Mark slow tests discovered by manual audit of reported durations.
Slow tests will run first, which will lead to higher test runner throughput.
Also some tests have flaky timeouts occasionally.
BUG=chromium:601468
Change-Id: If9aeb5422e79ff25b867b01c50386a5fdebeb494
Reviewed-on: https://chromium-review.googlesource.com/455736
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43819}
This makes it possible to directly request testing noturbofan_stress on the command line.
BUG=chromium:682617
TBR=mstarzinger@chromium.org,mvstanton@chromium.org,rmcilroy@chromium.org
NOTRY=true
Change-Id: I6ba9a022c4ef24fb5abe6878d3f2f972e8461eb8
Reviewed-on: https://chromium-review.googlesource.com/453180
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43748}
The switch statement itself is part of the switch block.
However, the source position of the statement is outside of
the block. This leads to confusion for the debugger, if the
switch block pushes a block context: the current context is
a block context, but the scope analysis based on the current
source position tells the debugger that we should be outside
the scope, so we should have the function context.
R=marja@chromium.org
BUG=v8:6085
Review-Url: https://codereview.chromium.org/2744213003
Cr-Commit-Position: refs/heads/master@{#43744}
This fixes the catch predictions for the following builtins --
AsyncFunctionAwaitCaught
AsyncFunctionAwaitUncaught
PromiseResolveClosure
ResolvePromise
PromiseResolve
Added tests for each.
Added whitelist for builtins behind a flag.
BUG=chromium:691875
Change-Id: I816cafdb69f0c9f1eefc440a0a44c36713d0b7dc
Reviewed-on: https://chromium-review.googlesource.com/450894
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43725}
Once we enabled --turbo by default we need to turn all the implications
off with --no-turbo as well. Chrome sets flags in V8 using SetFlagFromString,
which enforces the implications each time it is called. Therefore, if --turbo
is enabled by default, and an unrelated flag is set, the turbo implications are
enabled but not later disabled if we set --no-turbo. To fix this, add negative
implications as well.
BUG=chromium:692409
Change-Id: Iadb0ca542f49ba65c7419cda8c7a03636a8d5ba9
Reviewed-on: https://chromium-review.googlesource.com/451320
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43655}
Map OOM breaks generated by inspector to DebugEvent.OOM.
This avoids generating unintentional DebugEvent.Break events.
Also be more future-proof in event categorization.
On a related note, this CL also fixes a DCHECK in
Runtime::GetFrameDetails.
The receiver needs to be grabbed from the inlined frame, not
the outer optimized frame. Optimized frames only provide the
receiver on a best-effort basis.
BUG=v8:5950
Review-Url: https://codereview.chromium.org/2696173002
Cr-Commit-Position: refs/heads/master@{#43244}
This introduces new maps to track whether we have created at most one
closure. If we have created just one closure, Turbofan will
specialize the code to its context.
Review-Url: https://codereview.chromium.org/2680313002
Cr-Commit-Position: refs/heads/master@{#43108}
Collect code coverage from the available invocation counts.
The granularity is at function level, and invocation counts may
be lost to GC.
Coverage::Collect returns a std::vector of Coverage::ScriptData.
Each ScriptData contains a script ID and a std::vector of
Coverage::RangeEntry.
Each RangeEntry consists of a end position and the invocation
count. The start position is implicit from the end position of
the previous RangeEntry, or 0 if it's the first RangeEntry.
R=jgruber@chromium.org
BUG=v8:5808
Review-Url: https://codereview.chromium.org/2689493002
Cr-Commit-Position: refs/heads/master@{#43072}
- Remove obsolete BreakLocatorType.
- Perform PrepareStepOnThrow after OnException event, in case stepping
was scheduled in the exception event.
- Use frame count instead of frame pointer for stepping. Frame pointer
is not reliable due to possible deopts.
- Consistently check for inlined functions in inlined frames.
- Use SharedFunctionInfo in FloodWithOneshot and EnsureDebugInfo.
