Tests were previously dependent on the fact that drawBitmap calls were
using the legacy sprite blitters. Now these tests are blocking the
change that fixes drawBitmap behavior.
https://skia-review.googlesource.com/c/17923/
Bug: skia:
Change-Id: Ia9e5244243f18680d7593b0fa9de942dbbeeeb1d
Reviewed-on: https://skia-review.googlesource.com/18027
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Matt Sarett <msarett@google.com>
Bug: skia:6673
Change-Id: Ia2bae4f6a9039a007a10b6b45bcf2f0854bf6e5c
Reviewed-on: https://skia-review.googlesource.com/17794
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
We special case N32, but need to also handle f16
Change-Id: I0d6061d55e55c5952c740255e4600366d8d77919
Reviewed-on: https://skia-review.googlesource.com/17786
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
TBR=reed@google.com
(No change to the public API, but changed a header file)
SkWebpCodec:
- Implement onGetFrameCount, onGetFrameInfo, and onGetRepetitionCount
- Respect the alpha reported by libwebp. Although the spec states that
it is only a hint, the libwebp encoder uses it properly. Respecting
allows us to draw opaque images faster and decode them to 565. This
also matches other SkCodecs (and Chromium).
- onGetPixels:
- Decode the frame requested, recursively decoding required frame if
necessary
- When blending with a prior frame, use SkRasterPipeline
SkCodec:
- Move check for negative index to getFrameInfo
- Reset the colorXform if one is not needed
SkCodecAnimation:
- Add new blend enum, for WebP's (and APNG's) non-blending option
SkFrameHolder:
- New base classes for frames and the owner of the frames, allowing
code sharing between SkWebpCodec and SkGifCodec (particularly for
determining whether a frame has alpha and what frame it depends on)
- When moving items from SkGIFFrameContext, use Skia conventions (i.e.
int instead of unsigned)
- Rename "delay time" to "duration", to match e.g. SkFrameInfo::
fDuration
SkGifImageReader:
- Move pieces to SkFrameHolder, and adapt to changes made in the
process
- Make setAlphaAndRequiredFrame (now on the base class SkFrameHolder)
more general to support webp, and add support for frames that do not
blend
- Change SkGIFFrameContext from a struct to a class, to match how we
use the distinction elsewhere (i.e. struct is a small object with
public fields)
- Rework hasTransparentPixel (now hasTransparency, since it returns true
in some cases where there is not a transparent pixel) to better fit
with the modified setAlphaAndRequiredFrame. Also be more consistent
when there is no transparent pixel but no color map.
- Simplify an if condition that was previously simplified in 2d61e717
but accidentally got reverted in a4db9be6
CodecAnimTest:
- Test new animated webp files
- Rearrange the test to more cleanly print alpha type mismatches for
the first frame
resources:
- webp-animated.webp
- animated webp from Chromium
- blendBG.webp
- new webp file using bits of webp-animated-semitransparent4.webp
from Chromium
- tests required frame and alpha when using the non-blending mode
- frames have the following properties:
- Frame 0: no alpha, fills screen
- Frame 1: alpha, fills screen
- Frame 2: no alpha, fills screen
- Frame 3: alpha, fills screen, blendBG
- Frame 4: no alpha, fills screen, blendBG
- Frame 5: alpha, blendBG
- Frame 6: covers 4, has alpha, blendBG
- also used to test decoding to 565 if the new frame data has alpha
but blends onto an opaque frame
DM.cpp:
- Test animated images to non-native 8888 and unpremul
DMSrcSink.cpp:
- Do not test non-native 8888 decodes to f16 dst
- Test unpremul decodes to f16
- Copy a frame of an animated image prior to drawing, since in unpremul
mode, the DM code will premultiply first.
Bug: skia: 3315
Change-Id: I4e55ae2ee5bc095b37a743bdcfac644be603b980
Reviewed-on: https://skia-review.googlesource.com/16707
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-by: Matt Sarett <msarett@google.com>
Summary of the new world...
--image
CodecSrc and ImageGenSrc tests run on:
(1) 8888 with kIgnore transfer fn behavior
(2) srgb with kRespect transfer fn behavior
(3) f16
AndroidCodecSrc and BRDCodecSrc tests run on:
(1) 8888, since SkAndroidCodec always uses kIgnore
(2) f16, since android uses f16
--colorImage
ColorCodecSrc tests run on:
(1) 8888 in kBaseline mode, so we can see what the raw pixels look like
(2) srgb in color correct modes
(3) f16 in color correct modes
Bug: skia:
Change-Id: I65d1a04051da6f94bf5e48f7bc610f482870dc75
Reviewed-on: https://skia-review.googlesource.com/17396
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
This is fairly aggressive in that it will break any client
that is currently using SkImageGenerator with kIndex8.
I'm guessing that we don't have any clients doing that.
Bug: skia:6620
Change-Id: Ifd16f5232bb3a9f759c225315c57492d917ed9ca
Reviewed-on: https://skia-review.googlesource.com/16601
Commit-Queue: Matt Sarett <msarett@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Timing `out/dm --src gm --config srgb -w foo` on my desktop,
- wall time drops from 3.72 -> 2.17 seconds; and
- CPU time drops from 64.9 -> 27.9 seconds.
So again, close to 2x speedup.
(In exchange, the .pngs of our GMs grow from 57M to 73M.)
Change-Id: I6e2e8c8bda6371e857c8db41ca3119402a9056ae
Reviewed-on: https://skia-review.googlesource.com/16000
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This reverts commit d4a338f4d0.
Reason for revert: Looks like I missed something I was supposed to delete in Android.
Original change's description:
> Delete copyTo(Allocator), hide copyTo() behind flag
>
> Replace uses of copyTo() in Skia.
>
> Bug: skia:6464
> Change-Id: I921dc53a1c29a5176d18f05741f7c0b5a008e548
> Reviewed-on: https://skia-review.googlesource.com/14502
> Commit-Queue: Matt Sarett <msarett@google.com>
> Reviewed-by: Mike Reed <reed@google.com>
>
TBR=msarett@google.com,reed@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: I4d252940cc6a2462b030007055ea6c229471fc6e
Reviewed-on: https://skia-review.googlesource.com/14602
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
Replace uses of copyTo() in Skia.
Bug: skia:6464
Change-Id: I921dc53a1c29a5176d18f05741f7c0b5a008e548
Reviewed-on: https://skia-review.googlesource.com/14502
Commit-Queue: Matt Sarett <msarett@google.com>
Reviewed-by: Mike Reed <reed@google.com>
If/when we double check these settings we can either re-add these parameters or change the code manually.
The driving goal here is to shrink GrRenderTargetOpList.
Change-Id: I7819de18f97e8282e8754e3438130f797ebb3c37
Reviewed-on: https://skia-review.googlesource.com/14381
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This matches other Skia APIs. size_t was adopted from blink/
GIFImageReader.
Change-Id: Ic83e59f0942f597c4fb834e623acd9886ad483fe
Reviewed-on: https://skia-review.googlesource.com/13274
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Matt Sarett <msarett@google.com>
Reviewed-by: Chris Blume <cblume@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
guarded by SK_SUPPORT_OBSOLETE_LOCKPIXELS
needs https://codereview.chromium.org/2820873002/# to land first
Bug: skia:6481
Change-Id: I1c39902cbf6fe99f622adfa8192733b95f7fea09
Change-Id: I1c39902cbf6fe99f622adfa8192733b95f7fea09
Reviewed-on: https://skia-review.googlesource.com/13580
Reviewed-by: Florin Malita <fmalita@chromium.org>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Previosly, SkSize had a base class, which prevented it.
