2012-02-23 13:59:35 +00:00
# Copyright 2012 the V8 project authors. All rights reserved.
2008-08-28 13:17:47 +00:00
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
2009-03-10 13:35:28 +00:00
# * Redistributions of source code must retain the above copyright
2008-08-28 13:17:47 +00:00
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
2013-09-24 12:08:33 +00:00
[
[ALWAYS, {
# All tests in the bug directory are expected to fail.
'bugs/*': [FAIL],
2013-10-31 11:48:31 +00:00
##############################################################################
# Flaky tests.
2013-11-05 19:29:58 +00:00
# BUG(v8:2921).
2013-11-26 16:53:04 +00:00
'debug-step-4-in-frame': [PASS, FAIL, SLOW],
2013-10-31 11:48:31 +00:00
2013-09-24 12:08:33 +00:00
##############################################################################
# Fails.
'regress/regress-1119': [FAIL],
# Issue 1719: Slow to collect arrays over several contexts.
'regress/regress-524': [SKIP],
# When that bug is fixed, revert the expectation to:
# Skip long running test in debug and allow it to timeout in release mode.
# regress/regress-524: [PASS, TIMEOUT, ['mode == debug', SKIP]],
# This test non-deterministically runs out of memory on Windows ia32.
'regress/regress-crbug-160010': [SKIP],
2014-06-13 08:05:34 +00:00
# Issue 3389: deopt_every_n_garbage_collections is unsafe
'regress/regress-2653': [SKIP],
2014-12-22 15:30:35 +00:00
# Issue 3784: setters-on-elements is flaky
'setters-on-elements': [PASS, FAIL],
2014-07-30 13:54:45 +00:00
##############################################################################
# TurboFan compiler failures.
# TODO(mstarzinger): An arguments object materialized in the prologue can't
# be accessed indirectly. Either we drop that requirement or wait for support
# from the deoptimizer to do that.
'arguments-indirect': [PASS, NO_VARIANTS],
2014-09-26 10:43:01 +00:00
# TODO(verwaest): Some tests are over-restrictive about object layout.
2014-07-30 13:54:45 +00:00
'array-constructor-feedback': [PASS, NO_VARIANTS],
'array-feedback': [PASS, NO_VARIANTS],
2014-09-26 10:43:01 +00:00
'compare-known-objects-slow': [PASS, NO_VARIANTS],
2014-09-10 09:52:50 +00:00
'elements-kind': [PASS, NO_VARIANTS],
2015-01-19 12:35:05 +00:00
'opt-elements-kind': [PASS, NO_VARIANTS],
2015-03-09 13:24:29 +00:00
'smi-representation': [PASS, NO_VARIANTS],
2014-07-30 13:54:45 +00:00
# Some tests are just too slow to run for now.
2015-01-19 12:35:05 +00:00
'big-object-literal': [PASS, NO_VARIANTS],
2014-07-30 13:54:45 +00:00
'bit-not': [PASS, NO_VARIANTS],
2014-11-06 12:55:52 +00:00
'json2': [PASS, NO_VARIANTS],
2014-07-30 13:54:45 +00:00
'packed-elements': [PASS, NO_VARIANTS],
2015-09-10 10:39:02 +00:00
'string-indexof-1': [PASS, NO_VARIANTS],
2014-09-15 12:48:55 +00:00
'unbox-double-arrays': [PASS, NO_VARIANTS],
2015-04-07 15:44:16 +00:00
'unicode-test': [PASS, NO_VARIANTS],
2014-07-30 13:54:45 +00:00
'whitespaces': [PASS, NO_VARIANTS],
'compiler/osr-assert': [PASS, NO_VARIANTS],
2015-09-10 10:39:02 +00:00
'es6/string-fromcodepoint': [PASS, NO_VARIANTS],
2014-07-30 13:54:45 +00:00
'regress/regress-2185-2': [PASS, NO_VARIANTS],
2015-01-16 12:53:24 +00:00
'regress/regress-2612': [PASS, NO_VARIANTS],
2014-07-30 13:54:45 +00:00
2015-01-27 21:06:36 +00:00
# Modules are busted
'harmony/module-linking': [SKIP],
'harmony/module-recompile': [SKIP],
'harmony/module-resolution': [SKIP],
'harmony/regress/regress-343928': [SKIP],
2014-10-30 07:33:12 +00:00
# Issue 3660: Replacing activated TurboFan frames by unoptimized code does
# not work, but we expect it to not crash.
'debug-step-turbofan': [PASS, FAIL],
2015-04-07 15:44:16 +00:00
# TODO(mstarzinger): Optimizing top-level code revealed some issues. Fix!
2015-04-08 10:35:09 +00:00
'bitops-info': [PASS, NO_VARIANTS], # fails on ARM hardware.
'md5': [PASS, NO_VARIANTS], # fails on ARM hardware.
2015-04-09 08:21:38 +00:00
'debug-break-inline': [PASS, NO_VARIANTS], # very flaky.
2015-04-07 15:44:16 +00:00
'debug-compile-event-newfunction': [PASS, NO_VARIANTS],
2015-04-08 10:35:09 +00:00
'debug-conditional-breakpoints': [PASS, NO_VARIANTS],
2015-04-07 15:44:16 +00:00
'debug-evaluate-locals-optimized': [PASS, NO_VARIANTS],
'debug-evaluate-locals-optimized-double': [PASS, NO_VARIANTS],
'debug-evaluate-recursive': [PASS, NO_VARIANTS], # only in no-snap debug.
