They seem to be their own special cases for what
governors they support.
Bug: skia:
NOTRY=true
Change-Id: I7bb220e1d3ba6851c17c7e6ef327aab24ffdba42
Reviewed-on: https://skia-review.googlesource.com/83900
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
This scaling logic correctly accounts for some devices
which have multiple CPUs. Previously, we were scaling
the smaller of these CPUs, which likely had a negative
impact on nanobench, given nanobench was single threaded
and the CPUs weren't allowed to idle much (because we
set the CPU).
This CL sets those additional CPUs to powersave when we run
nanobench and then correctly scales down the beefier
CPU we want to run nanobench on.
For DM, we just run it in ondemand mode, which will
hopefully be "as fast as possible", but allow the CPU
governor to scale down if overheating becomes a problem.
Bug: skia:7378
notry=TRUE
Change-Id: I45ca5d9fb32182233d1b2d094842c879f2b84da4
Reviewed-on: https://skia-review.googlesource.com/83240
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Add logic to run on Nexus 5xs in Golo.
Bug:788839
Change-Id: I12290d11a0b1b0f012ada216da3e5b2599979c5e
Reviewed-on: https://skia-review.googlesource.com/81861
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
The previous list was created from scaling_min_freq and scaling_max_freq
instead of cpuinfo_min_freq and cpuinfo_max_freq which are the actual mins
and maxes, not the current (transient) settings of the governor.
Before:
Test-Release: 61 minutes
Perf-Debug: 41 minutes
After:
Test-Release: 32 minutes
Perf-Debug: 16 minutes
NOTRY=true
Bug: skia:
Change-Id: I9b431e92d2abcecb4fe643389daddc912a1399e1
Reviewed-on: https://skia-review.googlesource.com/78141
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Some bots, especially the Nexus 7s, seemed to occasionally
fail when setting the CPU frequency. I was unable to
repro this behavior, so this is a shotgun approach.
We add a 5 second delay between setting and checking,
checking frequency using scaling_cur_freq instead of
scaling_setspeed, set the min_freq as well as max_freq,
and retry up to 3 times if setting cpu frequency fails.
NOTRY=true
Bug: skia:
Change-Id: Id4d85d8d509c9dba8e3a0e06b5992f5adadf36d2
Reviewed-on: https://skia-review.googlesource.com/78140
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:
Change-Id: Iefef7d617e58de2b3be2e27aac075f822641e4ce
Reviewed-on: https://skia-review.googlesource.com/77641
Reviewed-by: Stephan Altmueller <stephana@google.com>
Commit-Queue: Eric Boren <borenet@google.com>
Bug: skia:
NOTRY=true
Change-Id: I1a1755dd03f2e6ebd8d9b2c9235cca8eb34f04ad
Reviewed-on: https://skia-review.googlesource.com/75280
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
This also makes *sure* the CPU frequency we set the
device to actually "takes". Along the way, I learned
if scaling_max_freq is < the frequency we set, the
scaling_max_freq will be used instead, which was
happening to the PixelCs and AndroidOnes.
As a result, this may make those two Test- configs faster.
Bug: skia:
Change-Id: I10c98d37e296a19e1cf67bfe7269bb59cdd912d5
Reviewed-on: https://skia-review.googlesource.com/74360
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: skia:
Change-Id: I994f67c3043306d7fa612feb03f8fbe8d7bf4c91
Reviewed-on: https://skia-review.googlesource.com/73760
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
a.k.a. GM fontpocalypse
Change-Id: If834940574adea29b48f35abec61f0a1c9bd59d3
Reviewed-on: https://skia-review.googlesource.com/69881
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
The first "sharding" technique we will try is just by test config
(e.g. 8888, gles, etc). Thus, for backwards compatibility,
the default "shard" is All, as in all configs
Bug: skia:
NOTRY=true
Change-Id: Ia02362477a5d97f8f74d688b5f0c4f45fc129375
Reviewed-on: https://skia-review.googlesource.com/59563
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
The newer adb acts more like cp when pulling. We used to
create the dm folder on the host machine before pulling.
This used to be fine,
/device/dm_out/dm.json -> /host/dm/dm.json
However, with the update, adb would do
/device/dm_out/dm.json -> /host/dm/dm_out/dm.json
This breaks the upload step. To make this transition
a smooth one, /usr/bin/adb on the RPI is staying the same
(for a while, at least) and /usr/bin/adb.1.0.35 is being added.
That way we can use the new adb on tests after this commit, but
when we backfill, we don't break because of the unexpected folder.
Bug: skia:
Change-Id: Icbed38594fca0e17af1f8d01d75c42ce03f710b9
Reviewed-on: https://skia-review.googlesource.com/58880
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Change-Id: If3532bcb5bef5fad8c950d6844135ad3597d2674
Reviewed-on: https://skia-review.googlesource.com/51380
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
This also required extending the blacklist argument to support
negative matching and wildcards.
Bug: skia:6918
Change-Id: I915e305c75fe23fc3e11c2dd3e91570967da0aaa
Reviewed-on: https://skia-review.googlesource.com/31444
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Adjust the configs specified by recipes to avoid the new error.
Change-Id: I23e31355e2faaab919d92abdb37a6f70cd2da1ff
Reviewed-on: https://skia-review.googlesource.com/32862
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Since recipes are now versioned with the code, this is unnecessary and
could mask recipe bugs.
Change-Id: Ic5aafbd3a7e9ccd3fd529c71b282cf6b037b78df
Reviewed-on: https://skia-review.googlesource.com/32722
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
They take a long time to upload, and we don't do anything with them.
BUG=skia:6821
Change-Id: I16c5fc423953fa3e9d0dcb184ecbbe23f3918357
Reviewed-on: https://skia-review.googlesource.com/26142
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This reverts commit 51f6a0f89e.
