.
Bug: chromium:1172543
Bug: skia:11291
Bug: skia:10419
Change-Id: I4449ff85dd0019f6d6d6781ede52bcf26dee8b02
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/367416
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This reverts commit 1eea1ea8c1.
Reason for revert: fixed implicit copy cons
Original change's description:
> Revert "Write pixels goes through GrRenderTask system."
>
> This reverts commit 27efe6cb1e.
>
> Reason for revert: wasm compile
>
> Original change's description:
> > Write pixels goes through GrRenderTask system.
> >
> > The specific motivation is to remove some uses of GrResourceProvider
> > making textures with data in lazy callbacks. But it's a general
> > improvement that could allow use cases like writePixels in DDL
> > recordings.
> >
> > Bug: skia:11204
> >
> > Change-Id: Ic55c3f75976a1d3a7d93981e21be75a3053ef069
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/356845
> > Reviewed-by: Adlai Holler <adlai@google.com>
> > Commit-Queue: Brian Salomon <bsalomon@google.com>
>
> TBR=bsalomon@google.com,adlai@google.com
>
> Change-Id: I116caf1e4dd9015270b9d4f810bd26e0e30a6497
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:11204
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/359559
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,adlai@google.com
# Not skipping CQ checks because this is a reland.
Bug: skia:11204
Change-Id: I7d8f92415995f03301ffb147500d972e6bd17640
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/359561
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 27efe6cb1e.
Reason for revert: wasm compile
Original change's description:
> Write pixels goes through GrRenderTask system.
>
> The specific motivation is to remove some uses of GrResourceProvider
> making textures with data in lazy callbacks. But it's a general
> improvement that could allow use cases like writePixels in DDL
> recordings.
>
> Bug: skia:11204
>
> Change-Id: Ic55c3f75976a1d3a7d93981e21be75a3053ef069
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/356845
> Reviewed-by: Adlai Holler <adlai@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,adlai@google.com
Change-Id: I116caf1e4dd9015270b9d4f810bd26e0e30a6497
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:11204
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/359559
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
The specific motivation is to remove some uses of GrResourceProvider
making textures with data in lazy callbacks. But it's a general
improvement that could allow use cases like writePixels in DDL
recordings.
Bug: skia:11204
Change-Id: Ic55c3f75976a1d3a7d93981e21be75a3053ef069
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/356845
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
These need to change because type coercion in SkSL is about to become
more strict in a followup CL; we are disallowing expressions that mix
ints and floats without a cast.
Change-Id: Iff5e2820806b9419afdfcbf25d4a7f96f2eeeccb
Bug: skia:11164
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/353416
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Change readPixels contract to allow unknown->unknown AT reads, but
fail if one side is unknown and the other isn't (and update GPU read
pixels test accordingly).
Also, ProxyUtils::MakeTextureProxyViewFromData takes GrPixmap.
Bug: skia:8862
Change-Id: I771c154833408e666f860413c1a711714696326d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/347196
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
No more
friend class ::SkArenaAlloc; // for access to ctor
Change-Id: I76fa3319498a965623e6865b75d1fb507ab845a6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/344236
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Just the class/files. variable names and additional comments to follow.
Change-Id: Ic03d07fd5009eaf3d706c2536486a117328963fc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/342617
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
I think this is vestigial from some time in the past where RTC was
public.
Also just expose the methods that add ops rather than have so many
friends + testingOnly versions.
Change-Id: I60d9fdff23b2d67039a7b37815da7ff9e73d8999
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/339158
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
In follow on CLs we need to know what the load op is when we try to use
discardable msaa attachments. For vulkan the load op affects how we
copy the resolve attachment into the msaa attachment, which changes the
render pass we use (adds extra subpass). We need to be able to make a
compatible render pass to compile programs.
Bug: skia:10979
Change-Id: I40c23a18b251af6a2ad3b78a1f6382bdba0b90c4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/336598
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
The important part is in GrOpFlushState.h were previously
we were taking a mutable pointer to the view, which should
at least be a const pointer and was making us do funky things
in some of the calling code. But I decided to go all the way
and do a const ref instead which is The Way It Should Be (tm).
Change-Id: I399d102e8b5e0a5059168cc450ae66f12ad47e13
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/336451
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Adlai Holler <adlai@google.com>
Introduce three calls on GrOp: Make, MakeWithExtraMemory,
and MakeWithProcessorSet. Instead of returning
unique_ptr<GrOp>, they return a type of GrOp::OpOwner.
GrOp::OpOwner safely deletes the op when it goes out
of scope for either new/delete or GrOpMemoryPool
allocations.
In order to make the code easier to refactor, I
eliminated MakeArg from the helpers.
Change-Id: Icfd697906f3147a8734575d08bd7195e7517383a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/323778
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Herb Derby <herb@google.com>
This CL adds a new type GrDstSampleType to say how we will sample the dst.