2015-04-16 12:46:36 +00:00
'debug-ignore-breakpoints': [PASS, NO_VARIANTS], # only in no-snap debug.
2015-04-09 17:46:08 +00:00
'debug-setbreakpoint': [PASS, NO_VARIANTS], # only in no-snap debug.
2015-04-08 09:24:55 +00:00
'debug-step': [PASS, NO_VARIANTS], # windows only.
2015-04-08 09:51:14 +00:00
'debug-step-2': [PASS, NO_VARIANTS], # flaky in no-snap mode.
2015-04-08 14:16:50 +00:00
'debug-step-3': [PASS, NO_VARIANTS], # flaky in no-snap mode.
2015-04-07 20:09:57 +00:00
'debug-stepframe-clearing': [PASS, NO_VARIANTS], # only in no-snap debug.
2015-04-08 17:28:52 +00:00
'debug-stepin-call-function-stub': [PASS, NO_VARIANTS], # only in no-snap debug.
2015-10-15 12:01:52 +00:00
'debug-stepin-positions': [PASS, NO_VARIANTS], # only due to inlining.
2015-04-09 08:47:28 +00:00
'regress/regress-3717': [PASS, NO_VARIANTS], # only in no-snap mode.
'regress/regress-2451': [PASS, NO_VARIANTS], # with custom snapshot and gc-stress.
'debug-multiple-breakpoints': [PASS, NO_VARIANTS], # with custom snapshot and gc-stress.
2015-04-13 09:09:40 +00:00
'debug-listbreakpoints': [PASS, NO_VARIANTS], # arm64 nosnap with turbofan
'debug-enable-disable-breakpoints': [PASS, NO_VARIANTS], #arm64 nosnap with turbofan.
2015-04-07 15:44:16 +00:00
2015-04-22 13:22:37 +00:00
# Issue 4035: unexpected frame->context() in debugger
'regress/regress-crbug-107996': [PASS, NO_VARIANTS],
'regress/regress-crbug-171715': [PASS, NO_VARIANTS],
'regress/regress-crbug-222893': [PASS, NO_VARIANTS],
2015-06-10 09:13:54 +00:00
'regress/regress-crbug-323936': [PASS, NO_VARIANTS],
2015-05-26 13:06:38 +00:00
'regress/regress-crbug-491943': [PASS, NO_VARIANTS],
2015-04-22 13:22:37 +00:00
'regress/regress-325676': [PASS, NO_VARIANTS],
'debug-evaluate-closure': [PASS, NO_VARIANTS],
'debug-evaluate-with': [PASS, NO_VARIANTS],
2015-04-07 15:44:16 +00:00
# TODO(mstarzinger): Optimizing top-level code flushed out some correctness
# issues on ARM and ARM64.
'es6/math-log2-log10': [PASS, NO_VARIANTS], # on ARM and ARM64.
'mirror-script': [PASS, NO_VARIANTS], # on ARM64 only.
2015-01-19 12:35:05 +00:00
# TODO(jarin/mstarzinger): Investigate debugger issues with TurboFan.
'debug-evaluate-const': [PASS, NO_VARIANTS],
'debug-evaluate-locals': [PASS, NO_VARIANTS],
2015-07-16 15:12:31 +00:00
'debug-evaluate-locals-capturing': [PASS, NO_VARIANTS],
2015-01-19 12:35:05 +00:00
'debug-liveedit-check-stack': [PASS, NO_VARIANTS], # only in no-snap mode.
