This particularly changes the StackTraceFrameIterator such that is not
only returs JavaScriptFrames, but also WasmFrames. Because of that,
some methods (Summarize, function, receiver) were pulled up to the
StandardFrame, with specializations in JavaScriptFrame and WasmFrame.
R=jfb@chromium.org, titzer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1861283002
Cr-Commit-Position: refs/heads/master@{#35293}
1) I moved the implementations of the wrapper functions into a new cc
file so that I can use these wrapper functions in tests.
2) I made a generic test for all tests in
test-run-calls-to-external-references.cc. In the new test we only
compare the result of a function call through an external reference with
the result of a direct function call. This is sufficient because we only
want to test function calls through external references work here.
The implementation of these functions are tested somewhere else.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1853123002
Cr-Commit-Position: refs/heads/master@{#35289}
This makes sure the SharedFunctionInfo is available whenever we evaluate
the UseIgnition predicate. This makes sure we can apply filters properly
even when the interpreter causes eager compilation (instead of lazy).
R=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1860943002
Cr-Commit-Position: refs/heads/master@{#35263}
This change removes the large contiguous backing store from the young generation
and replaces it regular pages.
We keep a pool of pages that are committed/uncommitted to avoid creating virtual
memory maps during growing and shrinking.
BUG=chromium:581412
LOG=N
Review URL: https://codereview.chromium.org/1853783002
Cr-Commit-Position: refs/heads/master@{#35261}
There were a couple of issues with it:
- interpreter is not supported
- the source position was just accidentally correct for full-codegen
- the eval origin could have been cached
Also fixes a few other places to use AbstractCode.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1854713002
Cr-Commit-Position: refs/heads/master@{#35257}
When seeing a rest pattern, we used to get the remaining elements from the
iterator by calling %concat_iterable_to_array on it. This was wrong because it
caused an observable [[Get]] for @@iterator (which the iterator may not even
provide).
This CL gets rid of the call to %concat_iterable_to_array and does the iteration
manually in a simple while-loop. It also gets rid of %concat_iterable_to_array
itself because there aren't any other uses of it.
BUG=v8:4759
LOG=n
R=adamk@chromium.org
Review URL: https://codereview.chromium.org/1852703002
Cr-Commit-Position: refs/heads/master@{#35251}
The background here is that graphs generated from WASM are not trimmed.
That means there can be some floating control diamonds that are not
reachable from end. An assertion in the scheduler for phis from floating
diamonds checks that the use edge in this situation is the control edge,
but in general, any edge could cause this.
Scheduling still works without this assertion. The longer term fix
is to either trim the graphs (more compile time overhead for WASM)
or improve the scheduler's handling of dead code in the graph. Currently
it does not schedule dead code but the potential use positions of
dead code are used in the computation of the common dominator of uses. We could
recognize dead nodes in PrepareUses() and check in GetBlockForUse()
as per TODO.
R=bradnelson@chromium.org, mstarzinger@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1846933002
Cr-Commit-Position: refs/heads/master@{#35245}
Run_Wasm_F32CopySign was failing because function copysign
that is used to verify the results does implicit conversion
from float to double. In this conversion we lose information
about NaN sign and the test fails.
Fix by using copysignf to avoid unnecessary float to double
conversion.
TEST=cctest/test-run-wasm/Run_Wasm_F32CopySign
BUG=
Review URL: https://codereview.chromium.org/1857753002
Cr-Commit-Position: refs/heads/master@{#35237}
The parser uses a try-catch in order to record when the client of an iterator
throws. The exception then used to get rethrown via 'throw', which
unfortunately resulted in the original exception message object getting
overwritten.
This CL solves this as follows:
- add a clear_pending_message flag to TryCatchStatement (set to true in normal
cases),
- set clear_pending_message to false for the TryCatchStatement used in iterator
finalization
- change full-codegen, turbofan, and the interpreter to emit the ClearPendingMessage call
only when the flag is set,
- replace 'throw' with '%ReThrow' in the iterator finalization code, thus
reusing the (not-cleared) pending message
R=littledan@chromium.org, mstarzinger@chromium.org, yangguo@chromium.org
BUG=v8:4875
LOG=n
Review URL: https://codereview.chromium.org/1842953003
Cr-Commit-Position: refs/heads/master@{#35226}
- RegExp.prototype.toString() doesn't have any special handling of
RegExp instances and simply calls the source and flags getters
- Use the original values of global and sticky, rather than based
on the current flag getters, as specified in
https://github.com/tc39/ecma262/pull/494R=yangguo@chromium.org,adamk
LOG=Y
BUG=v8:4602
Review URL: https://codereview.chromium.org/1846303002
Cr-Commit-Position: refs/heads/master@{#35225}
This allows us to remove the troublesome %_MathClz32 intrinsic and also
allows us to utilize the functionality that is already available in
TurboFan. Also introduce a proper NumberClz32 operator so we don't need
to introduce a machine operator at the JS level.