We add tracking of the GrDstSampleType in the recording of GrOps and
then during execution passing the information along to the GrPipeline.
In general the tracking of GrDstSampleType is a global state of a GrOpsTask
so it is kept separate fro the DstProxyView which is more specific to a
single Op on the GrOpsTask.
Bug: skia:10409
Change-Id: Ie843c31f2e48a887daf96cee99ed159b196cb545
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/315645
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Mechanically updated via Xcode "Replace Regular Expression":
typedef (.*) INHERITED;
-->
using INHERITED = $1;
The ClangTidy approach generated an even larger CL which would have
required a significant amount of hand-tweaking to be usable.
Change-Id: I671dc9d9efdf6d60151325c8d4d13fad7e10a15b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/314999
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This reverts commit d169e1915c.
Reason for revert: broke chrome via code generator
Original change's description:
> Migrate GrSurfaceContext readPixels to take direct context
>
> After this lands we'll proceed up the stack and add the direct
> context requirement to the public API and SkImage.
>
> Bug: skia:104662
> Change-Id: I4b2d779a7fcd65eec68e631757821ac8e136ddba
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/309044
> Commit-Queue: Adlai Holler <adlai@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=robertphillips@google.com,adlai@google.com
Change-Id: I6126f2dca4bc902c903512ac486e22841cc472e5
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:104662
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/309281
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Adlai Holler <adlai@google.com>
After this lands we'll proceed up the stack and add the direct
context requirement to the public API and SkImage.
Bug: skia:104662
Change-Id: I4b2d779a7fcd65eec68e631757821ac8e136ddba
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/309044
Commit-Queue: Adlai Holler <adlai@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
The majority of existing call sites were automatically updated using
clang-tidy -fix. A small handful required a manual update,
e.g. CppCodeGen.
This check is a bit lenient, and in particular will not flag cases like
`std::unique_ptr<Base>(new Derived())` which is still pretty common
throughout our codebase. This CL does not attempt to replace all the
cases that ClangTidy does not flag.
Change-Id: I5eba48ef880e25d22de80f321a68c389ba769e36
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/307459
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Mostly this is a lot of plumbing of sk_sp around instead of const*.
This does allow the d3d and vk backends to hold refs to the GrBuffers that
are bound on a command buffer. This means that our buffer alloc pools will
not try to reuse this buffers until the gpu is done with them. Previously
vk and d3d will sniff out if one of these buffers was being used again
while still active on the gpu and rip out the internal backend buffer and
allocate a new one which is not cheap. We see a lot of perf wins from
not doing this.
Change-Id: I9ffe649151ee43066dce620bd3e2763b029a9811
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/303583
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
All coord transforms were identity, so this enshrines that
knowledge, then transitively removes a large amount of code.
Bug: skia:10416
Change-Id: Iae4af9ca21590bced1ce9fce3ab807f6cceaebd4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/300234
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This CL makes it explicit that the unit tests always get a direct context.
It is mainly a mechanical CL.
Change-Id: I49e0628851d9c81eb47386ef978edf905c6469d8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/299866
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This CL is not fully comprehensive; for instance, it does not contain
fixes for backends that don't compile on Mac. But it does resolve the
vast majority of cases that trigger -Wimplicit-fallthrough.
A few minor bugs were found and fixed, but none that were likely to
affect normal operation.
Change-Id: I43487602b0d56200ce8b42702e04f66390d82f60
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/295916
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit 4730f29993.
Reason for revert: Fix WIP
Original change's description:
> Revert "Simplify GrRTC::clean APIs"
>
> This reverts commit 6cbd7c2e57.
>
> Reason for revert: mac/generated files failures
>
> Original change's description:
> > Simplify GrRTC::clean APIs
> >
> > The CanClearFullscreen enum type is removed. Most usages of clear() had
> > kYes because a null scissor rect was provided, or had kNo because the
> > scissor was really critical to the behavior. A few places did provide a
> > scissor and kYes (e.g. for initializing the target).
> >
> > To simplify this, the public GrRTC has two variants of clear(). One with
> > only a color (for fullscreen clears), and one with a rect for partial
> > clears. The private API also adds a clearAtLeast() function that replaces
> > the several cases where we'd have a scissor but could expand to fullscreen.
> >
> > I find the current control flow in internalClear() to be hard to
> > follow (albeit I was the one to make it that way...), but later CLs
> > will improve it.
> >
> > Bug: skia:10205
> > Change-Id: I87cf8d688c58fbe58ee854fbc4ffe22482d969c6
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/290256
> > Reviewed-by: Brian Salomon <bsalomon@google.com>
> > Commit-Queue: Michael Ludwig <michaelludwig@google.com>
>
> TBR=bsalomon@google.com,csmartdalton@google.com,michaelludwig@google.com
>
> Change-Id: I7131df6f5323f4f9c120cbcfd9bc57e627e2eb65
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:10205
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/291842
> Reviewed-by: Michael Ludwig <michaelludwig@google.com>
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
# Not skipping CQ checks because this is a reland.
Bug: skia:10205
Change-Id: Id5db153d7c2500279cca8478818b66f67a53e143
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/291844
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
This reverts commit 6cbd7c2e57.
