This enables Ignition unconditionally for all code that is destined for
optimization with TurboFan. This ensures all optimization attempts will
go through the BytecodeGraphBuilder and that the AstGraphBuilder pipe is
dried out in practice.
patch from issue 2427953002 at patchset 120001 (http://crrev.com/2427953002#ps120001)
R=mvstanton@chromium.org,rmcilroy@chromium.org
Review-Url: https://codereview.chromium.org/2453973004
Cr-Commit-Position: refs/heads/master@{#40663}
Conflicting type feedback on Load/StoreICs can lead to out-of-bounds
field access, which is essentially dead code, but EscapeAnalysis was
confused about those. For now, mark the objects as escaping in these
cases, middle-term we want to deal better with this kind of compile-
time known dead code.
BUG=chromium:658185,v8:4586
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2459273002
Cr-Commit-Position: refs/heads/master@{#40662}
These are added to the sampler stack trace when RCS are
enabled.
Resource name for a RCS frame is reported as "V8Runtime".
Counter names match ones from src/counters.h
BUG=chromium:660428
Review-Url: https://codereview.chromium.org/2461003002
Cr-Commit-Position: refs/heads/master@{#40658}
The majority of context slot accesses are to the local context (current context
register and depth 0), so this adds bytecodes to optimise for that case.
This cuts down bytecode size by roughly 1% (measured on Octane and Top25).
Review-Url: https://codereview.chromium.org/2459513002
Cr-Commit-Position: refs/heads/master@{#40641}
This flag is on by default for now. Whenever heuristics in the compiler
pipeline decide to use Ignition+TurboFan, then {BytecodeGraphBuilder} is
active. Removing the flag reduces maintenance overhead.
R=mvstanton@chromium.org
Review-Url: https://codereview.chromium.org/2437103002
Cr-Commit-Position: refs/heads/master@{#40639}
This CL adds simple implementation of break and stepping-related functionality
as required by the debug-step.js test. This includes
* stepOver, stepInto, stepOut
* setBreakPoint
* clearBreakPoint
* evaluate
Some of these, e.g. setBreakPoint are not fully implemented for all cases but
only for the ones we need right now.
One interesting result of this is that using the inspector protocol is roughly
14x slower for debug-step.js (14s instead of 0.5s). One cause of this seems to
be iteration over all object properties in toProtocolValue, which is used to
serialize JS objects before being sent over the wire (e.g. FrameMirrors). This
is something that should be fixed at some point. In the meantime, the test now
runs 100 instead of 1000 iterations.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2447073007
Cr-Commit-Position: refs/heads/master@{#40636}
This adds a wrapper class around the inspector protocol for use in
debugger tests. The interface is intended to stay similar to the
currently exposed DebuggerContext.
Right now, we support adding a listener, (partial) handling of the
AfterCompile event, and enabling/disabling the debugger.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2451153003
Cr-Commit-Position: refs/heads/master@{#40635}
In the asm.js to wasm pipeline, we generate an entry function with
BUILTIN code, but still attached to a TYPE_NORMAL script.
This fix avoids trying to set a breakpoint there, resulting in a crash
on DCHECK(shared->HasDebugInfo()).
Also add two inspector tests to track regressions.
BUG=v8:5568
R=titzer@chromium.org,mstarzinger@chromium.org
Review-Url: https://codereview.chromium.org/2457433002
Cr-Commit-Position: refs/heads/master@{#40633}
The reasons are:
1) Type feedback vectors are not shared between different native contexts and
therefore the IC handler created for one native context will not be reused
in other native context.
2) Access rights revocation is not supported at all, therefore given (1) once
we pass the access check we don't have to check access rights again.
BUG=v8:5561
Review-Url: https://codereview.chromium.org/2455953002
Cr-Commit-Position: refs/heads/master@{#40627}
The assumptions that OSR code is installed on {JSFunction} objects no
longer holds with TurboFan and hence {assertOptimized} can report a
different result dependeing on how OSR code is treated. This is working
as intended.
R=mythria@chromium.org
Review-Url: https://codereview.chromium.org/2453313002
Cr-Commit-Position: refs/heads/master@{#40624}
This prepares the code-base so that Ignition can be enabled on a certain
subset of compilations without setting the {FLAG_ignition} flag (which
enables Ignition on all compilations). We should not check the flag in
question explicitly anywhere outside of the compiler heuristics.
R=mvstanton@chromium.org
Review-Url: https://codereview.chromium.org/2443573002
Cr-Commit-Position: refs/heads/master@{#40617}
We used to point elsewhere, for instance the right-hand-side of an assignment.
Small limitation: Since variable proxies only have a start position, not an end
position, the best we can do is point at the first character. (We cannot rely
on the scanner's last token position because Declare may be called long after
the variable has been scanned.)
R=adamk@chromium.org
BUG=v8:5572
Review-Url: https://codereview.chromium.org/2447143005
Cr-Commit-Position: refs/heads/master@{#40613}
This is a new bytecode which behaves (for now) exactly like Call,
except that in turbofan graph building we can set the
ConvertReceiverMode to NotNullOrUndefined.
I observe a 1% improvement on Box2D, I'd expect a similar improvement on
other OOP heavy code.
Review-Url: https://codereview.chromium.org/2450243002
Cr-Commit-Position: refs/heads/master@{#40610}
For inputs to truncating binary operations like <<, | or >>>, support
all Oddballs not just undefined, true and false. This unifies treatment
of these truncations in Crankshaft and TurboFan, and is very easy
nowadays, since the memory layout of Oddball and HeapNumber is
compatible.
R=yangguo@chromium.org
BUG=v8:5400
Review-Url: https://codereview.chromium.org/2452193003
Cr-Commit-Position: refs/heads/master@{#40608}
Since ZoneLists are essentially non-standard ZoneVectors and have a bad
growing behaviour (ZoneList-allocations make up ~50% of website parse
zone memory) we should stop using them. The zone-containers are merely
a clean-up, with none of them actually better suited to be used with
zones. This new datastructure allows most operations of a LinkedList (
except pop_first and insertAt/removeAt) but uses about the same memory
as a well-initialized ZoneVector/ZoneList (<3% overhead with reasonably
large lists). It also never attempts to free memory again (which would
not work in zones anyway).
The ZoneChunkList is essentially a doubly-linked-list of arrays of
variable size.