R=epertoso@chromium.org
Review URL: https://codereview.chromium.org/1852553003
Cr-Commit-Position: refs/heads/master@{#35208}
Improves code coverage of bytecode array builder and constant
array builder.
Fixes initial index for constant pool slice for kQuad operands.
BUG=v8:4280,chromium:599000
LOG=N
TBR=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1845313002
Cr-Commit-Position: refs/heads/master@{#35201}
We expect that the majority of malloc'd memory held by V8 is allocated
in Zone objects. Introduce an Allocator class that is used by Zones to
manage memory, and allows for querying the current usage.
BUG=none
R=titzer@chromium.org,bmeurer@chromium.org,jarin@chromium.org
LOG=n
TBR=rossberg@chromium.org
Review URL: https://codereview.chromium.org/1847543002
Cr-Commit-Position: refs/heads/master@{#35196}
*) For all tests the input validation was incorrect, i.e. some values
were considered invalid although they were valid. The problem was that
values which are outside int range can get in range through truncation.
*) Removed an assertion in the x64 code generation of
TruncateFloat64ToUint32 which trapped on negative inputs.
*) Introduced a new TF operator TruncateFloat32ToUint32 which does
the same as ChangeFloat32ToUint32 but does not trap on negative inputs.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1843983002
Cr-Commit-Position: refs/heads/master@{#35176}
Test case objects were sorted without key function, resulting
in random sort order. On sharded builds, the shards are
determined by the sort order and rely on a deterministic
sorting. This led to random cctest and unittest cases being
dropped or executed twice on sharded testers.
TBR=jkummerow@chromium.org, hablich@chromium.org
Review URL: https://codereview.chromium.org/1842673002
Cr-Commit-Position: refs/heads/master@{#35151}
If a script is unloaded between the collection of an allocation and the
tranlation of an allocation profile, the profiler will segfault. With
this change, we report unloaded scripts as having no line number,column
number, or name.
R=ofrobots@google.com
BUG=
Review URL: https://codereview.chromium.org/1846723002
Cr-Commit-Position: refs/heads/master@{#35147}
Migrate Math.ceil, Math.round and Math.trunc to TurboFan code stubs,
similar to what we did with Math.floor, and make these builtins properly
optimizable in TurboFan via appropriate simplified operators NumberCeil,
NumberRound and NumberTrunc, which are intended to be reusable for
ToInteger and ToLength optimizations that will be done in a followup CL.
Also allows us to kill the funky %RoundNumber runtime function, which
was quite heavy.
Improve test coverage for Math.ceil and Math.trunc a lot, especially
making sure that we also properly trigger the TurboFan builtin reducer
case.
R=jarin@chromium.org
BUG=v8:4059
LOG=n
Review URL: https://codereview.chromium.org/1841993002
Cr-Commit-Position: refs/heads/master@{#35135}
Int64Mul is lowered to a new turbofan operator, Int32MulPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the multiplication.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1807273002
Cr-Commit-Position: refs/heads/master@{#35131}
The new implementation deals with cycles in the TF graph in two steps:
1) The lowering of phis is delayed to avoid cyclic dependencies.
2) The replacement nodes of phis are created already when the phi is
pushed onto the stack so that other nodes can use these replacements
for their lowering.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1844553002
Cr-Commit-Position: refs/heads/master@{#35126}
This avoids redundant casts, loss of precision, and potential overflows.
BUG=chromium:597310
LOG=NO
Review URL: https://codereview.chromium.org/1841043002
Cr-Commit-Position: refs/heads/master@{#35113}
Now instead of saving all event details in the ring buffer,
we save only the bytes and duration.
This reduces the GCTracer size from 20K to 3K and simplifies code.
BUG=chromium:597310
LOG=NO
Review URL: https://codereview.chromium.org/1830723004
Cr-Commit-Position: refs/heads/master@{#35104}
In JavaScript code and stubs, JSSP mirrors the CSP but may be unaligned.
But in WASM code only CSP is used, like native code, and it must be
aligned.
Calls into WASM from JS need to carefully align the C stack
pointer (csp) and restore the previous JSSP, while calls from WASM
to JS need to compute a new JSSP and restore their CSP after the
call.
R=ahaas@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1811283003
Cr-Commit-Position: refs/heads/master@{#35096}
This way we avoid the second deoptimization for the Math.floor and
Math.ceil builtins when -0 is involved. We still deoptimize the inlined
Crankshaft version in various cases, that's a separate issue.
The algorithm used for implement CodeStubAssembler::Float64Floor is
vaguely based on the fast math version used in the libm of various BSDs,
but had to be reengineered to match the EcmaScript specification.
