v8/test/cctest/libplatform/test-tracing.cc

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

965 lines
34 KiB
C++
Raw Normal View History

// Copyright 2016 the V8 project authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#include <limits>
#include "include/libplatform/v8-tracing.h"
[tracing] Fix races in TracingController implementation The default TracingController (used by d8 and Node) has some concurrency issues. The new test flushes these out, when a second thread logs trace events while the main thread calls StopTracing(). - Use an acquire load in UpdateCategoryGroupEnabledFlags() because this was racing with GetCategoryGroupEnabled() where a new category is added in the slow path. g_category_groups is append-only, but reads/writes to g_category_index need to be correctly ordered so that new categories are added and only then is the change to the index visible. The relaxed load ignored this and caused unsynchronized read/write. - Use a relaxed load in ~ScopedTracer() to access category_group_enabled as this previously used a non-atomic operation which caused a race with UpdateCategoryGroupEnabledFlag() which does a relaxed store. - Replace TracingController::mode_ with an atomic bool as read/writes to mode_ were not synchronized and caused TSAN errors. It only has two states and it doesn't seem like we will extend this so just convert it to bool. - Take the lock around calling trace_object->Initialize in AddTraceEvent(), and around trace_buffer_->Flush() in StopTracing(). These two raced previously as the underlying TraceBufferRingBuffer passes out pointers to TraceObjects in a synchronized way, but the caller (AddTraceEvent) then writes into the object without synchronization. This leads to races when Flush() is called, at which time TraceBufferRingBuffer assumes that all the pointers it handed out are to valid, initialized TraceObjects - which is not true because AddTraceEvent may still be calling Initialize on them. This could be the cause of issues in Node.js where the last line of tracing/logging sometimes gets cut off. This is kind of a band-aid solution - access to the TraceObjects handed out by the ring buffer really needs proper synchronization which at this point would require redesign. It's quite likely we will replace this with Perfetto in the near future so not much point investing in this code right now. - Enable TracingCpuProfiler test which was flaky due to these bugs. Bug: v8:8821 Change-Id: I141296800c6906ac0e7f3f21dd16d861b07dae62 Reviewed-on: https://chromium-review.googlesource.com/c/1477283 Commit-Queue: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Yang Guo <yangguo@chromium.org> Reviewed-by: Ali Ijaz Sheikh <ofrobots@google.com> Cr-Commit-Position: refs/heads/master@{#59752}
2019-02-20 09:02:06 +00:00
#include "src/base/platform/platform.h"
#include "src/libplatform/default-platform.h"
#include "src/tracing/trace-event.h"
#include "test/cctest/cctest.h"
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
#ifdef V8_USE_PERFETTO
#include "perfetto/trace/chrome/chrome_trace_event.pb.h"
#include "perfetto/trace/chrome/chrome_trace_event.pbzero.h"
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
#include "perfetto/trace/chrome/chrome_trace_packet.pb.h"
#include "perfetto/trace/trace.pb.h"
#include "perfetto/tracing.h"
#include "src/libplatform/tracing/json-trace-event-listener.h"
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
#include "src/libplatform/tracing/trace-event-listener.h"
#endif // V8_USE_PERFETTO
#ifdef V8_USE_PERFETTO
class TestDataSource : public perfetto::DataSource<TestDataSource> {
public:
void OnSetup(const SetupArgs&) override {}
void OnStart(const StartArgs&) override { started_.Signal(); }
void OnStop(const StopArgs&) override {}
static v8::base::Semaphore started_;
};
v8::base::Semaphore TestDataSource::started_{0};
PERFETTO_DEFINE_DATA_SOURCE_STATIC_MEMBERS(TestDataSource);
#endif // V8_USE_PERFETTO
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
namespace v8 {
namespace platform {
namespace tracing {
TEST(TestTraceConfig) {
LocalContext env;
TraceConfig* trace_config = new TraceConfig();
trace_config->AddIncludedCategory("v8");
trace_config->AddIncludedCategory(TRACE_DISABLED_BY_DEFAULT("v8.runtime"));
CHECK_EQ(trace_config->IsSystraceEnabled(), false);
CHECK_EQ(trace_config->IsArgumentFilterEnabled(), false);
CHECK_EQ(trace_config->IsCategoryGroupEnabled("v8"), true);
CHECK_EQ(trace_config->IsCategoryGroupEnabled("v8.cpu_profile"), false);
CHECK_EQ(trace_config->IsCategoryGroupEnabled("v8.cpu_profile.hires"), false);
CHECK_EQ(trace_config->IsCategoryGroupEnabled(
TRACE_DISABLED_BY_DEFAULT("v8.runtime")),
true);
CHECK_EQ(trace_config->IsCategoryGroupEnabled("v8,v8.cpu_profile"), true);
CHECK_EQ(
trace_config->IsCategoryGroupEnabled("v8,disabled-by-default-v8.runtime"),
true);
CHECK_EQ(trace_config->IsCategoryGroupEnabled(
"v8_cpu_profile,v8.cpu_profile.hires"),
false);
delete trace_config;
}
TEST(TestTraceObject) {
TraceObject trace_object;
uint8_t category_enabled_flag = 41;
trace_object.Initialize('X', &category_enabled_flag, "Test.Trace",
"Test.Scope", 42, 123, 0, nullptr, nullptr, nullptr,
nullptr, 0, 1729, 4104);
CHECK_EQ('X', trace_object.phase());
CHECK_EQ(category_enabled_flag, *trace_object.category_enabled_flag());
CHECK_EQ(std::string("Test.Trace"), std::string(trace_object.name()));
CHECK_EQ(std::string("Test.Scope"), std::string(trace_object.scope()));
CHECK_EQ(0u, trace_object.duration());
CHECK_EQ(0u, trace_object.cpu_duration());
}
class ConvertableToTraceFormatMock : public v8::ConvertableToTraceFormat {
public:
explicit ConvertableToTraceFormatMock(int value) : value_(value) {}
void AppendAsTraceFormat(std::string* out) const override {
*out += "[" + std::to_string(value_) + "," + std::to_string(value_) + "]";
}
private:
int value_;
DISALLOW_COPY_AND_ASSIGN(ConvertableToTraceFormatMock);
};
class MockTraceWriter : public TraceWriter {
public:
void AppendTraceEvent(TraceObject* trace_event) override {
// TraceObject might not have been initialized.
const char* name = trace_event->name() ? trace_event->name() : "";
events_.push_back(name);
}
void Flush() override {}
std::vector<std::string> events() { return events_; }
private:
std::vector<std::string> events_;
};
TEST(TestTraceBufferRingBuffer) {
// We should be able to add kChunkSize * 2 + 1 trace events.
const int HANDLES_COUNT = TraceBufferChunk::kChunkSize * 2 + 1;
MockTraceWriter* writer = new MockTraceWriter();
TraceBuffer* ring_buffer =
TraceBuffer::CreateTraceBufferRingBuffer(2, writer);
std::string names[HANDLES_COUNT];
for (int i = 0; i < HANDLES_COUNT; ++i) {
names[i] = "Test.EventNo" + std::to_string(i);
}
std::vector<uint64_t> handles(HANDLES_COUNT);
uint8_t category_enabled_flag = 41;
for (size_t i = 0; i < handles.size(); ++i) {
TraceObject* trace_object = ring_buffer->AddTraceEvent(&handles[i]);
CHECK_NOT_NULL(trace_object);
trace_object->Initialize('X', &category_enabled_flag, names[i].c_str(),
"Test.Scope", 42, 123, 0, nullptr, nullptr,
nullptr, nullptr, 0, 1729, 4104);
trace_object = ring_buffer->GetEventByHandle(handles[i]);
CHECK_NOT_NULL(trace_object);
CHECK_EQ('X', trace_object->phase());
CHECK_EQ(names[i], std::string(trace_object->name()));
CHECK_EQ(category_enabled_flag, *trace_object->category_enabled_flag());
}
// We should only be able to retrieve the last kChunkSize + 1.
for (size_t i = 0; i < TraceBufferChunk::kChunkSize; ++i) {
CHECK_NULL(ring_buffer->GetEventByHandle(handles[i]));
}
for (size_t i = TraceBufferChunk::kChunkSize; i < handles.size(); ++i) {
TraceObject* trace_object = ring_buffer->GetEventByHandle(handles[i]);
CHECK_NOT_NULL(trace_object);
// The object properties should be correct.
