(re-land 248ff02 & 2cb6cb7, with changes)
- Hide SkImageEncoder class in private header.
- SkImageEncoder::Type becomes SkEncodedImageFormat
- SkEncodedFormat becomes SkEncodedImageFormat
- SkImageEncoder static functions replaced with
single function EncodeImage()
- utility wrappers for EncodeImage() are in
sk_tool_utils.h
TODO: remove link-time registration mechanism.
TODO: clean up clients use of API and flip the flag.
TODO: implement EncodeImage() in chromeium/skia/ext
Change-Id: I47d451e50be4d5c6c130869c7fa7c2857243d9f0
Reviewed-on: https://skia-review.googlesource.com/4909
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-on: https://skia-review.googlesource.com/5186
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Hal Canary <halcanary@google.com>
- Hide SkImageEncoder class in private header.
- SkImageEncoder::Type becomes SkEncodedImageFormat
- SkEncodedFormat becomes SkEncodedImageFormat
- SkImageEncoder static functions replaced with
single function EncodeImage()
- utility wrappers for EncodeImage() are in
sk_tool_utils.h
TODO: remove link-time registration mechanism.
TODO: clean up clients use of API and flip the flag.
TODO: implement EncodeImage() in chromeium/skia/ext
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4909
Change-Id: Ib48b31fdc05cf23cda7f56ebfd67c841c149ce70
Reviewed-on: https://skia-review.googlesource.com/4909
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
This was always intended to be a temporary dependency to use for
testing. It has served its purpose.
Also, this has already been dropped (accidentally, I think) by
the new GN build.
TBR=reed@google.com
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4220
Change-Id: Ic72ee08bbfaf86ed86a4122fd38be2921eb1327e
Reviewed-on: https://skia-review.googlesource.com/4220
Reviewed-by: Matt Sarett <msarett@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
Add a new accessor to retrieve the repetition count.
Remove constants (and corresponding copyright) in SkCodecAnimation.
These may make sense for the calling code, but are not needed here.
kRepetitionCountInfinite corresponds to Blink's kAnimationLoopInfinite.
Move cLoopCountNotSeen to private. It is used to determine whether we
still need to parse. Add a new enum to the parse query - only parse
enough to determine the repetition count.
Unlike Chromium, SkGifCodec does not account for deleting the reader
(which SkGifCodec does not do) or failed decodes.
Add a test.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2447863002
Review-Url: https://codereview.chromium.org/2447863002
Unmarked images should be treated as sRGB.
BUG=skia:4895
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4151
Change-Id: I5f8c308d22fd2d069cbfa89c5a5bb19ae6fde8bd
Reviewed-on: https://skia-review.googlesource.com/4151
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
This also makes the required changed to src, tests, and tools. The few
public APIs modified by this change appear to be unused outside of Skia.
Removing these from the public API makes it easier to ensure users are
no longer using them.
This also updates GrGpu::wrapBackendXXX and the
::onWrapBackendXXX methods to clarify ownership.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2448593002
Review-Url: https://codereview.chromium.org/2448593002
Add an interface to decode frames beyond the first in SkCodec, and
add an implementation for SkGifCodec.
Add getFrameData to SkCodec. This method reads ahead in the stream
to return a vector containing meta data about each frame in the image.
This is not required in order to decode frames beyond the first, but
it allows a client to learn extra information:
- how long the frame should be displayed
- whether a frame should be blended with a prior frame, allowing the
client to provide the prior frame to speed up decoding
Add a new fields to SkCodec::Options:
- fFrameIndex
- fHasPriorFrame
The API is designed so that SkCodec never caches frames. If a
client wants a frame beyond the first, they specify the frame in
Options.fFrameIndex. If the client does not have the
frame's required frame (the frame that this frame must be blended on
top of) cached, they pass false for
Options.fHasPriorFrame. Unless the frame is
independent, the codec will then recursively decode all frames
necessary to decode fFrameIndex. If the client has the required frame
cached, they can put it in the dst they pass to the codec, and the
codec will only draw fFrameIndex onto it.
Replace SkGifCodec's scanline decoding support with progressive
decoding, and update the tests accordingly.
