They seem to be their own special cases for what
governors they support.
Bug: skia:
NOTRY=true
Change-Id: I7bb220e1d3ba6851c17c7e6ef327aab24ffdba42
Reviewed-on: https://skia-review.googlesource.com/83900
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
This scaling logic correctly accounts for some devices
which have multiple CPUs. Previously, we were scaling
the smaller of these CPUs, which likely had a negative
impact on nanobench, given nanobench was single threaded
and the CPUs weren't allowed to idle much (because we
set the CPU).
This CL sets those additional CPUs to powersave when we run
nanobench and then correctly scales down the beefier
CPU we want to run nanobench on.
For DM, we just run it in ondemand mode, which will
hopefully be "as fast as possible", but allow the CPU
governor to scale down if overheating becomes a problem.
Bug: skia:7378
notry=TRUE
Change-Id: I45ca5d9fb32182233d1b2d094842c879f2b84da4
Reviewed-on: https://skia-review.googlesource.com/83240
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Add logic to run on Nexus 5xs in Golo.
Bug:788839
Change-Id: I12290d11a0b1b0f012ada216da3e5b2599979c5e
Reviewed-on: https://skia-review.googlesource.com/81861
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:7381
Change-Id: I2dd5443c81cd895eb1d68b0cd90221a7e2e07d46
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/80843
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
It throttles 1000x more than intended, and I suspect that some of the
trip points it uses to decide when to throttle make no sense. We've
already turned it off on the Nexus 5x.
Change-Id: Idf556a83fe61ccc5f63c7bede3eecbe80087e28b
Reviewed-on: https://skia-review.googlesource.com/81303
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
It's causing a lot of sleep for being too hot. ThermalManager assumes
the trip points are static, when in fact, they are dynamic.
Bug: skia:7378
NOTRY=true
Change-Id: I907a42986831b7072a03a0423afd5a36bb2dfa74
Reviewed-on: https://skia-review.googlesource.com/80981
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
The new check was a different config while we fixed the errors. Most
errors are now fixed, and merging these will help with running both on
the CQ.
No-Try: true
Change-Id: I5804ecea84a8dbbaacf6a4ea96e2af9505641d49
Reviewed-on: https://skia-review.googlesource.com/79323
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
The previous list was created from scaling_min_freq and scaling_max_freq
instead of cpuinfo_min_freq and cpuinfo_max_freq which are the actual mins
and maxes, not the current (transient) settings of the governor.
Before:
Test-Release: 61 minutes
Perf-Debug: 41 minutes
After:
Test-Release: 32 minutes
Perf-Debug: 16 minutes
NOTRY=true
Bug: skia:
Change-Id: I9b431e92d2abcecb4fe643389daddc912a1399e1
Reviewed-on: https://skia-review.googlesource.com/78141
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Some bots, especially the Nexus 7s, seemed to occasionally
fail when setting the CPU frequency. I was unable to
repro this behavior, so this is a shotgun approach.
We add a 5 second delay between setting and checking,
checking frequency using scaling_cur_freq instead of
scaling_setspeed, set the min_freq as well as max_freq,
and retry up to 3 times if setting cpu frequency fails.
NOTRY=true
Bug: skia:
Change-Id: Id4d85d8d509c9dba8e3a0e06b5992f5adadf36d2
Reviewed-on: https://skia-review.googlesource.com/78140
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:
NOTRY=true
Change-Id: I1a1755dd03f2e6ebd8d9b2c9235cca8eb34f04ad
Reviewed-on: https://skia-review.googlesource.com/75280
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
This also makes *sure* the CPU frequency we set the
device to actually "takes". Along the way, I learned
if scaling_max_freq is < the frequency we set, the
scaling_max_freq will be used instead, which was
happening to the PixelCs and AndroidOnes.
As a result, this may make those two Test- configs faster.
