...based on the 2-lock algorithm by M. Scott and M. Michael (1992).
BUG=chromium:524425
LOG=N
Review URL: https://codereview.chromium.org/1448283004
Cr-Commit-Position: refs/heads/master@{#32078}
This change binds each {Cancelable} task to a so-called {CancelableTaskManager},
which is then used to handle concurrent cancelation as well as synchronizing
shutdown for already running tasks. Since ownership of tasks is transferred to
the platform executing a task (destructor), handling in the manager uses integer
ids. Note that this also mitigates (modulo integer size) the ABA problem.
All handling of {Cancelable} tasks is now encapsulated into the corresponding
manager, which is instantiated for each isolate.
R=hpayer@chromium.org
BUG=chromium:524425
LOG=N
CQ_EXTRA_TRYBOTS=tryserver.v8:v8_linux_arm64_gc_stress_dbg;tryserver.v8:v8_linux_gc_stress_dbg;tryserver.v8:v8_mac_gc_stress_dbg;tryserver.v8:v8_linux64_msan_rel;tryserver.v8:v8_linux64_tsan_rel;tryserver.v8:v8_mac64_asan_rel
Review URL: https://codereview.chromium.org/1409993012
Cr-Commit-Position: refs/heads/master@{#31997}
Both the JSTypeFeedbackSpecializer and the JSTypeFeedbackLowering is
dead code by now, since the more general JSNativeContextSpecialization
deals with the property/global load/store type feedback in a way that
also interacts properly with inlining.
BUG=v8:4470
LOG=n
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1407913003 .
Cr-Commit-Position: refs/heads/master@{#31462}
Removes a branch that checks for a condition that has been checked on dominators of the branch.
This introduces a new reducer that propagates the list of checked conditions (and their boolean values) through the control flow graph. If it encounters a branch checking a condition with a known value, the branch is eliminated.
The analysis relies on loops being reducible: if a condition has been checked on all paths to loop entry, then it is checked in the loop (regardless what of the conditions checked inside the loop).
The implementation is fairly naive and could be improved:
- all the operation on the condition lists could be made allocation-free when revisited.
- we could try to use a map structure rather than a linked list (to make
lookups faster).
- the merging of control flow could be changed to take into account
conditions from non-dominating paths (as long as all paths check
the condition).
Review URL: https://codereview.chromium.org/1376293005
Cr-Commit-Position: refs/heads/master@{#31347}
Reason for revert:
Prime suspect in breakage of V8 Linux -- no snap
Original issue's description:
> [swarming] Isolate v8 testing.
>
> Add gyp support and isolates for default test suites.
> Add two default isolates, one (default) for using the
> test suite collection we call "default" on the bots. One
> (developer_default) for also supporting the way developers
> call the driver (i.e. without argument, which includes
> the unittests).
>
> BUG=chromium:535160
> LOG=n
>
> Committed: https://crrev.com/9bd83f58f29ab0c7c5b71b00bcb1df3a9e641f05
> Cr-Commit-Position: refs/heads/master@{#31081}
TBR=tandrii@chromium.org,jochen@chromium.org,maruel@chromium.org,machenbach@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:535160
Review URL: https://codereview.chromium.org/1370993008
Cr-Commit-Position: refs/heads/master@{#31084}
Add gyp support and isolates for default test suites.
Add two default isolates, one (default) for using the
test suite collection we call "default" on the bots. One
(developer_default) for also supporting the way developers
call the driver (i.e. without argument, which includes
the unittests).
BUG=chromium:535160
LOG=n
Review URL: https://codereview.chromium.org/1380593002
Cr-Commit-Position: refs/heads/master@{#31081}
The comparison operators and ToBoolean are implemented by calling into
the runtime. There are new runtime methods are prefixed with Interpreter
to make use case clear.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1369123002
Cr-Commit-Position: refs/heads/master@{#30983}
Add methods for converting parameter index to a register and vice-versa.
Move Register class into bytecodes.h.
Update Bytecodes::Decode to pretty print parameters.
