Inlined strict mode functions (that are not called as methods) will get
their receiver reset to undefined. This should not happen when inlining
constructors.
This change also simplifies the test suite to reuse the same closures
into which constructors get inlined and use gc() to force V8 to forget
collected type feedback.
R=vegorov@chromium.org
TEST=mjsunit/compiler/inline-construct
Review URL: https://chromiumcodereview.appspot.com/9597017
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10920 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The old code used a separate HToInt32 instruction which had a wrong register
constraint for the input register which caused wrong result when the stored value
is used after a typed array store. (UseRegister instead of UseTempRegister) when no
SSE3 is available.
This change fixes it by replacing HToInt32 with the corresponding HChange
instruction which has correct register contraints.
TEST=mjsunit/compiler/regress-toint32.js
Review URL: https://chromiumcodereview.appspot.com/9565007
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10891 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Modify PreProcessOsrEntry to work with OSR entries that have non-empty expression stack.
Modify graph builder to take for-in state from environment instead of directly referencing emitted instructions.
Extend %OptimizeFunctionOnNextCall with an argument to force OSR to make writing OSR tests easier: %OptimizeFunctionOnNextCall(f, "osr").
R=fschneider@chromium.org
TEST=test/mjsunit/compiler/optimized-for-in.js
Review URL: https://chromiumcodereview.appspot.com/9431030
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10796 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Only JSObject enumerables with enum cache (fast case properties, no interceptors, no enumerable properties on the prototype) are supported.
HLoadKeyedGeneric with keys produced by for-in enumeration are recognized and rewritten into direct property load by index. For this enum-cache was extended to store property indices in a separate array (see handles.cc).
New hydrogen instructions:
- HForInPrepareMap: checks for-in fast case preconditions and returns map that contains enum-cache;
- HForInCacheArray: extracts enum-cache array from the map;
- HCheckMapValue: map check with HValue map instead of immediate;
- HLoadFieldByIndex: load fast property by it's index, positive indexes denote in-object properties, negative - out of object properties;
Changed hydrogen instructions:
- HLoadKeyedFastElement: added hole check suppression for loads from internal FixedArrays that are knows to have no holes inside.
R=fschneider@chromium.org
BUG=
TEST=
Review URL: https://chromiumcodereview.appspot.com/9425045
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10794 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This extends the current support for nested object literals we already
have in Crankshaft, to also support nested array literals and mixed
nested literals containing arrays and objects. All three types are
generated by the unified HFastLiteral instruction.
All previous upper bounds on nested literal graphs remain unchanged,
keeping the size of generated code in check.
The main intention is to boost performance of two-dimensional array
literals containing constant elements (aka. matrices).
R=danno@chromium.org
TEST=mjsunit/compiler/literals-optimized
Review URL: https://chromiumcodereview.appspot.com/9403018
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10734 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Until now we only could inline as specialized HIR instructions when called
as a method (e.g. Math.abs)
It is very common practice to abbreviate calls to those functions by defining
a global or local variable like:
var a = Math.abs;
var x = a(123);
This change allows inlining them when called as a function (global or local).
Review URL: https://chromiumcodereview.appspot.com/9365013
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10640 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Changes the way we do lazy deoptimization:
1. For side-effect instructions, we insert the lazy-deopt call at
the following LLazyBailout instruction.
CALL
GAP
LAZY-BAILOUT ==> lazy-deopt-call
2. For other instructions (StackCheck) we insert it right after the
instruction since the deopt targets an earlier deoptimization environment.
STACK-CHECK
GAP ==> lazy-deopt-call
The pc of the lazy-deopt call that will be patched in is recorded in the
deoptimization input data. Each Lithium instruction can have 0..n safepoints.
All safepoints get the deoptimization index of the associated LAZY-BAILOUT
instruction. On lazy deoptimization we use the return-pc to find the safepoint.
The safepoint tells us the deoptimization index, which in turn finds us the
PC where to insert the lazy-deopt-call.
Additional changes:
* RegExpLiteral marked it as having side-effects so that it
gets an explicitlazy-bailout instruction (instead of
treating it specially like stack-checks)
* Enable target recording CallFunctionStub to achieve
more inlining on optimized code.
BUG=v8:1789
TEST=jslint and uglify run without crashing, mjsunit/compiler/regress-lazy-deopt.js
Review URL: http://codereview.chromium.org/8492004
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10006 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This change fixes a off-by-one level error when dropping the
function from the environment. The function of the outermost
environment was not dropped.
