The current context is stored as a stack slot on the interpreter frame
and therefore we don't need to also maintain a machine register for the
context. Removes this register from bytecode handlers.
In the process modifies this frees up a register on ia32 to keep the
dispatch table pointer in a register rather than on a stack slot on
ia32.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1887493004
Cr-Commit-Position: refs/heads/master@{#35511}
Modifies Ignition to store code entry addresses in the dispatch table
rather than code objects. This allows the interpreter to avoid
calculating the code entry address from the code object on every
dispatch and provides a ~5-7% performance improvement on Octane with
Ignition.
This change adds ArchOpcode::kArchTailCallAddress to TurboFan to enable
tail call dispatch using these code addresses. It also adds a Dispatch
linkage creator (distinct from the stub linkage type used previously) to
allow targetting a code address target (which will diverge further from
the stub linkage type when we remove the context machine register in
Ignition).
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1882073002
Cr-Commit-Position: refs/heads/master@{#35480}
Operand values in Bytecodes.DecodeBytecodeAndOperands test are encoded
in little endian format. The test calls Bytecodes::Decode function which
reads the operands but the values are byte swapped on big endian
machines. Added big endian encoded data which decodes correctly on BE
machines.
BUG=
Review URL: https://codereview.chromium.org/1881423002
Cr-Commit-Position: refs/heads/master@{#35447}
Anotates bytecodes with a description of how each uses the accumulator.
Validates annotations and uses of accumulator when generating bytecode
handlers.
Only prints the accumulator during tracing where used.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1852213002
Cr-Commit-Position: refs/heads/master@{#35281}
Improves code coverage of bytecode array builder and constant
array builder.
Fixes initial index for constant pool slice for kQuad operands.
BUG=v8:4280,chromium:599000
LOG=N
TBR=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1845313002
Cr-Commit-Position: refs/heads/master@{#35201}
Introduces a bytecode whose handler executes the equivalent of %_IsArray and %_IsJSReceiver without a runtime call.
BUG=v8:4822
LOG=y
Review URL: https://codereview.chromium.org/1645763003
Cr-Commit-Position: refs/heads/master@{#34983}
This change introduces wide prefix bytecodes to support wide (16-bit)
and extra-wide (32-bit) operands. It retires the previous
wide-bytecodes and reduces the number of operand types.
Operands are now either scalable or fixed size. Scalable operands
increase in width when a bytecode is prefixed with wide or extra-wide.
The bytecode handler table is extended to 256*3 entries. The
first 256 entries are used for bytecodes with 8-bit operands,
the second 256 entries are used for bytecodes with operands that
scale to 16-bits, and the third group of 256 entries are used for
bytecodes with operands that scale to 32-bits.
LOG=N
BUG=v8:4747,v8:4280
Review URL: https://codereview.chromium.org/1783483002
Cr-Commit-Position: refs/heads/master@{#34955}
We may not emit bytecode for the evaluation of the to-be-returned
expression. In that case we cannot set two return positions for a return
statement (one before and one after the expression evaluation). This
sets the interpreter apart from full-codegen.
Make sure that we always have the second of the two return positions.
Note that we end up with separate test cases for ignition and FCG.
R=rmcilroy@chromium.org, vogelheim@chromium.org
BUG=v8:4690
LOG=N
Review URL: https://codereview.chromium.org/1801473003
Cr-Commit-Position: refs/heads/master@{#34771}
TestNotEqualsStrict is converted to a TestEqualsStrict and logical not
by the parser. Also, CompareIC does not have an implementation for
TestNotEqualsStrict. Hence, removing this bytecode.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1768593002
Cr-Commit-Position: refs/heads/master@{#34527}
Similar to fullcodegen, Ignition now also marks a for-in statement as
slow (via the TypeFeedbackVector) when we have to call %ForInFilter,
i.e. we either have no enumeration cache or the receiver map changes
during an iteration of the for-in map.
R=mstarzinger@chromium.org
BUG=v8:3650
LOG=n
Review URL: https://codereview.chromium.org/1755563002
Cr-Commit-Position: refs/heads/master@{#34391}
Operations on word size data must be word sized, and not word32.
Currently this only generates worse code, but in the future, it
might even generate wrong code, so we should better get this right
from the beginning.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1748953004
Cr-Commit-Position: refs/heads/master@{#34378}
Extends the constant pool to deal with more slices.
Adds ReadUnalignedUInt32().