'debug-liveedit-double-call': [PASS, NO_VARIANTS],
'debug-set-variable-value': [PASS, NO_VARIANTS],
'debug-stepout-scope-part1': [PASS, NO_VARIANTS],
'debug-stepout-scope-part2': [PASS, NO_VARIANTS],
'debug-stepout-scope-part3': [PASS, NO_VARIANTS],
2015-03-13 15:15:42 +00:00
'es6/debug-evaluate-blockscopes': [PASS, NO_VARIANTS],
2015-04-22 14:16:32 +00:00
# issue 4055:
'es6/generators-debug-scopes': [PASS, NO_VARIANTS],
2014-07-30 13:54:45 +00:00
2015-04-10 12:35:12 +00:00
# TODO(titzer): --always-opt incorrectly disables CrankShaft soft deopt points
'result-table-min': [PASS, NO_VARIANTS],
'result-table-max': [PASS, NO_VARIANTS],
2015-04-30 14:50:41 +00:00
# TODO(titzer): too slow in --turbo mode due to O(n^2) graph verification.
'regress/regress-1122': [PASS, NO_VARIANTS],
2015-04-10 12:35:12 +00:00
2015-10-20 13:16:33 +00:00
# Assumptions about optimization need investigation in TurboFan.
'compiler/inlined-call': [PASS, NO_VARIANTS],
'deopt-with-fp-regs': [PASS, NO_VARIANTS],
'regress-sync-optimized-lists': [PASS, NO_VARIANTS],
2015-05-06 07:20:50 +00:00
# issue 4078:
'allocation-site-info': [PASS, NO_VARIANTS],
2013-09-24 12:08:33 +00:00
##############################################################################
# Too slow in debug mode with --stress-opt mode.
'compiler/regress-stacktrace-methods': [PASS, ['mode == debug', SKIP]],
'compiler/regress-funcaller': [PASS, ['mode == debug', SKIP]],
'regress/regress-2318': [PASS, ['mode == debug', SKIP]],
'regress/regress-create-exception': [PASS, ['mode == debug', SKIP]],
2015-03-24 19:02:48 +00:00
##############################################################################
# Too slow in debug mode for validation of elements.
'regress/regress-430201': [PASS, ['mode == debug', SKIP]],
'regress/regress-430201b': [PASS, ['mode == debug', SKIP]],
2013-09-24 12:08:33 +00:00
##############################################################################
# Too slow in debug mode for GC stress mode.
'regress/regress-crbug-217858': [PASS, ['mode == debug', SKIP]],
2013-10-25 08:57:50 +00:00
##############################################################################
2015-04-07 15:44:16 +00:00
# Only RegExp stuff tested, no need for extensive optimizing compiler tests.
2013-10-25 08:57:50 +00:00
'regexp-global': [PASS, NO_VARIANTS],
2015-06-16 12:37:37 +00:00
'third_party/regexp-pcre/regexp-pcre': [PASS, NO_VARIANTS],
2013-10-25 08:57:50 +00:00
2014-01-10 12:07:29 +00:00
##############################################################################
# No need to waste time for this test.
'd8-performance-now': [PASS, NO_VARIANTS],
2015-06-15 10:27:17 +00:00
'regress/regress-crbug-491062': [PASS, NO_VARIANTS],
2014-01-10 12:07:29 +00:00
2013-09-24 12:08:33 +00:00
# Issue 488: this test sometimes times out.
'array-constructor': [PASS, TIMEOUT],
# Very slow on ARM and MIPS, contains no architecture dependent code.
2015-09-29 17:23:44 +00:00
'unicode-case-overoptimization': [PASS, NO_VARIANTS, ['arch == arm or arch == arm64 or arch == android_arm or arch == android_arm64 or arch == mipsel or arch == mips64el or arch == mips64 or arch == mips', TIMEOUT]],
'regress/regress-3976': [PASS, NO_VARIANTS, ['arch == arm or arch == arm64 or arch == android_arm or arch == android_arm64 or arch == mipsel or arch == mips64el or arch == mips64 or arch == mips', SKIP]],
2015-06-25 11:42:03 +00:00
'regress/regress-crbug-482998': [PASS, NO_VARIANTS, ['arch == arm or arch == arm64 or arch == android_arm or arch == android_arm64 or arch == mipsel or arch == mips64el or arch == mips', SKIP]],
2013-09-24 12:08:33 +00:00
##############################################################################
# This test expects to reach a certain recursion depth, which may not work
# for debug mode.
'json-recursive': [PASS, ['mode == debug', PASS, FAIL]],
##############################################################################
# Skip long running tests that time out in debug mode.
'generated-transition-stub': [PASS, ['mode == debug', SKIP]],
2014-07-24 12:39:01 +00:00
'migrations': [SKIP],
2015-10-01 19:18:51 +00:00
'array-functions-prototype-misc': [PASS, SLOW, ['mode == debug', SKIP]],
2013-09-24 12:08:33 +00:00
##############################################################################
# This test sets the umask on a per-process basis and hence cannot be
# used in multi-threaded runs.
# On android there is no /tmp directory.
2014-04-10 07:25:49 +00:00
# Currently d8-os generates a temporary directory name using Math.random(), so
# we cannot run several variants of d8-os simultaneously, since all of them
# get the same random seed and would generate the same directory name. Besides
# that, it doesn't make sense to run several variants of d8-os anyways.
'd8-os': [PASS, NO_VARIANTS, ['isolates or arch == android_arm or arch == android_arm64 or arch == android_ia32', SKIP]],
2014-08-04 09:13:58 +00:00
'tools/tickprocessor': [PASS, NO_VARIANTS, ['arch == android_arm or arch == android_arm64 or arch == android_ia32', SKIP]],
2013-09-24 12:08:33 +00:00
##############################################################################
# Long running test that reproduces memory leak and should be run manually.
'regress/regress-2073': [SKIP],
2013-12-05 17:26:22 +00:00
##############################################################################
# Tests verifying CHECK and ASSERT.
'verify-check-false': [FAIL, NO_VARIANTS],
2014-12-08 09:26:04 +00:00
'verify-assert-false': [NO_VARIANTS, ['mode == release and dcheck_always_on == False', PASS], ['mode == debug or dcheck_always_on == True', FAIL]],
