This allows us to change the underlying pointer without rebuilding the pipeline, e.g. when moving the blitter from scanline to scanline.
The extra overhead when not needed is measurable but small, <2%. We can always add back direct stages later for cases where we know the context pointer will not change.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3943
Change-Id: I827d7e6e4e67d02dd2802610f898f98c5f36f8cb
Reviewed-on: https://skia-review.googlesource.com/3943
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
I'm not yet caching these in the blitter, and speed is essentially unchanged in the bench where I am now building and compiling the pipeline only once. This may not be able to stay a simple std::function after I figure out caching, but for now it's a nice fit.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3911
Change-Id: I9545af589f73baf9f17cb4e6ace9a814c2478fe9
Reviewed-on: https://skia-review.googlesource.com/3911
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Matches our naming convention for all other types - factories that
return sk_sp (or any type that intelligently manages its own
lifetime) are named Make.
Previous factories are still around, assuming
SK_SUPPORT_LEGACY_COLOR_SPACE_FACTORIES is defined. Enable that
define for Android, etc.
See also: https://codereview.chromium.org/2442053002/
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3822
Change-Id: Iaea9376490736b494e8ffc820831f052bbe1478d
Reviewed-on: https://skia-review.googlesource.com/3822
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
The refactoring breaks off A2B0 tag support into a separate
subclass of SkColorSpace_Base, while keeping the current
(besides CLUT) functionality in a XYZTRC subclass.
ICC profile loading is now aware of this and creates the A2B0
subclass when SkColorSpace::NewICC() is called on a profile
in need of the A2B0 functionality.
The LabPCSDemo GM loads a .icc profile containing a LAB PCS and
then runs a Lab->XYZ conversion on an image using it so we can
display it and test out the A2B0 SkColorSpace functionality,
sans a/b/m-curves, as well as the Lab->XYZ conversion code.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2389983002
Review-Url: https://codereview.chromium.org/2389983002
This is only useful in the rare case that the dst does not
fall into one of our main paths.
But it's a good optimization, since this does happen,
and typically, the dst won't change.
ColorCodecBench z620 --nonstd --xform_only
Without Patch 511us
With Patch 348us
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3400
Change-Id: Ibf68d9ce7072680465662922f4aa15630545e3d6
Reviewed-on: https://skia-review.googlesource.com/3400
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
It will now reside in SkColorSpace_Base. Future work for SkColorSpace
will cause this function to not be desirable or sensible to call on
all SkColorSpaces. Call sites were changed to make a kSRGBLinear_Named
instead of kSRGB_Named -> makeLinearGamma() (the majority of cases),
and if that was not possible, SkColorSpace_Base::makeLinearGamma()
was called instead.
TBR=reed@google.com
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2412613005
Review-Url: https://codereview.chromium.org/2412613005
- perform version check in CreateProc for XfermodeImageFilter and ArithmeticImageFilter
This reverts commit 3ed485f424.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2992
Change-Id: Ib4a154cdd5f5d1dcac921ef50d53b79a2d6a1be8
Reviewed-on: https://skia-review.googlesource.com/2992
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
I also had to cut it down to just a global atomic bool... as a field in a global singleton accessed through instance(), it's very hard to make threadsafe.
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Ubuntu-Clang-GCE-CPU-AVX2-x86_64-Release-TSAN-Trybot
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2937
Change-Id: If80be987906dd521fbe644d1d0d577009f06d0e3
Reviewed-on: https://skia-review.googlesource.com/2937
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This is handy now, and becomes necessary with fancier backends:
- most code can't speak the type of AVX pipeline stages,
so indirection's definitely needed there;
- if the pipleine is entirely composed of stock stages,
these enum values become an abstract recipe that can be JITted.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2782
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Change-Id: Iedd62e99ce39e94cf3e6ffc78c428f0ccc182342
Reviewed-on: https://skia-review.googlesource.com/2782
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This lets them pick up runtime CPU specializations. Here I've plugged in SSE4.1. This is still one of the N prelude CLs to full 8-at-a-time AVX.
I've moved the union of the stages used by SkRasterPipelineBench and SkRasterPipelineBlitter to SkOpts... they'll all be used by the blitter eventually. Picking up SSE4.1 specialization here (even still just 4 pixels at a time) is a significant speedup, especially to store_srgb(), so much that it's no longer really interesting to compare against the fused-but-default-instruction-set version in the bench. So that's gone now.
That left the SkRasterPipeline unit test as the only other user of the EasyFn simplified interface to SkRasterPipeline. So I converted that back down to the bare-metal interface, and EasyFn and its friends became SkRasterPipeline_opts.h exclusive abbreviations (now called Kernel_Sk4f). This isn't really unexpected: SkXfermode also wanted to build up its own little abstractions, and once you build your own abstraction, the value of an additional EasyFn-like layer plummets to negative.