R=jgruber@chromium.org
BUG=v8:5901
Review-Url: https://codereview.chromium.org/2664793002
Cr-Commit-Position: refs/heads/master@{#42878}
The mentioned asserts did not work properly with interpreted and turbofanned functions.
To fix this issue %GetOptimizationStatus() now returns a set of flags instead of a single value.
This CL also adds more helper functions to mjsunit, like isNeverOptimize(), isAlwaysOptimize(),
isOptimized(fun), etc.
BUG=v8:5890
Review-Url: https://codereview.chromium.org/2654733004
Cr-Original-Commit-Position: refs/heads/master@{#42703}
Committed: d1ddec7857
Review-Url: https://codereview.chromium.org/2654733004
Cr-Commit-Position: refs/heads/master@{#42731}
Previously, when restarting a frame, we would rewrite all frames
between the debugger activation and the frame to restart to squash
them, and replace the return address with that of a builtin to
leave that rewritten frame, and restart the function by calling it.
We now simply remember the frame to drop to, and upon returning
from the debugger, we check whether to drop the frame, load the
new FP, and restart the function.
R=jgruber@chromium.org, mstarzinger@chromium.org
BUG=v8:5587
Review-Url: https://codereview.chromium.org/2636913002
Cr-Commit-Position: refs/heads/master@{#42725}
This CL adds --crankshaft and --no-always-opt flags to the tests that use
assertOptimized() and assertUnoptimized() respectively.
This CL also adds presubmit checks that ensure that tests have the proper
flags set.
BUG=v8:5890
Review-Url: https://codereview.chromium.org/2653753007
Cr-Commit-Position: refs/heads/master@{#42709}
The mentioned asserts did not work properly with interpreted and turbofanned functions.
To fix this issue %GetOptimizationStatus() now returns a set of flags instead of a single value.
This CL also adds more helper functions to mjsunit, like isNeverOptimize(), isAlwaysOptimize(),
isOptimized(fun), etc.
BUG=v8:5890
Review-Url: https://codereview.chromium.org/2654733004
Cr-Commit-Position: refs/heads/master@{#42703}
Enable enqueueing of eager inner function compilation onto the compiler
dispatcher. This enables these tasks to be performed in parallel to
compilation of the outer functio (only for Ignition functions).
We currently synchronize to ensure all inner function compilations
are complete before executing the outer function - future work will
allow outer function execution to happenin parallel to inner function
compilation.
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2611313002
Cr-Commit-Position: refs/heads/master@{#42667}
Update string-capitalize expected result because now it
passes all the tests in the file.
Mark fast/js/string-capitalization as failing with no_i18n.
Relanding after revert because the failure was taken care of
by Adam's CL at https://codereview.chromium.org/2597543002 .
3rd langing after a crash is taken care of in
https://codereview.chromium.org/2621393002
In addition to the previous version of this CL (PS #4) that landed and
reverted, drop String.prototype.to(Locale){Upper,Lower}Case from the
whitelist of built-in functions for side-effect-free-debugging.
BUG=v8:4477, v8:4476
TEST=test262/{built-ins,intl402}/Strings/*, webkit/fast/js/*,
mjsunit/string-case, intl/general/case*
Cr-Original-Original-Commit-Position: refs/heads/master@{#41834}
Committed: 7c79e23c34
Review-Url: https://codereview.chromium.org/2588963002
Cr-Original-Commit-Position: refs/heads/master@{#41883}
Committed: a42c8c67de
Review-Url: https://codereview.chromium.org/2588963002
Cr-Commit-Position: refs/heads/master@{#42524}
Enable enqueueing of eager inner function compilation onto the compiler
dispatcher. This enables these tasks to be performed in parallel to
compilation of the outer functio (only for Ignition functions).
We currently synchronize to ensure all inner function compilations
are complete before executing the outer function - future work will
allow outer function execution to happenin parallel to inner function
compilation.
