We now track each slot's scope depth when it is written, and when scopes
are closed, we remove variables from display which fall out of scope.
Note that we DON'T have a specific trace-op dedicated to setting a
variable's stack depth when it is first declared. This is okay because
the SkVM code generation always stores a zero to a variable's slots as
soon as the variable is declared. This will consistently initialize its
depth to the depth of its initial declaration.
Change-Id: I68f76dfe2930fcd415ba635206cce3d0b94d1aac
Bug: skia:12741
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/484564
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
We didn't have any test cases where a loop variable (other than a loop
induction variable) fell out of scope. Now we have a demonstration of
the trouble behavior.
Change-Id: Iec070748c93aaeab1dc41a46c42e33c78b73d7f5
Bug: skia:12741
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/484560
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
These will give the debugger enough information to discard variables as
they fall out of scope.
Change-Id: Ia400e82a3ca9cf0a51a72d819f897d346979226c
Bug: skia:12741
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/484556
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Note that the 2D cross product isn't defined. There are at least two
possible interpretations of what that might mean. This name makes it
clearer that we're asking for the length of the resulting vector, if
we computed the 3D cross product (assuming Z == 0 for both vectors).
It also eliminates name overlap between builtin functions and actual
intrinsics.
Change-Id: I24e8bc0ab2ec91aaace20f0dd3e8565c10bd44a0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/484440
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This CL adds the trace op and tests the builder commands, but it is not
yet hooked up to the SkVM code generator or debugger.
Change-Id: Iaa64293dfd0973e299eb480cb2b43672b0886c32
Bug: skia:12741
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/484439
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Previously, the variable pane listed variables in slot order, which was
not very helpful (other than usually mapping to a top-to-bottom order in
the original source code). Now, the variable pane sorts variables to the
top when they are modified, and maintains their relative order
throughout execution. This is much easier to follow.
http://screen/C9odSHV4asFSLZH
Change-Id: Id86adf745207451a38a4dc46756f316e8d86bf81
Bug: skia:12666
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/483958
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Previously, return values like `[func].result` would stick around in the
Variables table indefinitely. This felt very counterintuitive. Now they
only appear for one step, then vanish.
Change-Id: Iedfc7d2ddf136111005b26aaefb380ffc6281d05
Bug: skia:12666
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/483605
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
We already had this logic in SkVMDebugTrace::dump; it just needed to be
factored out so that it could be accessed directly.
Change-Id: Ib497b82a7722b8ac2285de74f1937379c2f9a51b
Bug: skia:12666
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/483600
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
By tracking slot writes using a dirty mask, and reporting these in the
VariableData, we will be able to highlight assigned-to variables in the
debugger.
Change-Id: I93a767095c9c1b6dedc55a08424649f83aa1c960
Bug: skia:12666
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/483598
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Change-Id: Ib1ea2936f7a9431bc62c04b1931cf6da2c213b36
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/483496
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
We already had this logic in SkVMDebugTrace::dump; it just needed to be
factored out so that it could be accessed directly.
Change-Id: Idd6c92d23ab4dddc60fdc3c7b1693a0d89b1c992
Bug: skia:12666
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/483517
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Stepping out is extremely similar to stepping-over, so this was mostly
working already.
Change-Id: Ib1c1ba96b45a732500e72b6da4cbfe41a1f75307
Bug: skia:12666
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/483196
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Change-Id: Id4fc455f0eb23aa8d9b6f5474be7f6eba71c48de
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/482698
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This class is responsible for interpreting a debug trace and allowing it
to be stepped through, like a debugger. It tracks the current line
number, call stack, slot values, and associates slots with stack frames.
It supports stepping forward or stepping over (i.e., stepping to the
next line in the current function, hiding function calls).
Change-Id: I2b7d90c3b38b0006bebdfbf65a7bf678d5227d56
Bug: skia:12666
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/482460
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Chromium has been using the remote glyph cache for a few years now.
It's time to give it a proper home.
This is an intermediate CL. The old .h file includes the new .h file.
After I change the include paths in Chromium, I will delete the old
file.
Change-Id: Iaf00c46aa0698326c0bdec9a0eed218bcc3e334e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/482700
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
This reverts commit 85cc1bece7.
Reason for revert: ends up not being useful after all
Original change's description:
> Trace function return values after function-exit.