Reason for revert: try to fix chrome roll
Original change's description:
> Remove deadcode for sRGB image shading.
>
> Change-Id: I9d98da67d97b64ab55cf44b9ae447882dccda1ca
> Reviewed-on: https://skia-review.googlesource.com/20695
> Reviewed-by: Mike Klein <mtklein@chromium.org>
> Commit-Queue: Herb Derby <herb@google.com>
TBR=mtklein@chromium.org,mtklein@google.com,herb@google.com,reed@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: I90409a08409177d9dc3b094d736af0fdaf7d6cdd
Reviewed-on: https://skia-review.googlesource.com/20824
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit 51f6a0f89e.
Reason for revert: crazy attempt to fix chrome roll
Original change's description:
> Remove deadcode for sRGB image shading.
>
> Change-Id: I9d98da67d97b64ab55cf44b9ae447882dccda1ca
> Reviewed-on: https://skia-review.googlesource.com/20695
> Reviewed-by: Mike Klein <mtklein@chromium.org>
> Commit-Queue: Herb Derby <herb@google.com>
TBR=mtklein@chromium.org,mtklein@google.com,herb@google.com,reed@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: Icab02936d6c18e50b8de353aa1cd4c225e15e0bf
Reviewed-on: https://skia-review.googlesource.com/20800
Reviewed-by: Mike Reed <reed@google.com>
Change-Id: I9d98da67d97b64ab55cf44b9ae447882dccda1ca
Reviewed-on: https://skia-review.googlesource.com/20695
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Herb Derby <herb@google.com>
Bug: skia:6704
Change-Id: Id3cefa643316e5676d2038a75240e16d929d6d63
Reviewed-on: https://skia-review.googlesource.com/20146
Commit-Queue: Eric Boren <borenet@google.com>
Reviewed-by: Ravi Mistry <rmistry@google.com>
Bug: skia:
Change-Id: I8698aad706e2c9cc81280107cb08d83e08a9dc25
Reviewed-on: https://skia-review.googlesource.com/18145
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Stephan Altmueller <stephana@google.com>
Rename swarming -> skia_swarming.
Some required heavy modification to remove other dependencies on modules
in build.git.
Expected changes:
- RECIPE_MODULE[build::<module>] -> RECIPE_MODULE[skia::<module>]
- No more runit; directly run through Python.
Bug: skia:6628
Change-Id: I1b1370ed387966222ce10731771dbde9020cf542
Reviewed-on: https://skia-review.googlesource.com/17448
Commit-Queue: Eric Boren <borenet@google.com>
Reviewed-by: Ravi Mistry <rmistry@google.com>
Summary of the new world...
--image
CodecSrc and ImageGenSrc tests run on:
(1) 8888 with kIgnore transfer fn behavior
(2) srgb with kRespect transfer fn behavior
(3) f16
AndroidCodecSrc and BRDCodecSrc tests run on:
(1) 8888, since SkAndroidCodec always uses kIgnore
(2) f16, since android uses f16
--colorImage
ColorCodecSrc tests run on:
(1) 8888 in kBaseline mode, so we can see what the raw pixels look like
(2) srgb in color correct modes
(3) f16 in color correct modes
Bug: skia:
Change-Id: I65d1a04051da6f94bf5e48f7bc610f482870dc75
Reviewed-on: https://skia-review.googlesource.com/17396
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
Completes implementation for lazy and raster images. gpu is
still a TODO.
Bug: skia:6553
Change-Id: I898e4464ffc91442c7f98669f1203dd5c203621b
Reviewed-on: https://skia-review.googlesource.com/15307
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
This reverts commit 9ad0531a18.
Reason for revert: Does not handle transfer fn behavior.
Original change's description:
> Add SkImage::makeColorSpace() with correct transfer fn behavior
>
> Completes implementation for lazy and raster images. gpu is
> still a TODO.
>
> Bug: skia:6553
> Change-Id: I04eea5c4fb53c50c0406c2e6b6778b0e21fd85f8
> Reviewed-on: https://skia-review.googlesource.com/14403
> Commit-Queue: Matt Sarett <msarett@google.com>
> Reviewed-by: Mike Reed <reed@google.com>
>
TBR=mtklein@google.com,msarett@google.com,brianosman@google.com,reed@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: I3830321aea7d0dc5ab38a40f3318bb53a41df383
Reviewed-on: https://skia-review.googlesource.com/15306
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
Completes implementation for lazy and raster images. gpu is
still a TODO.
Bug: skia:6553
Change-Id: I04eea5c4fb53c50c0406c2e6b6778b0e21fd85f8
Reviewed-on: https://skia-review.googlesource.com/14403
Commit-Queue: Matt Sarett <msarett@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Bug: skia:6395
Change-Id: Ic5065bfc91cac83495836cd6d2a7cc059423c96e
Reviewed-on: https://skia-review.googlesource.com/13412
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
For example, renaming GN_Android to Android
Bug: skia:
Change-Id: Ib71001b3cbecc3d5a0f3bb1bf0cf1f48dc23cfe4
Reviewed-on: https://skia-review.googlesource.com/13182
Reviewed-by: Eric Boren <borenet@google.com>
At one point I moved the contents of the recipes into modules so that
they could be shared between repos. It turns out that we don't need
that, and it adds complexity.
Bug: skia:6473
Change-Id: I75a920b6a8474dcdd8b37ee9edd52aac801d1ab0
Reviewed-on: https://skia-review.googlesource.com/12622
Reviewed-by: Ravi Mistry <rmistry@google.com>
Commit-Queue: Eric Boren <borenet@google.com>