Also removes unused SkISize::clampNegToZero() and
SkSize::clampNegToZero().
Change-Id: I7b93b42f6f6381c66e294bbedee99ad53c6c3436
Reviewed-on: https://skia-review.googlesource.com/13187
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
Motivation: We may want to make SkMultiPictureDocument.h public in the
future.
Change-Id: Ie97b88d51a179c2283155d65bcadee32178115ca
Reviewed-on: https://skia-review.googlesource.com/11402
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Herb Derby <herb@google.com>
It can crash when the file length is an exact multiple of the page size.
When the file size is not an exact page size multiple,
SkData::MakeFromFileName() (i.e. mmap) happens to fill the rest with \0,
giving us a terminating \0 for free. SkStrSplit() uses this to stop.
When the file size is an exact page size multiple, there's no guaranteed
\0. We might find one on the next page immediately, eventually, or we
might just segfault. Whoops.
To fix, copy to an SkString which ought to plop in a \0 for us.
Change-Id: I51bbfdd85dfbb1c2276249d0255cf1c410ef9999
Reviewed-on: https://skia-review.googlesource.com/11409
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Fixes:
- create temp api for android to pass nullptr
- don't release and access sk_sp<SkData> at the same time in parameters
This reverts commit b14131c185.
Bug: skia:
Change-Id: Ic0e4f62520ba9f35455499ed30d306ad19d998a8
Reviewed-on: https://skia-review.googlesource.com/11129
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Matt Sarett <msarett@google.com>
This reverts commit 9920b10f52.
Reason for revert: trying to get details on w2k failure
https://chromium-swarm.appspot.com/task?id=354345d34ba3b310&refresh=10
Caught exception 3221225477 EXCEPTION_ACCESS_VIOLATION, was running:
unit test HugeBlurImageFilter
unit test FontNames
unit test Codec_PngRoundTrip
unit test ClampRange
unit test FontHost
unit test ColorMatrixFilter
f16 image scaled_codec_premul abnormal.wbmp
565 image brd_android_codec_divisor_0.167 interlaced3.png_0.167
unit test Codec_png
unit test ImageFilterBlurLargeImage
unit test FontObj
unit test DrawText
unit test GrShape
565 image brd_android_codec_divisor_0.333 interlaced2.png_0.333
unit test PathOpsOpCubicsThreaded
unit test PathOpsOpLoopsThreaded
unit test FontMgr
unit test ColorToHSVRoundTrip
unit test Image_Serialize_Encoding_Failure
Likely culprit:
unit test Image_Serialize_Encoding_Failure
step returned non-zero exit code: -1073741819
Original change's description:
> Revert[2] "clean up (partially) colortable api""
>
> This reverts commit 1d1165ca65.
>
> Bug: skia:
> Change-Id: Idbc0634ae3cec2e79f592d252de8751b077e6408
> Reviewed-on: https://skia-review.googlesource.com/11024
> Reviewed-by: Mike Reed <reed@google.com>
> Commit-Queue: Mike Reed <reed@google.com>
>
TBR=reed@google.com,reviews@skia.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: Ia4e73434b083224baa36092c69526c2f59bb16aa
Reviewed-on: https://skia-review.googlesource.com/11025
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit 2e491a6a11.
Reason for revert: Windows unit tests failing?
Original change's description:
> clean up (partially) colortable api
>
> Needs this to land: https://codereview.chromium.org/2789853002/
>
> Bug: skia:
> Change-Id: I38d916a546b7fa64d000d973e695ddda24a589e7
> Reviewed-on: https://skia-review.googlesource.com/10600
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Matt Sarett <msarett@google.com>
>
TBR=msarett@google.com,scroggo@google.com,reed@google.com,reviews@skia.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: I626e7edfcea82576a440dcaa851a04cedee6233f
Reviewed-on: https://skia-review.googlesource.com/10966
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
BUG=skia:
Change-Id: Ia0688876915cd773614ca0c4ccd467cf6e7c603e
Reviewed-on: https://skia-review.googlesource.com/10105
Commit-Queue: Matt Sarett <msarett@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Allow evaluation choice of Lazy or Eager evaluation for SkDeferredCanvas.
Eager is used for drawing to a non-recording canvas to reduce the number of
all operations.
Lazy is used for drawing to a recording canvas to reduce the amount decode/encode
that happens.
R=reed@google.com
Change-Id: I7837c4f6e5911c153e0796162e1170edbc34839e
Reviewed-on: https://skia-review.googlesource.com/9839
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Mike Reed <reed@google.com>
This reverts commit 73e21af213.
Reason for revert: I will fix the broken bot next week.
Original change's description:
> Revert "Add color spin test for SkColorSpaceXformCanvas"
>
> This reverts commit cb01aec63b.
>
> Reason for revert: Breaks Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Debug-SK_USE_DISCARDABLE_SCALEDIMAGECACHE
>
> Original change's description:
> > Add color spin test for SkColorSpaceXformCanvas
> >
> > Also changes behavior to treat nullptr srcs as sRGB.
> >
> > Testing locally, it looks like 353 gms have no diffs from 8888.
> > There are 269 diffs - some are fine (gms that do color space stuff)
> > and some are bugs.
> >
> > BUG=skia:
> >
> > Change-Id: I55c2825f4f4b857e0b0a0ec050c6db82ac881492
> > Reviewed-on: https://skia-review.googlesource.com/9738
> > Reviewed-by: Brian Osman <brianosman@google.com>
> > Commit-Queue: Matt Sarett <msarett@google.com>
> >
>
> TBR=mtklein@google.com,msarett@google.com,brianosman@google.com,reviews@skia.org
> # Not skipping CQ checks because original CL landed > 1 day ago.
> BUG=skia:
>
> Change-Id: I70bb69f747b863d267494e37a60888a51ab0184c
> Reviewed-on: https://skia-review.googlesource.com/9823
> Reviewed-by: Eric Boren <borenet@google.com>
> Commit-Queue: Eric Boren <borenet@google.com>
>
TBR=borenet@google.com,mtklein@google.com,msarett@google.com,reviews@skia.org,brianosman@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
BUG=skia:
Change-Id: I766382e6655f614042cded84f547f9fd5b109fca
Reviewed-on: https://skia-review.googlesource.com/9879
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This reverts commit cb01aec63b.
Reason for revert: Breaks Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Debug-SK_USE_DISCARDABLE_SCALEDIMAGECACHE
Original change's description:
> Add color spin test for SkColorSpaceXformCanvas
>
> Also changes behavior to treat nullptr srcs as sRGB.
>
> Testing locally, it looks like 353 gms have no diffs from 8888.
> There are 269 diffs - some are fine (gms that do color space stuff)
> and some are bugs.
>
> BUG=skia:
>
> Change-Id: I55c2825f4f4b857e0b0a0ec050c6db82ac881492
> Reviewed-on: https://skia-review.googlesource.com/9738
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Matt Sarett <msarett@google.com>
>
TBR=mtklein@google.com,msarett@google.com,brianosman@google.com,reviews@skia.org
# Not skipping CQ checks because original CL landed > 1 day ago.
BUG=skia:
Change-Id: I70bb69f747b863d267494e37a60888a51ab0184c
Reviewed-on: https://skia-review.googlesource.com/9823
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Eric Boren <borenet@google.com>
Also changes behavior to treat nullptr srcs as sRGB.