BUG=v8:4280,v8:4747
LOG=N
Review URL: https://codereview.chromium.org/1731893003
Cr-Commit-Position: refs/heads/master@{#34319}
Reason for revert:
It is not a good idea to call CallICStub from the builtin. It might be sensitive to the frame structure. Constructing a internal frame might cause problems. It is much better to inline the code related to the type feedback vector into the builtin.
Original issue's description:
> [Interpreter] Implements calls through CallICStub in the interpreter.
>
> Calls are implemented through CallICStub to collect type feedback. Adds
> a new builtin called InterpreterPushArgsAndCallIC that pushes the
> arguments onto stack and calls CallICStub.
>
> Also adds two new bytecodes CallIC and CallICWide to indicate calls have to
> go through CallICStub.
>
> MIPS port contributed by balazs.kilvady.
>
> BUG=v8:4280, v8:4680
> LOG=N
>
> Committed: https://crrev.com/20362a2214c11a0f2ea5141b6a79e09458939cec
> Cr-Commit-Position: refs/heads/master@{#34244}
TBR=rmcilroy@chromium.org,mvstanton@chromium.org,mstarzinger@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280, v8:4680
Review URL: https://codereview.chromium.org/1731253003
Cr-Commit-Position: refs/heads/master@{#34252}
Reason for revert:
Build failure on Linux64 arm64 ASAN:
http://build.chromium.org/p/client.v8/builders/V8%20Linux64%20ASAN%20arm64%20-%20debug%20builder/builds/4829
(Leaks memory, somehow.)
Original issue's description:
> Encode interpreter::SourcePositionTable as variable-length ints.
>
> This reduces the memory consumption of SourcePositionTable by ca. 2/3.
> Over Octane, this reduces the source position table memory consumption
> from ~370kB to ~115kB, which makes it ca. 10% of the total bytecode size
> (~1.1MB)
>
> BUG=
>
> Committed: https://crrev.com/a6f41f7b8226555c5900440f6e3092b3545ee0f6
> Cr-Commit-Position: refs/heads/master@{#34250}
TBR=jochen@chromium.org,rmcilroy@chromium.org,yangguo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1728193003
Cr-Commit-Position: refs/heads/master@{#34251}
This reduces the memory consumption of SourcePositionTable by ca. 2/3.
Over Octane, this reduces the source position table memory consumption
from ~370kB to ~115kB, which makes it ca. 10% of the total bytecode size
(~1.1MB)
BUG=
Review URL: https://codereview.chromium.org/1704943002
Cr-Commit-Position: refs/heads/master@{#34250}
Calls are implemented through CallICStub to collect type feedback. Adds
a new builtin called InterpreterPushArgsAndCallIC that pushes the
arguments onto stack and calls CallICStub.
Also adds two new bytecodes CallIC and CallICWide to indicate calls have to
go through CallICStub.
MIPS port contributed by balazs.kilvady.
BUG=v8:4280, v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1688283003
Cr-Commit-Position: refs/heads/master@{#34244}
Adds a profiling counter to each BytecodeArray object, and adds
code to Jump and Return bytecode handlers to update this
counter by the size of the jump or the distance from the return
to the start of the function. This is more accurate than fullcodegen's
approach since it takes forward jumps into account as well as back-edges.
Modifies RuntimeProfiler to track ticks for interpreted frames.
Currently we use the SharedFunctionInfo::profiler_ticks() instead
of adding another to tick field to avoid adding another field to
BytecodeArray since SharedFunctionInfo::profiler_ticks() is only
used by Crankshaft otherwise so we shouldn't need both for
BUG=v8:4689
LOG=N
Review URL: https://codereview.chromium.org/1707693003
Cr-Commit-Position: refs/heads/master@{#34166}
This CL introduces two new bytecodes TailCall and TailCallWide.
BUG=v8:4698,v8:4687
LOG=N
Review URL: https://codereview.chromium.org/1698273003
Cr-Commit-Position: refs/heads/master@{#34083}
Reduces time for ConstantArrayBuilderTest.AllocateAllEntries from 21000ms to 106ms in
debug mode.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1696363002
Cr-Commit-Position: refs/heads/master@{#34038}
Adds JumpIfNotHoleConstant and JumpIfNotHoleConstantWide bytecodes
and removes JumpIfHole bytecode.
In situations with large numbers of constants, the generator would
fail because an 8-bit constant could not be reserved for
JumpIfHole/JumpIfNotHole and so a 16-bit constant would be reserved.
Then when patching the bytecode the patcher would discover there was
no wide constant variant of the emitted jump.
