These operators were only used by the old asm.js pipeline (with
fullcodegen and the AstGraphBuilder). When going through the new
pipeline, accesses to TypedArrays are handled by the native
context specialization during inlining.
Bug: v8:6409
Change-Id: Ib9b888c0b96f297a335580ee42dfa951bde566be
Reviewed-on: https://chromium-review.googlesource.com/612347
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47322}
Deletes AstGraphBuilder and associated classes now that it is
unreachable. The following classes are also removed:
- ControlBuilders
- JSFrameSpecialization
- AstLoopAssignmentAnalysis
Also removes flags from compilation-info which are no longer used, and removes
the no-deoptimization paths from TypedOptimization, JsTypedLowering,
JSIntrinsicLowering and JSBuiltinLowering.
BUG=v8:6409
Change-Id: I63986e8e3497bf63c4a27ea8ae827b8a633d4a26
Reviewed-on: https://chromium-review.googlesource.com/583652
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47284}
This avoid introduction of {TypeGuard} nodes during load elimination.
Such type guard could lead to contradicting type information where a
constant {NumberConstant} node was guarded to have {ExternalPointer}
type, which would lead to an impossible constraint on representation
selection.
R=jarin@chromium.org
TEST=mjsunit/regress/regress-crbug-752826
BUG=chromium:752826
Change-Id: Ida3815af24ccc8a48474b8d66117b9718f61adda
Reviewed-on: https://chromium-review.googlesource.com/605547
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47218}
Currently only A test operators had output, but since ABReducer and BCReducer
perform in-place replacement of A nodes into B nodes, and then sometimes into
C nodes, we need B and C nodes to have as many outputs. Otherwise, we run into
a situation where a node {x} has a use {y}, but its operators has 0 outputs,
which is inconsistent.
Bug:
Change-Id: I0f73b83d2115dfeda3c9cbc97b9a2fc168f4c31b
Reviewed-on: https://chromium-review.googlesource.com/603716
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Alexandre Talon <alexandret@google.com>
Cr-Commit-Position: refs/heads/master@{#47202}
For determining whether unaligned memory accessed is allowed, it is
actually sufficient to pass the MachineRepresentation instead of the
MachineType.
As the MachineRepresentation is an enum, this allows to store the set
of unsupported types as an EnumSet instead of std::vector.
R=mstarzinger@chromium.org
Change-Id: Ibe44717bae3a6034bae683057e80bd40d92e70ae
Reviewed-on: https://chromium-review.googlesource.com/598790
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47123}
The {alignment} parameter in {UnalignedLoadSupported} and
{UnalignedStoreSupported} is never being used.
This CL removes it from several interfaces and users.
R=mstarzinger@chromium.org
Change-Id: Iad5a638b7ed358beeed42f0ea7308dc04f1ed23e
Reviewed-on: https://chromium-review.googlesource.com/598788
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47115}
This removes the obsolete {Crankshaft} factory method as it returns the
same configuration as the {Turbofan} factory by now. We now consistently
use {RegisterConfiguration::Default} everywhere.
R=jkummerow@chromium.org
BUG=v8:6408
Change-Id: I6be25774aa6714ef4dc1ef6856bb6dbc95593a29
Reviewed-on: https://chromium-review.googlesource.com/597858
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47109}
There remained a few of regressions and we didn't see any significant
improvement in the real world with this turned on. This CL reverts all the
StringConcat bytecode work which landed.
BUG=v8:6243
Change-Id: I832eb72e880ad41411dbec8fe29f71ef0f2025c8
Reviewed-on: https://chromium-review.googlesource.com/575130
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46769}
Returning a double from ToFloat64 could lead to problems. If value_ has the bit
representation of a signaling NaN (sNaN), then returning it as double can cause
the signaling bit to flip, and value_ is returned as a quiet NaN (qNaN).
The usage of the Double wrapper also, makes the function ToFloat64AsInt
redundant, since the Double wrapper already has the AsUint64() method,
which returns an uint64_t.
