Mostly this is a lot of plumbing of sk_sp around instead of const*.
This does allow the d3d and vk backends to hold refs to the GrBuffers that
are bound on a command buffer. This means that our buffer alloc pools will
not try to reuse this buffers until the gpu is done with them. Previously
vk and d3d will sniff out if one of these buffers was being used again
while still active on the gpu and rip out the internal backend buffer and
allocate a new one which is not cheap. We see a lot of perf wins from
not doing this.
Change-Id: I9ffe649151ee43066dce620bd3e2763b029a9811
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/303583
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
All coord transforms were identity, so this enshrines that
knowledge, then transitively removes a large amount of code.
Bug: skia:10416
Change-Id: Iae4af9ca21590bced1ce9fce3ab807f6cceaebd4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/300234
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Most of this CL is just noise (i.e., all the header changes) due to the
signature change. The 'discard' GM has some substantive changes but
that's about it.
Change-Id: I72011a442c149b5db93cf8decade6779be4f63d8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/296704
Reviewed-by: Adlai Holler <adlai@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This is a prerequisite change for the upcoming sample(child, matrix)
function. By itself, this CL doesn't really change anything; it just
adds an ownership tracking feature which sample(child, matrix) depends
on.
Change-Id: I98b12e5fb062a2535af367931e7a932ea9c63a59
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/281337
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
It is also used for writes to surfaces other than fragment shader
output. e.g. clears.
Change-Id: Id1eb79be6d1a8aed936456bffa59dee32661cec8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/280344
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Remove as many setters as possible, make the constructors less
ambiguous, make it movable, remove USE_UNIFORM_FLOAT_ARRAYS.
Change-Id: I71397d04b5b5d6deb792d77cb98d629d42785f06
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/279218
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
This reverts commit bc0fe058f8.
Reason for revert: red
Original change's description:
> Make TessellationTestOp and GrPipelineDynamicStateTestOp surface their programInfos at record time
>
> These aren't high priority but it would be nice to have all the ops go through the same system.
>
> Bug: skia:9455
> Change-Id: Idbd8b0829faf12703c82f5a016f5b0e7c3efb762
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/277757
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Robert Phillips <robertphillips@google.com>
TBR=egdaniel@google.com,robertphillips@google.com
Change-Id: I579ad16f144d17afaec9ee1b9000eaaa5c04228c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:9455
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/278508
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
These aren't high priority but it would be nice to have all the ops go through the same system.
Bug: skia:9455
Change-Id: Idbd8b0829faf12703c82f5a016f5b0e7c3efb762
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/277757
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This makes onPrePrepare match onPrepare & onExecute. Most of the new method bodies will-have-to/should be filled in anyway.
Change-Id: Ifc897feaeb2d8fe6eec3ac3a8e91f99393ad6758
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/277542
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Every op that updates dynamic state between draws has now been
migrated to explicit binding.
Change-Id: Ibd13c9c0ffb16a205c073dfb4fd21d93f496dc52
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/277493
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Fuses the relevant functionality into the set() calls.
Change-Id: I3a764219425c35967942366c60a6b9ee6ec48e11
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/276836
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This CL also incidentally adds:
1) a GrMeshDrawOp::Target 'outputView' virtual and switches GrOpFlushState over to overriding it.
2) a createProgramInfo helper to GrSimpleMeshDrawOpHelper
Bug: skia:9455
Change-Id: I88ce51c585b1458ee79a9aaa7024190e9f19198c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/274506
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This reverts commit d3606518fa.
Reason for revert: DDL3 bots are red
Original change's description:
> Add onPrePrepareDraws & createProgramInfo methods to GrDrawVerticesOp
>
> This CL also incidentally adds:
>
> 1) a GrMeshDrawOp::Target 'outputView' virtual and switches GrOpFlushState over to overriding it.
>
> 2) a createProgramInfo helper to GrSimpleMeshDrawOpHelper
>
> Bug: skia:9455
> Change-Id: Iecd712d3ac76038651bd2e0512134e310930d527
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/274551
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Robert Phillips <robertphillips@google.com>
TBR=egdaniel@google.com,robertphillips@google.com
Change-Id: I6e44ba3bc47df27479af9344af946e27f0a2e937
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:9455
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/274505
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This CL also incidentally adds:
1) a GrMeshDrawOp::Target 'outputView' virtual and switches GrOpFlushState over to overriding it.
2) a createProgramInfo helper to GrSimpleMeshDrawOpHelper
Bug: skia:9455
Change-Id: Iecd712d3ac76038651bd2e0512134e310930d527
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/274551
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Clients now must call bindPipeline() before drawing.
Also renames GrOpsRenderPass::draw() to drawMeshes(), in order to
ensure every call site gets updated. drawMeshes() will soon be
replaced by individual calls for each draw type (indexed, instanced,
indexed-patterned, indirect, etc.).
Change-Id: I93ef579ded7d0048c5aa1bf1d7c0eb7bc1cd27b2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/270424
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Implements tessellation support at the Ganesh level, and adds back
door methods for supplying raw GLSL strings directly to the OpenGL
driver. Adds a new gm to verify tessellation is works in GL.
Change-Id: Idfc285b955cbe5e8e6bf0475be8b518b0cc6ed2c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/261196
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