BUG=v8:4280
LOG=NO
Review URL: https://codereview.chromium.org/1325983002
Cr-Commit-Position: refs/heads/master@{#30549}
- Make the API look like v8::V8::InitializeICU.
(That is: A static method call, not an object to be created on the stack.)
- Fix path separator on Windows, by calling base::OS::isPathSeparator.
- Move into API, so that it can be called by hello-world & friends.
- Actually call it from hello-world and friends.
R=jochen@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1292053002
Cr-Commit-Position: refs/heads/master@{#30174}
Modifies the BytecodeArrayBuilder to create register operands which are
negative. This reduces the number of instructions to access registers
by the interpreter and allows us to use positive register operands to
access parameter values.
Adds a Register class to keep register usage typesafe and simplify the
convertion to bytecode operand values.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1283313003
Cr-Commit-Position: refs/heads/master@{#30151}
Adds basic support for generation of interpreter bytecode handler code
snippets. The InterpreterAssembler class exposes a set of low level,
interpreter specific operations which can be used to build a Turbofan
graph. The Interpreter class generates a bytecode handler snippet for
each bytecode by assembling operations using an InterpreterAssembler.
Currently only two simple bytecodes are supported: LoadLiteral0 and Return.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1239793002
Cr-Commit-Position: refs/heads/master@{#29814}
Consolidated conflict detection and traversal logic in CoalescedLiveRanges to avoid duplication in both code and testing. In addition, this change achieves better separation between CoalescedLiveRanges and other register allocator components, improving testability and maintainability.
BUG=
Review URL: https://codereview.chromium.org/1219063017
Cr-Commit-Position: refs/heads/master@{#29783}
In many cases, the context that TurboFan's ASTGraphBuilder or subsequent
reduction operations attaches to nodes does not need to be that exact
context, but rather only needs to be one with the same native context,
because it is used internally only to fetch the native context, e.g. for
creating and throwing exceptions.
This reducer recognizes common cases where the context that is specified
for a node can be relaxed to a canonical, less specific one. This
relaxed context can either be the enclosing function's context or a specific
Module or Script context that is explicitly created within the function.
This optimization is especially important for TurboFan-generated code stubs
which use context specialization and inlining to generate optimal code.
Without context relaxation, many extraneous moves are generated to pass
exactly the right context to internal functions like ToNumber and
AllocateHeapNumber, which only need the native context. By turning context
relaxation on, these moves disappear because all these common internal
context uses are unified to the context passed into the stub function, which
is typically already in the correct context register and remains there for
short stubs. It also eliminates the explicit use of a specialized context
constant in the code stub in these cases, which could cause memory leaks.
Review URL: https://codereview.chromium.org/1244583003
Cr-Commit-Position: refs/heads/master@{#29763}
The RawMachineAssembler will be used to build the interpreter, so it needs
to move back to src/compiler.
This reverts commit b5b00cc031.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1221303014
Cr-Commit-Position: refs/heads/master@{#29519}
The three different concerns that the ControlReducer used to deal with
are now properly separated into
a.) DeadCodeElimination, which is a regular AdvancedReducer, that
propagates Dead via control edges,
b.) CommonOperatorReducer, which does strength reduction on common
operators (i.e. Branch, Phi, and friends), and
c.) GraphTrimming, which removes dead->live edges from the graph.
This will make it possible to run the DeadCodeElimination together with
other passes that actually introduce Dead nodes, i.e. typed lowering;
and it opens the door for general inlining without two stage fix point
iteration.
To make the DeadCodeElimination easier and more uniform, we basically
reverted the introduction of DeadValue and DeadEffect, and changed the
Dead operator to produce control, value and effect. Note however that
this is not a requirement, but merely a way to make dead propagation
easier and more uniform. We could always go back and decide to have
different Dead operators if some other change requires that.
Note that there are several additional opportunities for cleanup now,
i.e. OSR deconstruction could be a regular reducer now, and we don't
need to use TheHole as dead value marker in the GraphReducer. And we can
actually run the dead code elimination together with the other passes
instead of using separate passes over the graph. We will do this in
follow up CLs.