R=ahaas@chromium.org
Change-Id: I1e627b97b2fb6110fc702fe58f2b83eb343e9ca2
Reviewed-on: https://chromium-review.googlesource.com/563215
Commit-Queue: Enrico Bacis <enricobacis@google.com>
Reviewed-by: Martyn Capewell <martyn.capewell@arm.com>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46680}
There is just one version now, called IsPowerOfTwo. It accepts any
integral type.
There is one slight semantical change: Called with kMinInt, it
previously returned true, because the argument was implicitly casted to
an unsigned. It's now (correctly) returning false, so I had to add
special handlings of kMinInt in machine-operator-reducer before calling
IsPowerOfTwo on that value.
R=mlippautz@chromium.org,mstarzinger@chromium.org,jgruber@chromium.org,ishell@chromium.org,yangguo@chromium.org
Change-Id: Idc112a89034cdc8c03365b778b33b1c29fefb38d
Reviewed-on: https://chromium-review.googlesource.com/568140
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46627}
This CL moves collected source range information out of AST nodes
and into a side table stored on ParseInfo. The side table is only
created if block coverage is enabled, so there's almost no memory
overhead in the standard case.
Change-Id: I41871b8425ebbc6217d82d3ad26b5fc9e5d68ecb
Reviewed-on: https://chromium-review.googlesource.com/566808
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46590}
Each reducer now has a virtual reducer_name function, returning its name
(the name of the class containing this reducer). This gets displayed when
using the --trace_turbo_reduction flag. Also when using this flags more
messages are displayed.
Actually when a node is replaced in-place (which is called an update
of the node), other reducers can still update it right after the
in-place replacement. When a node is really replaced (not in-place),
then we stop trying to apply reducers to it before we propagate the
reduction through the relevant nodes.
Before a message got printed only for the last reduction it went
through. So in case a node was reduced in-place several times
in a row, only the last update was printed, or none at all if after
being reduced in-place it got reduced by being replaced by another
node: only the non-in-place replacement was showed.
Now each time an in-place reduction is applied to a node, a message
gets printed.
Bug:
Change-Id: Id0f816fecd44c01d0253966c6decc4861be0c2fa
Reviewed-on: https://chromium-review.googlesource.com/563365
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Alexandre Talon <alexandret@google.com>
Cr-Commit-Position: refs/heads/master@{#46552}
On Loongson 3A, MADD/MSUB instructions are actually fused MADD/MSUB and
they can cause failure in some of the tests. Since this optimization is
rarely used, and not used at all on MIPS64R6, MADD/MSUB instructions
are removed from the source base.
TEST=
BUG=
Change-Id: Ifbb5508a62731bb061f332864ffd1e210e97f963
Reviewed-on: https://chromium-review.googlesource.com/558066
Reviewed-by: Ivica Bogosavljevic <ivica.bogosavljevic@imgtec.com>
Commit-Queue: Ivica Bogosavljevic <ivica.bogosavljevic@imgtec.com>
Cr-Commit-Position: refs/heads/master@{#46387}
With FCG no longer able to deoptimize, we can remove the "push" version
of output frame state combine, as deoptimisation to bytecode is always
the PokeAt variant.
Bug: v8:6409
Change-Id: I9b6d38a7441ca834835615c238228fa8a75a027b
Reviewed-on: https://chromium-review.googlesource.com/557866
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#46355}
This removes support for reconstructing stack frames for full-codegen
from the deoptimizer. We no longer deoptimize to such code. This also
allows us to remove the {DeoptimizationOutputData} data structure.
R=jarin@chromium.org
BUG=v8:6409
Change-Id: Id28ef05aa985b6877b5c91926a7d7d0d6d6e661d
Reviewed-on: https://chromium-review.googlesource.com/535537
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45943}
The AST-based graph builder is by now only used for asm.js code. This
change hard-codes this assumption into the compilation pipeline and
hence allows us to remove support pertaining to deoptimization from
optimized code that was not derived from bytecode.
R=jarin@chromium.org
BUG=v8:6409
Change-Id: I1138f16f663db5b9ee34e3110184067b8fcffc8b
Reviewed-on: https://chromium-review.googlesource.com/531026
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45887}
Adds support for lowering of ToPrimitiveToString and StringConcat bytecodes
to the corresponding builtins. As part of this, moves the interpreter
implementation of these operations into the appropriate builtin generators
and add builtin support for them.