BUG=v8:4280,v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1697473002
Cr-Commit-Position: refs/heads/master@{#33952}
Apparently, this BytecodeArrayIterator method was missed during the
previous refactor. No other (collateral) change was done.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1691433002
Cr-Commit-Position: refs/heads/master@{#33909}
This replaces the bytecode in question with a runtime call within the
bytecode stream. The tradeoff is to safe one bytecode opcode for more
expensive encoding of lookup slot deletion.
R=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1690913002
Cr-Commit-Position: refs/heads/master@{#33907}
Reason for revert:
[Sheriff] Breaks the tree:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20builder/builds/13892
Blamelists are wrong because of overloaded master. The trybots on this CL might have been outdated by the time of commit... Please rebase and retry.
Original issue's description:
> [Interpreter] Rename GetCountOperand to GetRegisterCountOperand.
>
> Apparently, this BytecodeArrayIterator method was missed during the
> previous refactor. No other (collateral) change was done.
>
> BUG=v8:4280
> LOG=N
>
> Committed: https://crrev.com/3781ca79f5c48b55d7f0bf6df370ec11515a1466
> Cr-Commit-Position: refs/heads/master@{#33897}
TBR=oth@chromium.org,rmcilroy@chromium.org,mstarzinger@chromium.org,ssanfilippo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review URL: https://codereview.chromium.org/1690963002
Cr-Commit-Position: refs/heads/master@{#33900}
Apparently, this BytecodeArrayIterator method was missed during the
previous refactor. No other (collateral) change was done.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1691433002
Cr-Commit-Position: refs/heads/master@{#33897}
Add dedicated %LoadLookupSlot, %LoadLookupSlotInsideTypeof,
%LoadLookupSlotForCall, %StoreLookupSlot_Sloppy and
%StoreLookupSlot_Strict runtime entry points and use them
appropriately in the various compilers. This way we can
finally drop the machine operators from the JS graph level
completely in TurboFan.
Also drop the funky JSLoadDynamic operator from TurboFan,
which was by now just a small wrapper around the runtime
call to %LoadLookupSlot.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1683103002
Cr-Commit-Position: refs/heads/master@{#33880}
Moves InterpreterAssembler out of the compiler directory and into the
interpreter directory. Makes InterpreterAssembler as subclass of
CodeStubAssembler.
As part of this change, the special bytecode dispatch linkage type
is removed and instead we use a InterfaceDispatchDescriptor and
a normal CodeStub linkage type.
Removes a bunch of duplicated logic in InterpreterAssembler and
instead uses the CodeStubAssembler logic. Refactors Interpreter
with these changes.
Modifies CodeStubAssembler to add the extra operations required
by the Interpreter (extra call types, raw memory access and some extra
binary ops). Also adds the ability for subclasses to add extra
prologue and epilogue operations around calls, which is required
for the Interpreter.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1673333004
Cr-Commit-Position: refs/heads/master@{#33873}
This allows us to remove the somewhat awkward BuildLoadObjectField
from the BytecodeGraphBuilder and also allows us to simplify the
bytecode stream for class literals.
R=oth@chromium.org
Review URL: https://codereview.chromium.org/1678103002
Cr-Commit-Position: refs/heads/master@{#33820}
Adds implementation and tests to support const/let variables in the
interpreter.
BUG=v8:4280,v8:4679
LOG=N
Review URL: https://codereview.chromium.org/1634153002
Cr-Commit-Position: refs/heads/master@{#33819}
Replace the somewhat awkward RestParamAccessStub, which would always
call into the runtime anyway with a proper FastNewRestParameterStub,
which is basically based on the code that was already there for strict
arguments object materialization. But for rest parameters we could
optimize even further (leading to 8-10x improvements for functions with
rest parameters), by fixing the internal formal parameter count:
Every SharedFunctionInfo has a formal_parameter_count field, which
specifies the number of formal parameters, and is used to decide whether
we need to create an arguments adaptor frame when calling a function
(i.e. if there's a mismatch between the actual and expected parameters).
Previously the formal_parameter_count included the rest parameter, which
was sort of unfortunate, as that meant that calling a function with only
the non-rest parameters still required an arguments adaptor (plus some
other oddities). Now with this CL we fix, so that we do no longer
include the rest parameter in that count. Thereby checking for rest
parameters is very efficient, as we only need to check whether there is
an arguments adaptor frame, and if not create an empty array, otherwise
check whether the arguments adaptor frame has more parameters than
specified by the formal_parameter_count.
The FastNewRestParameterStub is written in a way that it can be directly
used by Ignition as well, and with some tweaks to the TurboFan backends
and the CodeStubAssembler, we should be able to rewrite it as
TurboFanCodeStub in the near future.