CHECK_EQ('X', trace_object->phase());
CHECK_EQ(names[i], std::string(trace_object->name()));
CHECK_EQ(category_enabled_flag, *trace_object->category_enabled_flag());
}
// Check Flush(), that the writer wrote the last kChunkSize 1 event names.
ring_buffer->Flush();
auto events = writer->events();
CHECK_EQ(TraceBufferChunk::kChunkSize + 1, events.size());
for (size_t i = TraceBufferChunk::kChunkSize; i < handles.size(); ++i) {
CHECK_EQ(names[i], events[i - TraceBufferChunk::kChunkSize]);
}
delete ring_buffer;
}
void PopulateJSONWriter(TraceWriter* writer) {
v8::Platform* old_platform = i::V8::GetCurrentPlatform();
std::unique_ptr<v8::Platform> default_platform(
v8::platform::NewDefaultPlatform());
i::V8::SetPlatformForTesting(default_platform.get());
auto tracing = base::make_unique<v8::platform::tracing::TracingController>();
v8::platform::tracing::TracingController* tracing_controller = tracing.get();
static_cast<v8::platform::DefaultPlatform*>(default_platform.get())
->SetTracingController(std::move(tracing));
TraceBuffer* ring_buffer =
TraceBuffer::CreateTraceBufferRingBuffer(1, writer);
tracing_controller->Initialize(ring_buffer);
#ifdef V8_USE_PERFETTO
std::ostringstream sstream;
tracing_controller->InitializeForPerfetto(&sstream);
#endif
TraceConfig* trace_config = new TraceConfig();
trace_config->AddIncludedCategory("v8-cat");
tracing_controller->StartTracing(trace_config);
TraceObject trace_object;
trace_object.InitializeForTesting(
'X', tracing_controller->GetCategoryGroupEnabled("v8-cat"), "Test0",
v8::internal::tracing::kGlobalScope, 42, 0x1234, 0, nullptr, nullptr,
nullptr, nullptr, TRACE_EVENT_FLAG_HAS_ID, 11, 22, 100, 50, 33, 44);
writer->AppendTraceEvent(&trace_object);
trace_object.InitializeForTesting(
'Y', tracing_controller->GetCategoryGroupEnabled("v8-cat"), "Test1",
v8::internal::tracing::kGlobalScope, 43, 0x5678, 0, nullptr, nullptr,
nullptr, nullptr, TRACE_EVENT_FLAG_FLOW_IN | TRACE_EVENT_FLAG_FLOW_OUT,
55, 66, 110, 55, 77, 88);
writer->AppendTraceEvent(&trace_object);
tracing_controller->StopTracing();
i::V8::SetPlatformForTesting(old_platform);
}
TEST(TestJSONTraceWriter) {
std::ostringstream stream;
TraceWriter* writer = TraceWriter::CreateJSONTraceWriter(stream);
PopulateJSONWriter(writer);
std::string trace_str = stream.str();
std::string expected_trace_str =
"{\"traceEvents\":[{\"pid\":11,\"tid\":22,\"ts\":100,\"tts\":50,"
"\"ph\":\"X\",\"cat\":\"v8-cat\",\"name\":\"Test0\",\"dur\":33,"
"\"tdur\":44,\"id\":\"0x2a\",\"args\":{}},{\"pid\":55,\"tid\":66,"
"\"ts\":110,\"tts\":55,\"ph\":\"Y\",\"cat\":\"v8-cat\",\"name\":"
"\"Test1\",\"dur\":77,\"tdur\":88,\"bind_id\":\"0x5678\","
"\"flow_in\":true,\"flow_out\":true,\"args\":{}}]}";
CHECK_EQ(expected_trace_str, trace_str);
}
TEST(TestJSONTraceWriterWithCustomtag) {
std::ostringstream stream;
TraceWriter* writer = TraceWriter::CreateJSONTraceWriter(stream, "customTag");
PopulateJSONWriter(writer);
std::string trace_str = stream.str();
std::string expected_trace_str =
"{\"customTag\":[{\"pid\":11,\"tid\":22,\"ts\":100,\"tts\":50,"
"\"ph\":\"X\",\"cat\":\"v8-cat\",\"name\":\"Test0\",\"dur\":33,"
"\"tdur\":44,\"id\":\"0x2a\",\"args\":{}},{\"pid\":55,\"tid\":66,"
"\"ts\":110,\"tts\":55,\"ph\":\"Y\",\"cat\":\"v8-cat\",\"name\":"
"\"Test1\",\"dur\":77,\"tdur\":88,\"bind_id\":\"0x5678\","
"\"flow_in\":true,\"flow_out\":true,\"args\":{}}]}";
CHECK_EQ(expected_trace_str, trace_str);
}
void GetJSONStrings(std::vector<std::string>* ret, const std::string& str,
const std::string& param, const std::string& start_delim,
const std::string& end_delim) {
size_t pos = str.find(param);
while (pos != std::string::npos) {
size_t start_pos = str.find(start_delim, pos + param.length());
size_t end_pos = str.find(end_delim, start_pos + 1);
CHECK_NE(start_pos, std::string::npos);
CHECK_NE(end_pos, std::string::npos);
ret->push_back(str.substr(start_pos + 1, end_pos - start_pos - 1));
pos = str.find(param, pos + 1);
}
}
#ifndef V8_USE_PERFETTO
TEST(TestTracingController) {
v8::Platform* old_platform = i::V8::GetCurrentPlatform();
std::unique_ptr<v8::Platform> default_platform(
v8::platform::NewDefaultPlatform());
i::V8::SetPlatformForTesting(default_platform.get());
auto tracing = base::make_unique<v8::platform::tracing::TracingController>();
v8::platform::tracing::TracingController* tracing_controller = tracing.get();
static_cast<v8::platform::DefaultPlatform*>(default_platform.get())
->SetTracingController(std::move(tracing));
MockTraceWriter* writer = new MockTraceWriter();
TraceBuffer* ring_buffer =
TraceBuffer::CreateTraceBufferRingBuffer(1, writer);
tracing_controller->Initialize(ring_buffer);
#ifdef V8_USE_PERFETTO
std::ostringstream sstream;
tracing_controller->InitializeForPerfetto(&sstream);
#endif
TraceConfig* trace_config = new TraceConfig();
trace_config->AddIncludedCategory("v8");
tracing_controller->StartTracing(trace_config);
TRACE_EVENT0("v8", "v8.Test");
// cat category is not included in default config
TRACE_EVENT0("cat", "v8.Test2");
TRACE_EVENT0("v8", "v8.Test3");
tracing_controller->StopTracing();
CHECK_EQ(2u, writer->events().size());
CHECK_EQ(std::string("v8.Test"), writer->events()[0]);
CHECK_EQ(std::string("v8.Test3"), writer->events()[1]);
i::V8::SetPlatformForTesting(old_platform);
}
TEST(TestTracingControllerMultipleArgsAndCopy) {
std::ostringstream stream, perfetto_stream;
uint64_t aa = 11;
unsigned int bb = 22;
uint16_t cc = 33;
unsigned char dd = 44;
int64_t ee = -55;
int ff = -66;
int16_t gg = -77;
signed char hh = -88;
bool ii1 = true;
bool ii2 = false;
double jj1 = 99.0;
double jj2 = 1e100;
double jj3 = std::numeric_limits<double>::quiet_NaN();
double jj4 = std::numeric_limits<double>::infinity();
double jj5 = -std::numeric_limits<double>::infinity();
void* kk = &aa;
const char* ll = "100";
std::string mm = "INIT";
std::string mmm = "\"INIT\"";
// Create a scope for the tracing controller to terminate the trace writer.