Also adds TailCallRuntimeN operator to code-assembler which enables tail calling
a runtime function when the arguments have already been pushed onto the stack.
BUG=v8:6243
Change-Id: Id5c851bc42e4ff490d9a23a8990ae331c7eac73e
Reviewed-on: https://chromium-review.googlesource.com/515362
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45756}
Rather than trying to pre-calculate the number of contexts required during
scope analysis, instead just allocate context registers in the register
allocator. This reduces frame size a bit due to reusing of registers when
the context isn't pushed.
BUG=v8:6322, chromium:716265
Change-Id: I145e38fcb3797a3b86c91e90ea9326a6e55b9b89
Reviewed-on: https://chromium-review.googlesource.com/514087
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45522}
Reland d8bfdb7a99
Original commit message:
If alignment parameter is set, the memory returned by the
StackSlot operator will be aligned according to the parameter.
The implementation goes like this. If alignment parameter is set
we allocate a bit more memory than actually needed and so we
can move the beginning of the StackSlot in order to have it aligned.
BUG=
Review-Url: https://codereview.chromium.org/2874713003
Cr-Commit-Position: refs/heads/master@{#45339}
Introduce a new SwitchSmiTable bytecode for generators, which does a
table lookup for the accumulator value in a jump table stored in the
constant array pool. This removes the if-else chains at resumable
function/loop headers.
As a drive-by, add a scoped environment saving struct to the bytecode
graph builder.
Bug: v8:6351
Bug: v8:6366
Change-Id: I63be15a8b599d6684c7df19dedb8860562678fb0
Reviewed-on: https://chromium-review.googlesource.com/500271
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#45314}
Intrinsic and generic lowering for generator object creation. In a follow-on, create lowering will be addressed.
BUG=v8:6352
Review-Url: https://codereview.chromium.org/2862213002
Cr-Commit-Position: refs/heads/master@{#45171}
When the incoming value to ChangeFloat64ToTagged is in Smi range, we
represent it as Smi instead of a HeapNumber. This addresses a range of
problems where TurboFan unnecessarily deoptimizes because an operation
learned Smi feedback in Ignition, but was then confronted with a tagged
HeapNumber in TurboFan, just because the value was also represented as
unboxed double somewhere in the meantime.
BUG=v8:6256
R=yangguo@chromium.org
Review-Url: https://codereview.chromium.org/2815283002
Cr-Commit-Position: refs/heads/master@{#44631}
All the optimizations have now been moved to either the BytecodeGenerator
or the BytecodeArrayWriter/Builder.
BUG=v8:6194
Change-Id: Ie5c5d55e824c94ffb503af376c72bc64ad1f6f81
Reviewed-on: https://chromium-review.googlesource.com/469349
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44564}
Moves the logic for eliding non-effectful accumulator load elision from the
peephole optimizer to the BytecodeArrayWriter.
BUG=v8:6194
Change-Id: I05fbe4ee8ac340e5c355285d0b47e4a9d52fd0a8
Reviewed-on: https://chromium-review.googlesource.com/469828
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44560}
This gives us more precise type information, so we can avoid some type
guards to refine the type information back.
The motivation for this is to help escape analysis by not introducing
redundant type guards (which escape analysis cannot handle yet even
though it could and should do).
Motivating example:
In the example below, the out-of-object property array for properties
fld5 and fld6 gets type Any when it is created by "o.fld5 = 5" (for
object literals, we store 4 properties in-objeca, the rest goes out
of object).
When we run load elimination for the load the out-of-object property
array (to store 6 into o.fld6), load elimination inserts TypeGuard to
enforce the Type::Internal() type. This makes escape analysis bail out
on this object, and we do not eliminate the object creation.
function f() {
var o = {};
o.fld1 = 1;
o.fld2 = 2;
o.fld3 = 3;
o.fld4 = 4;
o.fld5 = 5;
o.fld6 = 6;
}
f();
f();
%OptimizeFunctionOnNextCall(f);
f();
Review-Url: https://codereview.chromium.org/2797993006
Cr-Commit-Position: refs/heads/master@{#44470}
Move the ToBoolean elision in the BytecodeGenerator instead of the
peephole optimizer. Adds a TypeHint mechanism to the ExpressionResult
to enable passing of type hints through the ast visitor.