BUG=v8:5203,v8:5215
Review-Url: https://codereview.chromium.org/2611313002
Cr-Commit-Position: refs/heads/master@{#42413}
Reason for revert:
OK, the failure really does seem to be due to this patch: It triggers Clang to crash
FAILED: obj/test/unittests/unittests/function-body-decoder-unittest.obj
E:\b\build\slave\cache\cipd\goma/gomacc.exe ../../third_party/llvm-build/Release+Asserts/bin/clang-cl.exe /nologo /showIncludes /FC @obj/test/unittests/unittests/function-body-decoder-unittest.obj.rsp /c ../../test/unittests/wasm/function-body-decoder-unittest.cc /Foobj/test/unittests/unittests/function-body-decoder-unittest.obj /Fd"obj/test/unittests/unittests_cc.pdb"
Assertion failed: (NumGaps == 0 || Bias < MaxDefRange) && "large ranges should not have gaps", file E:\b\build\slave\win_upload_clang\build\src\third_party\llvm\lib\MC\MCCodeView.cpp, line 531
Wrote crash dump file "C:\Users\CHROME~2\AppData\Local\Temp\goma_temp.5068\clang-cl.exe-563144.dmp"
Let's leave it out for now.
Original issue's description:
> Reland of [wasm] Enforce that function bodies end with the \"end\" opcode. (patchset #1 id:1 of https://codereview.chromium.org/2628883006/ )
>
> Reason for revert:
> Try a reland; this might not have been the source of tree-closing.
>
> Original issue's description:
> > Revert of [wasm] Enforce that function bodies end with the \"end\" opcode. (patchset #3 id:40001 of https://codereview.chromium.org/2630553002/ )
> >
> > Reason for revert:
> > Caused tree to close by failing compilation:
> >
> > https://build.chromium.org/p/client.v8/builders/V8%20Win64%20-%20clang/builds/4451
> >
> > Original issue's description:
> > > [wasm] Enforce that function bodies end with the \"end\" opcode.
> > >
> > > R=rossberg@chromium.org
> > > BUG=chromium:575167
> > >
> > > Review-Url: https://codereview.chromium.org/2630553002
> > > Cr-Commit-Position: refs/heads/master@{#42286}
> > > Committed: fcc6e85ec6
> >
> > TBR=mtrofin@chromium.org,rossberg@chromium.org,jbroman@chromium.org,titzer@chromium.org
> > # Skipping CQ checks because original CL landed less than 1 days ago.
> > NOPRESUBMIT=true
> > NOTREECHECKS=true
> > NOTRY=true
> > BUG=chromium:575167
> >
> > Review-Url: https://codereview.chromium.org/2628883006
> > Cr-Commit-Position: refs/heads/master@{#42287}
> > Committed: 1d32a3989b
>
> TBR=mtrofin@chromium.org,rossberg@chromium.org,jbroman@chromium.org,titzer@chromium.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=chromium:575167
>
> Review-Url: https://codereview.chromium.org/2628203003
> Cr-Commit-Position: refs/heads/master@{#42296}
> Committed: e539bd8e0eTBR=mtrofin@chromium.org,rossberg@chromium.org,jbroman@chromium.org,titzer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:575167
Review-Url: https://codereview.chromium.org/2633583002
Cr-Commit-Position: refs/heads/master@{#42298}
Reason for revert:
Try a reland; this might not have been the source of tree-closing.
Original issue's description:
> Revert of [wasm] Enforce that function bodies end with the \"end\" opcode. (patchset #3 id:40001 of https://codereview.chromium.org/2630553002/ )
>
> Reason for revert:
> Caused tree to close by failing compilation:
>
> https://build.chromium.org/p/client.v8/builders/V8%20Win64%20-%20clang/builds/4451
>
> Original issue's description:
> > [wasm] Enforce that function bodies end with the \"end\" opcode.