Bug: skia:
Change-Id: I10c98d37e296a19e1cf67bfe7269bb59cdd912d5
Reviewed-on: https://skia-review.googlesource.com/74360
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:
Change-Id: I994f67c3043306d7fa612feb03f8fbe8d7bf4c91
Reviewed-on: https://skia-review.googlesource.com/73760
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:7305
Change-Id: Ifb270cba27daaef75d3930f990e19215a251ca28
Reviewed-on: https://skia-review.googlesource.com/71921
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
The test takes so long that the bot times out.
Bug: skia:
Change-Id: I77e7b192a1df1f422e61f09a931b7576fa55fbde
Reviewed-on: https://skia-review.googlesource.com/68440
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Bug: skia:
NOTRY=true
Change-Id: I500eae85ec334dc7121266ebd2f41dc526ec4695
Reviewed-on: https://skia-review.googlesource.com/66880
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
The first "sharding" technique we will try is just by test config
(e.g. 8888, gles, etc). Thus, for backwards compatibility,
the default "shard" is All, as in all configs
Bug: skia:
NOTRY=true
Change-Id: Ia02362477a5d97f8f74d688b5f0c4f45fc129375
Reviewed-on: https://skia-review.googlesource.com/59563
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
They pull stuff of using scp, which does not perform well
if a directory does not exist.
Skpbench also needs to be updated to use new adb.
Bug: skia:
NOTRY=true
Change-Id: I1e9f2dbddaab05e1aeb4d71d97f1e6e4bfdd299a
Reviewed-on: https://skia-review.googlesource.com/59081
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
The newer adb acts more like cp when pulling. We used to
create the dm folder on the host machine before pulling.
This used to be fine,
/device/dm_out/dm.json -> /host/dm/dm.json
However, with the update, adb would do
/device/dm_out/dm.json -> /host/dm/dm_out/dm.json
This breaks the upload step. To make this transition
a smooth one, /usr/bin/adb on the RPI is staying the same
(for a while, at least) and /usr/bin/adb.1.0.35 is being added.
That way we can use the new adb on tests after this commit, but
when we backfill, we don't break because of the unexpected folder.
Bug: skia:
Change-Id: Icbed38594fca0e17af1f8d01d75c42ce03f710b9
Reviewed-on: https://skia-review.googlesource.com/58880
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
I'm hoping that recent fixes to timing logic will prevent these problems.
Bug: skia:6534
Change-Id: Ia735e91887164c7a4882d5d3dd67df8c6115bfe9
Reviewed-on: https://skia-review.googlesource.com/54660
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
NUC6i7KYK with GTX960 is an experimental eGPU setup that will be
replaced with the NUC7i5BNK.
IntelHD4600 has been replaced with IntelHD4400.
Move remainder of *AbandonGpuContext jobs to QuadroP400.
No-Try: true
Change-Id: Ic81392ec162cb88500c9da7609471dbdc4a64f84
Reviewed-on: https://skia-review.googlesource.com/57320
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Perf numbers track closely with IntelIris540, although Perf numbers from
SurfacePro2017 are more noisy.
No-Try: true
Change-Id: I9dfefd6daf69644a1c0850453334876269cd7942
Reviewed-on: https://skia-review.googlesource.com/56540
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
No-Try: true
Change-Id: Ie255d46ff50d13d25d045791c1c3066f06ab9243
Reviewed-on: https://skia-review.googlesource.com/53601
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
No-Try: true
Change-Id: I449c0fd435b233e9c9538c17295ef18348380658
Reviewed-on: https://skia-review.googlesource.com/53120
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Change-Id: If3532bcb5bef5fad8c950d6844135ad3597d2674
Reviewed-on: https://skia-review.googlesource.com/51380
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Explicitly disable it on PixelC. This is arbitrary, so we continue to
get coverage of the single-threaded code.
Bug: skia:
Change-Id: I0ac91f7ca58652933db452720f353068cf2d0f2d
Reviewed-on: https://skia-review.googlesource.com/50000
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:4632
No-Try: true
Change-Id: I85a0b23037d5885e5d762788d8bf5b7cc6fc19b2
Reviewed-on: https://skia-review.googlesource.com/45980
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Bug: skia:
NOTRY=true
Change-Id: Ib604bad8eda6ba4382b850f7c5f318fb0f114401
Reviewed-on: https://skia-review.googlesource.com/20051
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Doing this separately from https://skia-review.googlesource.com/c/36040
to avoid confusion.