Implement new APIs in SkGifCodec. Instead of using gif_lib, use
GIFImageReader, imported from Chromium (along with its copyright
headers) with the following changes:
- SkGifCodec is now the client
- Replace blink types
- Combine GIFColorMap::buildTable and ::getTable into a method that
creates and returns an SkColorTable
- Input comes from an SkStream, instead of a SegmentReader. Add
SkStreamBuffer, which buffers the (potentially partial) stream in
order to decode progressively.
(FIXME: This requires copying data that previously was read directly
from the SegmentReader. Does this hurt performance? If so, can we
fix it?)
- Remove UMA code
- Instead of reporting screen width and height to the client, allow the
client to query for it
- Fail earlier if the first frame AND screen have size of zero
- Compute required previous frame when adding a new one
- Move GIFParseQuery from GIFImageDecoder to GIFImageReader
- Allow parsing up to a specific frame (to skip parsing the rest of the
stream if a client only wants the first frame)
- Compute whether the first frame has alpha and supports index 8, to
create the SkImageInfo. This happens before reporting that the size
has been decoded.
Add GIFImageDecoder::haveDecodedRow to SkGifCodec, imported from
Chromium (along with its copyright header), with the following changes:
- Add support for sampling
- Use the swizzler
- Keep track of the rows decoded
- Do *not* keep track of whether we've seen alpha
Remove SkCodec::kOutOfOrder_SkScanlineOrder, which was only used by GIF
scanline decoding.
Call onRewind even if there is no stream (SkGifCodec needs to clear its
decoded state so it will decode from the beginning).
Add a method to SkSwizzler to access the offset into the dst, taking
subsetting into account.
Add a GM that animates a GIF.
Add tests for the new APIs.
*** Behavior changes:
* Previously, we reported that an image with a subset frame and no transparent
index was opaque and used the background index (if present) to fill the
background. This is necessary in order to support index 8, but it does not
match viewers/browsers I have seen. Examples:
- Chromium and Gimp render the background transparent
- Firefox, Safari, Linux Image Viewer, Safari Preview clip to the frame (for
a single frame image)
This CL matches Chromium's behavior and renders the background transparent.
This allows us to have consistent behavior across products and simplifies
the code (relative to what we would have to do to continue the old behavior
on Android). It also means that we will no longer support index 8 for some
GIFs.
* Stop checking for GIFSTAMP - all GIFs should be either 89a or 87a.
This matches Chromium. I suspect that bugs would have been reported if valid
GIFs started with "GIFVER" instead of "GIF89a" or "GIF87a" (but did not decode
in Chromium).
*** Future work not included in this CL:
* Move some checks out of haveDecodedRow, since they are the same for the
entire frame e.g.
- intersecting the frameRect with the full image size
- whether there is a color table
* Change when we write transparent pixels
- In some cases, Chromium deemed this unnecessary, but I suspect it is slower
than the fallback case. There will continue to be cases where we should
*not* write them, but for e.g. the first pass where we have already
cleared to transparent (which we may also be able to skip) writing the
transparent pixels will not make anything incorrect.
* Report color type and alpha type per frame
- Depending on alpha values, disposal methods, frame rects, etc, subsequent
frames may have different properties than the first.
* Skip copies of the encoded data
- We copy the encoded data in case the stream is one that cannot be rewound,
so we can parse and then decode (possibly not immediately). For some input
streams, this is unnecessary.
- I was concerned this cause a performance regression, but on average the
new code is faster than the old for the images I tested [1].
- It may cause a performance regression for Chromium, though, where we can
always move back in the stream, so this should be addressed.
Design doc:
https://docs.google.com/a/google.com/document/d/12Qhf9T92MWfdWujQwCIjhCO3sw6pTJB5pJBwDM1T7Kc/
[1] https://docs.google.com/a/google.com/spreadsheets/d/19V-t9BfbFw5eiwBTKA1qOBkZbchjlTC5EIz6HFy-6RI/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=2045293002
Review-Url: https://codereview.chromium.org/2045293002
(1) The transformation code *should* support any src SkColorSpace
that we successfully parse. This is agreed upon internally and
by clients. The fact that we currently don't is just a bug...
(2) We cannot and will not support all SkColorSpaces as dsts.
So if we fail to make a SkColorSpaceXform, we should assume that
it was caused by a bad dst color space. The correct response in
this case is to return kInvalidConversion. I've rewritten the CL
to do this.