> >
> > R=rossberg@chromium.org
> > BUG=chromium:575167
> >
> > Review-Url: https://codereview.chromium.org/2630553002
> > Cr-Commit-Position: refs/heads/master@{#42286}
> > Committed: fcc6e85ec6
>
> TBR=mtrofin@chromium.org,rossberg@chromium.org,jbroman@chromium.org,titzer@chromium.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=chromium:575167
>
> Review-Url: https://codereview.chromium.org/2628883006
> Cr-Commit-Position: refs/heads/master@{#42287}
> Committed: 1d32a3989bTBR=mtrofin@chromium.org,rossberg@chromium.org,jbroman@chromium.org,titzer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:575167
Review-Url: https://codereview.chromium.org/2628203003
Cr-Commit-Position: refs/heads/master@{#42296}
The inspector cannot deal with breaking inside of debug-evaluate.
There is therefore no point in supporting that in the debugger.
The optional additional context parameter for debug-evaluate also
can be removed since it's not being used.
R=jgruber@chromium.org
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2580323002
Cr-Commit-Position: refs/heads/master@{#41791}
--asan test config passes --omit-quit which breaks this test on
failure.
Review-Url: https://codereview.chromium.org/2546093002
Cr-Commit-Position: refs/heads/master@{#41627}
Debugging API is still in use by Node.
Revert "[debug] remove deprecated debug command message queue."
This reverts commit abdbfc953d.
Revert "[debug] mark more unused debug API as deprecated."
This reverts commit d5ada19ce7.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2537313005
Cr-Commit-Position: refs/heads/master@{#41427}
Replaces the graph-based liveness analyzer in the bytecode graph builder
with an initial bytecode-based liveness analysis pass, which is added to
the existing loop extent analysis.
Now the StateValues in the graph have their inputs initialised to
optimized_out, rather than being modified after the graph is built.
Review-Url: https://codereview.chromium.org/2523893003
Cr-Commit-Position: refs/heads/master@{#41355}
Reason for revert:
Breaks the build:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20shared/builds/14886
Original issue's description:
> [ignition/turbo] Perform liveness analysis on the bytecodes
>
> Replaces the graph-based liveness analyzer in the bytecode graph builder
> with an initial bytecode-based liveness analysis pass, which is added to
> the existing loop extent analysis.
>
> Now the StateValues in the graph have their inputs initialised to
> optimized_out, rather than being modified after the graph is built.
>
> Committed: https://crrev.com/1852300954c216c29cf93444430681d213e87925
> Cr-Commit-Position: refs/heads/master@{#41344}
TBR=jarin@chromium.org,rmcilroy@chromium.org,yangguo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/2541443002
Cr-Commit-Position: refs/heads/master@{#41346}
Replaces the graph-based liveness analyzer in the bytecode graph builder
with an initial bytecode-based liveness analysis pass, which is added to
the existing loop extent analysis.
Now the StateValues in the graph have their inputs initialised to
optimized_out, rather than being modified after the graph is built.
Review-Url: https://codereview.chromium.org/2523893003
Cr-Commit-Position: refs/heads/master@{#41344}
AsyncTaskEvents are not exposed through the inspector interface.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2532693002
Cr-Commit-Position: refs/heads/master@{#41299}
Wasm frames are special in that they have a non-integer script id
in inspector. The way we treat script ids currently is a bit of a mess -
our runtime functions expected integer IDs while inspector has string
IDs (which contain integers, except for Wasm frames). This will need to
be cleaned up once more Wasm tests are added.
The meaning of line/column numbers has also changed; the old JS debug
API encoded the function index and byte offset into line/column numbers,
while inspector-based API actually translates into lines/columns in the
disassembly.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2515133003
Cr-Commit-Position: refs/heads/master@{#41182}
Unfortunately, there's currently no satisfying way of accessing scopes
of suspended generator objects through inspector. This CL implements
access to such scopes through runtime functions instead.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2513343004
Cr-Commit-Position: refs/heads/master@{#41179}
StepFrame is a combination of StepIn/StepOut, e.g. it breaks to the next
frame change. This is not part of the public API, but we want to keep it
for internal tests.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2514303003
Cr-Commit-Position: refs/heads/master@{#41177}
* Fix setting script-scope variables through inspector by internalizing
their names.