Testing locally, it looks like 353 gms have no diffs from 8888.
There are 269 diffs - some are fine (gms that do color space stuff)
and some are bugs.
BUG=skia:
Change-Id: I55c2825f4f4b857e0b0a0ec050c6db82ac881492
Reviewed-on: https://skia-review.googlesource.com/9738
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
TODO:
images
shaders
color filters
image filters
a couple stray color arrays
Change-Id: Ib91639bb0a6a00af737dd5186180011fe5120860
Reviewed-on: https://skia-review.googlesource.com/9529
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This should fix flakiness on the Win 2k8 bots.
BUG=skia:
Change-Id: Ibdd33279a092172f0b154493f59790a8db9f58bd
Reviewed-on: https://skia-review.googlesource.com/9142
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-by: Cary Clark <caryclark@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
Change-Id: Ieaa849bceba0e98e4c99491c721fe945a0694e68
Reviewed-on: https://skia-review.googlesource.com/9111
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Herb Derby <herb@google.com>
Reviewed-by: Stan Iliev <stani@google.com>
Commit-Queue: Derek Sollenberger <djsollen@google.com>
BUG=skia:
Change-Id: Ief7516c1505f8e447f83121ed4ba75b9fa9ba75b
Reviewed-on: https://skia-review.googlesource.com/8976
Commit-Queue: Matt Sarett <msarett@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Adds a bitfield to GrContextOptions that masks out path renderers.
Adds commandline flags support to set this bitfield in tools apps.
Removes GrGLInterfaceRemoveNVPR since we can now accomplish the same
thing in the context options.
BUG=skia:
Change-Id: Icf2a4df36374b3ba2f69ebf0db56e8aedd6cf65f
Reviewed-on: https://skia-review.googlesource.com/8786
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Also changes the behavior of these flags to only override their
corresponding context options when set, and to leave them unchanged
when not set.
BUG=skia:
Change-Id: I09f6be09997594fa888d9045dd4901354ef3f880
Reviewed-on: https://skia-review.googlesource.com/8780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
BUG=skia:
Change-Id: I4bc11042dd1dbf1eabd40af206027bc65acc3186
Reviewed-on: https://skia-review.googlesource.com/8444
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Matt Sarett <msarett@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
BUG=skia:
Change-Id: I01c5e1874c9a034febc64e25b3aaafb5050393a6
Reviewed-on: https://skia-review.googlesource.com/8021
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
Now requires a IXpsOMObjectFactory pointer. This will allow sandboxing
to be used in Chromium. (Chrome will create a IXpsOMObjectFactory, then
go into sandbox mode, then call SkDocumenent::MakeXPS().)
Change-Id: Ic4b48d4b148c44e188d12a9481fb74735546528a
Reviewed-on: https://skia-review.googlesource.com/8052
Reviewed-by: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
The weird foo_mains are no longer needed when we build with GN.
CQ_INCLUDE_TRYBOTS=skia.primary:Build-Mac-Clang-arm-Debug-iOS
Change-Id: Iae50696741e0dc277d96dda4968a1ae41cb17c8a
Reviewed-on: https://skia-review.googlesource.com/8064
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Stephan Altmueller <stephana@google.com>
A later CL will move all document-level fields and methods into
SkXPSDocument.
* SkXPSDocument cnstructor requires a xps factory ptr.
* All device layers share ownership of a single factory.
* renames SkDocument_XPS to the easier-to-say SkXPSDocument.
* Moves autocoinitialize to DM.
TODO: pipe the IXpsOMObjectFactory* into the SkDocument api.
No change in rendered documents.
Change-Id: I8a4680a3603951b1ce5f6c1de48714d4902061a9
Reviewed-on: https://skia-review.googlesource.com/7998
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
CQ_INCLUDE_TRYBOTS=skia.primary:Test-iOS-Clang-iPadMini4-GPU-GX6450-arm-Release
Change-Id: I7beadad742bc9444491c7a315a827297a636d70d
Reviewed-on: https://skia-review.googlesource.com/8049
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Testing premul f16 is enough test coverage, and we aren't doing
this correctly right now anyways (the drawing code assumes a
premul bitmap, we would need to premultiply after the unpremul
decode).
BUG=skia:
Change-Id: I798f56db67faadd0348974453a05cd726b9a509c
Reviewed-on: https://skia-review.googlesource.com/8020
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
I've only been running F16 tests in "colorImage" mode.
We really should be running our "image" tests to F16 as well - so
they can be tested with scaling, subsets, etc.
This CL fixes bugs so that we can enable those tests.
BUG=skia:
Change-Id: I8137eb4fce7ea12f2c9d233a029d946d4a63e6b0
Reviewed-on: https://skia-review.googlesource.com/7801
Commit-Queue: Matt Sarett <msarett@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
This is enough to run DM on my iPad.
I've tweaks DM so that it can run as built by both GN and GYP.
When we kill off GYP, all the dm_main() nonsense goes away.
CQ_INCLUDE_TRYBOTS=skia.primary:Test-iOS-Clang-iPadMini4-GPU-GX6450-Arm7-Debug,Build-Mac-Clang-arm64-Debug-GN_iOS
Change-Id: I59176bc203ee3180618b94ac5f9d291e0ad20b62
Reviewed-on: https://skia-review.googlesource.com/7757
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Hal Canary <halcanary@google.com>
The only difference is that we now also put the guard flag
SK_SUPPORT_LEGACY_AAA in SkUserConfig.h. Previously, SkAnalyticEdge.cpp doesn't
get that flag from SkScan.h and that caused many problems.
BUG=skia:
TBR=reed@google.com,caryclark@google.com
Change-Id: I134bb76cebd6fffa712f438076668765321bba3b
Reviewed-on: https://skia-review.googlesource.com/6992
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
This reverts commit b46fff60bc.
Reason for revert: possible chromium cc unit tests failure
Change-Id: Ie174c55e4d0fc3ae45854b5897ba26b7ad5a9c13
Reviewed-on: https://skia-review.googlesource.com/6981
Commit-Queue: Yuqian Li <liyuqian@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
The only difference is that we now put the guard flag SK_SUPPORT_LEGACY_AAA in
SkUserConfig.h instead of SkScan.h. Previously, SkAnalyticEdge.cpp doesn't get
that flag from SkScan.h and that caused many problems.
BUG=skia:
TBR=reed@google.com,caryclark@google.com
Change-Id: I7b89d3cb64ad71715101d2a5e8e77be3a8a6fa16
Reviewed-on: https://skia-review.googlesource.com/6972
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
This reverts commit 89a0e72287.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Implement Analytic AA for General Paths (with Guard against Chrome)
>
> I've set up a SK_SUPPORT_LEGACY_AAA flag to guard against Chromium layout tests. I also set that flag in this CL so theoretically this CL won't trigger any GM changes. I'll use this to verify my guard, and remove that flag and actually enables concave AAA in a future CL.