Some test-results where I tried storing 16k pointers in different list
types (lists themselves also zone-allocated):
List type Zone memory used Time taken
-----------------------------------------------------------------------
Zone array (for comparison) 131072 B
Ideally initialized ZoneList 131088 B 0.062ms
ChunkZoneList 134744 B 0.052ms <--new thing
ZoneDeque 141744 B
ZoneLinkedList 393264 B
Initially empty ZoneList 524168 B 0.171ms <--right now
ChunkZoneList only push_front 524320 B
Review-Url: https://codereview.chromium.org/2449383002
Cr-Commit-Position: refs/heads/master@{#40602}
- Modifies RegisterConfiguration to specify complex aliasing on ARM 32.
- Modifies RegisterAllocator to consider aliasing.
- Modifies ParallelMove::PrepareInsertAfter to handle aliasing.
- Modifies GapResolver to split wider register moves when interference
with smaller moves is detected.
- Modifies MoveOptimizer to handle aliasing.
- Adds ARM 32 macro-assembler pseudo move instructions to handle cases where
split moves don't correspond to actual s-registers.
- Modifies CodeGenerator::AssembleMove and AssembleSwap to handle moves of
different widths, and moves involving pseudo-s-registers.
- Adds unit tests for FP operand interference checking and PrepareInsertAfter.
- Adds more tests of FP for the move optimizer and register allocator.
LOG=N
BUG=v8:4124
Review-Url: https://codereview.chromium.org/2410673002
Cr-Commit-Position: refs/heads/master@{#40597}
For instance, when an import cannot be resolved, actually
point at the corresponding import statement.
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2451153002
Cr-Commit-Position: refs/heads/master@{#40594}
For global object property cells, we did not check that the map on the
previous object is still the same for which we actually optimized. So
the optimized code was not in sync with the actual state of the property
cell. When loading from such a global object property cell, Crankshaft
optimizes away any map checks (based on the stable map assumption),
leading to arbitrary memory access in the worst case.
TurboFan has the same bug for stores, but is safe on loads because we
do appropriate map checks there. However mixing TurboFan and Crankshaft
still exposes the bug.
R=yangguo@chromium.org
BUG=chromium:659475
Review-Url: https://codereview.chromium.org/2444233004
Cr-Commit-Position: refs/heads/master@{#40592}
The TurboFan backends currently don't support tail-calls to CPP builtins
because the semantics of kJavaScriptCallArgCountRegister has different
semantics for stub call descriptors versus JavaScript call descriptors.
This is actually a short-coming of the backends and follow-up work will
make the backends more robust in that regard to fail hard on unsupported
constructs like that. This just disables the lowering creating such a
tail-call.
R=bmeurer@chromium.org
BUG=chromium:658691
TEST=mjsunit/regress/regress-crbug-658691
Review-Url: https://codereview.chromium.org/2447383002
Cr-Commit-Position: refs/heads/master@{#40590}
Reason for revert:
Breaks tree: http://build.chromium.org/p/client.v8/builders/V8%20Linux64%20GC%20Stress%20-%20custom%20snapshot/builds/8789
Original issue's description:
> [compiler] Properly validate stable map assumption for globals.
>
> For global object property cells, we did not check that the map on the
> previous object is still the same for which we actually optimized. So
> the optimized code was not in sync with the actual state of the property
> cell. When loading from such a global object property cell, Crankshaft
> optimizes away any map checks (based on the stable map assumption),
> leading to arbitrary memory access in the worst case.
>
> TurboFan has the same bug for stores, but is safe on loads because we
> do appropriate map checks there. However mixing TurboFan and Crankshaft
> still exposes the bug.
>
> R=yangguo@chromium.org
> BUG=chromium:659475
TBR=yangguo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:659475
Review-Url: https://codereview.chromium.org/2454513003
Cr-Commit-Position: refs/heads/master@{#40582}
Native setters (see AccessorInfo in accessors.h) didn't have the ability
to return a result value. As a consequence of this, for instance, Reflect.set
on the length property of arrays had the wrong behavior:
var y = [];
Object.defineProperty(y, 0, {value: 42, configurable: false})
Reflect.set(y, 'length', 0)
The Reflect.set call used to return true. Now it returns false as
required by the spec.
BUG=v8:5401
Review-Url: https://codereview.chromium.org/2397603003
Cr-Commit-Position: refs/heads/master@{#40579}
For global object property cells, we did not check that the map on the
previous object is still the same for which we actually optimized. So
the optimized code was not in sync with the actual state of the property
cell. When loading from such a global object property cell, Crankshaft
optimizes away any map checks (based on the stable map assumption),
leading to arbitrary memory access in the worst case.
TurboFan has the same bug for stores, but is safe on loads because we
do appropriate map checks there. However mixing TurboFan and Crankshaft
still exposes the bug.
R=yangguo@chromium.org
BUG=chromium:659475
Review-Url: https://codereview.chromium.org/2444233004
Cr-Commit-Position: refs/heads/master@{#40578}
Fix failing assertions in the CodeStubAssembler that cause Object.create(null,
global) fail.
Drive-by-fix: convert some Assert to CSA_ASSERT.
BUG=chromium:657692
Review-Url: https://codereview.chromium.org/2446203003
Cr-Commit-Position: refs/heads/master@{#40576}
This brings the BytecodeGenerator in line with FullCodeGenerator, now that
more requests for hole checks are flowing through BuildVariableAssignment.
BUG=chromium:658528
Review-Url: https://codereview.chromium.org/2447783002
Cr-Commit-Position: refs/heads/master@{#40557}
Object.create(null) is most likely to be used for dictionary-like objects.
Hence it would be beneficial to directly create a slow-mode object and avoid
additional overhead later-on.
BUG=
Review-Url: https://codereview.chromium.org/2430273007
Cr-Commit-Position: refs/heads/master@{#40551}
This CL removes code that is now unused since the port of regexp.js has been
completed. Removed functions / classes are:
* regexp.js (GetSubstitution moved to string.js)
* RegExpConstructResult stub
* RegExpFlags intrinsic
* RegExpSource intrinsic
* RegExpInitializeAndCompile runtime function
BUG=v8:5339
Review-Url: https://codereview.chromium.org/2448463002
Cr-Commit-Position: refs/heads/master@{#40547}
To achieve this:
- fixed crash on windows - String16::fromInteger used "%zu" which doesn't support by VS2013 compiler, wrapped with ifdef else.