R=jarin@chromium.org, mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1193833002
Cr-Commit-Position: refs/heads/master@{#29146}
Up until now that was still mixed with control reduction in the
ControlReducer. This separation allows us to remove the horrible
Reducer::Finish hack and also do graph trimming at more appropriate
places in the pipeline (i.e. trim dead nodes after generic lowering,
which can also make nodes dead).
R=jarin@chromium.org,mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1188433010
Cr-Commit-Position: refs/heads/master@{#29077}
The SimplifiedOperatorReducer is (mostly) unused, except for the very
rough store elimination, and just eats compilation time.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1162563002
Cr-Commit-Position: refs/heads/master@{#28673}
This introduces V8.MemoryHeapCommitted and V8.MemoryHeapUsed histograms.
In contrast to the existing memory histograms, the new histograms are uniform in time, i.e. their samples happen at regular time intervals. The --histogram-interval specifies the length of the interval.
We implement this by linearly interpolating memory stats between GC and idle notification events.
BUG=chromium:485472
LOG=NO
Review URL: https://codereview.chromium.org/1125683004
Cr-Commit-Position: refs/heads/master@{#28292}
An AdvancedReducer is basically a regular Reducer with an editor
that can perform graph editing operations beyond changing or
replacing the node that is currently being reduced. The GraphReducer
is the default implementation of the AdvancedReducer::Editor interface.
The ControlReducerImpl is now just an AdvancedReducer, which
temporarily requires a Finish method in the reducer to implement
the dead node trimming until we move that to the GraphReducer
(which in turn requires that all loops are connected to End).
Review URL: https://codereview.chromium.org/1122423003
Cr-Commit-Position: refs/heads/master@{#28251}
Tail calls are matched on the graph, with a dedicated tail call
optimization that is actually testable. The instruction selection can
still fall back to a regular if the platform constraints don't allow to
emit a tail call (i.e. the return locations of caller and callee differ
or the callee takes non-register parameters, which is a restriction that
will be removed in the future).
Also explicitly limit tail call optimization to stubs for now and drop
the global flag.
BUG=v8:4076
LOG=n
Review URL: https://codereview.chromium.org/1114163005
Cr-Commit-Position: refs/heads/master@{#28219}
This prepares for re-landing crrev.com/956373002
This pulls all decision about the snapshot [no|internal|external] into one rule. Previously, this logic was in separate places and not /quite/ the same, which causes build problems.
BUG=
Review URL: https://codereview.chromium.org/1016603004
Cr-Commit-Position: refs/heads/master@{#27523}
This change introduces a liveness analyzer for local variables in frame states.
The main idea is to use the AstGraphBuilder::Environment class to build the control flow graph, and record local variable loads, stores and checkpoints in the CFG basic blocks (LivenessAnalyzerBlock class).
After the graph building finishes, we run a simple data flow analysis over the CFG to figure out liveness of each local variable at each checkpoint. Finally, we run a pass over all the checkpoints and replace dead local variables in the frame states with the 'undefined' value.
Performance numbers for Embenchen are below.
----------- box2d.js
Current --turbo-deoptimization: EmbenchenBox2d(RunTime): 11265 ms.
d8-master --turbo-deoptimization: EmbenchenBox2d(RunTime): 11768 ms.
d8-master: EmbenchenBox2d(RunTime): 10996 ms.
----------- bullet.js
Current --turbo-deoptimization: EmbenchenBullet(RunTime): 17049 ms.
d8-master --turbo-deoptimization: EmbenchenBullet(RunTime): 17384 ms.
d8-master: EmbenchenBullet(RunTime): 16153 ms.
----------- copy.js
Current --turbo-deoptimization: EmbenchenCopy(RunTime): 4877 ms.
d8-master --turbo-deoptimization: EmbenchenCopy(RunTime): 4938 ms.
d8-master: EmbenchenCopy(RunTime): 4940 ms.