* Reconstruct values of Number, String, and Boolean classes.
* Adapt a couple of tests for API restrictions.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2512963002
Cr-Commit-Position: refs/heads/master@{#41175}
Stepping in a generator now behaves similar to stepping inside an
async function. Stepping in or next at a yield expression will result in
a break inside the same generator when we return to the generator.
Behavior of step-out does not change.
R=jgruber@chromium.org, neis@chromium.org
BUG=chromium:496865
Review-Url: https://codereview.chromium.org/2519853002
Cr-Commit-Position: refs/heads/master@{#41132}
Adapted various tests to restrictions of inspector protocol:
* osr-typing-debug-change: Don't set function variable value.
* debug-evaluate-locals: Add variable introduced by eval, run typeof
inside evaluate().
* regress-419663: Don't set duplicate breakpoints.
* regress-crbug-465298: Compare against function name instead of value.
* regress-crbug-621361: Make evaluate return string results.
* debug-script: Various counts were off due to new way tests are called.
Added new inspector script type.
Breakpoints now contain the actual break position, and remote object
reconstruction has been extended a bit.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2505363002
Cr-Commit-Position: refs/heads/master@{#41129}
With this change, WebAssembly.Memory objects have backing stores allocated as an
8GB region where everything beyond the size of the Wasm heap is inaccessible.
GrowMemory is now implemented by changing the protection on the guard regions to
make the new portions of the heap accessible.
Guard pages are not enabled by default, but this change adds a flag and a test
variant to make sure we get test coverage on them.
BUG= https://bugs.chromium.org/p/v8/issues/detail?id=5277
Review-Url: https://codereview.chromium.org/2396433008
Cr-Commit-Position: refs/heads/master@{#41089}
This adds clearAllBreakPoints functionality (which requires tracking set
breakpoints internally), and several script-related functions that rely
on runtime functions.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2508853003
Cr-Commit-Position: refs/heads/master@{#41064}
This adds access to the LiveEdit API object, frame.restart(), and
various breakpoint setters. The LiveEdit API still depends on the JS
debugging context and blocks its removal; but it should be removed
once LiveEdit is rewritten in the midterm.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2503293002
Cr-Commit-Position: refs/heads/master@{#41062}
This CL further extends the debug wrapper, migrates around 60 tests, and
removes a few tests that use functionality we will not support anymore.
In more detail:
* Removed tests that use:
* enable/disable individual breakpoints
* invocationText()
* the ScriptCollected event
* showBreakPoints
* evalFromScript (and similar)
* mirror.constructedBy and mirror.referencedBy
* event_data.promise()
* Some frame.evaluate uses were adapted since due to differences between
remote objects (inspector) and mirrors. For instance, exceptions are
currently not recreated exactly, since the inspector protocol does not
give us the stack and message separately. Other objects (such as
'this' in debug-evaluate-receiver-before-super) need to be explicitly
converted to a string before the test works correctly.
* Ensure that inspector stores the script before sending ScriptParsed and
ScriptFailedToParse events in order to be able to use the script from
within those events.
* Better remote object reconstruction (e.g. for undefined and arrays).
* New functionality in wrapper:
* debuggerFlags().breakPointsActive.setValue()
* scripts()
* execState.setVariableValue()
* execState.scopeObject().value()
* execState.scopeObject().property()
* execState.frame().allScopes()
* eventData.exception()
* eventData.script()
* setBreakPointsActive()
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2497973002
Cr-Commit-Position: refs/heads/master@{#41019}
GetSharedFunctionInfo will compile inner functions if we get the
compile-eager hint, even if the shared function info already exists, and
the function already has been compiled. This breaks suspended generator
objects.