- fixed asan for d8 - unique_ptr on array has single element type.
- force Debugger.disable at the end of test.
BUG=chromium:635948
R=dgozman@chromium.org,yangguo@chromium.org,machenbach@chromium.org
Review-Url: https://codereview.chromium.org/2450653002
Cr-Commit-Position: refs/heads/master@{#40546}
Modify the Bytecode Register Optimizer to be an independent component
rather than part of the BytecodePipeline. This means the BytecodeArrayBuilder
can explicitly call it with register operands when outputting a bytecode
and the Bytecode Register Optimizer doesn't need to work out which operands
are register operands. This also means we don't need to build BytecodeNodes
for Ldar / Star / Mov bytecodes unless they are actually emitted by the
optimizer.
This change also modifies the way the BytecodeArrayBuilder converts
operands to make use of the OperandTypes specified in bytecodes.h.
This avoids having to individually convert operands to their raw output
value before calling Output(...).
BUG=v8:4280
Review-Url: https://codereview.chromium.org/2393683004
Cr-Commit-Position: refs/heads/master@{#40543}
Now we
- always set .result to undefined before a visited loop and switch since we can't know whether they will set a value,
- only visit finally if it can break/continue; and only store/restore .result in that case
BUG=
Review-Url: https://codereview.chromium.org/2427253003
Cr-Commit-Position: refs/heads/master@{#40542}
CL https://codereview.chromium.org/2177273002 changed FastNewFunctionContextStub
to take a number of slots parameter and in-doing so removed the maximum slot
count for FastNewFunctionContextStub. This made it possible to create a
closure which is larger than kMaxRegularHeapObjectSize and so can't be
allocated by FastNewFunctionContextStub.
Reintroduce FastNewFunctionContextStub::kMaxSlots (but make the limit much
larger) to ensure we call the runtime for contexts which need to be
allocated in the LO space.
BUG=chromium:655573
Review-Url: https://codereview.chromium.org/2445703002
Cr-Commit-Position: refs/heads/master@{#40541}
Reason for revert:
Causes regressions: https://bugs.chromium.org/p/chromium/issues/detail?id=658711
Original issue's description:
> [compiler] Prepare for partially shipping Ignition.
>
> This prepares the code-base so that Ignition can be enabled on a certain
> subset of compilations without setting the {FLAG_ignition} flag (which
> enables Ignition on all compilations). We should not check the flag in
> question explicitly anywhere outside of the compiler heuristics.
>
> R=mvstanton@chromium.org
BUG=chromium:658711
TBR=mvstanton@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
Review-Url: https://codereview.chromium.org/2448443002
Cr-Commit-Position: refs/heads/master@{#40534}
This results in a speedup of around 2x. RegExpExec is also ported in
this CL.
BUG=v8:5339
Review-Url: https://codereview.chromium.org/2441993002
Cr-Commit-Position: refs/heads/master@{#40532}
Depending on the inputs the fuzzer creates multiple functions. These
functions can have signatures with an int32 return value and up to three
parameters of type int32, int64, float32, or float64.
R=titzer@chromium.org, clemensh@chromium.org
Review-Url: https://codereview.chromium.org/2447643002
Cr-Commit-Position: refs/heads/master@{#40530}
The test ensures that in RegExp.prototype[@@split], exec is neither
accessed too early nor too often.
BUG=v8:5339,v8:5434
Review-Url: https://codereview.chromium.org/2440413002
Cr-Commit-Position: refs/heads/master@{#40526}
We need to check the KeyedLoadIC state to guard against potential
deoptimization loops due to out-of-bounds accesses, because the IC
system uses the MEGAMORPHIC state to also signal that there was an
out-of-bounds access already.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2443893002
Cr-Commit-Position: refs/heads/master@{#40525}
This patch moves management of marking deque backing store into the
MarkingDeque class, which will simplify unmapping of backing store in
concurrent task.
BUG=
Review-Url: https://codereview.chromium.org/2439063002
Cr-Commit-Position: refs/heads/master@{#40523}
When lowering JSToLength, we cannot just smash arbitrary bounds on the
Select nodes, as that will confuse the representation selection later.
Instead properly rename the input using NumberMax and NumberMin.
R=jarin@chromium.org
BUG=chromium:657478
Review-Url: https://codereview.chromium.org/2440333002
Cr-Commit-Position: refs/heads/master@{#40519}
Since the public API for deserialization is now just DeserializeOrCompile,
we can trickle down the wire bytes to the deserialization logic, and
avoid the need for duplicating the wire bytes when serializing.
BUG=chromium:657316
Review-Url: https://chromiumcodereview.appspot.com/2433273002
Cr-Commit-Position: refs/heads/master@{#40516}
This prepares the code-base so that Ignition can be enabled on a certain
subset of compilations without setting the {FLAG_ignition} flag (which
enables Ignition on all compilations). We should not check the flag in
question explicitly anywhere outside of the compiler heuristics.
R=mvstanton@chromium.org
Review-Url: https://chromiumcodereview.appspot.com/2443573002
Cr-Commit-Position: refs/heads/master@{#40507}
These map checks were implemented for TF code already. This CL makes
sure that parts implemented in C++ follow the same logic, which is:
An object is an unmodified regexp if:
1) it's a receiver,
2) its map is the initial regexp map,
3) its prototype is a receiver,
4) and its prototype's map is the initial prototype's initial map.
We can now be smarter in @@replace and @@split since checking maps
(unlike the previous check of RegExp.prototype.exec) is not observable,
so we can perform fast-path checks at a time of our choosing.
BUG=v8:5339,v8:5434,v8:5123
Review-Url: https://chromiumcodereview.appspot.com/2434983002
Cr-Commit-Position: refs/heads/master@{#40501}
Reason for revert:
https://build.chromium.org/p/client.v8.fyi/builders/V8-Blink%20Linux%2064/builds/10853
Original issue's description:
> [regexp] Use consistent map checks for fast paths
>
> These map checks were implemented for TF code already. This CL makes
> sure that parts implemented in C++ follow the same logic, which is:
>
> An object is an unmodified regexp if:
> 1) it's a receiver,
> 2) its map is the initial regexp map,
> 3) its prototype is a receiver,
> 4) and its prototype's map is the initial prototype's initial map.
>
> We can now be smarter in @@replace and @@split since checking maps
> (unlike the previous check of RegExp.prototype.exec) is not observable,
> so we can perform fast-path checks at a time of our choosing.