2014-01-24 11:36:45 +00:00
##############################################################################
# Tests with different versions for release and debug.
'compiler/alloc-number': [PASS, ['mode == debug', SKIP]],
'compiler/alloc-number-debug': [PASS, ['mode == release', SKIP]],
'regress/regress-634': [PASS, ['mode == debug', SKIP]],
'regress/regress-634-debug': [PASS, ['mode == release', SKIP]],
2014-01-31 13:56:00 +00:00
# BUG(336820). TODO(bmeurer): Investigate.
'regress/regress-336820': [PASS, FAIL],
2014-01-31 16:12:58 +00:00
2014-01-31 16:47:52 +00:00
# BUG(v8:2989). PASS/FAIL on linux32 because crankshaft is turned off for
2014-02-01 09:56:20 +00:00
# nosse2. Also for arm novfp3.
2014-05-23 16:37:27 +00:00
'regress/regress-2989': [FAIL, NO_VARIANTS, ['system == linux and arch == x87 or arch == arm and simulator == True', PASS]],
2014-04-15 16:39:21 +00:00
2015-01-16 12:38:13 +00:00
# Skip endain dependent test for mips due to different typed views of the same
# array buffer.
'nans': [PASS, ],
2014-10-02 08:37:51 +00:00
# This test variant makes only sense on arm.
'math-floor-of-div-nosudiv': [PASS, SLOW, ['arch not in [arm, arm64, android_arm, android_arm64]', SKIP]],