{
v8::Platform* old_platform = i::V8::GetCurrentPlatform();
std::unique_ptr<v8::Platform> default_platform(
v8::platform::NewDefaultPlatform());
i::V8::SetPlatformForTesting(default_platform.get());
auto tracing =
base::make_unique<v8::platform::tracing::TracingController>();
v8::platform::tracing::TracingController* tracing_controller =
tracing.get();
static_cast<v8::platform::DefaultPlatform*>(default_platform.get())
->SetTracingController(std::move(tracing));
TraceWriter* writer = TraceWriter::CreateJSONTraceWriter(stream);
TraceBuffer* ring_buffer =
TraceBuffer::CreateTraceBufferRingBuffer(1, writer);
tracing_controller->Initialize(ring_buffer);
#ifdef V8_USE_PERFETTO
tracing_controller->InitializeForPerfetto(&perfetto_stream);
#endif
TraceConfig* trace_config = new TraceConfig();
trace_config->AddIncludedCategory("v8");
tracing_controller->StartTracing(trace_config);
{
TRACE_EVENT1("v8", "v8.Test.aa", "aa", aa);
TRACE_EVENT1("v8", "v8.Test.bb", "bb", bb);
TRACE_EVENT1("v8", "v8.Test.cc", "cc", cc);
TRACE_EVENT1("v8", "v8.Test.dd", "dd", dd);
TRACE_EVENT1("v8", "v8.Test.ee", "ee", ee);
TRACE_EVENT1("v8", "v8.Test.ff", "ff", ff);
TRACE_EVENT1("v8", "v8.Test.gg", "gg", gg);
TRACE_EVENT1("v8", "v8.Test.hh", "hh", hh);
TRACE_EVENT1("v8", "v8.Test.ii", "ii1", ii1);
TRACE_EVENT1("v8", "v8.Test.ii", "ii2", ii2);
TRACE_EVENT1("v8", "v8.Test.jj1", "jj1", jj1);
TRACE_EVENT1("v8", "v8.Test.jj2", "jj2", jj2);
TRACE_EVENT1("v8", "v8.Test.jj3", "jj3", jj3);
TRACE_EVENT1("v8", "v8.Test.jj4", "jj4", jj4);
TRACE_EVENT1("v8", "v8.Test.jj5", "jj5", jj5);
TRACE_EVENT1("v8", "v8.Test.kk", "kk", kk);
TRACE_EVENT1("v8", "v8.Test.ll", "ll", ll);
TRACE_EVENT1("v8", "v8.Test.mm", "mm", TRACE_STR_COPY(mmm.c_str()));
TRACE_EVENT2("v8", "v8.Test2.1", "aa", aa, "ll", ll);
TRACE_EVENT2("v8", "v8.Test2.2", "mm1", TRACE_STR_COPY(mm.c_str()), "mm2",
TRACE_STR_COPY(mmm.c_str()));
// Check copies are correct.
TRACE_EVENT_COPY_INSTANT0("v8", mm.c_str(), TRACE_EVENT_SCOPE_THREAD);
TRACE_EVENT_COPY_INSTANT2("v8", mm.c_str(), TRACE_EVENT_SCOPE_THREAD,
"mm1", mm.c_str(), "mm2", mmm.c_str());
mm = "CHANGED";
mmm = "CHANGED";
TRACE_EVENT_INSTANT1("v8", "v8.Test", TRACE_EVENT_SCOPE_THREAD, "a1",
new ConvertableToTraceFormatMock(42));
std::unique_ptr<ConvertableToTraceFormatMock> trace_event_arg(
new ConvertableToTraceFormatMock(42));
TRACE_EVENT_INSTANT2("v8", "v8.Test", TRACE_EVENT_SCOPE_THREAD, "a1",
std::move(trace_event_arg), "a2",
new ConvertableToTraceFormatMock(123));
}
tracing_controller->StopTracing();
i::V8::SetPlatformForTesting(old_platform);
}
std::string trace_str = stream.str();
std::vector<std::string> all_args, all_names, all_cats;
GetJSONStrings(&all_args, trace_str, "\"args\"", "{", "}");
GetJSONStrings(&all_names, trace_str, "\"name\"", "\"", "\"");
GetJSONStrings(&all_cats, trace_str, "\"cat\"", "\"", "\"");
CHECK_EQ(all_args.size(), 24u);
CHECK_EQ(all_args[0], "\"aa\":11");
CHECK_EQ(all_args[1], "\"bb\":22");
CHECK_EQ(all_args[2], "\"cc\":33");
CHECK_EQ(all_args[3], "\"dd\":44");
CHECK_EQ(all_args[4], "\"ee\":-55");
CHECK_EQ(all_args[5], "\"ff\":-66");
CHECK_EQ(all_args[6], "\"gg\":-77");
CHECK_EQ(all_args[7], "\"hh\":-88");
CHECK_EQ(all_args[8], "\"ii1\":true");
CHECK_EQ(all_args[9], "\"ii2\":false");
CHECK_EQ(all_args[10], "\"jj1\":99.0");
CHECK_EQ(all_args[11], "\"jj2\":1e+100");
CHECK_EQ(all_args[12], "\"jj3\":\"NaN\"");
CHECK_EQ(all_args[13], "\"jj4\":\"Infinity\"");
CHECK_EQ(all_args[14], "\"jj5\":\"-Infinity\"");
std::ostringstream pointer_stream;
pointer_stream << "\"kk\":\"" << &aa << "\"";
CHECK_EQ(all_args[15], pointer_stream.str());
CHECK_EQ(all_args[16], "\"ll\":\"100\"");
CHECK_EQ(all_args[17], "\"mm\":\"\\\"INIT\\\"\"");
CHECK_EQ(all_names[18], "v8.Test2.1");
CHECK_EQ(all_args[18], "\"aa\":11,\"ll\":\"100\"");
CHECK_EQ(all_args[19], "\"mm1\":\"INIT\",\"mm2\":\"\\\"INIT\\\"\"");
CHECK_EQ(all_names[20], "INIT");
CHECK_EQ(all_names[21], "INIT");
CHECK_EQ(all_args[21], "\"mm1\":\"INIT\",\"mm2\":\"\\\"INIT\\\"\"");
CHECK_EQ(all_args[22], "\"a1\":[42,42]");
CHECK_EQ(all_args[23], "\"a1\":[42,42],\"a2\":[123,123]");
}
#endif // !V8_USE_PERFETTO
namespace {
class TraceStateObserverImpl : public TracingController::TraceStateObserver {
public:
void OnTraceEnabled() override { ++enabled_count; }
void OnTraceDisabled() override { ++disabled_count; }
int enabled_count = 0;
int disabled_count = 0;
};
} // namespace
TEST(TracingObservers) {
v8::Platform* old_platform = i::V8::GetCurrentPlatform();
std::unique_ptr<v8::Platform> default_platform(
v8::platform::NewDefaultPlatform());
i::V8::SetPlatformForTesting(default_platform.get());
auto tracing = base::make_unique<v8::platform::tracing::TracingController>();
v8::platform::tracing::TracingController* tracing_controller = tracing.get();
static_cast<v8::platform::DefaultPlatform*>(default_platform.get())
->SetTracingController(std::move(tracing));
MockTraceWriter* writer = new MockTraceWriter();
v8::platform::tracing::TraceBuffer* ring_buffer =
v8::platform::tracing::TraceBuffer::CreateTraceBufferRingBuffer(1,
writer);
tracing_controller->Initialize(ring_buffer);
#ifdef V8_USE_PERFETTO
std::ostringstream sstream;
tracing_controller->InitializeForPerfetto(&sstream);
#endif
v8::platform::tracing::TraceConfig* trace_config =
new v8::platform::tracing::TraceConfig();
trace_config->AddIncludedCategory("v8");
TraceStateObserverImpl observer;
tracing_controller->AddTraceStateObserver(&observer);
CHECK_EQ(0, observer.enabled_count);
CHECK_EQ(0, observer.disabled_count);
tracing_controller->StartTracing(trace_config);
CHECK_EQ(1, observer.enabled_count);
CHECK_EQ(0, observer.disabled_count);
TraceStateObserverImpl observer2;
tracing_controller->AddTraceStateObserver(&observer2);
CHECK_EQ(1, observer2.enabled_count);
CHECK_EQ(0, observer2.disabled_count);
tracing_controller->RemoveTraceStateObserver(&observer2);
CHECK_EQ(1, observer2.enabled_count);
CHECK_EQ(0, observer2.disabled_count);
tracing_controller->StopTracing();
CHECK_EQ(1, observer.enabled_count);
CHECK_EQ(1, observer.disabled_count);
CHECK_EQ(1, observer2.enabled_count);
CHECK_EQ(0, observer2.disabled_count);
tracing_controller->RemoveTraceStateObserver(&observer);
CHECK_EQ(1, observer.enabled_count);
CHECK_EQ(1, observer.disabled_count);
trace_config = new v8::platform::tracing::TraceConfig();
tracing_controller->StartTracing(trace_config);
tracing_controller->StopTracing();
CHECK_EQ(1, observer.enabled_count);
CHECK_EQ(1, observer.disabled_count);
i::V8::SetPlatformForTesting(old_platform);
}