>
> This will allow function return values to be easily seen when stepping
> "over." This has the unexpected side benefit of generating slightly
> fewer ops when a function has unoptimizable conditional returns.
>
> Change-Id: I48d23de635d3caaddff91aa595593d0371dfcdcb
> Bug: skia:12708
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/481076
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: John Stiles <johnstiles@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
Bug: skia:12708
Change-Id: I61ebb175b60d2060f6ad21b170238b37557b80be
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/482458
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Also fixes recursion end point update in recursive_edge_intersect, which
was causing us to search in the wrong area of the lines and falsely
report no intersection when there should have been one (which is then
detected by the topology check in intersectEdgePair() and more less
accurately corrected for).
Bug: chromium:1245359
Change-Id: I1d21c934a23c9b99c3767849ee19bc2f6c551d3f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/482456
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
The debug-slot code didn't expect to encounter a void type.
Change-Id: Ied452b51e1cf90a0c0bc24770f82e711105b8e82
Bug: skia:12708
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/482461
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Function return values exist at the boundary between stack frames and
will need slightly special treatment by the debugger.
Change-Id: I017b5713919f507074f072d040332325307c2e81
Bug: skia:12666
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/482459
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:12701
Change-Id: I51bfad4ff61f2ab32753e532eb5b6ee46d765303
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/481737
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
There was only one virtual method, so switch that to a bool stored in
the base class. The derived types exist as hints for the reader, and an
easy way to adjust how the new localToDevice is constructed.
With this change, we don't need SkSimpleMatrixProvider. SkMatrixProvider
is concrete, so we can use it directly. SkOverrideDeviceMatrixProvider
no longer needs the original provider for anything, so remove that
parameter. It now exists solely to inhibit the hitsPixelCenters flag.
Fix a few spots (SkParticleBinding, some sites in SkRuntimeEffect) where
we used SkSimpleMatrixProvider, even though the local coordinates being
passed did not obey the hits-pixel-centers constraints.
Most importantly, document how localToDeviceHitsPixelCenters works.
Change-Id: Ibe9060bac0822d0edf52a507d390bd198d8e6dbd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/482176
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This entire API existed, but was unused (no longer connected to
drawVertices or runtime effects).
In theory, we could further simplify some of the matrix providers, but
more importantly - I have serious doubts about the correctness of
localToDeviceHitsPixelsCenters for most of them.
Change-Id: If5af182015dd96e5ed3353a117223e8dbbe17097
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/481683
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This fix appeared in prior CL patchsets, but got lost through rebases
and CL splits.
Change-Id: I1befff3830b40740f1e52e3e88f74484122027ce
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/481680
Reviewed-by: Julia Lavrova <jlavrova@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Change-Id: I57233c89fb27f09ca22509edeab79ea6b158b3c3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/481281
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
The current system short circuits out when an SkTextBlob will draw
anything based on its bounds, the bounds of the clip, and the state
of the paint.
A similar thing needs to happen, but the clip needs to be ignored.
Return the nullptr if the SkTextBlob would never draw to signal that
the Slug can be ignored.
Bug: chromium:1277583
Change-Id: I2d6641e03c88ae5f160c479c9e715ad8dc9f65b3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/481592
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Bug: skia:12701
Change-Id: If286f9398c099298b1a543a12d4a28ba70f7a20b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/479062
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This reverts commit 062652067b.
Reason for revert: design change removes need for this op
Original change's description:
> Add SkVM op `trace_done` to indicate completion of debug tracing.
>
> This op can be used to invoke a callback function and dump the log to
> disk when it is ready. SkRuntimeEffect doesn't have any other viable
> mechanisms for detecting that a paint has completed, AFAIK. We can
> wait for ~SkRTShader to occur, but there's no guarantee that this will
> happen quickly, and the SkPaint with the SkRTShader shader can be reused
> over and over again.
>
> Unlike other trace ops, this only needs a trace mask, not an execution
> mask (we are unconditionally done at the end of main).
>
> Change-Id: I6f7ee41f2005b65940d36dee892279d4f245509f
> Bug: skia:12708
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/479876
> Auto-Submit: John Stiles <johnstiles@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
Bug: skia:12708
Change-Id: Ic4c4f5dd72541195f07ca32035267a20a82536e7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/481577
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Color filters and blenders are currently not supported for tracing,
because we don't have access to the pixel coordinate, and so there is
nothing to compare the debug-trace coordinate with.