>
> When enabled, for most simple concave paths (e.g., rectangle stroke, rrect stroke, sawtooth, stars...), the Analytic AA achieves 1.3x-2x speedup, and they look much prettier. And they probably are the majority in our use cases by number. But they probably are not the majority by time cost; a single complicated path may cost 10x-100x more time to render than a rectangle stroke... For those complicated paths, we fall back to supersampling by default as we're likely to be 1.1-1.2x slower and the quality improvement is not visually significant. However, one can use gSkForceAnalyticAA to disable that fallback.
>
> BUG=skia:
>
> Change-Id: If9549a3acc4a187cfaf7eb51890c148da3083d31
> Reviewed-on: https://skia-review.googlesource.com/6091
> Reviewed-by: Mike Reed <reed@google.com>
> Commit-Queue: Yuqian Li <liyuqian@google.com>
>
TBR=caryclark@google.com,liyuqian@google.com,reed@google.com
BUG=skia:
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: I13c05aaa1bcb14956bd0fe01bb404e41be75af22
Reviewed-on: https://skia-review.googlesource.com/6961
Commit-Queue: Yuqian Li <liyuqian@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
I've set up a SK_SUPPORT_LEGACY_AAA flag to guard against Chromium layout tests. I also set that flag in this CL so theoretically this CL won't trigger any GM changes. I'll use this to verify my guard, and remove that flag and actually enables concave AAA in a future CL.
When enabled, for most simple concave paths (e.g., rectangle stroke, rrect stroke, sawtooth, stars...), the Analytic AA achieves 1.3x-2x speedup, and they look much prettier. And they probably are the majority in our use cases by number. But they probably are not the majority by time cost; a single complicated path may cost 10x-100x more time to render than a rectangle stroke... For those complicated paths, we fall back to supersampling by default as we're likely to be 1.1-1.2x slower and the quality improvement is not visually significant. However, one can use gSkForceAnalyticAA to disable that fallback.
BUG=skia:
Change-Id: If9549a3acc4a187cfaf7eb51890c148da3083d31
Reviewed-on: https://skia-review.googlesource.com/6091
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
* SkAutoFree moved to SkTemplates.h (now implmented with unique_ptr).
* SkAutoMalloc and SkAutoSMalloc moved to SkAutoMalloc.h
* "SkAutoFree X(sk_malloc_throw(N));" --> "SkAutoMalloc X(N);"
Revert "Revert 'SkTypes.h : move SkAutoMalloc into SkAutoMalloc.h'"
This reverts commit c456b73fef.
Change-Id: Ie2c1a17c20134b8ceab85a68b3ae3e61c24fbaab
Reviewed-on: https://skia-review.googlesource.com/6886
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
* SkAutoFree moved to SkTemplates.h (now implmented with unique_ptr).
* SkAutoMalloc and SkAutoSMalloc moved to SkAutoMalloc.h
* "SkAutoFree X(sk_malloc_throw(N));" --> "SkAutoMalloc X(N);"
Change-Id: Idacd86ca09e22bf092422228599ae0d9bedded88
Reviewed-on: https://skia-review.googlesource.com/4543
Reviewed-by: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
This code involves Skia having knowledge of HWUI internals and
causes problems with various build systems. It is also not
currently being used and is therefore expendable.
Change-Id: I7b6a37fa4c9afcefbc6a957b49e7735da872ff14
Reviewed-on: https://skia-review.googlesource.com/6597
Commit-Queue: Derek Sollenberger <djsollen@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Change-Id: I80f951976558a284e55386e0a368f08bd835d8ca
Reviewed-on: https://skia-review.googlesource.com/6359
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Before my recent CL, these were not run at all (because the decode
color type was gray and the bitmap color type was alpha).
https://skia-review.googlesource.com/c/6088/
Now that these are being run, we should mark the bitmap as
gray so they draw correctly.
BUG=skia:
Change-Id: I9bdfe97671a60da2bcbef55377e1c1b2bd326f8f
Reviewed-on: https://skia-review.googlesource.com/6160
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
I accidentally turned these off in:
https://skia-review.googlesource.com/c/6023/
Even though the decode color type does not match the canvas,
we still want to run the test.
BUG=skia:
Change-Id: Ia96069a44e20d62a58d37a98bac81cfab5470fc0
Reviewed-on: https://skia-review.googlesource.com/6088
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
Prior to this CL, if a GIF file was truncated before reading the local
color map of a frame, incremental decode would do the wrong thing. In
onStartIncrementalDecode, we would either create a color table based on
the global color map, or we would create a dummy one with only one
color (transparent). The dummy color table is correct if there is
neither a global nor a local color map, and allows us to fill the frame
with transparent. But if more data is provided, and it includes an
actual color map and image data, one of the following can happen:
- If the created color table is smaller than the actual one, the
decoded data may include indices outside of the range of the created
color table, resulting in a crash.
- If we get lucky, and the created color table is large enough, it may
still be the wrong colors (and most likely is).
To solve this, make onStartIncrementalDecode fail if there is a local
color map that has not been read yet. A future call may read more data
and read the correct color map.
This is done by returning kIncompleteInput in
SkGifCodec::prepareToDecode if there is a local color map that has not
yet been read. (It is possible that there is no color map at all, in
which case we still need to support decoding that frame. Skip
attempting to decode in that case.)
In onGetPixels, if prepareToDecode returned kIncompleteInput, return
kInvalidInput. Although the input is technically incomplete, no future
call will provide more data (unlike in incremental decoding), and there
is nothing interesting for the client to draw. This also prevents
SkCodec from attempting to fill the data with an SkSwizzler, which has
not been created. (An alternative solution would be create the dummy
color table and an SkSwizzler, which would keep the current behavior.
But I think the new behavior of returning kInvalidInput makes more
sense.)
Add tests to verify the intended behavior:
- getPixels fails.
- startIncrementalDecode fails, but after providing more data it will
succeed and incremental decoding matches the image decoded from the
full stream.
- Both succeed if there is no color table at all.
Change-Id: Ifb52fe7f723673406a28e80c8805a552f0ac33b6
Reviewed-on: https://skia-review.googlesource.com/5758
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Currently, just inject the Ganesh context type when running unit tests.
Obviously, we can use this to supply other contextual information around
tests that do many variations of configs, formats, etc...
BUG=skia:
Change-Id: Iab96632a92ec632e4d132bbcc17a91a8dd251e78
Reviewed-on: https://skia-review.googlesource.com/5565
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
BUG=skia:
Change-Id: Id66a68e47f671cafd7c6128787fbd149faf16c7a
Reviewed-on: https://skia-review.googlesource.com/5576
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Changed ICC parsing/SkGammas/SkColorLookUpTable to handle non-3-channel
inputs. Parsed CMYK A2B ICC profiles. Integrated this with SkJpegCodec
(the only file that supports CMYK) and SkColorSpaceXform_A2B to allow
parsing and color xforming of ICC CMYK images.
CQ_INCLUDE_TRYBOTS=skia.primary:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD
Change-Id: I11e3d17180244281be3eb43fd608609925a7f71e
Reviewed-on: https://skia-review.googlesource.com/5444
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
This reverts commit 51c3fcd376.
Reason for revert: ASAN, MSAN both take issue with parse_and_load_gamma()
Original change's description:
> Added CMYK support for ICC profiles.