No-Try: true
Change-Id: I2d9e03c6da6096f9e14145d9654b9da7a8670036
Reviewed-on: https://skia-review.googlesource.com/35823
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Ravi Mistry <rmistry@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Not adding Vulkan configs because it mostly produces garbage -- see
skia:6398.
Bug: skia:6978
NoTry: true
Change-Id: I8f9fa7ecc5d195658944f8f29a91ddaf47c066fc
Reviewed-on: https://skia-review.googlesource.com/35321
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Ravi Mistry <rmistry@google.com>
No-Try: true
Change-Id: I41dfddf21f8ed80582d5dc88150e1fbaf98326e6
Reviewed-on: https://skia-review.googlesource.com/33803
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Adjust the configs specified by recipes to avoid the new error.
Change-Id: I23e31355e2faaab919d92abdb37a6f70cd2da1ff
Reviewed-on: https://skia-review.googlesource.com/32862
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Since recipes are now versioned with the code, this is unnecessary and
could mask recipe bugs.
Change-Id: Ic5aafbd3a7e9ccd3fd529c71b282cf6b037b78df
Reviewed-on: https://skia-review.googlesource.com/32722
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Started happening after an SKP updated. This looks to be another bug
in the llvm compiler Intel is using for windows vulkan.
Bug: skia:6863
Change-Id: If2bf4c4b61d0958a21e1e56eae6497310fcff3f8
Reviewed-on: https://skia-review.googlesource.com/31640
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
This blacklist the desk_skbug6850overlay2 which is causing llvm to crash
on the intel win bot when running vulkan.
Bug: skia:6863
Change-Id: I2c3ca597a3312e6c0a1bacae0056fcb1c19679bf
Reviewed-on: https://skia-review.googlesource.com/24264
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
This reverts commit e3e9628ecf.
Adds blendmode_mask_* benchs to blacklist for Chromecast.
Otherwise a clean revert of the revert.
Bug: skia:
Change-Id: I9f64ae55804fa4aad97c1785834281039570c56c
Reviewed-on: https://skia-review.googlesource.com/24409
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Bug: skia:
Change-Id: I25d4f4eeb3d06f3e2b64aad652ef91743494755a
Reviewed-on: https://skia-review.googlesource.com/21528
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Bug: skia:6612
Change-Id: I2920bb7b1aa3ebb021223ed6345f13f1f9c8bc24
Reviewed-on: https://skia-review.googlesource.com/21141
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Eric Boren <borenet@google.com>
No-Try: true
Change-Id: I2c1b598f03d8536aa3ef118630a0aed63fe54f9e
Reviewed-on: https://skia-review.googlesource.com/10526
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:6704
Change-Id: Id3cefa643316e5676d2038a75240e16d929d6d63
Reviewed-on: https://skia-review.googlesource.com/20146
Commit-Queue: Eric Boren <borenet@google.com>
Reviewed-by: Ravi Mistry <rmistry@google.com>
Bug: skia:6457 skia:6401
Change-Id: I18e45617765aa55c3a2837bb735cefc3d93fad22
Reviewed-on: https://skia-review.googlesource.com/19273
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Local testing says this has been fixed by some series of SKSL changes over
the past month or so
Bug: skia:6037
Change-Id: Iffc8b63e495016ac9565459ddaf44db4049a33c0
Reviewed-on: https://skia-review.googlesource.com/14530
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Also fix command flags to use skps instead of svgs
Bug: skia:6706
Change-Id: Ie099abac738e6eb8808db9aef513a51940c5ccb1
Reviewed-on: https://skia-review.googlesource.com/18441
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Using adb seemed to ignore errors in some cases, primarily
if nanobench crashed/hung.
