AFAICT these three remaining uses of GrPendingIOResource were just real-ref placeholders (i.e., they just added 1 pending read and then held on to the GrPendingIOResource until object destruction).
Change-Id: Iba6bb199477d846d079999f09794422e240c675a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235458
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This allows us to test with fReduceOpListSplitting both enabled and
disabled.
This CL also requires adding basic mipmap support to GrMockGpu.
Bug: skia:
Change-Id: I97ba912a9e5f3b90756c027ac19c003c99c15902
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235996
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Also don't specify redundant width/height to SkGpuDevice.
Change-Id: I389df5c4b073c2c05632ba6b7c95b02a22dfaf98
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235824
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
These are numerically unstable. We've had various complex solutions in
the past (fall back to doubles, additional checks like this one), but
this solution is safer and simpler.
Change-Id: Ibe57a155a2aa604e20960f415b9dc3546ae859a9
Bug: chromium:993330
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235861
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This does not appear to be used externally, and only internally in 3
sites in GPU, which we can handle explicitly.
For now you can still pass bools to Iter::next() but they are ignored.
After this lands, I will update the callers to remove those.
FWIW: none of our other tests or gms seem to notice this change...
Bug: skia:9339
Change-Id: If40077b1ebb3d47cfce0ec43996ff272318e4a62
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235104
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Mike Reed <reed@google.com>
fMaxTextureSize and were never used by Skia, and
f{Min|Max}DistanceFieldFontSize are never set by Chrome.
Make a new constructor that only takes a bool to indicate DFT
capability. Move Chrome to use that ctor.
Change-Id: I1889dd39ffdaa2134b0892b8275f8223c6c8aad0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235102
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Move everything to SkRemoteGlyphCache.cpp. Add a call
to SkStrikeServer (AddGlyphForTest), to make tests work.
* Misc cleanups
Change-Id: I22bea686838f60cf96d097e1ea025cb5399903e7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235096
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Not currently used by any clients.
Change-Id: I21d554fb95ffef4f317945ab22c4cfb14fbb6b2a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234660
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Change-Id: I127c979670c3dc7dac2e35908a795afbdefca8f6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234902
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Change-Id: I962e923a4994eb549a9c1002323f33d05b936b84
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234912
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This folds the source SkSpecialImage, that was previously passed in as
an argument to filterImage(), into the filtering Context. This allows
the Context to provide convenient access to backend properties that
are only accessible through the source image, but makes it clear in
calling code that the actual pixels of the source image are not needed.
IMO this improves readability in implementations that previously had
functions that would take a 'src' and an 'input' image, but would only
really process the input image's pixels.
Bug: skia:9282
Change-Id: I42437dcc6819e3d3882bff7851f9b16277a69f06
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234578
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This gm doesn't seem to have ever drawn anything onto the actual canvas,
just leaving a white background. The content is derived from a fuzzer
generated path which caused an assert in the software rasterization of
the path. Since the point is to ensure that this path does not cause an
assertion when drawn, move to the path tests.
Change-Id: Ibff77763d8079386a9b4bfe9a437ffa16856b53b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234663
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
This also makes the isTexturable that takes a color explicitly called
isFormatTexturableAndUploadable. A lot of the uses of isConfigTexturable
were changed to the Uploadable version of the check, even though this is
not where we want to land in the long run. In the long run the uploadability
will be checked via calls to supportedWritePixelsColorType and all the
isTexturable calls should purely be about texturing. However, until those
changes land we keep it safe and keep the same functionality that
isConfigTexturable had by checking uploadability as well.
Bug: skia:6718
Change-Id: I3563f33f49811923da80e676fa3036ae46c4da70
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234323
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
This moves OutputProperties' fields into Context and decouples SkSpecialImage
makeSurface() functions from SkImageFilter_Base.
It adds a utility makeSurface() function to Context that calls the SkSpecialImage
functions. Currently that requires the source image to be provided to it.
In a later CL, Context will hold the source image and this makeSurface() function
will be even simpler to use.
This is split out from https://skia-review.googlesource.com/c/skia/+/232517
Bug: skia:9282
Change-Id: I3d742af323a1440e0dab54a576d45a4a44dc719b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234516
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Old version still exists until client code is migrated.
Change-Id: I087b6b977f586d334f9a20954e7ed7b5e4b7ea5e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234579
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This is a reland of fe19203eb7
Original change's description:
> Initiate regeneration of mipmaps from proxy DAG land
>
> This allows us to resolve all the textures before executing a command
> buffer, rather than interrupting execution as is currently done in the
> GL backend.
>
> Change-Id: I998546b312d24cf47fc2c837e7c94fbf95571af0
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/230636
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
Change-Id: Ic904d0b1bcb451bcb74cfae2204fb7297eaff108
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234016
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This is a stop gap. We should probably base the precision decision on the texture format.
Also removes all code used to add sampler precision to program keys. The precision that
was added to the key did not affect the generated GLSL.
Bug: skia:8863
Bug: skia:6718
Change-Id: Ibdb702e1aca5d48d83e2f24cb24010a0b7270871
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234322
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Change-Id: Id36aef0392f03aafe3f90d5d905b2b2f30a67c04
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234317
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
This makes the register recycling checks a bit more
precise. At head we never recycle a register that's
holding a hoisted value, which is overly conservative.
We really should never recycle a register that's still
needed. By extending the lifetime of any hoisted value
that's used in the loop, we prevent that, while still
allowing hoisted values that are only used in hoisted
computation to be reused.