Change-Id: I7fe7fb4955b002432046ceef61c6f0a4c721a581
Bug: skia:12708
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/481278
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Added comments to explain the semantics (both what's expected when you
set the uniform, and what you see in the shader). The old name was
confusing, because it sounded like you got an sRGB color in the shader.
This is terse, but I think it's the cleanest syntax - and for embedding
clients, they can use C++ (etc.) API to require that color uniforms are
assigned from color types.
Bug: skia:10479
Change-Id: If00ea754060494aaa83001a5b357687953de8a5f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/480577
Reviewed-by: John Stiles <johnstiles@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This will allow function return values to be easily seen when stepping
"over." This has the unexpected side benefit of generating slightly
fewer ops when a function has unoptimizable conditional returns.
Change-Id: I48d23de635d3caaddff91aa595593d0371dfcdcb
Bug: skia:12708
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/481076
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Matrices now include [C][R] notation and vectors indicate .x/.y/.z/.w.
Previously this information was missing, so you couldn't tell which slot
of a variable was being altered.
Change-Id: I590614372b1fc98e95e8fb5ebc3d318c449a8ee1
Bug: skia:12708
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/480798
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This op can be used to invoke a callback function and dump the log to
disk when it is ready. SkRuntimeEffect doesn't have any other viable
mechanisms for detecting that a paint has completed, AFAIK. We can
wait for ~SkRTShader to occur, but there's no guarantee that this will
happen quickly, and the SkPaint with the SkRTShader shader can be reused
over and over again.
Unlike other trace ops, this only needs a trace mask, not an execution
mask (we are unconditionally done at the end of main).
Change-Id: I6f7ee41f2005b65940d36dee892279d4f245509f
Bug: skia:12708
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/479876
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
SkRuntimeEffect needs an API for generating debug traces. This means
that we will need references to debug traces inside a public header.
Rather than reference SkVMDebugInfo directly, we now have a simpler
base class for debug traces. This is better suited to landing in
include/.
I've also renamed SkVMDebugInfo to SkVMDebugTrace for consistency, since
it now contains all the trace data. (When it was first added, it only
had the slot info.)
Change-Id: Ibaa4dedf9a17b9462b4f233a28a7b875d0317892
Bug: skia:12708
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/480356
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This creates SkImageShader instances that do not perform color space
conversion, nor do they premultiply their pixels (if they started out
unpremultiplied). These are useful for runtime shaders that want
non-color inputs (like normal maps or lookup tables).
Includes GM that demonstrates lack of color conversion, and lack of
premultiplication in the context of a lighting shader.
Bug: skia:10479
Change-Id: Ic07aa8b8d3407ae5f81bc075648fdcba6d4cce29
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/477299
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
dump() now emits the most important part of the debug trace: the actual
trace itself. This will make tests easier to write and reason about.
Change-Id: I414e26b80a05c9f7ea21956d84c5a682a5f3c274
Bug: skia:12708
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/479703
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
I ran into a snag while trying to hook up SkRuntimeEffect with debug
tracing. Runtime effects only have access to a skvm::Builder, and are
never exposed to the full skvm::Program. SkVMBlitter is responsible for
assembling the full skvm::Program, but is oblivious to runtime effects
and nested skvm sub-programs. Additionally, multiple runtime effects can
(and often do) coexist within a paint.
This CL changes how debug traces are enabled. skvm::Program no longer
has a `attachDebugTrace` method. Instead, this method lives on the
skvm::Builder. Calling `attachDebugTrace` generates a "trace-hook ID"
(which is actually an index into a vector of TraceHook pointers).
Every trace opcode now includes this trace hook ID. When the Builder
assembles a final Program, it copies the TraceHooks into the Program.
The skvm interpreter uses the trace hook ID on the op to dispatch a
trace command to its associated TraceHook.
From a user perspective, this doesn't change very much, but it does
mean that the SkVM Code Generator now supplies a TraceHook for us
(since it adds trace ops to the Builder and needs to know the proper
trace-hook ID).
Change-Id: I8bd5fea24f477f81470fae8ba41be45f76949407
Bug: skia:12708
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/479597
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Use that to preserve the alpha type of (unpremul) SkImages when
serializing. This ensures that the new GM works correctly in
serialize-8888, and is required for an upcoming "raw" image feature.