>
> BUG=v8:5339,v8:5434,v8:5123
TBR=yangguo@chromium.org,jgruber@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5339,v8:5434,v8:5123
Review-Url: https://chromiumcodereview.appspot.com/2438283002
Cr-Commit-Position: refs/heads/master@{#40499}
These map checks were implemented for TF code already. This CL makes
sure that parts implemented in C++ follow the same logic, which is:
An object is an unmodified regexp if:
1) it's a receiver,
2) its map is the initial regexp map,
3) its prototype is a receiver,
4) and its prototype's map is the initial prototype's initial map.
We can now be smarter in @@replace and @@split since checking maps
(unlike the previous check of RegExp.prototype.exec) is not observable,
so we can perform fast-path checks at a time of our choosing.
BUG=v8:5339,v8:5434,v8:5123
Review-Url: https://chromiumcodereview.appspot.com/2434983002
Cr-Commit-Position: refs/heads/master@{#40495}
Additionally, remove all code related to the old-style slots filtering and black area end markers.
BUG=chromium:648568
Review-Url: https://chromiumcodereview.appspot.com/2440683002
Cr-Commit-Position: refs/heads/master@{#40494}
When the instance has imported memory, calling GrowMemory should update the memory object to have a consistent view of the memory. This fixes the failing emscripten test case, added a reduced test that simulates the same behavior.
R=titzer@chromium.org, dschuff@chromium.org
Review-Url: https://chromiumcodereview.appspot.com/2438673006
Cr-Commit-Position: refs/heads/master@{#40490}
Reason for revert:
https://build.chromium.org/p/client.v8.ports/builders/V8%20Android%20Arm64%20-%20builder/builds/4851
Original issue's description:
> Update implementation of atomics with latest Chromium version but use compiler builtin atomics
>
> Ideally, we would use the standard library. However, when we are compiling against an older version of the standard library the atomic implementation may be slow.
>
> BUG=
TBR=mlippautz@chromium.org,ulan@chromium.org,jarin@chromium.org,hpayer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review-Url: https://chromiumcodereview.appspot.com/2438983002
Cr-Commit-Position: refs/heads/master@{#40489}
Ideally, we would use the standard library. However, when we are compiling against an older version of the standard library the atomic implementation may be slow.
BUG=
Review-Url: https://chromiumcodereview.appspot.com/2425963002
Cr-Commit-Position: refs/heads/master@{#40488}
Move hole check logic from full-codegen into scope analysis, and store the
"needs hole check" bit on VariableProxy. This makes it easy to re-use in
any backend: it will be trivial to extend the use of this logic in, e.g.,
full-codegen variable stores.
While changing the signatures of the variable loading/storing methods in
Ignition, I took the liberty of replacing the verb "Visit" with "Build", since these
are not part of AST visiting.
BUG=v8:5460
Review-Url: https://chromiumcodereview.appspot.com/2411873004
Cr-Commit-Position: refs/heads/master@{#40479}
Added a size constraint to the configuration to limit the segment pool.
This will likely fix the memory alerts from small android devices.
BUG=chromium:655129
Review-Url: https://chromiumcodereview.appspot.com/2424393002
Cr-Commit-Position: refs/heads/master@{#40476}
The wasm specification does not fully specify the binary representation
of NaN: the sign bit can be non-deterministic. The wasm-code fuzzer
found a test case where the wasm interpreter and the compiled code
produce a different sign bit for a NaN, and as a consequence they
produce different results.
With this CL the interpreter tracks whether it executed an instruction
which can produce a NaN, which are div and sqrt instructions. The
fuzzer uses this information and compares the result of the interpreter
with the result of the compiled code only if there was no instruction
which could have produced a NaN.
R=titzer@chromium.org
TEST=cctest/test-run-wasm-interpreter/TestMayProduceNaN
BUG=chromium:657481
Review-Url: https://chromiumcodereview.appspot.com/2438603003
Cr-Commit-Position: refs/heads/master@{#40474}
This CL also introduces IsSetWord<T>(..) and IsSetWord32<T>(..) operations
to ease checking if the bit field is set or not.
BUG=
Review-Url: https://chromiumcodereview.appspot.com/2436893003
Cr-Commit-Position: refs/heads/master@{#40466}
This enables Ignition unconditionally for all code that is destined for
optimization with TurboFan. This ensures all optimization attempts will
go through the BytecodeGraphBuilder and that the AstGraphBuilder pipe is
dried out in practice.
R=mvstanton@chromium.org
Review-Url: https://chromiumcodereview.appspot.com/2427953002
Cr-Commit-Position: refs/heads/master@{#40462}
Currently it is possible to get into a cycle of
mark-compact -> memory reducer -> mark-compact -> memory reducer ...
where the memory reducer does not free memory.
This patch ensures that the memory reducer restarts only if the
committed memory increased by sufficient amount after the last run.
BUG=
Review-Url: https://chromiumcodereview.appspot.com/2433933005
Cr-Commit-Position: refs/heads/master@{#40457}
This CL refactors the handling of metadata associated with WebAssembly
modules to reduce the duplicate marshalling of data from the C++ world
to the JavaScript world. It does this by wrapping the C++ WasmModule*
object in a Foreign that is rooted from the on-heap WasmCompiledModule
(which is itself just a FixedArray). Upon serialization, the C++ object
is ignored and the original WASM wire bytes are serialized. Upon
deserialization, the C++ object is reconstituted by reparsing the bytes.
This is motivated by increasing complications in implementing the JS
API, in particular WebAssembly.Table, which must perform signature
canonicalization across instances.
Additionally, this CL implements the proper base + offset initialization
behavior for tables.
R=rossberg@chromium.org,bradnelson@chromium.org,mtrofin@chromium.org,yangguo@chromium.org
BUG=v8:5507, chromium:575167, chromium:657316
Review-Url: https://chromiumcodereview.appspot.com/2424623002
Cr-Commit-Position: refs/heads/master@{#40434}
Using uint32 to store the the number of control outputs allows WebAssembly switches to have more than 2^16 case.
BUG=v8:5531
TEST=mjsunit/regress/wasm/regression-5531
R=titzer@chromium.org
Review-Url: https://chromiumcodereview.appspot.com/2425983002
Cr-Commit-Position: refs/heads/master@{#40420}
* introduced v8::DebugInterface::ChangeBreakOnException(Isolate*,ExceptionBreakState);
* migrated inspector to new API;
* added cctest for new API;
* added inspector test for setPauseOnExceptionState.