2014-11-05 10:38:40 +00:00
# Too slow for slow variants.
2014-11-26 08:51:35 +00:00
'asm/embenchen/*': [PASS, SLOW, FAST_VARIANTS],
2015-04-22 09:33:45 +00:00
'asm/poppler/*': [PASS, SLOW, FAST_VARIANTS],
2015-04-22 07:44:58 +00:00
'asm/sqlite3/*': [PASS, SLOW, FAST_VARIANTS],
2015-03-25 15:55:51 +00:00
# BUG(v8:3838).
'regress/regress-3116': [PASS, ['isolates', FLAKY]],
2015-07-08 13:49:13 +00:00
2015-10-15 13:31:39 +00:00
# BUG(v8:4458). TODO(mvstanton): reenable the test once --vector-stores is
2015-10-02 09:28:58 +00:00
# prermanently enabled.
'call-counts': [SKIP],
2015-07-08 13:49:13 +00:00
# BUG(chromium:508074). Remove this once the issue is fixed.
'harmony/arrow-rest-params': [PASS, NO_VARIANTS],
2015-07-08 15:21:41 +00:00
'harmony/rest-params': [PASS, ['no_snap == True', NO_VARIANTS]],
2015-10-01 19:18:51 +00:00
# Slow tests.
'copy-on-write-assert': [PASS, SLOW],
'debug-scopes': [PASS, SLOW],
'es7/object-observe': [PASS, ['mode == debug', SLOW]],
'numops-fuzz-part*': [PASS, ['mode == debug', SLOW]],
'readonly': [PASS, SLOW],
'regress/regress-1200351': [PASS, ['mode == debug', SLOW]],
'regress/regress-crbug-474297': [PASS, ['mode == debug', SLOW]],
2015-10-21 15:05:13 +00:00
'strong/implicit-conversions': [PASS, SLOW],
2015-10-01 19:18:51 +00:00
'strong/load-element-mutate-backing-store': [PASS, SLOW],
2013-09-24 12:08:33 +00:00
}], # ALWAYS
2013-01-24 11:55:05 +00:00
2015-06-23 09:43:09 +00:00
['novfp3 == True', {
'asm/embenchen/box2d': [SKIP],
'asm/embenchen/zlib': [SKIP],
'asm/embenchen/memops': [SKIP],
'asm/embenchen/lua_binarytrees': [SKIP],
}], # novfp3 == True
2014-01-21 12:41:25 +00:00
##############################################################################
['gc_stress == True', {
# Skip tests not suitable for GC stress.
'allocation-site-info': [SKIP],
'array-constructor-feedback': [SKIP],
'array-feedback': [SKIP],
'array-literal-feedback': [SKIP],
'd8-performance-now': [SKIP],
2014-08-05 09:24:27 +00:00
'debug-stepout-scope-part8': [PASS, ['arch == arm ', FAIL]],
2014-01-21 12:41:25 +00:00
'elements-kind': [SKIP],
2014-08-05 09:24:27 +00:00
'elements-transition-hoisting': [SKIP],
2014-01-21 12:41:25 +00:00
'fast-prototype': [SKIP],
2014-11-14 11:36:26 +00:00
'field-type-tracking': [SKIP],
2014-08-05 09:24:27 +00:00
'getters-on-elements': [SKIP],
2015-03-13 15:15:42 +00:00
'es6/block-let-crankshaft': [SKIP],
2014-01-21 12:41:25 +00:00
'opt-elements-kind': [SKIP],
'osr-elements-kind': [SKIP],
2014-11-12 16:05:53 +00:00
'regress/regress-crbug-137689': [SKIP],
2014-01-21 12:41:25 +00:00
'regress/regress-165637': [SKIP],
'regress/regress-2249': [SKIP],
2015-09-23 11:15:50 +00:00
'regress/regress-4121': [SKIP],
2015-10-07 14:56:47 +00:00
'compare-known-objects-slow': [SKIP],
2014-07-01 08:32:47 +00:00
# Tests taking too long
2014-07-22 16:30:23 +00:00
'debug-stepout-scope-part8': [SKIP],
'mirror-object': [SKIP],
'packed-elements': [SKIP],
'regress/regress-1122': [SKIP],
'regress/regress-331444': [SKIP],
'regress/regress-353551': [SKIP],
'regress/regress-crbug-119926': [SKIP],
'regress/short-circuit': [SKIP],
2014-07-22 20:30:08 +00:00
'stack-traces-overflow': [SKIP],
2014-07-22 16:30:23 +00:00
'unicode-test': [SKIP],
2014-08-11 19:44:33 +00:00
'whitespaces': [SKIP],
# TODO(mstarzinger): Takes too long with TF.
'array-sort': [PASS, NO_VARIANTS],
2014-09-15 17:40:26 +00:00
'regress/regress-91008': [PASS, NO_VARIANTS],
2014-11-04 11:58:09 +00:00
'regress/regress-417709a': [PASS, ['arch == arm64', NO_VARIANTS]],
'regress/regress-transcendental': [PASS, ['arch == arm64', NO_VARIANTS]],
2014-10-17 14:28:00 +00:00
'compiler/osr-regress-max-locals': [PASS, NO_VARIANTS],
'math-floor-of-div': [PASS, NO_VARIANTS],
2014-10-29 15:18:09 +00:00
'unicodelctest': [PASS, NO_VARIANTS],
'unicodelctest-no-optimization': [PASS, NO_VARIANTS],
2014-11-05 13:12:30 +00:00
2015-08-28 10:20:29 +00:00
# TODO(jkummerow): Doesn't work correctly in GC stress.
2015-08-28 10:22:00 +00:00
'regress/regress-crbug-500497': [SKIP],
2015-08-28 10:20:29 +00:00
2014-11-05 13:12:30 +00:00
# Too slow for gc stress.
'asm/embenchen/box2d': [SKIP],
2014-11-24 16:29:05 +00:00
# Issue 3723.
'regress/regress-3717': [SKIP],
2015-06-22 22:37:30 +00:00
# BUG(v8:4237)
'regress/regress-3976': [SKIP],
2015-08-05 12:50:46 +00:00
# BUG(v8:4359)
'strong/load-proxy': [SKIP],
2015-08-19 10:03:32 +00:00
2015-10-01 19:18:51 +00:00
# Slow tests.
'array-constructor': [PASS, SLOW],
'json': [PASS, SLOW],
'regress/regress-446389': [PASS, SLOW],
'regress/regress-inline-getter-near-stack-limit': [PASS, SLOW],
2015-11-03 08:20:20 +00:00
# BUG(v8:3097)
'debug-references': [SKIP],
2014-01-21 12:41:25 +00:00
}], # 'gc_stress == True'
2015-08-31 11:14:57 +00:00
##############################################################################
['no_i18n == True and mode == debug', {
# Tests too slow for no18n debug.
'regress/regress-1200351': [SKIP],
}], # 'no_i18n == True and mode == debug'
2015-01-30 08:01:53 +00:00
##############################################################################
['byteorder == big', {
# Emscripten requires little-endian, skip all tests on big endian platforms.
'asm/embenchen/*': [SKIP],
2015-04-22 22:31:47 +00:00
'asm/poppler/*': [SKIP],
'asm/sqlite3/*': [SKIP],
2015-01-30 08:01:53 +00:00
}], # 'byteorder == big'