>
> Changed ICC parsing/SkGammas/SkColorLookUpTable to handle non-3-channel
> inputs. Parsed CMYK A2B ICC profiles. Integrated this with SkJpegCodec
> (the only file that supports CMYK) and SkColorSpaceXform_A2B to allow
> parsing and color xforming of ICC CMYK images.
>
> BUG=skia:
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=5197
> CQ_INCLUDE_TRYBOTS=skia.primary:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD
>
>
> Change-Id: Id6619f63f04071f79cd2d84321857dfa269ad3aa
> Reviewed-on: https://skia-review.googlesource.com/5197
> Commit-Queue: Mike Klein <mtklein@chromium.org>
> Reviewed-by: Matt Sarett <msarett@google.com>
> Reviewed-by: Mike Klein <mtklein@chromium.org>
> Reviewed-by: Leon Scroggins <scroggo@google.com>
>
TBR=mtklein@chromium.org,mtklein@google.com,msarett@google.com,scroggo@google.com,brianosman@google.com,raftias@google.com,reviews@skia.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: Ib43fef00bc233c0b4fa47ed29040d69601def267
Reviewed-on: https://skia-review.googlesource.com/5423
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Changed ICC parsing/SkGammas/SkColorLookUpTable to handle non-3-channel
inputs. Parsed CMYK A2B ICC profiles. Integrated this with SkJpegCodec
(the only file that supports CMYK) and SkColorSpaceXform_A2B to allow
parsing and color xforming of ICC CMYK images.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=5197
CQ_INCLUDE_TRYBOTS=skia.primary:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD
Change-Id: Id6619f63f04071f79cd2d84321857dfa269ad3aa
Reviewed-on: https://skia-review.googlesource.com/5197
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Matt Sarett <msarett@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Change-Id: I27b6324f8040899fafeda23ca524bc54a4dbf090
Reviewed-on: https://skia-review.googlesource.com/5392
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
(re-land 248ff02 & 2cb6cb7, with changes)
- Hide SkImageEncoder class in private header.
- SkImageEncoder::Type becomes SkEncodedImageFormat
- SkEncodedFormat becomes SkEncodedImageFormat
- SkImageEncoder static functions replaced with
single function EncodeImage()
- utility wrappers for EncodeImage() are in
sk_tool_utils.h
TODO: remove link-time registration mechanism.
TODO: clean up clients use of API and flip the flag.
TODO: implement EncodeImage() in chromeium/skia/ext
Change-Id: I47d451e50be4d5c6c130869c7fa7c2857243d9f0
Reviewed-on: https://skia-review.googlesource.com/4909
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-on: https://skia-review.googlesource.com/5186
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Hal Canary <halcanary@google.com>
- Hide SkImageEncoder class in private header.
- SkImageEncoder::Type becomes SkEncodedImageFormat
- SkEncodedFormat becomes SkEncodedImageFormat
- SkImageEncoder static functions replaced with
single function EncodeImage()
- utility wrappers for EncodeImage() are in
sk_tool_utils.h
TODO: remove link-time registration mechanism.
TODO: clean up clients use of API and flip the flag.
TODO: implement EncodeImage() in chromeium/skia/ext
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4909
Change-Id: Ib48b31fdc05cf23cda7f56ebfd67c841c149ce70
Reviewed-on: https://skia-review.googlesource.com/4909
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
This reverts commit 8240750718.
Reason for revert: Breaking WebView (chromium:663959)
Original change's description:
> Change SkCanvas to *not* inherit from SkRefCnt
>
> Definitely tricky for classes like SkNWayCanvas, where the caller (today)
> need not pay attention to ownership of the canvases it gave the NWay
> (after this CL, the caller *must* managed ownership)
>
> BUG=skia:
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4441
>
> DOCS_PREVIEW= https://skia.org/?cl=4441
>
> Change-Id: Ib1ac07a3cdf0686d78e7aaa4735d45cc90bea081
> Reviewed-on: https://skia-review.googlesource.com/4441
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Florin Malita <fmalita@chromium.org>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
>
TBR=djsollen@google.com,mtklein@google.com,halcanary@google.com,robertphillips@google.com,fmalita@chromium.org,fmalita@google.com,reed@google.com,reviews@skia.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: I5e3b3e876b7d2c09833cf841801321033b6b968b
Reviewed-on: https://skia-review.googlesource.com/4687
Commit-Queue: Heather Miller <hcm@google.com>
Reviewed-by: Heather Miller <hcm@google.com>
Definitely tricky for classes like SkNWayCanvas, where the caller (today)
need not pay attention to ownership of the canvases it gave the NWay
(after this CL, the caller *must* managed ownership)
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4441
DOCS_PREVIEW= https://skia.org/?cl=4441
Change-Id: Ib1ac07a3cdf0686d78e7aaa4735d45cc90bea081
Reviewed-on: https://skia-review.googlesource.com/4441
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Reviewed-by: Robert Phillips <robertphillips@google.com>
It is moved to src/utils. It is almost a tool, but has two uses in
src/ports.
The existing SkOSFile.cpp is left empty for the time being since it is
mentioned in Chromium's BUILD.gn for Skia.
Change-Id: I3bb7f7c4214359eb6ab906bfe76737d20bf1d6c7
Reviewed-on: https://skia-review.googlesource.com/4536
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Ben Wagner <bungeman@google.com>
"Remove SkAutoTDelete." did not run trybots on these specific bots.
Change-Id: Ibfa731df387a90a78187b88c75483800981a691c
Reviewed-on: https://skia-review.googlesource.com/4387
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Replace with std::unique_ptr.
Change-Id: I5806cfbb30515fcb20e5e66ce13fb5f3b8728176
Reviewed-on: https://skia-review.googlesource.com/4381
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Our internal definition is (and will continue to be) that anything with
a color space is gamma correct. F16 is irrelevant (whether or not we
choose to support untagged F16). This makes these helpers less than
helpful, and lets us remove them from (public) API.
API change is just removal (of unused functions).
TBR=reed@google.com
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4228
Change-Id: Ia84a423548bfee14a3ba4a43d6d5b8c4686fb5ff
Reviewed-on: https://skia-review.googlesource.com/4228
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
This was always intended to be a temporary dependency to use for
testing. It has served its purpose.
Also, this has already been dropped (accidentally, I think) by
the new GN build.
TBR=reed@google.com
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4220
Change-Id: Ic72ee08bbfaf86ed86a4122fd38be2921eb1327e
Reviewed-on: https://skia-review.googlesource.com/4220
Reviewed-by: Matt Sarett <msarett@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
This also makes the required changed to src, tests, and tools. The few
public APIs modified by this change appear to be unused outside of Skia.
Removing these from the public API makes it easier to ensure users are
no longer using them.
This also updates GrGpu::wrapBackendXXX and the
::onWrapBackendXXX methods to clarify ownership.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2448593002
Review-Url: https://codereview.chromium.org/2448593002
565 cannot take the !writeTransparentPixels path, so disable it for
cases where we might have to take that path.
This only affects frames beyond the first. If the first frame has
a transparent pixel, it will be marked as non-opaque, so we cannot
decode to 565 anyway.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2441833002
Review-Url: https://codereview.chromium.org/2441833002
Prior to this CL, a kAnimated_Mode CodecSrc (which draws a strip of
all frames in an image) has the same name as a non-animated one. This
means that Gold compares the two. Someone triaging will see two very
different images (a strip versus a single image) and think one of them
is wrong.