Reason for revert: mac/generated files failures
Original change's description:
> Simplify GrRTC::clean APIs
>
> The CanClearFullscreen enum type is removed. Most usages of clear() had
> kYes because a null scissor rect was provided, or had kNo because the
> scissor was really critical to the behavior. A few places did provide a
> scissor and kYes (e.g. for initializing the target).
>
> To simplify this, the public GrRTC has two variants of clear(). One with
> only a color (for fullscreen clears), and one with a rect for partial
> clears. The private API also adds a clearAtLeast() function that replaces
> the several cases where we'd have a scissor but could expand to fullscreen.
>
> I find the current control flow in internalClear() to be hard to
> follow (albeit I was the one to make it that way...), but later CLs
> will improve it.
>
> Bug: skia:10205
> Change-Id: I87cf8d688c58fbe58ee854fbc4ffe22482d969c6
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/290256
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
TBR=bsalomon@google.com,csmartdalton@google.com,michaelludwig@google.com
Change-Id: I7131df6f5323f4f9c120cbcfd9bc57e627e2eb65
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:10205
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/291842
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
The CanClearFullscreen enum type is removed. Most usages of clear() had
kYes because a null scissor rect was provided, or had kNo because the
scissor was really critical to the behavior. A few places did provide a
scissor and kYes (e.g. for initializing the target).
To simplify this, the public GrRTC has two variants of clear(). One with
only a color (for fullscreen clears), and one with a rect for partial
clears. The private API also adds a clearAtLeast() function that replaces
the several cases where we'd have a scissor but could expand to fullscreen.
I find the current control flow in internalClear() to be hard to
follow (albeit I was the one to make it that way...), but later CLs
will improve it.
Bug: skia:10205
Change-Id: I87cf8d688c58fbe58ee854fbc4ffe22482d969c6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/290256
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Change-Id: Ib1c0570d747bf9f46be3486f37eba3af53ed1e3d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/281642
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
This is a reland of 17f05c737e
Original change's description:
> Rename instanceAttribSupport -> drawInstancedSupport
>
> Change-Id: I7d8ff8597849f2b910928867842857e25a12b4b1
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/281582
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com
Change-Id: I2e15ac72d86747c30e71bb50d30da48a5a342772
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/282118
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Change-Id: Ie877e995642fe6be48b7e242aa955e87ecc14fb0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/281385
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This makes onPrePrepare match onPrepare & onExecute. Most of the new method bodies will-have-to/should be filled in anyway.
Change-Id: Ifc897feaeb2d8fe6eec3ac3a8e91f99393ad6758
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/277542
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Every op that updates dynamic state between draws has now been
migrated to explicit binding.
Change-Id: Ibd13c9c0ffb16a205c073dfb4fd21d93f496dc52
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/277493
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Also adds a drawIndexPattern() helper method to GrOpsRenderPass, and
starts testing a base index with drawIndexedInstanced.
Change-Id: I3fbb1b5a2a1012a4fcbe126c54ddbc8c17ce80b0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/276739
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This CL also incidentally adds:
1) a GrMeshDrawOp::Target 'outputView' virtual and switches GrOpFlushState over to overriding it.
2) a createProgramInfo helper to GrSimpleMeshDrawOpHelper
Bug: skia:9455
Change-Id: I88ce51c585b1458ee79a9aaa7024190e9f19198c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/274506
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This reverts commit d3606518fa.
Reason for revert: DDL3 bots are red
Original change's description:
> Add onPrePrepareDraws & createProgramInfo methods to GrDrawVerticesOp
>
> This CL also incidentally adds:
>
> 1) a GrMeshDrawOp::Target 'outputView' virtual and switches GrOpFlushState over to overriding it.
>
> 2) a createProgramInfo helper to GrSimpleMeshDrawOpHelper
>
> Bug: skia:9455
> Change-Id: Iecd712d3ac76038651bd2e0512134e310930d527
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/274551
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Robert Phillips <robertphillips@google.com>
TBR=egdaniel@google.com,robertphillips@google.com
Change-Id: I6e44ba3bc47df27479af9344af946e27f0a2e937
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:9455
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/274505
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This CL also incidentally adds:
1) a GrMeshDrawOp::Target 'outputView' virtual and switches GrOpFlushState over to overriding it.
2) a createProgramInfo helper to GrSimpleMeshDrawOpHelper
Bug: skia:9455
Change-Id: Iecd712d3ac76038651bd2e0512134e310930d527
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/274551
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