[tracing] Fix races in TracingController implementation The default TracingController (used by d8 and Node) has some concurrency issues. The new test flushes these out, when a second thread logs trace events while the main thread calls StopTracing(). - Use an acquire load in UpdateCategoryGroupEnabledFlags() because this was racing with GetCategoryGroupEnabled() where a new category is added in the slow path. g_category_groups is append-only, but reads/writes to g_category_index need to be correctly ordered so that new categories are added and only then is the change to the index visible. The relaxed load ignored this and caused unsynchronized read/write. - Use a relaxed load in ~ScopedTracer() to access category_group_enabled as this previously used a non-atomic operation which caused a race with UpdateCategoryGroupEnabledFlag() which does a relaxed store. - Replace TracingController::mode_ with an atomic bool as read/writes to mode_ were not synchronized and caused TSAN errors. It only has two states and it doesn't seem like we will extend this so just convert it to bool. - Take the lock around calling trace_object->Initialize in AddTraceEvent(), and around trace_buffer_->Flush() in StopTracing(). These two raced previously as the underlying TraceBufferRingBuffer passes out pointers to TraceObjects in a synchronized way, but the caller (AddTraceEvent) then writes into the object without synchronization. This leads to races when Flush() is called, at which time TraceBufferRingBuffer assumes that all the pointers it handed out are to valid, initialized TraceObjects - which is not true because AddTraceEvent may still be calling Initialize on them. This could be the cause of issues in Node.js where the last line of tracing/logging sometimes gets cut off. This is kind of a band-aid solution - access to the TraceObjects handed out by the ring buffer really needs proper synchronization which at this point would require redesign. It's quite likely we will replace this with Perfetto in the near future so not much point investing in this code right now. - Enable TracingCpuProfiler test which was flaky due to these bugs. Bug: v8:8821 Change-Id: I141296800c6906ac0e7f3f21dd16d861b07dae62 Reviewed-on: https://chromium-review.googlesource.com/c/1477283 Commit-Queue: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Yang Guo <yangguo@chromium.org> Reviewed-by: Ali Ijaz Sheikh <ofrobots@google.com> Cr-Commit-Position: refs/heads/master@{#59752}
2019-02-20 09:02:06 +00:00
class TraceWritingThread : public base::Thread {
public:
TraceWritingThread(
v8::platform::tracing::TracingController* tracing_controller)
: base::Thread(base::Thread::Options("TraceWritingThread")),
tracing_controller_(tracing_controller) {}
void Run() override {
running_.store(true);
while (running_.load()) {
[tracing] Fix races in TracingController implementation The default TracingController (used by d8 and Node) has some concurrency issues. The new test flushes these out, when a second thread logs trace events while the main thread calls StopTracing(). - Use an acquire load in UpdateCategoryGroupEnabledFlags() because this was racing with GetCategoryGroupEnabled() where a new category is added in the slow path. g_category_groups is append-only, but reads/writes to g_category_index need to be correctly ordered so that new categories are added and only then is the change to the index visible. The relaxed load ignored this and caused unsynchronized read/write. - Use a relaxed load in ~ScopedTracer() to access category_group_enabled as this previously used a non-atomic operation which caused a race with UpdateCategoryGroupEnabledFlag() which does a relaxed store. - Replace TracingController::mode_ with an atomic bool as read/writes to mode_ were not synchronized and caused TSAN errors. It only has two states and it doesn't seem like we will extend this so just convert it to bool. - Take the lock around calling trace_object->Initialize in AddTraceEvent(), and around trace_buffer_->Flush() in StopTracing(). These two raced previously as the underlying TraceBufferRingBuffer passes out pointers to TraceObjects in a synchronized way, but the caller (AddTraceEvent) then writes into the object without synchronization. This leads to races when Flush() is called, at which time TraceBufferRingBuffer assumes that all the pointers it handed out are to valid, initialized TraceObjects - which is not true because AddTraceEvent may still be calling Initialize on them. This could be the cause of issues in Node.js where the last line of tracing/logging sometimes gets cut off. This is kind of a band-aid solution - access to the TraceObjects handed out by the ring buffer really needs proper synchronization which at this point would require redesign. It's quite likely we will replace this with Perfetto in the near future so not much point investing in this code right now. - Enable TracingCpuProfiler test which was flaky due to these bugs. Bug: v8:8821 Change-Id: I141296800c6906ac0e7f3f21dd16d861b07dae62 Reviewed-on: https://chromium-review.googlesource.com/c/1477283 Commit-Queue: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Yang Guo <yangguo@chromium.org> Reviewed-by: Ali Ijaz Sheikh <ofrobots@google.com> Cr-Commit-Position: refs/heads/master@{#59752}
2019-02-20 09:02:06 +00:00
TRACE_EVENT0("v8", "v8.Test");
tracing_controller_->AddTraceEvent('A', nullptr, "v8", "", 1, 1, 0,
nullptr, nullptr, nullptr, nullptr, 0);
tracing_controller_->AddTraceEventWithTimestamp('A', nullptr, "v8", "", 1,
1, 0, nullptr, nullptr,
nullptr, nullptr, 0, 0);
}
}
void Stop() { running_.store(false); }
[tracing] Fix races in TracingController implementation The default TracingController (used by d8 and Node) has some concurrency issues. The new test flushes these out, when a second thread logs trace events while the main thread calls StopTracing(). - Use an acquire load in UpdateCategoryGroupEnabledFlags() because this was racing with GetCategoryGroupEnabled() where a new category is added in the slow path. g_category_groups is append-only, but reads/writes to g_category_index need to be correctly ordered so that new categories are added and only then is the change to the index visible. The relaxed load ignored this and caused unsynchronized read/write. - Use a relaxed load in ~ScopedTracer() to access category_group_enabled as this previously used a non-atomic operation which caused a race with UpdateCategoryGroupEnabledFlag() which does a relaxed store. - Replace TracingController::mode_ with an atomic bool as read/writes to mode_ were not synchronized and caused TSAN errors. It only has two states and it doesn't seem like we will extend this so just convert it to bool. - Take the lock around calling trace_object->Initialize in AddTraceEvent(), and around trace_buffer_->Flush() in StopTracing(). These two raced previously as the underlying TraceBufferRingBuffer passes out pointers to TraceObjects in a synchronized way, but the caller (AddTraceEvent) then writes into the object without synchronization. This leads to races when Flush() is called, at which time TraceBufferRingBuffer assumes that all the pointers it handed out are to valid, initialized TraceObjects - which is not true because AddTraceEvent may still be calling Initialize on them. This could be the cause of issues in Node.js where the last line of tracing/logging sometimes gets cut off. This is kind of a band-aid solution - access to the TraceObjects handed out by the ring buffer really needs proper synchronization which at this point would require redesign. It's quite likely we will replace this with Perfetto in the near future so not much point investing in this code right now. - Enable TracingCpuProfiler test which was flaky due to these bugs. Bug: v8:8821 Change-Id: I141296800c6906ac0e7f3f21dd16d861b07dae62 Reviewed-on: https://chromium-review.googlesource.com/c/1477283 Commit-Queue: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Yang Guo <yangguo@chromium.org> Reviewed-by: Ali Ijaz Sheikh <ofrobots@google.com> Cr-Commit-Position: refs/heads/master@{#59752}