The fact that weird src spaces will sometimes trigger a
kInvalidConversion is just a bug that is being actively worked on.
TBR=reed@google.com
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3661
Change-Id: Iac2b45120507ec71b1b3d555c61931f7348dad9e
Reviewed-on: https://skia-review.googlesource.com/3661
Commit-Queue: Matt Sarett <msarett@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-by: Robert Aftias <raftias@google.com>
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
- Set fDstInfo and fOptions in getPixels(). This may not be necessary
for all implementations, but it simplifies things for SkPngCodec.
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
Still causing problems in Google3, e.g.
https://test.corp.google.com/ui#cl=124138817&flags=CAMQBQ==&id=OCL:124138817:BASE:124139560:1465227435491:219ffbdb&t=//third_party/skia/HEAD:dm
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
>
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965
>
> Committed: https://skia.googlesource.com/skia/+/6fb2391b2cc83ee2160b4e994faa8128975acc1fTBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=skia:4211
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2044573002
Review-Url: https://codereview.chromium.org/2044573002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
Still breaking Google3 e.g.:
https://sponge.corp.google.com/target?id=9261d31b-34fc-4f0f-981e-f92f7c5cea2c&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1
https://test.corp.google.com/ui#cl=123773095&flags=CAMQBQ==&id=OCL:123773095:BASE:123773415:1464804876959:b0ea9b1c&t=//third_party/skia/HEAD:dm
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
>
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965TBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Review-Url: https://codereview.chromium.org/2026383002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
This is failing tests and then crashing on Google3 [1]. The crashes are fixed by crrev.com/2026873002, but to fix the builder we'll need to upgrade its version of libpng.
[1] https://sponge.corp.google.com/target?id=e545ef55-4da4-4931-9524-1ac92acb61b1&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539eTBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Review-Url: https://codereview.chromium.org/2023103002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
Lots of bots failing
Original issue's description:
> Add SkEncodedInfo to report properties of encoded image data
>
> All this does is build an SkEncodedInfo for each codec, and
> then convert it to an SkImageInfo.
>
> In future steps I intend to:
> (1) Use SkEncodedInfo in place of SrcConfig in SkSwizzler.
> (2) Support more conversions in SkSwizzler (non-native
> BGRA/RGBA, 16-bit components, float, fixed point)
> (3) Investigate optimizing conversions from encoded data
> to linear color spaces.
>
> BUG=skia:4133
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1820073002
>
> Committed: https://skia.googlesource.com/skia/+/f682d9ad70d690a343bc15e26ef321d86770be41TBR=scroggo@google.com,reed@google.com,msarett@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4133
Review URL: https://codereview.chromium.org/1895383002
All this does is build an SkEncodedInfo for each codec, and
then convert it to an SkImageInfo.
In future steps I intend to:
(1) Use SkEncodedInfo in place of SrcConfig in SkSwizzler.
(2) Support more conversions in SkSwizzler (non-native
BGRA/RGBA, 16-bit components, float, fixed point)
(3) Investigate optimizing conversions from encoded data
to linear color spaces.
BUG=skia:4133
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1820073002
Review URL: https://codereview.chromium.org/1820073002
This is a synonym for the version of getAndroidPixels that accepts
only three parameters (i.e. no AndroidOptions). It is very similar
to SkCodec::getPixels, so I think the motivation for naming the
version with options differently does not apply here.
Add comments to the header describing defaults.
Update the test to use a template, and delete a lot of redundant code.
Rename a variable to stop shadowing another variable.
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1647153002
Review URL: https://codereview.chromium.org/1647153002
If a client requests unpremul or premul from an opaque SkCodec,
support it. The opaque image can be treated as any of them, though
it will be less efficient to draw than if the client had used
opaque.
Change the filling code (i.e. for incomplete images) to base its color on
the source alpha type. Prior to adding the support to decode opaque to
any, it was fine to use either source or dest (which would have yielded
the same result). If the client requests non-opaque, we do not want this
to switch the fill value from black to transparent. This also allows
simplifying the signatures for getFillValue and onGetFillValue.
In CodexTest, expect the same result when decoding opaque to *premul,
and compare to the opaque version.
BUG=skia:4616
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1641273003
Review URL: https://codereview.chromium.org/1641273003