With this change, the two will have different names so they will not
be compared with one another.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2446543003
Review-Url: https://codereview.chromium.org/2446543003
This doesn't print a backtrace, but it's better than nothing.
By preserving the original signal handler and calling into that, we keep the Android system stack trace, visible in logcat, the "dump log" step on bots.
Tested locally on Mac and Android by making an arbitrary GM segfault.
BUG=skia:5876
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3860
Change-Id: Ia7a962ca50e09d370423a6106033e34c47d7643d
Reviewed-on: https://skia-review.googlesource.com/3860
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Add an interface to decode frames beyond the first in SkCodec, and
add an implementation for SkGifCodec.
Add getFrameData to SkCodec. This method reads ahead in the stream
to return a vector containing meta data about each frame in the image.
This is not required in order to decode frames beyond the first, but
it allows a client to learn extra information:
- how long the frame should be displayed
- whether a frame should be blended with a prior frame, allowing the
client to provide the prior frame to speed up decoding
Add a new fields to SkCodec::Options:
- fFrameIndex
- fHasPriorFrame
The API is designed so that SkCodec never caches frames. If a
client wants a frame beyond the first, they specify the frame in
Options.fFrameIndex. If the client does not have the
frame's required frame (the frame that this frame must be blended on
top of) cached, they pass false for
Options.fHasPriorFrame. Unless the frame is
independent, the codec will then recursively decode all frames
necessary to decode fFrameIndex. If the client has the required frame
cached, they can put it in the dst they pass to the codec, and the
codec will only draw fFrameIndex onto it.
Replace SkGifCodec's scanline decoding support with progressive
decoding, and update the tests accordingly.
Implement new APIs in SkGifCodec. Instead of using gif_lib, use
GIFImageReader, imported from Chromium (along with its copyright
headers) with the following changes:
- SkGifCodec is now the client
- Replace blink types
- Combine GIFColorMap::buildTable and ::getTable into a method that
creates and returns an SkColorTable
- Input comes from an SkStream, instead of a SegmentReader. Add
SkStreamBuffer, which buffers the (potentially partial) stream in
order to decode progressively.
(FIXME: This requires copying data that previously was read directly
from the SegmentReader. Does this hurt performance? If so, can we
fix it?)
- Remove UMA code
- Instead of reporting screen width and height to the client, allow the
client to query for it
- Fail earlier if the first frame AND screen have size of zero
- Compute required previous frame when adding a new one
- Move GIFParseQuery from GIFImageDecoder to GIFImageReader
- Allow parsing up to a specific frame (to skip parsing the rest of the
stream if a client only wants the first frame)
- Compute whether the first frame has alpha and supports index 8, to
create the SkImageInfo. This happens before reporting that the size
has been decoded.
Add GIFImageDecoder::haveDecodedRow to SkGifCodec, imported from
Chromium (along with its copyright header), with the following changes:
- Add support for sampling
- Use the swizzler
- Keep track of the rows decoded
- Do *not* keep track of whether we've seen alpha
Remove SkCodec::kOutOfOrder_SkScanlineOrder, which was only used by GIF
scanline decoding.
Call onRewind even if there is no stream (SkGifCodec needs to clear its
decoded state so it will decode from the beginning).
Add a method to SkSwizzler to access the offset into the dst, taking
subsetting into account.
Add a GM that animates a GIF.
Add tests for the new APIs.
*** Behavior changes:
* Previously, we reported that an image with a subset frame and no transparent
index was opaque and used the background index (if present) to fill the
background. This is necessary in order to support index 8, but it does not
match viewers/browsers I have seen. Examples:
- Chromium and Gimp render the background transparent
- Firefox, Safari, Linux Image Viewer, Safari Preview clip to the frame (for
a single frame image)
This CL matches Chromium's behavior and renders the background transparent.
This allows us to have consistent behavior across products and simplifies
the code (relative to what we would have to do to continue the old behavior
on Android). It also means that we will no longer support index 8 for some
GIFs.
* Stop checking for GIFSTAMP - all GIFs should be either 89a or 87a.
This matches Chromium. I suspect that bugs would have been reported if valid
GIFs started with "GIFVER" instead of "GIF89a" or "GIF87a" (but did not decode
in Chromium).
*** Future work not included in this CL:
* Move some checks out of haveDecodedRow, since they are the same for the
entire frame e.g.
- intersecting the frameRect with the full image size
- whether there is a color table
* Change when we write transparent pixels
- In some cases, Chromium deemed this unnecessary, but I suspect it is slower
than the fallback case. There will continue to be cases where we should
*not* write them, but for e.g. the first pass where we have already
cleared to transparent (which we may also be able to skip) writing the
transparent pixels will not make anything incorrect.
* Report color type and alpha type per frame
- Depending on alpha values, disposal methods, frame rects, etc, subsequent
frames may have different properties than the first.
* Skip copies of the encoded data
- We copy the encoded data in case the stream is one that cannot be rewound,
so we can parse and then decode (possibly not immediately). For some input
streams, this is unnecessary.
- I was concerned this cause a performance regression, but on average the
new code is faster than the old for the images I tested [1].
- It may cause a performance regression for Chromium, though, where we can
always move back in the stream, so this should be addressed.
Design doc:
https://docs.google.com/a/google.com/document/d/12Qhf9T92MWfdWujQwCIjhCO3sw6pTJB5pJBwDM1T7Kc/
[1] https://docs.google.com/a/google.com/spreadsheets/d/19V-t9BfbFw5eiwBTKA1qOBkZbchjlTC5EIz6HFy-6RI/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=2045293002
Review-Url: https://codereview.chromium.org/2045293002
Matches our naming convention for all other types - factories that
return sk_sp (or any type that intelligently manages its own
lifetime) are named Make.
Previous factories are still around, assuming
SK_SUPPORT_LEGACY_COLOR_SPACE_FACTORIES is defined. Enable that
define for Android, etc.
See also: https://codereview.chromium.org/2442053002/
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3822
Change-Id: Iaea9376490736b494e8ffc820831f052bbe1478d
Reviewed-on: https://skia-review.googlesource.com/3822
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
(1) The transformation code *should* support any src SkColorSpace
that we successfully parse. This is agreed upon internally and
by clients. The fact that we currently don't is just a bug...
(2) We cannot and will not support all SkColorSpaces as dsts.
So if we fail to make a SkColorSpaceXform, we should assume that
it was caused by a bad dst color space. The correct response in
this case is to return kInvalidConversion. I've rewritten the CL
to do this.
The fact that weird src spaces will sometimes trigger a
kInvalidConversion is just a bug that is being actively worked on.
TBR=reed@google.com
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3661
Change-Id: Iac2b45120507ec71b1b3d555c61931f7348dad9e
Reviewed-on: https://skia-review.googlesource.com/3661
Commit-Queue: Matt Sarett <msarett@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-by: Robert Aftias <raftias@google.com>
The refactoring breaks off A2B0 tag support into a separate
subclass of SkColorSpace_Base, while keeping the current
(besides CLUT) functionality in a XYZTRC subclass.
ICC profile loading is now aware of this and creates the A2B0
subclass when SkColorSpace::NewICC() is called on a profile
in need of the A2B0 functionality.