2019-02-20 09:02:06 +00:00
private:
std::atomic_bool running_{false};
[tracing] Fix races in TracingController implementation The default TracingController (used by d8 and Node) has some concurrency issues. The new test flushes these out, when a second thread logs trace events while the main thread calls StopTracing(). - Use an acquire load in UpdateCategoryGroupEnabledFlags() because this was racing with GetCategoryGroupEnabled() where a new category is added in the slow path. g_category_groups is append-only, but reads/writes to g_category_index need to be correctly ordered so that new categories are added and only then is the change to the index visible. The relaxed load ignored this and caused unsynchronized read/write. - Use a relaxed load in ~ScopedTracer() to access category_group_enabled as this previously used a non-atomic operation which caused a race with UpdateCategoryGroupEnabledFlag() which does a relaxed store. - Replace TracingController::mode_ with an atomic bool as read/writes to mode_ were not synchronized and caused TSAN errors. It only has two states and it doesn't seem like we will extend this so just convert it to bool. - Take the lock around calling trace_object->Initialize in AddTraceEvent(), and around trace_buffer_->Flush() in StopTracing(). These two raced previously as the underlying TraceBufferRingBuffer passes out pointers to TraceObjects in a synchronized way, but the caller (AddTraceEvent) then writes into the object without synchronization. This leads to races when Flush() is called, at which time TraceBufferRingBuffer assumes that all the pointers it handed out are to valid, initialized TraceObjects - which is not true because AddTraceEvent may still be calling Initialize on them. This could be the cause of issues in Node.js where the last line of tracing/logging sometimes gets cut off. This is kind of a band-aid solution - access to the TraceObjects handed out by the ring buffer really needs proper synchronization which at this point would require redesign. It's quite likely we will replace this with Perfetto in the near future so not much point investing in this code right now. - Enable TracingCpuProfiler test which was flaky due to these bugs. Bug: v8:8821 Change-Id: I141296800c6906ac0e7f3f21dd16d861b07dae62 Reviewed-on: https://chromium-review.googlesource.com/c/1477283 Commit-Queue: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Yang Guo <yangguo@chromium.org> Reviewed-by: Ali Ijaz Sheikh <ofrobots@google.com> Cr-Commit-Position: refs/heads/master@{#59752}
2019-02-20 09:02:06 +00:00
v8::platform::tracing::TracingController* tracing_controller_;
};
TEST(AddTraceEventMultiThreaded) {
v8::Platform* old_platform = i::V8::GetCurrentPlatform();
std::unique_ptr<v8::Platform> default_platform(
v8::platform::NewDefaultPlatform());
i::V8::SetPlatformForTesting(default_platform.get());
auto tracing = base::make_unique<v8::platform::tracing::TracingController>();
v8::platform::tracing::TracingController* tracing_controller = tracing.get();
static_cast<v8::platform::DefaultPlatform*>(default_platform.get())
->SetTracingController(std::move(tracing));
MockTraceWriter* writer = new MockTraceWriter();
TraceBuffer* ring_buffer =
TraceBuffer::CreateTraceBufferRingBuffer(1, writer);
tracing_controller->Initialize(ring_buffer);
#ifdef V8_USE_PERFETTO
std::ostringstream sstream;
tracing_controller->InitializeForPerfetto(&sstream);
#endif
[tracing] Fix races in TracingController implementation The default TracingController (used by d8 and Node) has some concurrency issues. The new test flushes these out, when a second thread logs trace events while the main thread calls StopTracing(). - Use an acquire load in UpdateCategoryGroupEnabledFlags() because this was racing with GetCategoryGroupEnabled() where a new category is added in the slow path. g_category_groups is append-only, but reads/writes to g_category_index need to be correctly ordered so that new categories are added and only then is the change to the index visible. The relaxed load ignored this and caused unsynchronized read/write. - Use a relaxed load in ~ScopedTracer() to access category_group_enabled as this previously used a non-atomic operation which caused a race with UpdateCategoryGroupEnabledFlag() which does a relaxed store. - Replace TracingController::mode_ with an atomic bool as read/writes to mode_ were not synchronized and caused TSAN errors. It only has two states and it doesn't seem like we will extend this so just convert it to bool. - Take the lock around calling trace_object->Initialize in AddTraceEvent(), and around trace_buffer_->Flush() in StopTracing(). These two raced previously as the underlying TraceBufferRingBuffer passes out pointers to TraceObjects in a synchronized way, but the caller (AddTraceEvent) then writes into the object without synchronization. This leads to races when Flush() is called, at which time TraceBufferRingBuffer assumes that all the pointers it handed out are to valid, initialized TraceObjects - which is not true because AddTraceEvent may still be calling Initialize on them. This could be the cause of issues in Node.js where the last line of tracing/logging sometimes gets cut off. This is kind of a band-aid solution - access to the TraceObjects handed out by the ring buffer really needs proper synchronization which at this point would require redesign. It's quite likely we will replace this with Perfetto in the near future so not much point investing in this code right now. - Enable TracingCpuProfiler test which was flaky due to these bugs. Bug: v8:8821 Change-Id: I141296800c6906ac0e7f3f21dd16d861b07dae62 Reviewed-on: https://chromium-review.googlesource.com/c/1477283 Commit-Queue: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Yang Guo <yangguo@chromium.org> Reviewed-by: Ali Ijaz Sheikh <ofrobots@google.com> Cr-Commit-Position: refs/heads/master@{#59752}
2019-02-20 09:02:06 +00:00
TraceConfig* trace_config = new TraceConfig();
trace_config->AddIncludedCategory("v8");
tracing_controller->StartTracing(trace_config);
TraceWritingThread thread(tracing_controller);
thread.StartSynchronously();
TRACE_EVENT0("v8", "v8.Test2");
TRACE_EVENT0("v8", "v8.Test2");