BUG=chromium:652939,v8:5510
R=dgozman@chromium.org,yangguo@chromium.org
Review-Url: https://chromiumcodereview.appspot.com/2396193002
Cr-Commit-Position: refs/heads/master@{#40413}
BranchIf and helpers were introduced when exporting the schedule from the RawMachineAssembler was not ensuring that the CFG was well-form. These methods, that were used to introduce blocks to ensure edge-split form, are now unnecessary.
BUG=
Review-Url: https://codereview.chromium.org/2426923002
Cr-Commit-Position: refs/heads/master@{#40402}
MIPS64 doesn't support Word32 compare instructions. Instead it relies
that the values in registers are correctly sign-extended and uses
Word64 comparison instead. This behavior is correct in most cases,
but doesn't work when comparing signed with unsigned operands.
The solution proposed here tries to match a comparison of signed
with unsigned operand, and perform Word32Compare simulation only
in those cases. Unfortunately, the solution is not complete because
it might skip cases where Word32 compare simulation is needed, so
basically it is a hack.
BUG=
TEST=mjsunit/compiler/uint32
Review-Url: https://codereview.chromium.org/2391393003
Cr-Commit-Position: refs/heads/master@{#40398}
Consistently collect CallIC feedback in fullcodegen and Ignition, even
for possibly direct eval calls, that were treated specially so far, for
no apparent reason. With the upcoming SharedFunctionInfo based CallIC
feedback, we might be able to even inline certain direct eval calls, if
they manage to hit the eval cache. More importantly, this patch
simplifies the collection and dealing with CallIC feedback (and as a
side effect fixes an inconsistency with feedback for super constructor
calls).
R=mvstanton@chromium.org, mythria@chromium.org
BUG=v8:2206,v8:4280,v8:5267
Review-Url: https://codereview.chromium.org/2426693002
Cr-Commit-Position: refs/heads/master@{#40397}
When inlining JSCallConstruct in turbofan, receiver is initialized to model
the behaviour of constructor. When an implicit receiver is not required the
receiver value should be set to the hole value instead of undefined value.
When initializing the receiver via super calls, we check that the receiver
is the hole value.
BUG=chromium:653407
Review-Url: https://codereview.chromium.org/2424123002
Cr-Commit-Position: refs/heads/master@{#40396}
The inlined version of Array.prototype.push returned the value that was
pushed instead of the new "length" property value.
R=jarin@chromium.org
BUG=chromium:656037
Review-Url: https://codereview.chromium.org/2425903002
Cr-Commit-Position: refs/heads/master@{#40384}
EffectPhis can cause a cycle in a TurboFan graph. We delay the
processing of EffectPhis in the Int64Lowering to break these cycles. We
do the same already for Phis.
R=titzer@chromium.org
BUG=v8:5518
TEST=unittests/Int64LoweringTest.EffectPhiLoop
Review-Url: https://codereview.chromium.org/2428583002
Cr-Commit-Position: refs/heads/master@{#40378}
Implements the variations of CreateArrayIterator() in TFJ builtins
(ArrayPrototypeValues, ArrayPrototypeEntries and ArrayPrototypeKeys), and
provides two new Object types with numerous maps which identify certain
behaviours, which will be useful for inlining.
Removes src/js/array-iterator.js entirely
Also adds support for printing Symbol literals inserted by the Parser during
desugaring when FLAG_print_builtin_ast is set to true.
BUG=v8:5388
R=bmeurer@chromium.org, cbruni@chromium.orgTBR=ulan@chromium.org
Review-Url: https://codereview.chromium.org/2405253006
Cr-Commit-Position: refs/heads/master@{#40373}
This adds more useful information to the v8-heap-stats tool.
BUG=v8:5489
Review-Url: https://codereview.chromium.org/2394213003
Cr-Commit-Position: refs/heads/master@{#40361}
Adds a boolean flag to the liveness analysis which makes it also analyze
the accumulator. This can help prevent the accumulator escaping loops,
as well as decreasing the number of distinct state values nodes in the
graph.
The flag is a kind of ugly way to hack this in, however it is probably
the simplest to add, and (more importantly) to remove once the AST graph
builder is gone.
I measure a 2.6% improvement on Mandreel on my x64 machine, and a ~2%
improvement on Navier-Stokes. Other improvements are expected.
Review-Url: https://codereview.chromium.org/2428503002
Cr-Commit-Position: refs/heads/master@{#40359}
1) assertInstanceOf(o, Foo, Bar) used to produce this error message:
Failure: expected <o> is not an instance of <Foo> but of < Bar>> found <undefined>
Fixed:
Failure: <o> is not an instance of <Foo> but of <Bar>
2) assertDoesNotThrow("throw 1") used to produce this error message:
Failure: expected <threw an exception: > found <1>
Fixed:
Failure: threw an exception: 1
3) assertDoesNotThrow("...", SomeError) was not doing what you'd
think it does, so removed the last parameter.
BUG=
Review-Url: https://codereview.chromium.org/2424743003
Cr-Commit-Position: refs/heads/master@{#40347}
Use sparingly!
This doesn't add any really new functionality, other than making it more
convenient to do this.
This will primarily be used to wrap a WasmModule to be referenced from a
JSObject that represents an instance. There is one WasmModule C++ object
per parsed WasmModule, so this should not be more than a handful or a few
dozen in well-behaved programs.
R=rossberg@chromium.org,mlippautz@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/2409173005
Cr-Commit-Position: refs/heads/master@{#40346}
This makes optimization of all class constructors (i.e. both base and
derived) go through TurboFan. Note some class constructors containing
Harmony language features (e.g. super constructor calls or accesses to
the new.target value) were already going through TurboFan before.
R=bmeurer@chromium.org
BUG=v8:5458
Review-Url: https://codereview.chromium.org/2397723002
Cr-Commit-Position: refs/heads/master@{#40342}
In order to optimize super constructor calls with ES6 classes, we need
some feedback for both the JSCallConstruct and the resulting JSCreate
nodes in TurboFan. Both already optimize perfectly when the see nodes
with JSFunction constants, so utilizing the existing CallIC machinery
here, enables us to optimize the super constructor calls right now w/o
a lot of effort.