R=epertoso@chromium.org
BUG=v8:2890, v8:4059
LOG=n
Review URL: https://codereview.chromium.org/1828253002
Cr-Commit-Position: refs/heads/master@{#35083}
It's been on since M49. Also moved tests from harmony -> es6,
one of which was merged with another test of the same name.
While moving stuff over to regexp.js, I also noticed that there
were unused calls to %FunctionSetName and %SetNativeFlag (those
calls are already handled by InstallGetter()).
Review URL: https://codereview.chromium.org/1838563003
Cr-Commit-Position: refs/heads/master@{#35076}
Use macro instructions for min, max ops to get the same functionality on
pre-r6 and r6 targets.
BUG=
TEST=mjsunit/math-min-max, cctest/test-macro-assembler-mips64/min_max_nan, cctest/test-macro-assembler-mips/min_max_nan, cctest/test-assembler-mips64/min_max, cctest/test-assembler-mips/min_max
Review URL: https://codereview.chromium.org/1694833002
Cr-Commit-Position: refs/heads/master@{#35073}
A bug in error printing meant that we failed to do proper type checks
before calling into C++ code, which could lead to RUNTIME_ASSERT
failures if methods are called on alternative receivers. This patch
adds the right type checks.
BUG=chromium:596718
LOG=Y
R=adamk
Review URL: https://codereview.chromium.org/1831053003
Cr-Commit-Position: refs/heads/master@{#35069}
This patch implements ES2015 RegExp subclassing semantics, namely the
hardest part where RegExp.prototype.exec and certain flag getters can
be overridden in order to provide different behavior. This change is
hidden behind a new flag, --harmony-regexp-exec. The flag guards the
behavior by installing entirely different implementations of the
methods which follow the new semantics.
Preliminary performance tests show a 3-4x regression in the Octane
RegExp benchmark. The new code doesn't call out into several fast
paths that the old code supported, so this is expected.
The patch is tested mostly by test262, where most RegExp tests are fixed,
with the exception of deliberate spec violations for web compatibility,
and for the 'sticky' flag, which is not dynamically read by this patch
in all cases but rather statically compiled into the RegExp. The latter
will require a follow-on patch to implement. A small additional set of
tests verifies one particular case, mostly to check whether the flag
mechanism works.
R=adamk,yangguo@chromium.org
LOG=Y
BUG=v8:4602
Review URL: https://codereview.chromium.org/1596483005
Cr-Commit-Position: refs/heads/master@{#35068}
Makes --ignition cause eager compilation if we aren't building the startup
snapshot.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1811553003
Cr-Commit-Position: refs/heads/master@{#35066}
Reason for revert:
Makes nosnap bots timeout due to having to rebuild bytecode handlers.
Original issue's description:
> [Interpreter] Remove separate Ignition snapshot.
>
> Removes the seperate Ignition snapshot and build the Ignition bytecode
> handlers in the default snapshot.
>
> BUG=v8:4280
> LOG=N
>
> Committed: https://crrev.com/1798f3fe84faff32ba44e09f6aed79245dd98d80
> Cr-Commit-Position: refs/heads/master@{#35058}
TBR=machenbach@google.com,yangguo@chromium.org,mstarzinger@chromium.org,machenbach@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review URL: https://codereview.chromium.org/1827143002
Cr-Commit-Position: refs/heads/master@{#35059}
Removes the seperate Ignition snapshot and build the Ignition bytecode
handlers in the default snapshot.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1833643002
Cr-Commit-Position: refs/heads/master@{#35058}
Introduce TruncateTaggedToFloat64 and TruncateTaggedToWord32 into the
CodeStubAssembler, which encapsulates the ToNumber truncation and
returns the resulting number as either Float64 or further truncated to
Word32.
R=jarin@chromium.org
BUG=v8:4587
LOG=n
Review URL: https://codereview.chromium.org/1827813004
Cr-Commit-Position: refs/heads/master@{#35051}
ES#sec-islabelledfunction specifies that labelled function declarations
may not occur as the body of a control flow construct such as an if
statement. This patch implements those restrictions, which also
eliminates a previous case resulting in a DCHECK failure which is now
a SyntaxError.
BUG=chromium:595309
R=adamk
LOG=Y
Review URL: https://codereview.chromium.org/1808373003
Cr-Commit-Position: refs/heads/master@{#35049}
This CL adds an extra pass before calculating the special RPO
order in the custom RawMachineAssembler pipeline that
walks through the schedule and inserts extra blocks to
guarantee that the control flow graph is in split edge form. It
also propagates deferred block marks forward to these new
blocks if appropriate.
Review URL: https://codereview.chromium.org/1811333002
Cr-Commit-Position: refs/heads/master@{#35014}