[tracing] Fix races in TracingController implementation The default TracingController (used by d8 and Node) has some concurrency issues. The new test flushes these out, when a second thread logs trace events while the main thread calls StopTracing(). - Use an acquire load in UpdateCategoryGroupEnabledFlags() because this was racing with GetCategoryGroupEnabled() where a new category is added in the slow path. g_category_groups is append-only, but reads/writes to g_category_index need to be correctly ordered so that new categories are added and only then is the change to the index visible. The relaxed load ignored this and caused unsynchronized read/write. - Use a relaxed load in ~ScopedTracer() to access category_group_enabled as this previously used a non-atomic operation which caused a race with UpdateCategoryGroupEnabledFlag() which does a relaxed store. - Replace TracingController::mode_ with an atomic bool as read/writes to mode_ were not synchronized and caused TSAN errors. It only has two states and it doesn't seem like we will extend this so just convert it to bool. - Take the lock around calling trace_object->Initialize in AddTraceEvent(), and around trace_buffer_->Flush() in StopTracing(). These two raced previously as the underlying TraceBufferRingBuffer passes out pointers to TraceObjects in a synchronized way, but the caller (AddTraceEvent) then writes into the object without synchronization. This leads to races when Flush() is called, at which time TraceBufferRingBuffer assumes that all the pointers it handed out are to valid, initialized TraceObjects - which is not true because AddTraceEvent may still be calling Initialize on them. This could be the cause of issues in Node.js where the last line of tracing/logging sometimes gets cut off. This is kind of a band-aid solution - access to the TraceObjects handed out by the ring buffer really needs proper synchronization which at this point would require redesign. It's quite likely we will replace this with Perfetto in the near future so not much point investing in this code right now. - Enable TracingCpuProfiler test which was flaky due to these bugs. Bug: v8:8821 Change-Id: I141296800c6906ac0e7f3f21dd16d861b07dae62 Reviewed-on: https://chromium-review.googlesource.com/c/1477283 Commit-Queue: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Yang Guo <yangguo@chromium.org> Reviewed-by: Ali Ijaz Sheikh <ofrobots@google.com> Cr-Commit-Position: refs/heads/master@{#59752}
2019-02-20 09:02:06 +00:00
base::OS::Sleep(base::TimeDelta::FromMilliseconds(10));
[tracing] Fix races in TracingController implementation The default TracingController (used by d8 and Node) has some concurrency issues. The new test flushes these out, when a second thread logs trace events while the main thread calls StopTracing(). - Use an acquire load in UpdateCategoryGroupEnabledFlags() because this was racing with GetCategoryGroupEnabled() where a new category is added in the slow path. g_category_groups is append-only, but reads/writes to g_category_index need to be correctly ordered so that new categories are added and only then is the change to the index visible. The relaxed load ignored this and caused unsynchronized read/write. - Use a relaxed load in ~ScopedTracer() to access category_group_enabled as this previously used a non-atomic operation which caused a race with UpdateCategoryGroupEnabledFlag() which does a relaxed store. - Replace TracingController::mode_ with an atomic bool as read/writes to mode_ were not synchronized and caused TSAN errors. It only has two states and it doesn't seem like we will extend this so just convert it to bool. - Take the lock around calling trace_object->Initialize in AddTraceEvent(), and around trace_buffer_->Flush() in StopTracing(). These two raced previously as the underlying TraceBufferRingBuffer passes out pointers to TraceObjects in a synchronized way, but the caller (AddTraceEvent) then writes into the object without synchronization. This leads to races when Flush() is called, at which time TraceBufferRingBuffer assumes that all the pointers it handed out are to valid, initialized TraceObjects - which is not true because AddTraceEvent may still be calling Initialize on them. This could be the cause of issues in Node.js where the last line of tracing/logging sometimes gets cut off. This is kind of a band-aid solution - access to the TraceObjects handed out by the ring buffer really needs proper synchronization which at this point would require redesign. It's quite likely we will replace this with Perfetto in the near future so not much point investing in this code right now. - Enable TracingCpuProfiler test which was flaky due to these bugs. Bug: v8:8821 Change-Id: I141296800c6906ac0e7f3f21dd16d861b07dae62 Reviewed-on: https://chromium-review.googlesource.com/c/1477283 Commit-Queue: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Yang Guo <yangguo@chromium.org> Reviewed-by: Ali Ijaz Sheikh <ofrobots@google.com> Cr-Commit-Position: refs/heads/master@{#59752}
2019-02-20 09:02:06 +00:00
tracing_controller->StopTracing();
thread.Stop();
[tracing] Fix races in TracingController implementation The default TracingController (used by d8 and Node) has some concurrency issues. The new test flushes these out, when a second thread logs trace events while the main thread calls StopTracing(). - Use an acquire load in UpdateCategoryGroupEnabledFlags() because this was racing with GetCategoryGroupEnabled() where a new category is added in the slow path. g_category_groups is append-only, but reads/writes to g_category_index need to be correctly ordered so that new categories are added and only then is the change to the index visible. The relaxed load ignored this and caused unsynchronized read/write. - Use a relaxed load in ~ScopedTracer() to access category_group_enabled as this previously used a non-atomic operation which caused a race with UpdateCategoryGroupEnabledFlag() which does a relaxed store. - Replace TracingController::mode_ with an atomic bool as read/writes to mode_ were not synchronized and caused TSAN errors. It only has two states and it doesn't seem like we will extend this so just convert it to bool. - Take the lock around calling trace_object->Initialize in AddTraceEvent(), and around trace_buffer_->Flush() in StopTracing(). These two raced previously as the underlying TraceBufferRingBuffer passes out pointers to TraceObjects in a synchronized way, but the caller (AddTraceEvent) then writes into the object without synchronization. This leads to races when Flush() is called, at which time TraceBufferRingBuffer assumes that all the pointers it handed out are to valid, initialized TraceObjects - which is not true because AddTraceEvent may still be calling Initialize on them. This could be the cause of issues in Node.js where the last line of tracing/logging sometimes gets cut off. This is kind of a band-aid solution - access to the TraceObjects handed out by the ring buffer really needs proper synchronization which at this point would require redesign. It's quite likely we will replace this with Perfetto in the near future so not much point investing in this code right now. - Enable TracingCpuProfiler test which was flaky due to these bugs. Bug: v8:8821 Change-Id: I141296800c6906ac0e7f3f21dd16d861b07dae62 Reviewed-on: https://chromium-review.googlesource.com/c/1477283 Commit-Queue: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Yang Guo <yangguo@chromium.org> Reviewed-by: Ali Ijaz Sheikh <ofrobots@google.com> Cr-Commit-Position: refs/heads/master@{#59752}
2019-02-20 09:02:06 +00:00
thread.Join();
i::V8::SetPlatformForTesting(old_platform);
}
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
#ifdef V8_USE_PERFETTO
using TraceEvent = ::perfetto::protos::ChromeTraceEvent;
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
class TestListener : public TraceEventListener {
public:
void ProcessPacket(const ::perfetto::protos::TracePacket& packet) {