Note that there are probably better ways to track this information,
for example we could do some tracking on the constructor functions;
this will however require serious changes in TurboFan and the runtime,
and would block progress on more important tasks.
R=mythria@chromium.org
BUG=v8:5517
Review-Url: https://codereview.chromium.org/2419423002
Cr-Commit-Position: refs/heads/master@{#40337}
There are a couple of operators that can indeed produce Float32
representation, which we might end up using in a TaggedSigned
context, so add the missing conversion (indirectly via Float64).
BUG=chromium:656275
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2421193002
Cr-Commit-Position: refs/heads/master@{#40334}
Reason for revert:
This is probably not working for falsey values. I cannot JavaScript :P
Original issue's description:
> mjsunit: Fix the error message produced by assertInstanceof.
>
> Used to be:
>
> Failure: expected <foo> is not an instance of <Bar> but of < Baz>> found <undefined>
>
> Should be:
>
> Failure: <foo> is not an instance of <Bar> but of <Baz>
>
> BUG=
>
> Committed: https://crrev.com/2a480eff395756f36eb0ae2fc0a573454b394268
> Cr-Commit-Position: refs/heads/master@{#40319}
TBR=verwaest@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review-Url: https://codereview.chromium.org/2421033003
Cr-Commit-Position: refs/heads/master@{#40331}
If the catch prediction machinery in the middle of some async op, we
shouldn't send invalid events to the debugger.
Instead of sending events with an undefined id, we don't send them at
all.
Review-Url: https://codereview.chromium.org/2417093003
Cr-Commit-Position: refs/heads/master@{#40327}
A test where the deserialization data has a header, but the
header is invalid. This is in addition to the current test
where we have empty deserialization data.
BUG=
Review-Url: https://codereview.chromium.org/2418483002
Cr-Commit-Position: refs/heads/master@{#40321}
This allows people writing code stubs to just verify the graph of the stub they're working on, at least until we fix all of the issues we have and enable the verification by default.
Also fixes representations in CodeStubAssembler::SmiOr and InterpreterAssembler::StarDispatchLookahead.
R=bmeurer@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/2413653006
Cr-Commit-Position: refs/heads/master@{#40320}
Used to be:
Failure: expected <foo> is not an instance of <Bar> but of < Baz>> found <undefined>
Should be:
Failure: <foo> is not an instance of <Bar> but of <Baz>
BUG=
Review-Url: https://codereview.chromium.org/2413153004
Cr-Commit-Position: refs/heads/master@{#40319}
It doesn't need to have this logic.
ParseLazyFunctionLiteralBody is basically just ParseStatementList
+ log the function position. But PreParser doesn't need to have
the "which functions to log" logic, since logging the function is
always done exactly when Parser falls back to PreParser. (See
PreParseLazyFunction.)
So in the current state, PreParser would log several functions in
a SingletonLogger, and only the last one would take
effect (that's the one Parser also logs in SkipLazyFunctionBody).
Also updated test-parsing/Regress928 to produce the preparse data
the way we do now (i.e., not running the PreParser directly, but
running the Parser).
Error reporting: when PreParser finds an error, it doesn't need
to ReportUnexpectedToken in PreParseLazyFunction, since it
already has reported the error whenever it found it.
BUG=v8:5515
Review-Url: https://codereview.chromium.org/2421833002
Cr-Commit-Position: refs/heads/master@{#40315}
Now that all accesses to the last match info are in C++ and TF code, we can
finally turn the last match info into a FixedArray. Similar to the ArrayList,
it uses its first field to store its length and grows dynamically in amortized
O(1) time.
Unlike previously, this means that the last match info pointer stored on the
context can actually change (in case the FixedArray needs to grow).
BUG=v8:5339
Review-Url: https://codereview.chromium.org/2415103002
Cr-Commit-Position: refs/heads/master@{#40308}
When the test is executed in user mode qemu for mips64, it fails because
the buffer is too small. Increasing the buffer fixes the problem.
BUG=
TEST=cctest/test-mark-compact/RegressJoinThreadsOnIsolateDeinit
Review-Url: https://codereview.chromium.org/2416573002
Cr-Commit-Position: refs/heads/master@{#40278}
This ports RegExpInitialize, IsRegExp, InternalMatch and InternalReplace to C++
/ TurboFan. InternalMatch is in TurboFan because it calls RegExpExecStub and
needs to construct a RegExpResult (which are, respectively, a PlatformStub and
a CodeStubAssembler function).
Except for LastMatchInfo (and GetSubstitution, which could be moved to string.js
anytime), regexp.js is now completely empty.
BUG=v8:5339
Review-Url: https://codereview.chromium.org/2409513003
Cr-Commit-Position: refs/heads/master@{#40277}
A decoder error sets builder_ to null, which causes builder_->StackCheck
to segfault.
R=titzer@chromium.org
TEST=mjsunit/regress/wasm/loop-stack-check
Review-Url: https://codereview.chromium.org/2416873002
Cr-Commit-Position: refs/heads/master@{#40271}
This CL fixes the debugger interface to provide correct (high-level)
information for asm.js frames.
It moves the computation of the source position from the FrameInspector
to the individual StackFrame implementations, such that we can easily
specualize it for certain frame types, and can potentially reuse this
in other locations.
Also, we are finalizing the setup of the wasm module earlier, before
executing the start function. This is required for correct stack traces
during the execution of the start function.
R=titzer@chromium.org, yangguo@chromium.org
BUG=v8:4203
Review-Url: https://codereview.chromium.org/2413693003
Cr-Commit-Position: refs/heads/master@{#40268}
This moves the implementation of @@replace from regexp.js to builtins-regexp.cc
(the TurboFan fast path) and runtime-regexp.cc (slow path). The fast path
handles all cases in which the regexp itself is an unmodified JSRegExp
instance, the given 'replace' argument is not callable and does not contain any
'$' characters (i.e. we are doing a string replacement).
BUG=v8:5339
Review-Url: https://codereview.chromium.org/2398423002
Cr-Commit-Position: refs/heads/master@{#40253}
This fixes the code-path in RegExpExec in which both the passed exec
argument and regexp.exec are not callable and regexp is a JSRegExp.
In this case, we fall back to the default RegExp.prototype.exec
implementation. The arguments for Execution::call were incorrect.