For simplicity I've left the SkXfermode stages alone, except srcover() which was always part of the blitter. No particular reason except keeping the churn down while I hack. These _can_ be in SkOpts, but don't have to be until we go 8-at-a-time.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2752
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Change-Id: I3b476b18232a1598d8977e425be2150059ab71dc
Reviewed-on: https://skia-review.googlesource.com/2752
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
In some build configurations (I think, GN, GCC 6, Debug) I get a warning that i is used unintialized. This likely has something to do with GCC correctly seeing that the SkTCast construction there is illegal aliasing, and perhaps thus "doesn't happen". Might be that if the SkTCast gets inlined, it decides its implementation is secretly kosher, and so Release builds don't see this. None of this happens with the GCCs we have on the bots... too old?
Instead use memcpy() here, which is well defined to do what we intended.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2758
Change-Id: Iaf5c75fbd852193b0b861bf5e71450502511d102
Reviewed-on: https://skia-review.googlesource.com/2758
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
We used to step at a 4-pixel stride as long as possible, then run up to 3 times, one pixel at a time. Now replace those 1-at-a-time runs with a single tail stamp if there are 1-3 remaining pixels.
This style is simply more efficient: e.g. we'll blend and lerp once for 3 pixels instead of 3 times. This should make short blits significantly more efficient. It's also more future-oriented... AVX+ on Intel and SVE on ARM support masked loads and stores, so we can do the entire tail in one direct step.
This also makes it possible to re-arrange the code a bit to encapsulate each stage better. I think generally this code reads more clearly than the old code, but YMMV. I've arranged things so you write one function, but it's compiled into two specializations, one for tail=0 (Body) and one for tail>0 (Tail). It's pretty tidy.
For now I've just burned a register to pass around tail. It's 2 bits now, maybe soon 3 with AVX, and capped at 4 for even the craziest new toys, so there are plenty of places we can pack it if we want to get clever.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2717
Change-Id: I45852a3e5d4c5b5e9315302c46601aee0d32265f
Reviewed-on: https://skia-review.googlesource.com/2717
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Today if you use the simple SK_RASTER_STAGE interface to build a pipeline, each stage you add calls into a next stage. The last stage you add calls into a special backstop stage JustReturn that, well, just returns, ending the pipeline.
This adds last(), which cuts that last stage off the pipeline. Instead, the stage you add using last() returns directly, ending the pipeline itself without jumping into JustReturn.
This reduces the overhead of using the pipelined version of SkRasterPipelineBench from ~25% to ~20% on my desktop.
Also, add docs.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2713
Change-Id: I11469378e2765c6e34db52eb3eef648d6612da3f
Reviewed-on: https://skia-review.googlesource.com/2713
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
It was not a fan of this (blatant) aliasing.
I suspect this best_non_simd_srcover_srgb_srgb() function has several
other aliasing issues that use undefined behavior, but this is all it's
complaining about for now.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2606
Change-Id: I25a8800e810bccf5068c8a10e9c8c8f565e57304
Reviewed-on: https://skia-review.googlesource.com/2606
Commit-Queue: Mike Klein <mtklein@chromium.org>
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Reason for revert:
Hitting an assert
Original issue's description:
> Support Float32 output from SkColorSpaceXform
>
> * Adds Float32 support to SkColorSpaceXform
> * Changes API to allows clients to ask for F32, updates clients to
> new API
> * Adds Sk4f_load4 and Sk4f_store4 to SkNx
> * Make use of new xform in SkGr.cpp
>
> BUG=skia:
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339233003
> CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
>
> Committed: https://skia.googlesource.com/skia/+/43d6651111374b5d1e4ddd9030dcf079b448ec47TBR=brianosman@google.com,mtklein@google.com,scroggo@google.com,mtklein@chromium.org,bsalomon@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review-Url: https://codereview.chromium.org/2347473007
* Adds Float32 support to SkColorSpaceXform
* Changes API to allows clients to ask for F32, updates clients to
new API
* Adds Sk4f_load4 and Sk4f_store4 to SkNx
* Make use of new xform in SkGr.cpp
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339233003
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Review-Url: https://codereview.chromium.org/2339233003
The SkFontData type is not exposed externally, so any method which uses
it can be updated to use smart pointers without affecting external
users. Updating this first will make updating the public API much
easier.
This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
appears that no one outside Skia is currently using SkStream::NewfromFile
so this is a good time to update it as well.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
Committed: https://skia.googlesource.com/skia/+/d8c2476a8b1e1e1a1771b17e8dd4db8645914f8c
Review-Url: https://codereview.chromium.org/2339273002
Reason for revert:
Killing Mac
Original issue's description:
> SkFontData to use smart pointers.
>
> The SkFontData type is not exposed externally, so any method which uses
> it can be updated to use smart pointers without affecting external
> users. Updating this first will make updating the public API much
> easier.
>
> This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
> std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
> appears that no one outside Skia is currently using SkStream::NewfromFile
> so this is a good time to update it as well.
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
>
> Committed: https://skia.googlesource.com/skia/+/d8c2476a8b1e1e1a1771b17e8dd4db8645914f8cTBR=mtklein@chromium.org,halcanary@google.com,mtklein@google.com,reed@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/2343933002
The SkFontData type is not exposed externally, so any method which uses
it can be updated to use smart pointers without affecting external
users. Updating this first will make updating the public API much
easier.
This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
appears that no one outside Skia is currently using SkStream::NewfromFile
so this is a good time to update it as well.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
Review-Url: https://codereview.chromium.org/2339273002