----------- corrections.js
Current --turbo-deoptimization: EmbenchenCorrections(RunTime): 7068 ms.
d8-master --turbo-deoptimization: EmbenchenCorrections(RunTime): 6718 ms.
d8-master: EmbenchenCorrections(RunTime): 6858 ms.
----------- fannkuch.js
Current --turbo-deoptimization: EmbenchenFannkuch(RunTime): 4167 ms.
d8-master --turbo-deoptimization: EmbenchenFannkuch(RunTime): 4608 ms.
d8-master: EmbenchenFannkuch(RunTime): 4149 ms.
----------- fasta.js
Current --turbo-deoptimization: EmbenchenFasta(RunTime): 9981 ms.
d8-master --turbo-deoptimization: EmbenchenFasta(RunTime): 9848 ms.
d8-master: EmbenchenFasta(RunTime): 9640 ms.
----------- lua_binarytrees.js
Current --turbo-deoptimization: EmbenchenLuaBinaryTrees(RunTime): 11571 ms.
d8-master --turbo-deoptimization: EmbenchenLuaBinaryTrees(RunTime): 13089 ms.
d8-master: EmbenchenLuaBinaryTrees(RunTime): 10957 ms.
----------- memops.js
Current --turbo-deoptimization: EmbenchenMemOps(RunTime): 7766 ms.
d8-master --turbo-deoptimization: EmbenchenMemOps(RunTime): 7346 ms.
d8-master: EmbenchenMemOps(RunTime): 7738 ms.
----------- primes.js
Current --turbo-deoptimization: EmbenchenPrimes(RunTime): 7459 ms.
d8-master --turbo-deoptimization: EmbenchenPrimes(RunTime): 7453 ms.
d8-master: EmbenchenPrimes(RunTime): 7451 ms.
----------- skinning.js
Current --turbo-deoptimization: EmbenchenSkinning(RunTime): 15564 ms.
d8-master --turbo-deoptimization: EmbenchenSkinning(RunTime): 15611 ms.
d8-master: EmbenchenSkinning(RunTime): 15583 ms.
----------- zlib.js
Current --turbo-deoptimization: EmbenchenZLib(RunTime): 10825 ms.
d8-master --turbo-deoptimization: EmbenchenZLib(RunTime): 11180 ms.
d8-master: EmbenchenZLib(RunTime): 10823 ms.
BUG=
Review URL: https://codereview.chromium.org/949743002
Cr-Commit-Position: refs/heads/master@{#27232}
Instead of the current approach of storing flat vectors in frame states (and possibly reusing the last vector in AST graph builder), this change list builds a tree for the values and tries to reuse the nodes for different frame states. At the moment, we only use this for the local variable part of frame state, but nothing prevents us from using this for all parts.
This change provides two new classes: one for creating the tree (StateValuesCache) and one for iterating the trees (StateValuesAccess).
BUG=
Review URL: https://codereview.chromium.org/1008213002
Cr-Commit-Position: refs/heads/master@{#27222}
This adds a new ControlFlowOptimizer that - for now - recognizes chains
of Branches generated by the SwitchBuilder for a subset of javascript
switches into Switch nodes. Those Switch nodes are then lowered to
either table or lookup switches.
Also rename Case to IfValue (and introduce IfDefault) for consistency.
BUG=v8:3872
LOG=n
Review URL: https://codereview.chromium.org/931623002
Cr-Commit-Position: refs/heads/master@{#26691}
To do so, extract startup_data_util from d8 and use it those executables.
BUG=
Review URL: https://codereview.chromium.org/913703002
Cr-Commit-Position: refs/heads/master@{#26547}
This reverts commit f578d35ba8 because
(immutable) heap numbers are surprisingly mutable in V8. Someone else
might want to cleanup the mess, otherwise we'll just keep it this way.
TBR=jkummerow@chromium.org
BUG=chromium:454894
LOG=y
Review URL: https://codereview.chromium.org/898973003
Cr-Commit-Position: refs/heads/master@{#26447}