Drive-by-fix: Refactor and unify the CreateArgumentsType which was
different in TurboFan and Ignition; now we have a single enum class
which is used in both TurboFan and Ignition.
R=jarin@chromium.org, rmcilroy@chromium.orgTBR=rossberg@chromium.org
BUG=v8:2159
LOG=n
Review URL: https://codereview.chromium.org/1676883002
Cr-Commit-Position: refs/heads/master@{#33809}
Moves the stack check from the function entry trampoline to instead be
after function activation using an explicit StackCheck bytecode. Also
add stack checks on back edges of loops.
BUG=v8:4280,v8:4678
LOG=N
Review URL: https://codereview.chromium.org/1665853002
Cr-Commit-Position: refs/heads/master@{#33730}
Moves the temporary register allocator out of the bytecode array
builder into TemporaryRegisterAllocator class and adds unittests.
Particular must be taken around the translation window boundary
motivating the addition of tests.
Also adds a Clear() method to IdentityMap() which is called by
the destructor. This allows classes to hold an IdentityMap if
they are zone allocated. Classes must call Clear() before the zone
is re-cycled or face v8 heap corruption.
BUG=v8:4280,v8:4675
LOG=N
Review URL: https://codereview.chromium.org/1651133002
Cr-Commit-Position: refs/heads/master@{#33686}
Introduces the concept of transfer direction to register operands. This
enables the register translator to emit exactly the moves that a
bytecode having it's register operands translated needs.
BUG=v8:4280,v8:4675
LOG=N
Review URL: https://codereview.chromium.org/1633153002
Cr-Commit-Position: refs/heads/master@{#33544}
This increases the size of register operands to be 16-bit.
Not all bytecodes have wide register variants, so when they are
needed a register translator will copy them into a small area
reserved at the top of the 8-bit register range and these registers
are supplied as arguments to the bytecode with 8-bit operands.
This is non-intrusive for typical bytecode where the number of
registers is less than 120. For bytecodes with wide register
operands (above the window) their index needs to be translated
to avoid the reserved translation window.
Enables splay.js to run in Octane and a handful of mjsunit tests.
BUG=v8:4280,v8:4675
LOG=NO
Review URL: https://codereview.chromium.org/1613163002
Cr-Commit-Position: refs/heads/master@{#33516}
This adds an explicit ReThrow bytecode to be used in the modelling of
try-finally statements. An exception that is being re-thrown should not
trigger message object creation or location computation and hence cannot
use the existing Throw bytecode.
R=rmcilroy@chromium.org
TEST=cctest/test-interpreter/InterpreterTryFinally
BUG=v8:4674
LOG=n
Review URL: https://codereview.chromium.org/1621673002
Cr-Commit-Position: refs/heads/master@{#33472}
o Adds wide variants of bytecodes that have operands describing ranges
of registers. The upcoming wide register support does not suppport
re-mapping ranges.
o Adds kRegPair16 and kRegTriple16 operands required for new wide
bytecodes and renames Count8/Count16 operands to RegCount8/RegCount16.
o Removes Exchange bytecodes
BUG=v8:4675
LOG=NO
Review URL: https://codereview.chromium.org/1595103006
Cr-Commit-Position: refs/heads/master@{#33389}
Make ForInPrepare take a kRegTriple8 operand and ForInNext take kRegPair8
operand for cache state. This is to ensure that the cache state output of
ForInPrepare is in consecutive registers to allow us to deopt the
ForInPrepare node from TF->Ignition (to be done in a followup CL).
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1584813002
Cr-Commit-Position: refs/heads/master@{#33357}
Split RegisterAllocationScope out of ExpressionResult and allocate one
for each statement. This ensures that we always have an outer register
allocation scope for statement code (used in CountOperation and
RegisterExecutionResult). Also refactored the register allocator code to
move it to it's own file and rename from TemporaryRegisterScope to
BytecodeRegisterAllocator.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1587033002
Cr-Commit-Position: refs/heads/master@{#33296}
Adds support for calling runtime functions which return a pair of
values. Adds the bytecode CallRuntimePair. Also adds support to TurboFan
for calling stubs which return multiple values.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1568493002
Cr-Commit-Position: refs/heads/master@{#33181}
This increases the size of addressable constant pool entries for jumps
to match other bytecodes using operands indexing the constant pool.
This change also introduces reservations for constant pool entries.