R=mstarzinger@chromium.org, neis@chromium.org
BUG=v8:5575
Review-Url: https://codereview.chromium.org/2494043002
Cr-Commit-Position: refs/heads/master@{#40936}
This CL adds support for:
* conditional breaks in setBreakpoint,
* locals in frame.local{Count,Name,Value},
* evaluation on a frame in frame.evaluate,
* and more detailed scope information in scopeObject.
Uses of several functions that are not covered by the
inspector protocol and are only used in tests have been removed.
Local handling has been modified to also include arguments as locals.
Inspector differs in this regard from our FrameDetails in that
arguments are always shown as locals. Argument-related functions
were removed.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2491543002
Cr-Commit-Position: refs/heads/master@{#40917}
This changes {FrameState} nodes modeling "after" states to use bytecode
offsets pointing to the deoptimizing bytecode. This is in sync with the
normal execution, as the bytecode offset is advanced after operations
complete in regular bytecode handlers.
The change is necessary to ensure lazy deoptimized frames contain an
accurate bytecode offset while they are on the stack. Such frames can be
inspected by various stack walks. The continuation builtin will advance
the bytecode offset upon return.
R=jarin@chromium.org
TEST=mjsunit/regress/regress-crbug-660379
BUG=chromium:660379
Review-Url: https://codereview.chromium.org/2487173002
Cr-Commit-Position: refs/heads/master@{#40887}
We cannot generate debug events if JS execution is disallowed since
vital debugging logic is still implemented in JS. Return early from
Debug::OnException if that is the case.
BUG=chromium:662674
Review-Url: https://codereview.chromium.org/2491443002
Cr-Commit-Position: refs/heads/master@{#40858}
This adds clearStepping plus the family of
{set,clear}BreakOn{,Uncaught}Exception functions.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2482903002
Cr-Commit-Position: refs/heads/master@{#40834}
This moves all tests currently working with the inspector debugger wrapper to
test/debugger.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2480223002
Cr-Commit-Position: refs/heads/master@{#40824}
Previously, tests in the newly added test/debugger/debug directory were
not executed on CQ.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2484713002
Cr-Commit-Position: refs/heads/master@{#40819}
This moves all tests currently working with the inspector debugger wrapper to
test/debugger.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2480223002
Cr-Commit-Position: refs/heads/master@{#40804}
This CL adds further support to the test wrapper. We are now able to
run almost all mjsunit/debug-step-* tests using the inspector backend.
debug-stepframe-* tests are not yet supported since inspector does not
know a 'frame' step type.
The interface has also been improved to be able to move these tests to
inspector mostly without modification.
BUG=v8:5330
Review-Url: https://codereview.chromium.org/2466273005
Cr-Commit-Position: refs/heads/master@{#40800}
This CL adds simple implementation of break and stepping-related functionality
as required by the debug-step.js test. This includes
* stepOver, stepInto, stepOut
* setBreakPoint
* clearBreakPoint
* evaluate
Some of these, e.g. setBreakPoint are not fully implemented for all cases but
only for the ones we need right now.
One interesting result of this is that using the inspector protocol is roughly
14x slower for debug-step.js (14s instead of 0.5s). One cause of this seems to
be iteration over all object properties in toProtocolValue, which is used to
serialize JS objects before being sent over the wire (e.g. FrameMirrors). This
is something that should be fixed at some point. In the meantime, the test now
runs 100 instead of 1000 iterations.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2447073007
Cr-Commit-Position: refs/heads/master@{#40636}
This adds a wrapper class around the inspector protocol for use in
debugger tests. The interface is intended to stay similar to the
currently exposed DebuggerContext.
Right now, we support adding a listener, (partial) handling of the
AfterCompile event, and enabling/disabling the debugger.
BUG=v8:5530
Review-Url: https://codereview.chromium.org/2451153003
Cr-Commit-Position: refs/heads/master@{#40635}