2014-02-12 09:19:30 +00:00
##############################################################################
2014-03-27 10:06:53 +00:00
['arch == arm64 or arch == android_arm64', {
2014-02-12 09:19:30 +00:00
2014-08-12 12:30:45 +00:00
# arm64 TF timeout.
'regress/regress-1257': [PASS, TIMEOUT],
2014-02-12 09:19:30 +00:00
# Requires bigger stack size in the Genesis and if stack size is increased,
# the test requires too much time to run. However, the problem test covers
# should be platform-independent.
'regress/regress-1132': [SKIP],
# Pass but take too long to run. Skip.
2014-03-21 09:28:26 +00:00
# Some similar tests (with fewer iterations) may be included in arm64-js
# tests.
2014-11-06 10:24:13 +00:00
'asm/embenchen/box2d': [SKIP],
'asm/embenchen/lua_binarytrees': [SKIP],
2014-08-01 13:51:23 +00:00
'big-object-literal': [SKIP],
2014-02-12 09:19:30 +00:00
'compiler/regress-arguments': [SKIP],
'compiler/regress-gvn': [SKIP],
'compiler/regress-max-locals-for-osr': [SKIP],
'compiler/regress-4': [SKIP],
'compiler/regress-or': [SKIP],
'compiler/regress-rep-change': [SKIP],
'regress/regress-1117': [SKIP],
'regress/regress-1145': [SKIP],
'regress/regress-1849': [SKIP],
'regress/regress-3247124': [SKIP],
'regress/regress-634': [SKIP],
'regress/regress-91008': [SKIP],
'regress/regress-91010': [SKIP],
'regress/regress-91013': [SKIP],
'regress/regress-99167': [SKIP],
# Long running tests.
'regress/regress-2185': [PASS, ['mode == debug', PASS, TIMEOUT]],
'regress/regress-2185-2': [PASS, TIMEOUT],
2014-03-06 14:15:40 +00:00
'whitespaces': [PASS, TIMEOUT, SLOW],
2014-02-12 09:19:30 +00:00
2014-07-23 13:40:01 +00:00
# BUG(v8:3457).
'deserialize-reference': [PASS, FAIL],
2015-04-08 11:11:29 +00:00
# BUG(v8:4016)
'regress/regress-crbug-467047': [SKIP],
2014-02-28 12:46:13 +00:00
# Slow tests.
'array-concat': [PASS, SLOW],
'array-constructor': [PASS, SLOW],
'array-indexing': [PASS, SLOW],
'array-reduce': [PASS, SLOW],
'array-sort': [PASS, SLOW],
'array-splice': [PASS, SLOW],
'bit-not': [PASS, SLOW],
'compiler/alloc-number': [PASS, SLOW],
'compiler/osr-assert': [PASS, SLOW],
'compiler/osr-with-args': [PASS, SLOW],
'debug-scopes': [PASS, SLOW],
'generated-transition-stub': [PASS, SLOW],
'json2': [PASS, SLOW],
'math-floor-of-div-nosudiv': [PASS, SLOW],
'math-floor-of-div': [PASS, SLOW],
'mirror-object': [PASS, SLOW],
'packed-elements': [PASS, SLOW],
'regress/regress-1122': [PASS, SLOW],
'regress/regress-2185-2': [PASS, SLOW],
'regress/regress-2185': [PASS, SLOW],
'regress/regress-2790': [PASS, SLOW],
'regress/regress-331444': [PASS, SLOW],
'regress/regress-490': [PASS, SLOW],
'regress/regress-crbug-217858': [PASS, SLOW],
'regress/regress-create-exception': [PASS, SLOW],
'regress/regress-json-stringify-gc': [PASS, SLOW],
'string-indexof-2': [PASS, SLOW],
'unicodelctest-no-optimization': [PASS, SLOW],
'unicodelctest': [PASS, SLOW],
'unicode-test': [PASS, SLOW],
2014-03-21 09:28:26 +00:00
}], # 'arch == arm64'
2014-02-12 09:19:30 +00:00
2014-03-21 09:28:26 +00:00
['arch == arm64 and mode == debug and simulator_run == True', {
2014-02-12 09:19:30 +00:00
# Pass but take too long with the simulator in debug mode.
2014-10-20 09:01:14 +00:00
'array-iterate-backwards': [PASS, TIMEOUT],
2014-02-12 09:19:30 +00:00
'array-sort': [PASS, TIMEOUT],
'packed-elements': [SKIP],
'regexp-global': [SKIP],
'compiler/alloc-numbers': [SKIP],
'harmony/symbols': [SKIP],
2014-10-20 09:01:14 +00:00
'math-floor-of-div': [PASS, TIMEOUT],
'math-floor-of-div-nosudiv': [PASS, TIMEOUT],
'unicodelctest': [PASS, TIMEOUT],
'unicodelctest-no-optimization': [PASS, TIMEOUT],
2014-03-17 08:30:04 +00:00
# Issue 3219:
'getters-on-elements': [PASS, ['gc_stress == True', FAIL]],
2014-03-21 09:28:26 +00:00
}], # 'arch == arm64 and mode == debug and simulator_run == True'
2014-02-12 09:19:30 +00:00
2014-01-30 12:52:22 +00:00
##############################################################################
['asan == True', {
# Skip tests not suitable for ASAN.
'big-array-literal': [SKIP],
'big-object-literal': [SKIP],
'regress/regress-crbug-178790': [SKIP],
2015-06-22 21:05:29 +00:00
# Exception thrown during bootstrapping on ASAN builds, see issue 4236.
2015-06-22 18:56:56 +00:00
'regress/regress-1132': [SKIP],
2014-01-30 12:52:22 +00:00
}], # 'asan == True'
2015-04-28 11:18:35 +00:00
##############################################################################
['msan == True', {
# Skip tests not suitable for MSAN.
'big-array-literal': [SKIP],
2015-04-29 07:19:49 +00:00
# ICU upstream issues.
'date': [SKIP],
'deep-recursion': [SKIP],
'regress/regress-builtinbust-7': [SKIP],
'string-localecompare': [SKIP],
}], # 'msan == True'