Change-Id: I747803c2928cbb5872d4c97a421701248d8f6a51
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/478957
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Previously, the trace opcodes took a single mask argument, which was
computed as `execution mask & trace mask`. This led to extra bit_ands in
the output, as this value would be need to be recalculated every time
the execution mask changed.
To reduce this cost on program size, the trace ops now take two mask
arguments and require that both must be true. We have four register
slots at our disposal in an Op, which is more than we need, so this
doesn't really cost us anything.
(As an extra minor optimization, if one of the masks is "always-on", we
optimize it away. This avoids burning a register just to hold a ~0
immediate value.)
Change-Id: I9eb71292a1983e71b03c7ac842534beb3d6bbf17
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/478456
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Add an array which represents the trace itself into the SkVMDebugInfo.
Since we expect complex programs to emit a lot of trace data, we try to
keep the JSON representation here compact. Ops and their data are
represented as a compact array of integers. Data fields can be left
unspecified; these are assumed to be zero.
Change-Id: Ia52ad280ab5989496eb495c4efb8b99aa72cda5f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/477983
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
switch is no longer an ES3-specific feature.
Change-Id: Ic878a77268e517e17699c2e35a37da6b0a7765dd
Bug: skia:12450
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/452320
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This also hides the ctors for the respective classes so you can't just
arbitrarily make one outside of the factories.
Change-Id: If31ac8ea9b54c9e10c162081251e77d7e9d07147
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/478956
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
With this CL, rt adjust is handled automatically by the backend of the
CommandBuffer when setViewport is called, so DrawPass and the
CommandBufferTest are updated to configure that (and the geometry of
command buffer test is rewritten to be in Skia's coord system instead
of NDC).
Currently, the metal command buffer uses push constants to set the
rtAdjust uniform. Hypothetically, D3D12 could use the root descriptor,
etc. There is some coupling here between the intrinsics the SkSL
programming environment operates in, and the backends configuring the
pipelines, but I don't think it's unreasonable and it seems cleaner
to me than having DrawPass bind and upload uniforms for all of the
intrinsics.
Cq-Include-Trybots: luci.skia.skia.primary:Test-Mac11-Clang-MacMini9.1-GPU-AppleM1-arm64-Release-All-Graphite,Test-Mac11-Clang-MacMini9.1-GPU-AppleM1-arm64-Debug-All-ASAN_Graphite,Build-Mac-Clang-arm64-Release-iOS_Graphite,Build-Mac-Clang-arm64-Debug-iOS_Graphite,Build-Mac-Clang-arm64-Debug-Graphite_NoGpu,Build-Mac-Clang-arm64-Debug-Graphite,Build-Mac-Clang-arm64-Debug-ASAN_Graphite,Build-Mac-Clang-arm64-Release-Graphite
Bug: skia:12466
Change-Id: Id91e9ffc31688886c5bf3ee6134567070820207a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/478656
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Auto-Submit: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Passes the Transform for each draw to the RenderStep, to both
writeVertices and writeUniforms, since any given RenderStep could
choose to transform vertices on the CPU, pack the matrix as instance
attributes, or upload it as a uniform.
Also updates UniformManager to take the source data as const void*
Cq-Include-Trybots: luci.skia.skia.primary:Test-Mac11-Clang-MacMini9.1-GPU-AppleM1-arm64-Release-All-Graphite,Test-Mac11-Clang-MacMini9.1-GPU-AppleM1-arm64-Debug-All-ASAN_Graphite,Build-Mac-Clang-arm64-Release-iOS_Graphite,Build-Mac-Clang-arm64-Debug-iOS_Graphite,Build-Mac-Clang-arm64-Debug-Graphite_NoGpu,Build-Mac-Clang-arm64-Debug-Graphite,Build-Mac-Clang-arm64-Debug-ASAN_Graphite,Build-Mac-Clang-arm64-Release-Graphite
Bug: skia:12466
Change-Id: I7ac40af0b7c123d068478f5672dda455c0bbbfb5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/478376
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
This demonstrates how much additional non-trace code can be generated
when debug traces are turned on. A followup CL adds a setting to disable
`trace_var`, which eliminates a significant percentage of the additional
ops (at the cost of removing valuable debug info).
Change-Id: I238e28e6f6531f1dbccfef8f1dcd24a1e8481669
Bug: skia:12692
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/478416
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Julia Lavrova <jlavrova@google.com>
Bug: skia:12466
Change-Id: I85d23e73a37a368ed68c81191d072014df110080
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/475645
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