BUG=v8:5339
Review-Url: https://codereview.chromium.org/2415073002
Cr-Commit-Position: refs/heads/master@{#40249}
I don't see a reason why we can't benefit from preparsing such functions. We don't necessarily compile them, so fully parsing them when unnecessary is just additional overhead.
BUG=v8:5501
Review-Url: https://codereview.chromium.org/2413213002
Cr-Commit-Position: refs/heads/master@{#40248}
This incorporates recent feedback:
- simpler deserialization API by dropping the std::unique_ptr.
The only purpose there was communicating to the caller that they
own the buffer, and that the deserializer won't delete it. The new
design communicates that through a naming choice.
- renamed *UncompiledBytes to *WasmWireBytes
BUG=
Review-Url: https://codereview.chromium.org/2411263004
Cr-Commit-Position: refs/heads/master@{#40238}
The state sampling was implemented in chrome, we had an interface for it
V8 but it was not implemented yet.
The chrome version version has been removed in
https://codereview.chromium.org/2406703002/
Therefore following up with its removal in V8 as well.
This CL can land independent of the Chromium related CL.
R=primiano@chromium.org,alph@chromium.org
Review-Url: https://codereview.chromium.org/2410523002
Cr-Commit-Position: refs/heads/master@{#40232}
Unittests for protocol parser are located in core/inspector in blink and separate test runner for inspector tests was added.
BUG=chromium:635948
R=dgozman@chromium.org,yangguo@chromium.org
Review-Url: https://codereview.chromium.org/2376173002
Cr-Commit-Position: refs/heads/master@{#40226}
Because of the planned improvements of IC system it does not make sense to
keep the old platform version of the stub around.
Review-Url: https://codereview.chromium.org/2413653003
Cr-Commit-Position: refs/heads/master@{#40216}
This CL also introduces a NoBarrierAtomicValue with NoBarrier accessors.
BUG=chromium:648568
Review-Url: https://codereview.chromium.org/2408233004
Cr-Commit-Position: refs/heads/master@{#40213}
Because of the planned improvements of IC system it does not make sense to
keep the old platform version of the stub around.
Review-Url: https://codereview.chromium.org/2418513002
Cr-Commit-Position: refs/heads/master@{#40211}
The only way to get a minus zero result from subtraction is
(-0) - (+0) = -0, hence checking for minus zero on the RHS is
redundant. This is causing some unnecessary deoptimisations
in Box2D from Octane on 32-bit platforms.
BUG=
Review-Url: https://codereview.chromium.org/2410883003
Cr-Commit-Position: refs/heads/master@{#40207}
For the asm.js to WASM pipeline, the current stack traces only show
low-level WASM information.
This CL maps this back to asm.js source positions.
It does so by attaching the asm.js source Script to the compiled WASM
module, and emitting a delta-encoded table which maps from WASM byte
offsets to positions within that Script. As asm.js code does not throw
exceptions, we only store a mapping for call instructions.
The new AsmJsWasmStackFrame implementation inherits from
WasmStackFrame, but contains the logic to provide the source script and
the position inside of it.
What is still missing is the JSFunction object returned by
CallSite.getFunction(). We currently return null.
R=jgruber@chromium.org, titzer@chromium.org
BUG=v8:4203
Review-Url: https://codereview.chromium.org/2404253002
Cr-Commit-Position: refs/heads/master@{#40205}
If passing <nullptr, 0> to the decoder and trying to decode something,
it correctly detects the error and sets an error message, but still
returns true on ok(), and returns a valid result.
I triggered this error by passing a null Vector, returned by FindSection(), to
the decoder.
R=titzer@chromium.org
Review-Url: https://codereview.chromium.org/2410913002
Cr-Commit-Position: refs/heads/master@{#40204}
We accidently dropped the effect on the floor that we have for the
polymorphic map check in case of array elements access.
BUG=chromium:655004
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2411273002
Cr-Commit-Position: refs/heads/master@{#40201}
For ConsString, the left hand side must be either sequential or external
if the right hand side is empty.
R=jarin@chromium.org
BUG=chromium:654723
NOTRY=true
Review-Url: https://codereview.chromium.org/2410893003
Cr-Commit-Position: refs/heads/master@{#40192}
This is a re-land of https://codereview.chromium.org/2393303002/ with
an additional call to DisposeModuleEmbedderData() added to fix lsan failures.
Unifies the approaches used for storing the specifier -> module mapping
and the module -> directory mapping, using std::unordered_maps for both
and storing them per-Context.
This requires adding a method to the v8::Module API to get a hash code
for a Module, but allows slimming down the API in return: gone are
SetEmbedderData/GetEmbedderData, along with the fourth argument
to ResolveModuleCallback.
Besides a simpler API, this allows d8 to get closer to the HTML loader,
which requires each Realm to have a persistent module map (though this
capability is not yet exercised by any tests).
BUG=v8:1569
TBR=neis@chromium.org,jochen@chromium.org
Review-Url: https://codereview.chromium.org/2405313002
Cr-Commit-Position: refs/heads/master@{#40186}
The android_arm config is deprecated. We only use the v8 arch
strings.
NOTRY=true
TBR=adamk, caitp
Review-Url: https://codereview.chromium.org/2412513002
Cr-Commit-Position: refs/heads/master@{#40172}
This is needed for the asm.js -> WASM pipeline. A single exported
function is exported as __single_function__, but we still want to see
the correct function name on the stack, so the underlying wasm function
has to carry the original name.
R=ahaas@chromium.org, titzer@chromium.org
BUG=v8:4203
Review-Url: https://codereview.chromium.org/2406133003
Cr-Commit-Position: refs/heads/master@{#40159}
The test still runs into the 240s timeout on Nexus5 and
Nexus7.
NOTRY=true
TBR=adamk, caitp
Review-Url: https://codereview.chromium.org/2406173002
Cr-Commit-Position: refs/heads/master@{#40151}
This test is timing out in gc-stress mode since RegExp.prototype.test
was moved to C++. RE.proto.test will be improved shortly, and this test
should be reenabled then.
BUG=v8:5339
NOTRY=true
Review-Url: https://codereview.chromium.org/2407133002
Cr-Commit-Position: refs/heads/master@{#40150}
Reason for revert:
Fails under LeakSanitizer on auto-roll fyi bot:
https://build.chromium.org/p/client.v8.fyi/builders/Auto-roll%20-%20release%20process/builds/49447
Original issue's description:
> [modules] Store Module metadata in per-Context EmbedderData
>
> Unifies the approaches used for storing the specifier -> module mapping
> and the module -> directory mapping, using std::unordered_maps for both
> and storing them per-Context.