2015-04-28 11:18:35 +00:00
2010-12-07 11:31:57 +00:00
##############################################################################
2013-09-24 12:08:33 +00:00
['arch == arm or arch == android_arm', {
# Slow tests which times out in debug mode.
'try': [PASS, ['mode == debug', SKIP]],
'debug-scripts-request': [PASS, ['mode == debug', SKIP]],
'array-constructor': [PASS, ['mode == debug', SKIP]],
'regress/regress-1122': [PASS, ['mode == debug and arch == android_arm', SKIP]],
# Flaky test that can hit compilation-time stack overflow in debug mode.
'unicode-test': [PASS, ['mode == debug', PASS, FAIL]],
# Times out often in release mode on ARM.
2014-03-20 12:27:36 +00:00
'compiler/regress-stacktrace-methods': [PASS, ['mode == release', TIMEOUT]],
2013-09-24 12:08:33 +00:00
'array-splice': [PASS, TIMEOUT],
# Long running test.
'string-indexof-2': [PASS, TIMEOUT],
'mirror-object': [PASS, TIMEOUT],
2014-01-24 11:36:45 +00:00
# Long running tests. Skipping because having them timeout takes too long on
# the buildbot.
2014-08-01 13:51:23 +00:00
'big-object-literal': [SKIP],
2013-09-24 12:08:33 +00:00
'compiler/alloc-number': [SKIP],
'regress/regress-490': [SKIP],
'regress/regress-634': [SKIP],
'regress/regress-create-exception': [SKIP],
'regress/regress-3247124': [SKIP],
# Requires bigger stack size in the Genesis and if stack size is increased,
# the test requires too much time to run. However, the problem test covers
# should be platform-independent.
'regress/regress-1132': [SKIP],
# Currently always deopt on minus zero
'math-floor-of-div-minus-zero': [SKIP],
2013-11-26 16:53:04 +00:00
############################################################################
# Slow tests.
'regress/regress-2185-2': [PASS, SLOW],
'mirror-object': [PASS, SLOW],
'compiler/osr-with-args': [PASS, SLOW],
'array-sort': [PASS, SLOW],
'packed-elements': [PASS, SLOW],
'regress/regress-91008': [PASS, SLOW],
'regress/regress-2790': [PASS, SLOW],
'regress/regress-json-stringify-gc': [PASS, SLOW],
'regress/regress-1122': [PASS, SLOW],
2013-09-24 12:08:33 +00:00
}], # 'arch == arm or arch == android_arm'
2012-06-20 14:08:03 +00:00
2010-12-07 11:31:57 +00:00
##############################################################################
2014-04-15 16:39:21 +00:00
['arch == mipsel or arch == mips', {
2013-09-24 12:08:33 +00:00
# Slow tests which times out in debug mode.
'try': [PASS, ['mode == debug', SKIP]],
'debug-scripts-request': [PASS, ['mode == debug', SKIP]],
'array-constructor': [PASS, ['mode == debug', SKIP]],
# Times out often in release mode on MIPS.
2014-03-20 12:27:36 +00:00
'compiler/regress-stacktrace-methods': [PASS, ['mode == release', TIMEOUT]],
2013-09-24 12:08:33 +00:00
'array-splice': [PASS, TIMEOUT],
# Long running test.
'mirror-object': [PASS, TIMEOUT],
'string-indexof-2': [PASS, TIMEOUT],
2014-01-24 11:36:45 +00:00
# Long running tests. Skipping because having them timeout takes too long on
# the buildbot.
2013-09-24 12:08:33 +00:00
'compiler/alloc-number': [SKIP],
'regress/regress-490': [SKIP],
'regress/regress-634': [SKIP],
'regress/regress-create-exception': [SKIP],
'regress/regress-3247124': [SKIP],
# Requires bigger stack size in the Genesis and if stack size is increased,
# the test requires too much time to run. However, the problem test covers
# should be platform-independent.
'regress/regress-1132': [SKIP],
# Currently always deopt on minus zero
'math-floor-of-div-minus-zero': [SKIP],
2014-04-15 16:39:21 +00:00
}], # 'arch == mipsel or arch == mips'
2013-06-17 15:06:41 +00:00
2014-07-09 11:08:26 +00:00
##############################################################################
2014-10-31 13:36:10 +00:00
['arch == mips', {
# Flaky with TF.
'mirror-script': [PASS, NO_VARIANTS],
}], # 'arch == mips'
2015-10-26 10:27:31 +00:00
##############################################################################
['arch == x87', {
# Turbofan will hit the known issue that x87 changes sNaN to qNaN by default.
'regress/regress-undefined-nan': [SKIP],
}], # 'arch == x87'
2014-10-31 13:36:10 +00:00
##############################################################################
2015-09-29 17:23:44 +00:00
['arch == mips64el or arch == mips64', {
2014-07-09 11:08:26 +00:00
# Slow tests which times out in debug mode.
'try': [PASS, ['mode == debug', SKIP]],
'debug-scripts-request': [PASS, ['mode == debug', SKIP]],
'array-constructor': [PASS, ['mode == debug', SKIP]],
# Times out often in release mode on MIPS.
'compiler/regress-stacktrace-methods': [PASS, PASS, ['mode == release', TIMEOUT]],
'array-splice': [PASS, TIMEOUT],
# Long running test.
'mirror-object': [PASS, TIMEOUT],
'string-indexof-2': [PASS, TIMEOUT],
# BUG(3251035): Timeouts in long looping crankshaft optimization
# tests. Skipping because having them timeout takes too long on the
# buildbot.
'compiler/alloc-number': [PASS, SLOW],
'compiler/array-length': [PASS, SLOW],
'compiler/assignment-deopt': [PASS, SLOW],
'compiler/deopt-args': [PASS, SLOW],
'compiler/inline-compare': [PASS, SLOW],
'compiler/inline-global-access': [PASS, SLOW],
'compiler/optimized-function-calls': [PASS, SLOW],
'compiler/pic': [PASS, SLOW],
'compiler/property-calls': [PASS, SLOW],
'compiler/recursive-deopt': [PASS, SLOW],
'compiler/regress-4': [PASS, SLOW],
'compiler/regress-funcaller': [PASS, SLOW],
'compiler/regress-rep-change': [PASS, SLOW],
'compiler/regress-arguments': [PASS, SLOW],
'compiler/regress-funarguments': [PASS, SLOW],
'compiler/regress-3249650': [PASS, SLOW],
'compiler/simple-deopt': [PASS, SLOW],
'regress/regress-490': [PASS, SLOW],
'regress/regress-634': [PASS, SLOW],
'regress/regress-create-exception': [PASS, SLOW],
'regress/regress-3218915': [PASS, SLOW],
'regress/regress-3247124': [PASS, SLOW],
# Requires bigger stack size in the Genesis and if stack size is increased,
# the test requires too much time to run. However, the problem test covers
# should be platform-independent.
'regress/regress-1132': [SKIP],
# Currently always deopt on minus zero
'math-floor-of-div-minus-zero': [SKIP],
2015-09-29 17:23:44 +00:00
}], # 'arch == mips64el or arch == mips64'