Bug: skia:6706
Change-Id: I5def49d5b4d20bed6c486b7e85040190be856ac8
Reviewed-on: https://skia-review.googlesource.com/18404
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:6668
Change-Id: I324602b1381f701ec780c02b26775c5e9e09cb84
Reviewed-on: https://skia-review.googlesource.com/17834
Commit-Queue: Eric Boren <borenet@google.com>
Reviewed-by: Ravi Mistry <rmistry@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
This is so the blanket disabling of MSAA on Intel bots (in test.py & perf.py) actually disables it on the HD4000.
Change-Id: Ief3c0c85ed53e312f5e584ab51ba76f78fb8c036
Reviewed-on: https://skia-review.googlesource.com/17822
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
The new #ifndef account for what the chromecast sdk
cannot handle (e.g. posix).
Bug: skia:6581
Change-Id: I3d64d25980d80185f8b95c05badee5f665d97cd3
Reviewed-on: https://skia-review.googlesource.com/13811
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Rename swarming -> skia_swarming.
Some required heavy modification to remove other dependencies on modules
in build.git.
Expected changes:
- RECIPE_MODULE[build::<module>] -> RECIPE_MODULE[skia::<module>]
- No more runit; directly run through Python.
Bug: skia:6628
Change-Id: I1b1370ed387966222ce10731771dbde9020cf542
Reviewed-on: https://skia-review.googlesource.com/17448
Commit-Queue: Eric Boren <borenet@google.com>
Reviewed-by: Ravi Mistry <rmistry@google.com>
Enables debug output on iOS. Everything will work the
same except there will be more output for dm and nanobench.
This should help us flush out remaining flakiness and
will be removed once it's not necessary anymore.
Bug: skia:
Change-Id: Idfdc7cf829e93b905fdb0ac2bbab1e78250b7ae0
Reviewed-on: https://skia-review.googlesource.com/16491
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Stephan Altmueller <stephana@google.com>
No-Try: true
Change-Id: Idd748bf61ab3d6611b85472de5d3f3a25d4ae9ee
Reviewed-on: https://skia-review.googlesource.com/14821
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
We reboot this after in swarming with real adb, so this
is unnecessary and could, in fact, be harmful.
Bug: skia:6559
NOTRY=true
Change-Id: Iaf58416994637111c02013fe3c83f4ac92de2a66
Reviewed-on: https://skia-review.googlesource.com/14526
Reviewed-by: Eric Boren <borenet@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Adds more jobs to iOS testing and switches to
RPi based hosts.
Bug: skia:
Change-Id: I0124c6554173fa3b22b077a198612bb30691d1fb
Reviewed-on: https://skia-review.googlesource.com/11521
Commit-Queue: Stephan Altmueller <stephana@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
These are slow enough that they sometimes trigger GPU timeout.
Bug: skia:6534
Change-Id: Ie16a533e5ae132599d6514ae15a22d4fce4cb0fd
Reviewed-on: https://skia-review.googlesource.com/14064
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
For example, renaming GN_Android to Android
Bug: skia:
Change-Id: Ib71001b3cbecc3d5a0f3bb1bf0cf1f48dc23cfe4
Reviewed-on: https://skia-review.googlesource.com/13182
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:
Change-Id: Id127a3c4a1a40bc6ddb0641c9d72f1a5960bbc6e
Reviewed-on: https://skia-review.googlesource.com/13125
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
At one point I moved the contents of the recipes into modules so that
they could be shared between repos. It turns out that we don't need
that, and it adds complexity.
Bug: skia:6473
Change-Id: I75a920b6a8474dcdd8b37ee9edd52aac801d1ab0
Reviewed-on: https://skia-review.googlesource.com/12622
Reviewed-by: Ravi Mistry <rmistry@google.com>
Commit-Queue: Eric Boren <borenet@google.com>
Bug: skia:6473
Change-Id: Id78f0b5cb50ae2243b9a5aed8e552f7ed8202228
Reviewed-on: https://skia-review.googlesource.com/12060
Commit-Queue: Eric Boren <borenet@google.com>
Reviewed-by: Ravi Mistry <rmistry@google.com>