>
> This requires adding a method to the v8::Module API to get a hash code
> for a Module, but allows slimming down the API in return: gone are
> SetEmbedderData/GetEmbedderData, along with the fourth argument
> to ResolveModuleCallback.
>
> Besides a simpler API, this allows d8 to get closer to the HTML loader,
> which requires each Realm to have a persistent module map (though this
> capability is not yet exercised by any tests).
>
> BUG=v8:1569
>
> Committed: https://crrev.com/9cf8fce74cf6e7afd6aea3f3545f6bb61572f277
> Cr-Commit-Position: refs/heads/master@{#40133}
TBR=jochen@chromium.org,neis@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2406973003
Cr-Commit-Position: refs/heads/master@{#40145}
* Inspector should depend on v8_libbase, v8 depedency is added in conditions section.
* Inlined sources since they aren't used outside of this gyp file.
BUG=chromium:635948
R=dgozman@chromium.org
Review-Url: https://codereview.chromium.org/2408833002
Cr-Commit-Position: refs/heads/master@{#40139}
- Make testcfg.py ignore files ending in "_FIXTURE.js", which are not supposed
to be tested standalone but only as imports to other modules.
- Refine test262.status to match where we are with the modules implementation.
BUG=v8:1569
R=adamk@chromium.org
Review-Url: https://codereview.chromium.org/2400713004
Cr-Commit-Position: refs/heads/master@{#40134}
Unifies the approaches used for storing the specifier -> module mapping
and the module -> directory mapping, using std::unordered_maps for both
and storing them per-Context.
This requires adding a method to the v8::Module API to get a hash code
for a Module, but allows slimming down the API in return: gone are
SetEmbedderData/GetEmbedderData, along with the fourth argument
to ResolveModuleCallback.
Besides a simpler API, this allows d8 to get closer to the HTML loader,
which requires each Realm to have a persistent module map (though this
capability is not yet exercised by any tests).
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2393303002
Cr-Commit-Position: refs/heads/master@{#40133}
Extend a test of namespace imports such that it accesses the object inside a
with statement (inside a sloppy function).
Drive-by-fix: remove duplicate initialization of embedder data (probably due to
bad merge).
R=adamk@chromium.org
BUG=v8:1569
Review-Url: https://codereview.chromium.org/2405603003
Cr-Commit-Position: refs/heads/master@{#40129}
Also add a test for when the first argument is null or undefined, as there are no tests that cover this currently.
BUG=v8:5364
Review-Url: https://codereview.chromium.org/2399423003
Cr-Commit-Position: refs/heads/master@{#40127}
The spurious failures were caused by the compiled module
template and its corresponding owning object getting out of
sync due to memory allocations (which may trigger GC)
between the points each were fetched.
Specifically, the {original} was first obtained; then a GC
may happen when cloning the {code_table}. At this point,
the {original}'s owner may have been collected, getting us
down the path of not cloning. When time comes to patch up
globals, we incorrectly try to patch them assuming the
global start is at 0 (nullptr), which in fact it isn't.
This change roots early, in a GC-free area, both objects.
Additionally, it avoids publishing to the instances chain
the new instance until the very end. This way:
- the objects used to create the new instance offer a
consistent view
- the instances chain does not see the object we try to
form. If something fails, we can safely retry.
- since the owner is rooted, the state of the front of the
instances chain stays unchanged - with the same compiled
module we started from. So the early belief that we needed
to clone is not invalidated by any interspersed GC.
This situation suffers from a sub-optimality discussed in
the design document, in that, in a memory constrained
system, the following snippet may surprisingly fail:
var m = new WebAssembly.Module(...);
var i1 = new WebAssembly.Instance(m);
i1 = null;
var i2 = new WebAssembly.Instance(m); //may fail.
This will be addressed subsequently.
BUG=v8:5451
Review-Url: https://codereview.chromium.org/2395063002
Cr-Commit-Position: refs/heads/master@{#40126}
This CL ports RegExp.prototype.test, RegExp.prototype.match
and RegExp.prototype.search to C++.
Performance regressions are expected but should be improved
in an upcoming CL.
BUG=v8:5339
Review-Url: https://codereview.chromium.org/2394713003
Cr-Commit-Position: refs/heads/master@{#40122}
- Adds an optional representation field to VReg and TestOperand structs.
- Adds a simple FP allocation test to register-allocator-unittest.cc.
- Adds some simple FP tests to move-optimizer-unittest.cc.
LOG=N
BUG=v8:4124
Review-Url: https://codereview.chromium.org/2400513002
Cr-Commit-Position: refs/heads/master@{#40117}
The CL #39795 (https://codereview.chromium.org/2345593003 ) added MultiReturnSelect_f32/MultiReturnSelect_f64 tests.
Because those tests need 2 float point return registers and x87 only has 1 FP return register, Those tests failed at x87 port.
This CL skips MultiReturnSelect_f32/MultiReturnSelect_f64 tests for x87.
BUG=
Review-Url: https://codereview.chromium.org/2405743002
Cr-Commit-Position: refs/heads/master@{#40113}
If an inner function only declares a variable but doesn't use it, Parser
and PreParser produced different unresolved variables, and that confused
the pessimistic context allocation.
This is continuation to https://codereview.chromium.org/2388183003/
This CL fixes more complicated declarations (which are not just one
identifier). For this, PreParser needs to accumulate identifiers used
in expressions.
In addition, this CL manifests FLAG_lazy_inner_functions in tests, so that
we get clusterfuzz coverage for it.
BUG=chromium:650969, v8:5501
Review-Url: https://codereview.chromium.org/2400613003
Cr-Commit-Position: refs/heads/master@{#40112}
There were once plans to generate cross-context code with TurboFan,
however that doesn't fit into the model anymore, and so all of this
is essentially dead untested code (and thus most likely already broken
in subtle ways). With this mode still in place it would also be a lot
harder to make inlining based on SharedFunctionInfo work.
BUG=v8:2206,v8:5499
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2406803002
Cr-Commit-Position: refs/heads/master@{#40109}
Updated the deserialization API to avoid copying uncompiled
bytes.
BUG=
Review-Url: https://codereview.chromium.org/2404673002
Cr-Commit-Position: refs/heads/master@{#40108}