Reservations are used for forward jumps to ensure a constant pool entry
will be available when the jump target (label) is bound and the jump is
patched up in the bytecode array.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1546683002
Cr-Commit-Position: refs/heads/master@{#33125}
New bytecodes for making registers with indicies wider than 1-byte
accessible.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1555713002
Cr-Commit-Position: refs/heads/master@{#33091}
Changes LoadGlobal, StoreGlobal, LoadNamedProperty, and StoreNamedProperty to accept
the name of variable instead of index into the constant pool entry. Also made
GetConstantPoolEntry as a private function since it is no longer used outside of
BytecodeArrayBuilder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1546643002
Cr-Commit-Position: refs/heads/master@{#33020}
Adds support for deleting a variable in a lookup slot. Adds a new bytecode,
its implementation and tests. Also adds support for this bytecode to the
bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1542083002
Cr-Commit-Position: refs/heads/master@{#33019}
A pre-requisite for this change was changing the interpreter to use
Runtime::ForInStep to bring the interpreter implementation closer
to the turbofan implementation. Also required to flatten out the
cache parameters into the interpreter frame for de-opt.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1531693002
Cr-Commit-Position: refs/heads/master@{#32986}
Adds support for loading and storing lookup variables.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1524803003
Cr-Commit-Position: refs/heads/master@{#32913}
Adds implementation and tests for CreateObjectLiteral, CreateArrayLiteral and CreateRegExpLiteral
to bytecode graph builder. Also changes these bytecodes to expect three operands instead of using
accumulator to pass one of the operands. This is done to avoid looking into the earlier nodes to
fetch operands in the bytecode graph builder. Also adds support for wide variant of these
bytecodes to bytecode generator and bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1503963002
Cr-Commit-Position: refs/heads/master@{#32710}
ES6 section 12.2.8.1 states that flags for regular expression literals
must be checked during parsing and invalid flags are early errors. This
change adapts the Scanner and (Pre)Parser to act according to the spec.
This is also a prerequisite to unify the handling of literal creation
(for Objects, Arrays, Regexps, and at some point Classes).
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1472323002
Cr-Commit-Position: refs/heads/master@{#32273}
Adds code and tests to support CreateClosure bytecode when building
graphs.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1458603012
Cr-Commit-Position: refs/heads/master@{#32224}
This change introduces register re-mapping to avoid assignment hazards
in binary expressions. Expressions that cause problems typically have
the form y = x + (x = 4);. The problem occurs because the lhs value
evaluates to the register holding x. The rhs updates that register and
then applying the operation would use the new value as the lhs.
By tracking loads and stores in binary expressions the generator is now
able to detect when condition occurs and uses a temporary register for
the rhs value. When the binary expression evaluation is complete the
variable is updated with the latest temporary.
A new bytecode Mov performs this update without touching the
accumulator.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1412683011
Cr-Commit-Position: refs/heads/master@{#32141}
Adds support for visiting the Call bytecode to the bytecode graph builder.
This change also adds the call type feedback slot to the Call bytecode.
This is not currently used by the interpreter, but is used by the
graph builder.
Also adds a CallWide varient of the Call bytecode, and adds the kCount16
operand type.
Landed on behalf of rmcilroy.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1456453002
Cr-Commit-Position: refs/heads/master@{#32033}
Adds an optimization to omit generating Ldar/Star if the same register
is loaded or stored from the accumulator in the earlier instruction.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1435283002
Cr-Commit-Position: refs/heads/master@{#31984}
Adds support for calling JS runtime functions. Also changes the bytecode
array builder to allow calling functions with an invalid argument
register if the call takes no arguments.
Adds the bytecode CallJSRuntime.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1410003003
Cr-Commit-Position: refs/heads/master@{#31774}
Corrects LdaGlobal to deal with TypeofMode::INSIDE_TYPEOF so that it
doesn't throw a reference error on undefined globals.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1422443006
Cr-Commit-Position: refs/heads/master@{#31757}
Existing code was assuming that 'lexical' blocks were the same as basic
blocks, therefore code which emitted jumps within a lexical block (e.g.,
logical or) would in some occassions incorrectly omit a necessary
ToBoolean.
This change removes Enter/LeaveBlock from BytecodeArrayBuilder and
instead tracks basic blocks via label bindings and jump operations. The
change also ensures we don't emit dead code at the end of a basic block,
and adds tests of the edge cases.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1406983010
Cr-Commit-Position: refs/heads/master@{#31741}
Adds an optimization to emit JumpIfToBooleanTrue/False instead
of ToBoolean followed by JumpIfTrue/False if the value in the
accumulator is not boolean.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1426913002
Cr-Commit-Position: refs/heads/master@{#31697}
For..in introduces 3 new bytecodes ForInPrepare, ForInNext, and
ForInDone to start a for..in loop, get the next element, and check if
the loop is done.