The LabPCSDemo GM loads a .icc profile containing a LAB PCS and
then runs a Lab->XYZ conversion on an image using it so we can
display it and test out the A2B0 SkColorSpace functionality,
sans a/b/m-curves, as well as the Lab->XYZ conversion code.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2389983002
Review-Url: https://codereview.chromium.org/2389983002
It will now reside in SkColorSpace_Base. Future work for SkColorSpace
will cause this function to not be desirable or sensible to call on
all SkColorSpaces. Call sites were changed to make a kSRGBLinear_Named
instead of kSRGB_Named -> makeLinearGamma() (the majority of cases),
and if that was not possible, SkColorSpace_Base::makeLinearGamma()
was called instead.
TBR=reed@google.com
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2412613005
Review-Url: https://codereview.chromium.org/2412613005
- perform version check in CreateProc for XfermodeImageFilter and ArithmeticImageFilter
This reverts commit 3ed485f424.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2992
Change-Id: Ib4a154cdd5f5d1dcac921ef50d53b79a2d6a1be8
Reviewed-on: https://skia-review.googlesource.com/2992
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
I also had to cut it down to just a global atomic bool... as a field in a global singleton accessed through instance(), it's very hard to make threadsafe.
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Ubuntu-Clang-GCE-CPU-AVX2-x86_64-Release-TSAN-Trybot
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2937
Change-Id: If80be987906dd521fbe644d1d0d577009f06d0e3
Reviewed-on: https://skia-review.googlesource.com/2937
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
- Set fDstInfo and fOptions in getPixels(). This may not be necessary
for all implementations, but it simplifies things for SkPngCodec.
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Review-Url: https://codereview.chromium.org/1997703003
The SkFontData type is not exposed externally, so any method which uses
it can be updated to use smart pointers without affecting external
users. Updating this first will make updating the public API much
easier.
This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
appears that no one outside Skia is currently using SkStream::NewfromFile
so this is a good time to update it as well.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
Committed: https://skia.googlesource.com/skia/+/d8c2476a8b1e1e1a1771b17e8dd4db8645914f8c
Review-Url: https://codereview.chromium.org/2339273002
Reason for revert:
Killing Mac
Original issue's description:
> SkFontData to use smart pointers.
>
> The SkFontData type is not exposed externally, so any method which uses
> it can be updated to use smart pointers without affecting external
> users. Updating this first will make updating the public API much
> easier.
>
> This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
> std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
> appears that no one outside Skia is currently using SkStream::NewfromFile
> so this is a good time to update it as well.
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
>
> Committed: https://skia.googlesource.com/skia/+/d8c2476a8b1e1e1a1771b17e8dd4db8645914f8cTBR=mtklein@chromium.org,halcanary@google.com,mtklein@google.com,reed@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/2343933002
The SkFontData type is not exposed externally, so any method which uses
it can be updated to use smart pointers without affecting external
users. Updating this first will make updating the public API much
easier.
This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
appears that no one outside Skia is currently using SkStream::NewfromFile
so this is a good time to update it as well.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
Review-Url: https://codereview.chromium.org/2339273002
Reason for revert:
Broken perf bots
Original issue's description:
> Checking for valid colorType, alphaType, colorSpace in SkCodec
>
> * Refactor to share code between SkPngCodec and SkWebpCodec
> * Didn't end up sharing with SkJpegCodec but did refactor
> that code a bit
> * Disallow conversions to F16 with non-linear color spaces
> * Fail to decode if we fail to create a SkColorSpaceXform
> (should be an assert soon). We used to fallback on a
> legacy decode if we failed to create the transform.
> * A bunch of name changes
>
> BUG=skia:
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2319293003
>
> Committed: https://skia.googlesource.com/skia/+/7a9900d6d34e437bb24beb5524a1f6488ae138c9TBR=scroggo@google.com,brianosman@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review-Url: https://codereview.chromium.org/2328663002
* Refactor to share code between SkPngCodec and SkWebpCodec
* Didn't end up sharing with SkJpegCodec but did refactor
that code a bit
* Disallow conversions to F16 with non-linear color spaces
* Fail to decode if we fail to create a SkColorSpaceXform
(should be an assert soon). We used to fallback on a
legacy decode if we failed to create the transform.
* A bunch of name changes
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2319293003
Review-Url: https://codereview.chromium.org/2319293003
Verify the rules that we're converging on for surfaces:
- For 8888, we only support sRGB-like gamma, or no color space at all.
- For F16, we require a color space, with linear gamma.
- For all other formats, we do not support color spaces.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2270823002
Review-Url: https://codereview.chromium.org/2270823002
SkLiteRecorder, a new SkCanvas, fills out SkLiteDL, a new SkDrawable.
This SkDrawable is a display list similar to SkRecord and SkBigPicture / SkRecordedDrawable, but with a few new design points inspired by Android and slimming paint:
1) SkLiteDL is structured as one big contiguous array rather than the two layer structure of SkRecord. This trades away flexibility and large-op-count performance for better data locality for small to medium size pictures.
2) We keep a global freelist of SkLiteDLs, both reusing the SkLiteDL struct itself and its contiguous byte array. This keeps the expected number of mallocs per display list allocation <1 (really, ~0) for cyclical use cases.
These two together mean recording is faster. Measuring against the code we use at head, SkLiteRecorder trends about ~3x faster across various size pictures, matching speed at 0 draws and beating the special-case 1-draw pictures we have today. (I.e. we won't need those special case implementations anymore, because they're slower than this new generic code.) This new strategy records 10 drawRects() in about the same time the old strategy took for 2.
This strategy stays the winner until at least 500 drawRect()s on my laptop, where I stopped checking.
A simpler alternative to freelisting is also possible (but not implemented here), where we allow the client to manually reset() an SkLiteDL for reuse when its refcnt is 1. That's essentially what we're doing with the freelist, except tracking what's available for reuse globally instead of making the client do it.
This code is not fully capable yet, but most of the key design points are there. The internal structure of SkLiteDL is the area I expect to be most volatile (anything involving Op), but its interface and the whole of SkLiteRecorder ought to be just about done.
You can run nanobench --match picture_overhead as a demo. Everything it exercises is fully fleshed out, so what it tests is an apples-to-apples comparison as far as recording costs go. I have not yet compared playback performance.
It should be simple to wrap this into an SkPicture subclass if we want.
I won't start proposing we replace anything old with anything new quite yet until I have more ducks in a row, but this does look pretty promising (similar to the SkRecord over old SkPicture change a couple years ago) and I'd like to land, experiment, iterate, especially with an eye toward Android.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2213333002
Review-Url: https://codereview.chromium.org/2213333002
This builds, links, and runs on Linux. Have not tried Mac.
I've tested is_debug={true,false} and is_component_build.
It's neat that the component build DM works, but it's also an indication I've missed an essential flag or two... it shouldn't work. :)
The GPU backend isn't working yet, but all the software configurations I've tried look good.
This fleshes out all the other parts of SkCodec too... I noticed we weren't able to decode gifs or webp.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2188643002
Review-Url: https://codereview.chromium.org/2188643002
201295.jpg on HP z620
(300x280, most common form of sRGB profile)
QCMS Xform 0.495 ms
Skia Old Xform 0.235 ms
Skia NEW Xform 0.423 ms
Vs Old Code 0.56x
Vs QCMS 1.17x
So to summarize, we are now much slower than before,
but still a bit faster than QCMS. And now we are also
far more accurate than QCMS :).