2014-07-09 11:08:26 +00:00
2014-07-11 11:20:37 +00:00
##############################################################################
['system == windows', {
2014-09-04 10:04:19 +00:00
# TODO(mstarzinger): Too slow with turbo fan.
'big-object-literal': [PASS, ['mode == debug', SKIP]],
2014-10-17 06:59:02 +00:00
'math-floor-of-div': [PASS, ['mode == debug', SKIP]],
'math-floor-of-div-nosudiv': [PASS, ['mode == debug', SKIP]],
'osr-regress-max-locals': [PASS, ['mode == debug', SKIP]],
'unicodelctest': [PASS, ['mode == debug', SKIP]],
2014-09-04 06:50:55 +00:00
2014-07-11 11:20:37 +00:00
# BUG(v8:3435)
'debug-script-breakpoints': [PASS, FAIL],
2015-10-16 07:10:58 +00:00
# BUG(v8:4495).
'es6/collections': [PASS, ['arch == ia32', FAST_VARIANTS]],
2014-07-11 11:20:37 +00:00
}], # 'system == windows'
2014-07-09 11:08:26 +00:00
2013-04-09 08:39:01 +00:00
##############################################################################
# Native Client uses the ARM simulator so will behave similarly to arm
# on mjsunit tests.
# TODO(bradchen): enable more tests for NaCl V8 when it stops using
# the ARM simulator.
##############################################################################
2013-09-24 12:08:33 +00:00
['arch == nacl_ia32 or arch == nacl_x64', {
# There is no /tmp directory for NaCl runs
'd8-os': [SKIP],
2013-04-09 08:39:01 +00:00
2013-09-24 12:08:33 +00:00
# Stack manipulations in LiveEdit is not implemented for this arch.
'debug-liveedit-check-stack': [SKIP],
'debug-liveedit-stack-padding': [SKIP],
'debug-liveedit-restart-frame': [SKIP],
'debug-liveedit-double-call': [SKIP],
2014-05-22 07:32:59 +00:00
'harmony/generators-debug-liveedit': [SKIP],
2013-04-09 08:39:01 +00:00
2013-09-24 12:08:33 +00:00
# NaCl builds have problems with this test since Pepper_28.
# V8 Issue 2786
'math-exp-precision': [SKIP],
2013-07-18 12:21:46 +00:00
2013-09-24 12:08:33 +00:00
# Requires bigger stack size in the Genesis and if stack size is increased,
# the test requires too much time to run. However, the problem test covers
# should be platform-independent.
'regress/regress-1132': [SKIP],
2013-04-09 08:39:01 +00:00
2013-09-24 12:08:33 +00:00
# Poor performance for NaCl V8 causes an assertion failure for this test.
'regress/regress-165637': [SKIP],
2013-04-09 08:39:01 +00:00
2013-09-24 12:08:33 +00:00
# Skip long running test that times out in debug mode and goes OOM on NaCl.
'regress/regress-crbug-160010': [SKIP],
2013-10-31 11:51:59 +00:00
2014-09-11 11:49:39 +00:00
# Skip tests that timout with turbofan.
'regress/regress-1257': [PASS, NO_VARIANTS],
'regress/regress-2618': [PASS, NO_VARIANTS],
'regress/regress-298269': [PASS, NO_VARIANTS],
'regress/regress-634': [PASS, NO_VARIANTS],
'regress/regress-91008': [PASS, NO_VARIANTS],
'compiler/osr-alignment': [PASS, NO_VARIANTS],
'compiler/osr-one': [PASS, NO_VARIANTS],
'compiler/osr-two': [PASS, NO_VARIANTS],
'stack-traces-overflow': [PASS, NO_VARIANTS],
'mirror-object': [PASS, NO_VARIANTS],
2013-10-31 11:51:59 +00:00
# Bug(v8:2978).
'lithium/MathExp': [PASS, FAIL],
2014-03-21 10:34:07 +00:00
# Lead to OOM:
'string-oom-*': [SKIP],
2014-03-31 07:54:22 +00:00
# Crashes.
'harmony/private': [SKIP],
'harmony/symbols': [SKIP],
2013-09-24 12:08:33 +00:00
}], # 'arch == nacl_ia32 or arch == nacl_x64'
2013-07-24 12:04:29 +00:00
##############################################################################
2013-09-24 12:08:33 +00:00
['deopt_fuzzer == True', {
# Skip tests that are not suitable for deoptimization fuzzing.
'assert-opt-and-deopt': [SKIP],
'never-optimize': [SKIP],
'regress/regress-2185-2': [SKIP],
'readonly': [SKIP],
'array-feedback': [SKIP],
2015-10-15 09:54:38 +00:00
# Bounds check triggers forced deopt for array constructors.
'array-constructor-feedback': [SKIP],
2015-03-26 16:53:47 +00:00
# Deopting uses just enough memory to make this one OOM.
'regress/regress-3976': [SKIP],
2013-09-24 12:08:33 +00:00
# Deopt every n garbage collections collides with deopt every n times.
'regress/regress-2653': [SKIP],
}], # 'deopt_fuzzer == True'
2015-03-03 07:04:41 +00:00
2015-09-17 13:02:01 +00:00
##############################################################################
['predictable == True', {
# Skip tests that are known to be non-deterministic.
'd8-worker-sharedarraybuffer': [SKIP],
}], # 'predictable == True'
2015-03-03 07:04:41 +00:00
##############################################################################
['arch == ppc and simulator_run == True or arch == ppc64 and simulator_run == True', {
# take too long with the simulator.
'regress/regress-1132': [SKIP],
}], # 'arch == ppc and simulator_run == True'
2013-09-24 12:08:33 +00:00
]