This takes just a small tweak in the JIT code (removing
the !hoisted({x,y,z}) checks), and a somewhat larger
refactoring in the interpreter, making both hoisted and
non-hoisted code go through the same recycling register
assignment flow.
There's one diff in the existing cases where we now
reuse a hoisted register, and I've added a second test
just to make sure it's covered explicitly.
Change-Id: I25b37ab1f1fea3042d7fd167529abc8fed1dddff
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233239
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Previously YCbCr Vulkan samplers were supported only on Android for
external images, while Vulkan requires YCbCr sampler for I420 YUV image
formats such as VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM,
VK_FORMAT_G8_B8R8_2PLANE_420_UNORM.
This CL:
- Adds VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM and
VK_FORMAT_G8_B8R8_2PLANE_420_UNORM as supported Vulkan formats
- Updates GrVkYcbcrConversionInfo to add fFormat field and allow
fExternalFormat=0.
- Removes assertions format=VK_FORMAT_UNDEFINED for all images that
have ycbcr info.
Bug: chromium:981022
Change-Id: Id4d81b20d9fda4d9ad0831f77e6025eed3db2bfd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233776
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Auto-Submit: Sergey Ulanov <sergeyu@chromium.org>
This reverts commit fe19203eb7.
Reason for revert: Turned a lot of bots red
Original change's description:
> Initiate regeneration of mipmaps from proxy DAG land
>
> This allows us to resolve all the textures before executing a command
> buffer, rather than interrupting execution as is currently done in the
> GL backend.
>
> Change-Id: I998546b312d24cf47fc2c837e7c94fbf95571af0
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/230636
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=bsalomon@google.com,robertphillips@google.com,csmartdalton@google.com
Change-Id: Iaa8391b8fbd5a4f851ca41834c1dfeee4be6fedd
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233836
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This allows us to resolve all the textures before executing a command
buffer, rather than interrupting execution as is currently done in the
GL backend.
Change-Id: I998546b312d24cf47fc2c837e7c94fbf95571af0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/230636
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Remove return statements immediately following SK_ABORTs.
Change-Id: I6446b6ba3a6fb272d84ea27f38cf366095cf801d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233565
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit cc4573dfed.
Reason for revert: Seems to be crashing in Win Intel vulkan bots
Original change's description:
> Enable YCbCr sampler support on platforms other than Android
>
> Previously YCbCr Vulkan samplers were supported only on Android for
> external images, while Vulkan requires YCbCr sampler for I420 YUV image
> formats such as VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM,
> VK_FORMAT_G8_B8R8_2PLANE_420_UNORM.
> This CL:
> - Adds VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM and
> VK_FORMAT_G8_B8R8_2PLANE_420_UNORM as supported Vulkan formats
> - Updates GrVkYcbcrConversionInfo to add fFormat field and allow
> fExternalFormat=0.
> - Removes assertions format=VK_FORMAT_UNDEFINED for all images that
> have ycbcr info.
>
> Bug: chromium:981022
> Change-Id: I3989f72e918a257a081b81ae20429a6771229ad6
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/230918
> Commit-Queue: Sergey Ulanov <sergeyu@chromium.org>
> Commit-Queue: Greg Daniel <egdaniel@google.com>
> Auto-Submit: Sergey Ulanov <sergeyu@chromium.org>
> Reviewed-by: Greg Daniel <egdaniel@google.com>
TBR=egdaniel@google.com,sergeyu@chromium.org
Change-Id: Ia9c229fbec4cd397fb04304753fa49f34336ed3a
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:981022
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233563
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Previously YCbCr Vulkan samplers were supported only on Android for
external images, while Vulkan requires YCbCr sampler for I420 YUV image
formats such as VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM,
VK_FORMAT_G8_B8R8_2PLANE_420_UNORM.
This CL:
- Adds VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM and
VK_FORMAT_G8_B8R8_2PLANE_420_UNORM as supported Vulkan formats
- Updates GrVkYcbcrConversionInfo to add fFormat field and allow
fExternalFormat=0.
- Removes assertions format=VK_FORMAT_UNDEFINED for all images that
have ycbcr info.
Bug: chromium:981022
Change-Id: I3989f72e918a257a081b81ae20429a6771229ad6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/230918
Commit-Queue: Sergey Ulanov <sergeyu@chromium.org>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Auto-Submit: Sergey Ulanov <sergeyu@chromium.org>
Reviewed-by: Greg Daniel <egdaniel@google.com>
That makes layout phase 10 times faster (since the shaping takes 90% of it).
LRU cache is attached to the FontCollection object and has the same life time.
Currently it has hardcoded limit on the entry numbers (128).
One the number reached, the least recently used element is removed from the cache
to free the space for a new one.
Change-Id: I597e334422614e33715d7a9ed13acf7b1f9cd0e4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/230755
Commit-Queue: Julia Lavrova <jlavrova@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Reviewed-by: Julia Lavrova <jlavrova@google.com>
const and non-const for container classes such as std::vector
and std::array.
Change-Id: I6ad49de7f2f2c379ba6c964115806d058c72cd7e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233296
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Additionally this changes removes the version of the call that that takes
a GrPixelConfig.
As part of this change many call sites that were calling getRTSampleCount
to just check renderability have been changed to call
isFormat[AsColorType]Renderable instead. This change has also started to
move us to just checking format renderability (without GrCT) in classes
that are specifically dealing with GrSurface (GrResourceProvider, GrGpu, etc.).
Bug: skia:6718
Change-Id: Icf4a1a21a81a44e6863a7cd2059d21b9833d581f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233039
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