For..in builds upon new LoopBuilder constructs for conditionally
breaking and continuing during iteration: BreakIf{Null|Undefined}
and ContinueIf{Null|Undefined}. New conditional jump bytecodes
support this succinctly: JumpIfNull and JumpIfUndefined.
Add missing check to BytecodeLabel that could allow multiple
forward referencess to the same label which is not supported.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1422033002
Cr-Commit-Position: refs/heads/master@{#31651}
Adds support for delete operator, it's implementation and tests.
Adds tests for the following unary operators
-BitwiseNot
-Add
-Sub
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1410953003
Cr-Commit-Position: refs/heads/master@{#31620}
Fills out some more of the function prologue support in the
interpreter. Deals with creation of arguments objects and throwing
IllegalRedeclarations if necessary. Also adds (untested) support for
this.function and new.target variable assignment.
Also fixes a bug in Frames::is_java_script() to deal with
interpreter frames correctly.
Cleans up comments in builtins InterpreterEntryTrampoline about
missing prologue support.
Adds the following bytecodes:
- CreateArgumentsSloppy
- CreateArgumentsStrict
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1412953007
Cr-Commit-Position: refs/heads/master@{#31486}
Adds support for count operations to the interpreter. Deals with count
operations on locals, globals, context allocated variables and named and
keyed properties.
Adds the following bytecodes:
ToNumber
Inc
Dec
BUG=v8:4280
LOG=N
TBR=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1416623003
Cr-Commit-Position: refs/heads/master@{#31484}
Unifies the global and unallocated variable type accesses given that
--global_var_shortcuts is going away. Lda/StaGlobal is modified to use
Load/StoreICs on the global object. The named LoadIC and StoreIC bytecodes
are also modified so that they take a constant pool entry index for the
name rather than a register, avoiding unecessary LdaConstant bytecodes to
be emitted.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1419003002
Cr-Commit-Position: refs/heads/master@{#31482}
The plan is to implement the same idea using vector IC machinery.
Stubs implementations and scopes modifications are left untouched for now.
Review URL: https://codereview.chromium.org/1419823003
Cr-Commit-Position: refs/heads/master@{#31458}
This change adds new flavors of Visit() methods for obtaining
expression results:
- VisitForAccumulatorValue() which places result in the accumulator.
- VisitForRegisterValue() which places the result in a register.
- VisitForEffect() which evaluates the expression and discards the result.
The targets of these calls place the expression result with
result_scope()->SetResultInRegister() or
result_scope()->SetResultInAccumulator().
By being smarter about result locations, there's less temporary
register usage. However, we now have a hazard with assignments
in binary expressions that didn't exist before. This change detects and
DCHECK's when a hazard is detected. A follow on CL will address this.
There are consequential changes to test-bytecode-generator.cc and
this change also adds new bytecode macros A(x, n) and THIS(n) for
register file entries for arguments and this.
BUG=v8:4280
LOG=NO
Review URL: https://codereview.chromium.org/1392933002
Cr-Commit-Position: refs/heads/master@{#31445}
Adds support for local context loads and stores. Also adds support for
creation of new block contexts (e.g., for let variables) and initializing
const / let variables with the hole appropriately.
Also adds some checks to ensure BytecodeArrayBuilder::context_count is set
appropriately and fixes tests to do so.
Adds the bytecode StaContextSlot.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1403943004
Cr-Commit-Position: refs/heads/master@{#31343}
This change add a new bytecode for operator new and implements it using
the Construct() builtin.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1402943002
Cr-Commit-Position: refs/heads/master@{#31293}
Adds support for following operators
-Logical and
-Logical or
-Comma
Adds the above bytecodes, support to BytecodeGenerator and BytecodeArrayBuilder
to enable it's use, it's implementation and tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1399773002
Cr-Commit-Position: refs/heads/master@{#31281}
Replaces the use of KeyedStoreICGeneric with a vector based KeyedStoreIC for
array literal computed stores now that there is a feedback vector slot for
these expressions. Removes KeyedStoreICGeneric bytecode since this is no
longer necessary.
BUG=v8:4280
LOG=N
TBR=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1400353002
Cr-Commit-Position: refs/heads/master@{#31262}
Adds Object literal support to the interpreter. Adds the following bytecodes:
- ToName
- CreateObjectLiteral.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1386313005
Cr-Commit-Position: refs/heads/master@{#31253}
Adds array literal support to the interpreter. Currently constructed
array elements don't have type feedback slots, so also adds support for
generic keyed store operations.