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
for (const ::perfetto::protos::ChromeTraceEvent& event :
packet.chrome_events().trace_events()) {
events_.push_back(event);
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
}
}
TraceEvent* get_event(size_t index) { return &events_.at(index); }
size_t events_size() const { return events_.size(); }
private:
std::vector<TraceEvent> events_;
};
class TracingTestHarness {
public:
TracingTestHarness() {
old_platform_ = i::V8::GetCurrentPlatform();
default_platform_ = v8::platform::NewDefaultPlatform();
i::V8::SetPlatformForTesting(default_platform_.get());
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
auto tracing =
base::make_unique<v8::platform::tracing::TracingController>();
tracing_controller_ = tracing.get();
static_cast<v8::platform::DefaultPlatform*>(default_platform_.get())
->SetTracingController(std::move(tracing));
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
tracing_controller_->InitializeForPerfetto(&perfetto_json_stream_);
tracing_controller_->SetTraceEventListenerForTesting(&listener_);
}
~TracingTestHarness() { i::V8::SetPlatformForTesting(old_platform_); }
void StartTracing() {
TraceConfig* trace_config = new TraceConfig();
trace_config->AddIncludedCategory("v8");
tracing_controller_->StartTracing(trace_config);
}
void StopTracing() { tracing_controller_->StopTracing(); }
TraceEvent* get_event(size_t index) { return listener_.get_event(index); }
size_t events_size() const { return listener_.events_size(); }
std::string perfetto_json_stream() { return perfetto_json_stream_.str(); }
private:
std::unique_ptr<v8::Platform> default_platform_;
v8::Platform* old_platform_;
v8::platform::tracing::TracingController* tracing_controller_;
TestListener listener_;
std::ostringstream perfetto_json_stream_;
};
TEST(Perfetto) {
TracingTestHarness harness;
harness.StartTracing();
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
uint64_t uint64_arg = 1024;
const char* str_arg = "str_arg";
{
TRACE_EVENT0("v8", "test1");
TRACE_EVENT1("v8", "test2", "arg1", uint64_arg);
TRACE_EVENT2("v8", "test3", "arg1", uint64_arg, "arg2", str_arg);
}
TRACE_EVENT_INSTANT0("v8", "final event not captured",
TRACE_EVENT_SCOPE_THREAD);
harness.StopTracing();
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
TraceEvent* event = harness.get_event(0);
int32_t thread_id = event->thread_id();
int32_t process_id = event->process_id();
CHECK_EQ("test1", event->name());
CHECK_EQ(TRACE_EVENT_PHASE_BEGIN, event->phase());
int64_t timestamp = event->timestamp();
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
event = harness.get_event(1);
CHECK_EQ("test2", event->name());
CHECK_EQ(TRACE_EVENT_PHASE_BEGIN, event->phase());
CHECK_EQ(thread_id, event->thread_id());
CHECK_EQ(process_id, event->process_id());
CHECK_GE(event->timestamp(), timestamp);
timestamp = event->timestamp();
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
event = harness.get_event(2);
CHECK_EQ("test3", event->name());
CHECK_EQ(TRACE_EVENT_PHASE_BEGIN, event->phase());
CHECK_EQ(thread_id, event->thread_id());
CHECK_EQ(process_id, event->process_id());
CHECK_GE(event->timestamp(), timestamp);
timestamp = event->timestamp();
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
event = harness.get_event(3);
CHECK_EQ(TRACE_EVENT_PHASE_END, event->phase());
CHECK_EQ(thread_id, event->thread_id());
CHECK_EQ(process_id, event->process_id());
CHECK_GE(event->timestamp(), timestamp);
timestamp = event->timestamp();
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
event = harness.get_event(4);
CHECK_EQ(TRACE_EVENT_PHASE_END, event->phase());
CHECK_EQ(thread_id, event->thread_id());
CHECK_EQ(process_id, event->process_id());
CHECK_GE(event->timestamp(), timestamp);
timestamp = event->timestamp();
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
event = harness.get_event(5);
CHECK_EQ(TRACE_EVENT_PHASE_END, event->phase());
CHECK_EQ(thread_id, event->thread_id());
CHECK_EQ(process_id, event->process_id());
CHECK_GE(event->timestamp(), timestamp);
timestamp = event->timestamp();
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
CHECK_EQ(6, harness.events_size());
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
}
// Replacement for 'TestTracingController'
TEST(Categories) {
TracingTestHarness harness;
harness.StartTracing();
{
TRACE_EVENT0("v8", "v8.Test");
// cat category is not included in default config
TRACE_EVENT0("cat", "v8.Test2");
TRACE_EVENT0("v8", "v8.Test3");
}
TRACE_EVENT_INSTANT0("v8", "final event not captured",
TRACE_EVENT_SCOPE_THREAD);
harness.StopTracing();
CHECK_EQ(4, harness.events_size());
TraceEvent* event = harness.get_event(0);
CHECK_EQ("v8.Test", event->name());
event = harness.get_event(1);
CHECK_EQ("v8.Test3", event->name());
}
// Replacement for 'TestTracingControllerMultipleArgsAndCopy'
TEST(MultipleArgsAndCopy) {
uint64_t aa = 11;
unsigned int bb = 22;
uint16_t cc = 33;
unsigned char dd = 44;
int64_t ee = -55;
int ff = -66;
int16_t gg = -77;
signed char hh = -88;
bool ii1 = true;
bool ii2 = false;
double jj1 = 99.0;
double jj2 = 1e100;
double jj3 = std::numeric_limits<double>::quiet_NaN();
double jj4 = std::numeric_limits<double>::infinity();
double jj5 = -std::numeric_limits<double>::infinity();
void* kk = &aa;
const char* ll = "100";
std::string mm = "INIT";
std::string mmm = "\"INIT\"";
TracingTestHarness harness;
harness.StartTracing();
// Create a scope for the tracing controller to terminate the trace writer.
{
TRACE_EVENT1("v8", "v8.Test.aa", "aa", aa);
TRACE_EVENT1("v8", "v8.Test.bb", "bb", bb);
TRACE_EVENT1("v8", "v8.Test.cc", "cc", cc);
TRACE_EVENT1("v8", "v8.Test.dd", "dd", dd);
TRACE_EVENT1("v8", "v8.Test.ee", "ee", ee);
TRACE_EVENT1("v8", "v8.Test.ff", "ff", ff);
TRACE_EVENT1("v8", "v8.Test.gg", "gg", gg);
TRACE_EVENT1("v8", "v8.Test.hh", "hh", hh);
TRACE_EVENT1("v8", "v8.Test.ii", "ii1", ii1);
TRACE_EVENT1("v8", "v8.Test.ii", "ii2", ii2);
TRACE_EVENT1("v8", "v8.Test.jj1", "jj1", jj1);
TRACE_EVENT1("v8", "v8.Test.jj2", "jj2", jj2);
TRACE_EVENT1("v8", "v8.Test.jj3", "jj3", jj3);
TRACE_EVENT1("v8", "v8.Test.jj4", "jj4", jj4);
TRACE_EVENT1("v8", "v8.Test.jj5", "jj5", jj5);
TRACE_EVENT1("v8", "v8.Test.kk", "kk", kk);
TRACE_EVENT1("v8", "v8.Test.ll", "ll", ll);
TRACE_EVENT1("v8", "v8.Test.mm", "mm", TRACE_STR_COPY(mmm.c_str()));
TRACE_EVENT2("v8", "v8.Test2.1", "aa", aa, "ll", ll);
TRACE_EVENT2("v8", "v8.Test2.2", "mm1", TRACE_STR_COPY(mm.c_str()), "mm2",
TRACE_STR_COPY(mmm.c_str()));
// Check copies are correct.
TRACE_EVENT_COPY_INSTANT0("v8", mm.c_str(), TRACE_EVENT_SCOPE_THREAD);
TRACE_EVENT_COPY_INSTANT2("v8", mm.c_str(), TRACE_EVENT_SCOPE_THREAD, "mm1",
mm.c_str(), "mm2", mmm.c_str());
mm = "CHANGED";
mmm = "CHANGED";
TRACE_EVENT_INSTANT1("v8", "v8.Test", TRACE_EVENT_SCOPE_THREAD, "a1",
new ConvertableToTraceFormatMock(42));
std::unique_ptr<ConvertableToTraceFormatMock> trace_event_arg(
new ConvertableToTraceFormatMock(42));
TRACE_EVENT_INSTANT2("v8", "v8.Test", TRACE_EVENT_SCOPE_THREAD, "a1",
std::move(trace_event_arg), "a2",
new ConvertableToTraceFormatMock(123));
}
TRACE_EVENT_INSTANT0("v8", "final event not captured",
TRACE_EVENT_SCOPE_THREAD);
harness.StopTracing();
// 20 START/END events, 4 INSTANT events.