BUG=v8:6194
Change-Id: Ic55506ba11b213f7459250004d3f18cab04ee9b3
Reviewed-on: https://chromium-review.googlesource.com/467208
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#44415}
This handles non-strict equality comparison operations having number
feedback during the early type-hint lowering (i.e. during graph
construction).
R=jarin@chromium.org
Change-Id: I1db67e78312934bbb20aee775979797420ff2581
Reviewed-on: https://chromium-review.googlesource.com/455796
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43824}
This changes the IR to no longer require single {IfSuccess} projection
nodes unless there is a corresponding {IfException} node that links the
potentially throwing call to an exception handler. This reduces graph
size as well as compilation time when exception handlers aren't present.
The new invariant for potentially throwing nodes is: Nodes that can
potentially throw either have both IfSuccess/IfException projections as
the only control uses and no direct control uses, or no projections at
all and solely direct control uses.
R=jarin@chromium.org
Change-Id: I3d9cd816d74ad5af13e0673da7ec7a98f1ecdc7e
Reviewed-on: https://chromium-review.googlesource.com/449715
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43814}
With this change, on ia32 and x64, a load from memory into a register can be replaced by a memory operand for integer binops if it makes sense.
BUG=
Review-Url: https://codereview.chromium.org/2728533003
Cr-Commit-Position: refs/heads/master@{#43739}
Fix two issues in the interpreter entry for 64 bit return values on
32 bit platforms. First, the effect chain was slightly incorrect, second
the order of the returned values was wrong.
Also add a test case for this.
Tested on x64, ia32 and s390.
Plus drive-by fix in Int64Lowering to reuse global constants for
big-endian/little-endian disambiguation.
R=titzer@chromium.org
BUG=v8:5822
Review-Url: https://codereview.chromium.org/2731713002
Cr-Commit-Position: refs/heads/master@{#43654}
So far we only recognize the special
NumberFloor(NumberDivide(lhs, rhs))
subgraph when both lhs and rhs are in the Unsigned32 range, and the
result is a PlainNumber. Extend this pattern matching to also cover
NumberFloor(SpeculativeNumberDivide(lhs, rhs))
and to replace the NumberFloor with NumberToInt32 truncation if the
lhs value is in Signed32 range and the rhs is in Unsigned32 range.
R=jarin@chromium.org
BUG=v8:5267
Review-Url: https://codereview.chromium.org/2739573004
Cr-Commit-Position: refs/heads/master@{#43642}
The parser already changes all negative equality comparison operations
to their positive pendants in {ParserBase::ParseBinaryExpression}. No
other source of the Token::NE exists in the system. We can remove all
handling from the compiler and interpreter backends.
R=bmeurer@chromium.org
Change-Id: I58722c08dd8e498f20c65886fce86b8172737b10
Reviewed-on: https://chromium-review.googlesource.com/449716
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43627}
We don't need the JSStrictNotEqual operator in the compiler, because
this is never generated by the BytecodeGraphBuilder, and the code in
the AstGraphBuilder was dead code. Also remove the backing builtin
StrictNotEqual.
R=mstarzinger@chromium.org
BUG=v8:5267
Review-Url: https://codereview.chromium.org/2727003006
Cr-Commit-Position: refs/heads/master@{#43594}
We can compile a !== a and Number.isNaN(a) to ObjectIsNaN. The former is
commonly used to check for NaN, i.e. in case of equals in AngularJS.
R=jarin@chromium.org
BUG=v8:5267
Review-Url: https://codereview.chromium.org/2722483003
Cr-Commit-Position: refs/heads/master@{#43572}
The x64 side is included in https://chromium-review.googlesource.com/c/444226/
BUG=v8:5294
Change-Id: Ie255604c5e38c72e3c2b76e1ca3557a5fde108ee
Reviewed-on: https://chromium-review.googlesource.com/446394
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#43481}