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2060823003
CQ_EXTRA_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Review-Url: https://codereview.chromium.org/2060823003
Instead of two synchronization systems (in_signal_handler, gMutex),
we can just use one. This simplifies the signal handler logic to:
- first thread through grabs the lock, prints what's running and a stack trace,
then exits
- all other threads just sit waiting on that lock until exit kills them
Previously I think all threads were racing to exit, which can kill the process
before the printing thread is done. That truncated the output, which is dumb.
Plus...
refactor slightly so that crash_handler() shows up at the top of the stack
trace rather than some odd name for a lambda inside setup_crash_handler().
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2051863002
Review-Url: https://codereview.chromium.org/2051863002
$ git grep -l '<windows.h>' include src
include/private/SkLeanWindows.h
$ git grep -l SkLeanWindows.h | grep '\.h$'
include/ports/SkTypeface_win.h
include/utils/win/SkHRESULT.h
include/utils/win/SkTScopedComPtr.h
include/views/SkEvent.h
src/core/SkMathPriv.h
src/ports/SkTypeface_win_dw.h
src/utils/SkThreadUtils_win.h
src/utils/win/SkWGL.h
The same for `#include <intrin.h>` that was found in SkMath.h.
Those functions that needed it are moved to SkMathPriv.h.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2041943002
CQ_INCLUDE_TRYBOTS=tryserver.chromium.win:win_chromium_compile_dbg_ng,win_chromium_compile_rel_ng
Review-Url: https://codereview.chromium.org/2041943002
Reason for revert:
Still causing problems in Google3, e.g.
https://test.corp.google.com/ui#cl=124138817&flags=CAMQBQ==&id=OCL:124138817:BASE:124139560:1465227435491:219ffbdb&t=//third_party/skia/HEAD:dm
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
>
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965
>
> Committed: https://skia.googlesource.com/skia/+/6fb2391b2cc83ee2160b4e994faa8128975acc1fTBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=skia:4211
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2044573002
Review-Url: https://codereview.chromium.org/2044573002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
Still breaking Google3 e.g.:
https://sponge.corp.google.com/target?id=9261d31b-34fc-4f0f-981e-f92f7c5cea2c&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1
https://test.corp.google.com/ui#cl=123773095&flags=CAMQBQ==&id=OCL:123773095:BASE:123773415:1464804876959:b0ea9b1c&t=//third_party/skia/HEAD:dm
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
>
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965TBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Review-Url: https://codereview.chromium.org/2026383002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
This is failing tests and then crashing on Google3 [1]. The crashes are fixed by crrev.com/2026873002, but to fix the builder we'll need to upgrade its version of libpng.
[1] https://sponge.corp.google.com/target?id=e545ef55-4da4-4931-9524-1ac92acb61b1&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539eTBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Review-Url: https://codereview.chromium.org/2023103002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Review-Url: https://codereview.chromium.org/1997703003
This will allow me to test and visualize some assumptions
on parsing and applying color profiles. Also, it should
help me find and fix bugs.
This is certainly not an optimized implementation, and, as
far as I know, it doesn't take any shortcuts to improve
performance. We'll probably want to do both of these
once we know where it fits in the pipeline.
Right now this test is only run on an arbitrary set of ~100
images from the top 10k skps. I'll continue to add more
"interesting" images and probably tweak the code as
necessary.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1995233003
Review-Url: https://codereview.chromium.org/1995233003
When decoding to 565 or Gray, allow the client to incorrectly ask for premul.
When checking whether it's possible to decode to 565, return whether the
source is opaque.
In DM, allow decoding to 565 or Gray, even if the client also asked for premul.
This fixes a bug introduced in crrev.com/1999593003 when we stopped ever
requesting Opaque, resulting in us not testing 565 or Gray.
BUG=skia:4616
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=1996993003
Review-Url: https://codereview.chromium.org/1996993003
Only JPEG and WEBP support native scaling, so only create a CodecSrc
with a scale for those types.
If I run
dm --src image --images resources
this cuts down the number of Srcs from 11063 to 8032. All of these
trimmed Srcs would have failed quickly for each Sink (3 Sinks with the
above flags), but this will avoid creating them.
It drops the runtime on my mac from 13.2s to 11.4s, for about a 14%
speedup.
BUG=skia:5307
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1999103002
Review-Url: https://codereview.chromium.org/1999103002
With the GPU backend, allow F16 render targets to be created (along with
any other renderable format). We were previously just falling back to 8888.
In SampleApp, if the window configuration is F16, don't render directly
to the primary surface (which is actually sRGB 8888). Intead, make an
off-screen F16 surface, then blit it back to the framebuffer when we're done.
In DM, clamp values outside of [0,1]. These were wrapping, producing very
incorrect images. (Many filters can trigger out-of-range values due to
ringing).
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1890923003
Review URL: https://codereview.chromium.org/1890923003
I was using SkRect::MakeLargest() as bounds, which is sort of nutso,
as that clearly is way out of bounds for how big a picture can feasibly
be, i.e. something closer to SkIRect::MakeLargest().
This was causing spurious quick rejects in drawPatch(). I didn't really
look much deeper to figure out why. It's easy enough to just feed it the
proper bounds of the entire content.
This means patch_primitive draws correctly in sp-8888 mode.
I also noticed the GM was too small... it clipped off most of its content.
So I've made it larger.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1865143002
Review URL: https://codereview.chromium.org/1865143002
Also added SkSurfaceProps to SkSpecialImage, so that Image -> Surface conversion can preserve the desired behavior during filtering.
Many small changes, including a bunch of comments about places where we may be losing information right now. My approach was to ensure that if anything fails, it will always fall back to "legacy" mode - gamma-correctness is opt-in, so I'll just have to feed things through as missing cases are exposed.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1838953007
Review URL: https://codereview.chromium.org/1845283003
The following are currently unused in Android, Google3, Chromium, and Mozilla:
- SkEvent
- SkTime::GetMSecs
- SK_TIME_FACTOR (also unused in Skia)
- SkAutoTime
I left uses of SkMSec more-or-less intact for SkEvent, SkAnimator, and SkInterpolator. SkInterpolator is used in Chromium, so I did not want to change the API. The views/ and animator/ code is crufty, so it didn't seem worthwhile to refactor it. Instead, I added SkEvent::GetMSecsSinceStartup, which is likely to be adequate for use in SampleApp.
I also left SkMSec where it is used to measure a duration rather than a timestamp. With the exception of SkMovie, which is used in Android, all of the uses appear to measure the execution time of a piece of code, which I would hope does not exceed 2^31 milliseconds.
Added skiatest::Timer to support a common idiom in tests where we want to measure the wallclock time in integer milliseconds. (Not used in tests/PathOpsSkpClipTest.cpp because it redefines things in Test.h.)
Removed tabs in tests/StrokerTest.cpp.
BUG=skia:4632
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1811613004
Review URL: https://codereview.chromium.org/1811613004
The C++ standard library uses the name "release" for the operation we call "detach".
Rewriting each "detach(" to "release(" brings us a step closer to using standard library types directly (e.g. std::unique_ptr instead of SkAutoTDelete).
This was a fairly blind transformation. There may have been unintentional conversions in here, but it's probably for the best to have everything uniformly say "release".
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1809733002
Review URL: https://codereview.chromium.org/1809733002