Adds the following bytecodes:
- CreateArrayLiteral
- KeyedStoreICGeneric
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1400753003
Cr-Commit-Position: refs/heads/master@{#31240}
Adds support for creation of new local function contexts (or script context for
top-level code). As part of this, also adds support for context push/pop
operations using a ContextScope object in BytecodeGenerator. Adds the following
bytecodes:
- PushContext
- PopContext
Support for inner contexts and loading from / storing to context allocated
variables will come in a future CL.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1379793004
Cr-Commit-Position: refs/heads/master@{#31238}
Adds function literal support and add support for OTHER_CALLS which can be
made when calling a function literal.
Adds the CreateClosure bytecode.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1396693003
Cr-Commit-Position: refs/heads/master@{#31231}
-Bitwise Or
-Bitwise Xor
-Bitwise And
Adds the above bytecodes, support to BytecodeGenerator and BytecodeArrayBuilder to enable it's use, it's implementation and tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1386133002
Cr-Commit-Position: refs/heads/master@{#31210}
Adds support for following operators
-Shift left
-Shift right
-Shift right logical
Adds the above bytecodes, support to BytecodeGenerator and BytecodeArrayBuilder
to enable it's use, it's implementation and tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1392913002
Cr-Commit-Position: refs/heads/master@{#31205}
Implements support for declaring global variables. Also adds support for loading
from and storing to both global and unallocated global variables. Adds the
following bytecodes:
- StoreGlobal
- LoadContextSlot
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1378523005
Cr-Commit-Position: refs/heads/master@{#31166}
Adds support for strict mode load / store ICs and cleans up BinaryOp and
CompareOp to only trigger an UNIMPLEMENTED abort if called with STRONG
mode (which is the only language mode which has different compare/binary ops.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1385623002
Cr-Commit-Position: refs/heads/master@{#31134}
Implementations and tests for typeof, void, and logical not.
Add missing string type to Object::TypeOf.
BUG=v8:4280
LOG=NO
Review URL: https://codereview.chromium.org/1390483002
Cr-Commit-Position: refs/heads/master@{#31124}
Adds support for calling runtime functions from the interpreter. Adds the
CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
and the arguments in sequential registers. Adds a InterpreterCEntry builtin
to enable the interpreter to enter C++ code based on the functionId.
Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
and groups all the interpreter builtins together.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1362383002
Cr-Commit-Position: refs/heads/master@{#31089}
Reason for revert:
Now breaking arm32 debug bot (worked locally even with --debug-code, so I'll need to figure out what's different on the bot)
Original issue's description:
> [Interpreter] Add CallRuntime support to the interpreter.
>
> Adds support for calling runtime functions from the interpreter. Adds the
> CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
> and the arguments in sequential registers. Adds a InterpreterCEntry builtin
> to enable the interpreter to enter C++ code based on the functionId.
>
> Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
> and groups all the interpreter builtins together.
>
> BUG=v8:4280
> LOG=N
>
TBR=bmeurer@chromium.org,oth@chromium.org,mstarzinger@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review URL: https://codereview.chromium.org/1379933003
Cr-Commit-Position: refs/heads/master@{#31078}
Adds support for calling runtime functions from the interpreter. Adds the
CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
and the arguments in sequential registers. Adds a InterpreterCEntry builtin
to enable the interpreter to enter C++ code based on the functionId.
Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
and groups all the interpreter builtins together.
BUG=v8:4280
LOG=N
Committed: https://crrev.com/40e8424b744f8b6e3e1d93e20f23487419911dfc
Cr-Commit-Position: refs/heads/master@{#31064}
Review URL: https://codereview.chromium.org/1362383002
Cr-Commit-Position: refs/heads/master@{#31076}
Reason for revert:
Broke Arm64 bot (CEntry stub is trying to pop arguments off stack when argv_in_reg, so I need to fix this).
Original issue's description:
> [Interpreter] Add CallRuntime support to the interpreter.
>
> Adds support for calling runtime functions from the interpreter. Adds the
> CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
> and the arguments in sequential registers. Adds a InterpreterCEntry builtin
> to enable the interpreter to enter C++ code based on the functionId.
>
> Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
> and groups all the interpreter builtins together.
>
> BUG=v8:4280
> LOG=N
>
> Committed: https://crrev.com/40e8424b744f8b6e3e1d93e20f23487419911dfc
> Cr-Commit-Position: refs/heads/master@{#31064}
TBR=bmeurer@chromium.org,oth@chromium.org,mstarzinger@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review URL: https://codereview.chromium.org/1387543002
Cr-Commit-Position: refs/heads/master@{#31066}
Adds support for calling runtime functions from the interpreter. Adds the
CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
and the arguments in sequential registers. Adds a InterpreterCEntry builtin
to enable the interpreter to enter C++ code based on the functionId.
Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
and groups all the interpreter builtins together.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1362383002
Cr-Commit-Position: refs/heads/master@{#31064}
Adds support for short operands, starting with kIdx16. Introduces
BytecodeTraits to enable compile time determination of various traits for a
bytecode, such as size, operands, etc. Reworks BytecodeIterator,
BytecodeArrayBuilder and Bytecodes::Decode to support 16 bit operands. Adds
support to Interpreter to load 16 bit operands.
Also fixes a bug with ToBoolean where it wouldn't get emitted at the start
of a block, and added a test.
BytecodeTraits template magic inspired by oth@chromium.org.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1370893002
Cr-Commit-Position: refs/heads/master@{#31058}
The comparison operators and ToBoolean are implemented by calling into
the runtime. There are new runtime methods are prefixed with Interpreter
to make use case clear.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1369123002
Cr-Commit-Position: refs/heads/master@{#30983}
+ Add bytecodes for conditional and unconditional jumps.
+ Add bytecodes for test/compare operations.
+ Expose jumps in bytecode-array-builder and add BytecodeLabel class for
identifying jump targets.
+ Add support for if..then...else in the bytecode-generator.
+ Implement jump bytecodes in the interpreter. Test/compare operations
dependent on runtime call for comparisons.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1343363002
Cr-Commit-Position: refs/heads/master@{#30918}
Adds LdaGlobal bytecode and augments BytecodeGenerator to load globals for
global variables and function calls.
Modified TestBytecodeGenerator to add the ability to specify that a bytecode
operand has an unknown value (used so we don't need to figure out the slot
index of a global). Also added a helper which checks equality of BytecodeArray
with the expected snipptets.
Modified TestInterpreter to allow it to take snippets of JS and have the
BytecodeGenerator generate the bytecode rather than having to build a
BytecodeArray manually. This is used to enable the global tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1361113002
Cr-Commit-Position: refs/heads/master@{#30910}
Adds support for JS calls to the interpreter. In order to support
calls from the interpreter, the PushArgsAndCall builtin is added
which pushes a sequence of arguments onto the stack and calls
builtin::Call.
Adds the Call bytecode.
MIPS port contributed by akos.palfi@imgtec.com in https://codereview.chromium.org/1334873002/
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1323463005
Cr-Commit-Position: refs/heads/master@{#30710}
Adds support for property store operations via Store/KeyedStore ICs. Adds the
following bytecodes:
- StoreIC
- KeyedStoreIC
The --vector_store flag is now required for --ignition.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1319833004
Cr-Commit-Position: refs/heads/master@{#30660}
Add methods for converting parameter index to a register and vice-versa.
Move Register class into bytecodes.h.
Update Bytecodes::Decode to pretty print parameters.
BUG=v8:4280
LOG=NO
Review URL: https://codereview.chromium.org/1325983002
Cr-Commit-Position: refs/heads/master@{#30549}
Adds support for property load operations via Load/KeyedLoad ICs. Adds the
following bytecodes:
- LoadIC
- KeyedLoadIC
Also adds support to the interpreter assembler for loading the type feedback
vector from the function on the stack, and calling ICs.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1309843007
Cr-Commit-Position: refs/heads/master@{#30543}
Adds support to the interpreter for loading literals from the constant pool.
Adds the LoadConstant bytecode and makes use of it for loading large Smis and
HeapObject literals.
Also removes unused HandleVector from utils.h.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1321663003
Cr-Commit-Position: refs/heads/master@{#30450}
Adds support for parameters to the BytecodeArrayBuilder and BytecodeGenerator.
Parameters are accessed as negative interpreter registers.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1303403004
Cr-Commit-Position: refs/heads/master@{#30403}
Adds implementations and tests for the following bytecodes:
- Add
- Sub
- Mul
- Div
- Mod
Also adds the Mod bytecode and adds support to BytecodeGenerator and
BytecodeArrayBuilder to enable it's use.
The current bytecodes always call through to the JS builtins. This also adds
LoadObjectField and CallJSBuiltin operators to the InterpreterAssembler.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1300813005
Cr-Commit-Position: refs/heads/master@{#30352}
Modifies the BytecodeArrayBuilder to create register operands which are
negative. This reduces the number of instructions to access registers
by the interpreter and allows us to use positive register operands to
access parameter values.
Adds a Register class to keep register usage typesafe and simplify the
convertion to bytecode operand values.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1283313003
Cr-Commit-Position: refs/heads/master@{#30151}