CHECK_EQ(44, harness.events_size());
TraceEvent* event = harness.get_event(0);
CHECK_EQ("aa", event->args()[0].name());
CHECK_EQ(aa, event->args()[0].uint_value());
event = harness.get_event(1);
CHECK_EQ("bb", event->args()[0].name());
CHECK_EQ(bb, event->args()[0].uint_value());
event = harness.get_event(2);
CHECK_EQ("cc", event->args()[0].name());
CHECK_EQ(cc, event->args()[0].uint_value());
event = harness.get_event(3);
CHECK_EQ("dd", event->args()[0].name());
CHECK_EQ(dd, event->args()[0].uint_value());
event = harness.get_event(4);
CHECK_EQ("ee", event->args()[0].name());
CHECK_EQ(ee, event->args()[0].int_value());
event = harness.get_event(5);
CHECK_EQ("ff", event->args()[0].name());
CHECK_EQ(ff, event->args()[0].int_value());
event = harness.get_event(6);
CHECK_EQ("gg", event->args()[0].name());
CHECK_EQ(gg, event->args()[0].int_value());
event = harness.get_event(7);
CHECK_EQ("hh", event->args()[0].name());
CHECK_EQ(hh, event->args()[0].int_value());
event = harness.get_event(8);
CHECK_EQ("ii1", event->args()[0].name());
CHECK_EQ(ii1, event->args()[0].bool_value());
event = harness.get_event(9);
CHECK_EQ("ii2", event->args()[0].name());
CHECK_EQ(ii2, event->args()[0].bool_value());
event = harness.get_event(10);
CHECK_EQ("jj1", event->args()[0].name());
CHECK_EQ(jj1, event->args()[0].double_value());
event = harness.get_event(11);
CHECK_EQ("jj2", event->args()[0].name());
CHECK_EQ(jj2, event->args()[0].double_value());
event = harness.get_event(12);
CHECK_EQ("jj3", event->args()[0].name());
CHECK(std::isnan(event->args()[0].double_value()));
event = harness.get_event(13);
CHECK_EQ("jj4", event->args()[0].name());
CHECK_EQ(jj4, event->args()[0].double_value());
event = harness.get_event(14);
CHECK_EQ("jj5", event->args()[0].name());
CHECK_EQ(jj5, event->args()[0].double_value());
event = harness.get_event(15);
CHECK_EQ("kk", event->args()[0].name());
CHECK_EQ(kk, reinterpret_cast<void*>(event->args()[0].pointer_value()));
event = harness.get_event(16);
CHECK_EQ("ll", event->args()[0].name());
CHECK_EQ(ll, event->args()[0].string_value());
event = harness.get_event(17);
CHECK_EQ("mm", event->args()[0].name());
CHECK_EQ("\"INIT\"", event->args()[0].string_value());
event = harness.get_event(18);
CHECK_EQ("v8.Test2.1", event->name());
CHECK_EQ("aa", event->args()[0].name());
CHECK_EQ(aa, event->args()[0].uint_value());
CHECK_EQ("ll", event->args()[1].name());
CHECK_EQ(ll, event->args()[1].string_value());
event = harness.get_event(19);
CHECK_EQ("mm1", event->args()[0].name());
CHECK_EQ("INIT", event->args()[0].string_value());
CHECK_EQ("mm2", event->args()[1].name());
CHECK_EQ("\"INIT\"", event->args()[1].string_value());
event = harness.get_event(20);
CHECK_EQ("INIT", event->name());
event = harness.get_event(21);
CHECK_EQ("INIT", event->name());
CHECK_EQ("mm1", event->args()[0].name());
CHECK_EQ("INIT", event->args()[0].string_value());
CHECK_EQ("mm2", event->args()[1].name());
CHECK_EQ("\"INIT\"", event->args()[1].string_value());
event = harness.get_event(22);
CHECK_EQ("a1", event->args()[0].name());
CHECK_EQ("[42,42]", event->args()[0].json_value());
event = harness.get_event(23);
CHECK_EQ("a1", event->args()[0].name());
CHECK_EQ("[42,42]", event->args()[0].json_value());
CHECK_EQ("a2", event->args()[1].name());
CHECK_EQ("[123,123]", event->args()[1].json_value());
}
TEST(JsonIntegrationTest) {
// Check that tricky values are rendered correctly in the JSON output.
double big_num = 1e100;
double nan_num = std::numeric_limits<double>::quiet_NaN();
double inf_num = std::numeric_limits<double>::infinity();
double neg_inf_num = -std::numeric_limits<double>::infinity();
TracingTestHarness harness;
harness.StartTracing();
{
TRACE_EVENT1("v8", "v8.Test.1", "1", big_num);
TRACE_EVENT1("v8", "v8.Test.2", "2", nan_num);
TRACE_EVENT1("v8", "v8.Test.3", "3", inf_num);
TRACE_EVENT1("v8", "v8.Test.4", "4", neg_inf_num);
}
TRACE_EVENT_INSTANT0("v8", "final event not captured",
TRACE_EVENT_SCOPE_THREAD);
harness.StopTracing();
std::string json = harness.perfetto_json_stream();
std::vector<std::string> all_args;
GetJSONStrings(&all_args, json, "\"args\"", "{", "}");
CHECK_EQ("\"1\":1e+100", all_args[0]);
CHECK_EQ("\"2\":\"NaN\"", all_args[1]);
CHECK_EQ("\"3\":\"Infinity\"", all_args[2]);
CHECK_EQ("\"4\":\"-Infinity\"", all_args[3]);
}
TEST(TracingPerfetto) {
::perfetto::TraceConfig perfetto_trace_config;
perfetto_trace_config.add_buffers()->set_size_kb(4096);
auto* ds_config = perfetto_trace_config.add_data_sources()->mutable_config();
ds_config->set_name("v8.trace_events");
perfetto::DataSourceDescriptor dsd;
dsd.set_name("v8.trace_events");
TestDataSource::Register(dsd);
auto tracing_session_ =
perfetto::Tracing::NewTrace(perfetto::BackendType::kInProcessBackend);
tracing_session_->Setup(perfetto_trace_config);
tracing_session_->Start();
TestDataSource::started_.Wait();
for (int i = 0; i < 15; i++) {
TestDataSource::Trace([&](TestDataSource::TraceContext ctx) {
auto packet = ctx.NewTracePacket();
auto* trace_event_bundle = packet->set_chrome_events();
auto* trace_event = trace_event_bundle->add_trace_events();
trace_event->set_phase('c');
trace_event->set_thread_id(v8::base::OS::GetCurrentThreadId());
trace_event->set_timestamp(123);
trace_event->set_process_id(v8::base::OS::GetCurrentProcessId());
trace_event->set_thread_timestamp(123);
});
}
v8::base::Semaphore stopped_{0};
tracing_session_->SetOnStopCallback([&stopped_]() { stopped_.Signal(); });
tracing_session_->Stop();
stopped_.Wait();
std::ostringstream perfetto_json_stream_;
{
v8::platform::tracing::JSONTraceEventListener json_listener_(
&perfetto_json_stream_);
std::vector<char> trace = tracing_session_->ReadTraceBlocking();
json_listener_.ParseFromArray(trace);
}
printf("%s\n", perfetto_json_stream_.str().c_str());
CHECK_GT(perfetto_json_stream_.str().length(), 0);
}
[tracing] Add a way to test perfetto traces. Add a new abstract class TraceEventListener which is just an interface for consuming trace events. This separates the V8-specific stuff that an actual perfetto consumer needs to do e.g. handling the has_more flag and signalling back to the controller with a semaphore. This is a change from the previous plan of making the PerfettoConsumer class sub-classable to implement custom consumption of trace events. This will be difficult when the consumer is created outside of the PerfettoTracingController as we can't hook up the consumer_finished_semaphore_ that belongs to the controller. Now the PerfettoTracingController is responsible for the Consumer life- cycle and hides it entirely from callers. We add the AddTraceEventListener() method to allow callers to register a listener either for testing or a JSON listener for real tracing. This lets us write tests that can store all the trace events in memory without first converting them to JSON, letting us write test more easily. There's an example test add to test-tracing - more tests using this style will follow. Cq-Include-Trybots: luci.v8.try:v8_linux64_perfetto_dbg_ng Bug: v8:8339 Change-Id: I2d2b0f408b1c7bed954144163e1968f40d772c1b Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1628789 Commit-Queue: Ulan Degenbaev <ulan@chromium.org> Auto-Submit: Peter Marshall <petermarshall@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#61854}
2019-05-27 12:46:35 +00:00
#endif // V8_USE_PERFETTO
} // namespace tracing
} // namespace platform
} // namespace v8