BUG=v8:1785
TEST=test/mjsunit/compiler/regress-inline-callfunctionstub.js
Review URL: http://codereview.chromium.org/8341019
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9789 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This change is based on my previous change enabling inlining calls-as-function
fixing the bugs related to deoptimization.
The function value on top of the environment was dropped too late in the old code.
As a result we could get a wrong value on top after deoptimization.
This change includes r9619. It was reverted because of test failures that are fixed
with this patch.
Review URL: http://codereview.chromium.org/8360001
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9758 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
We have to check for uninitialized uses before phi-elimination. Otherwise we
may miss such a use and result in using the hole value instead. This
causes a NULL-dereference or assertion failure.
BUG=96989
TEST=mjsunit/compiler/regress-96989.js
Review URL: http://codereview.chromium.org/7974009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9337 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The approach is to handle the common case in the optimizing
compiler and to bailout for the rare corner cases.
This is done by initializing all local const-variables with
the hole value and disallowing any use of the hole value statically.
Review URL: http://codereview.chromium.org/6026006
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8104 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Encapsulate the helper functions in mjsunit.js.
Now only exposes the exception class and the assertXXX functions.
Make assertEquals use === instead of ==.
This prevents a lot of possiblefalse positives in tests, and avoids
having to do assertTrue(expected === actual) when you need it.
Fixed some tests that were either buggy or assuming == test.
Review URL: http://codereview.chromium.org/6869007
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7628 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
In the cases where a global property cell cannot be used in the optimized code
use standard load ic to get the property instead of bailing out.
This is re-committing r7212 and r7215 which where reverted in r7239 with the addition of recoring the source position in the hydrogen code for the LoadGlobalCell instruction. To record that position an optional position field has been added to the variable proxy AST node.
Review URL: http://codereview.chromium.org/6758007
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7474 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The class did not correctly implement the RequiredInputRepresentation.
I changed this functions to be abstract so that all hydrogen classes
must implement it.
As a convention instructions with zero input operands return None as input
representation.
Instructions that can handle all input representations without converting before
also have None as required input representation (e.g. HTest)
All other instructions need a proper required input representation.
Review URL: http://codereview.chromium.org/6538088
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6891 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
If we have a property access of the form this.x, where the access site sees
the global object, we can specialize the IC stub so that it performs a map
check without first performing a heap object check.
Ensure that we do not get in JS code with a non-JSObject this value by
deoptimizing at Function.prototype.apply if the first argument is not a
JSObject.
BUG=v8:1128
Review URL: http://codereview.chromium.org/6463025
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6707 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
1. The placement of checks for negative zero has to be computed after
all conversion instructions have been inserted. I separated the code
into its own phase.
2. GVN need to take instruction flags into account when comparing
instructions for redundancy.
Review URL: http://codereview.chromium.org/6260035
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6534 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
When falling off the end of a function inlined in a test context, we cannot
constant fold the test of undefined away. The graph builder assumes that
control flow always reaches both branches of a test.
Instead, explicitly test and branch on "undefined". Introduce a pair of
empty blocks to hold the necessary LeaveInlined instructions.
Review URL: http://codereview.chromium.org/5566005
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5927 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
We may encounter an invalid frame after generating code
for the loop body in case the loop body ends in an unconditional
return. Before setting the type information for the loop variable
we need to check for a valid frame.
Review URL: http://codereview.chromium.org/1106002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4182 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This change add simple local live variable information to
the fast code generator. It supports only AST nodes that
are accepted by the syntax checker.
Each variable use points to a variable definition structure
which contains the last use of the definition.
To determine whether a variable is live after a certain point
we can check whether its last use occurs later in the evaluation
order defined by the AST labeling number.
The new information is currently only printed out together with
the IR and not yet used for code generation.
Review URL: http://codereview.chromium.org/603004
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3839 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Do not use the speculative compiler for functions with other than one
statement in the body, and do not use it if subexpressions can have
side effects. Bailing out to the beginning of the full code is not
sound if side effects have already occurred.
Add tests that would fail without the restrictions.
Review URL: http://codereview.chromium.org/598016
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3826 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Support a binary operation (bitwise OR) so long as it's not nested in
the left subexpression. This ensures that the expression stack never
has height greater than two and so can be kept fully in registers.
The bounded expression stack height and the absence of any side
effects on the fast path allows us to still bailout out to the very
beginning of the function if any of our fast-path checks fail.
Review URL: http://codereview.chromium.org/594008
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3822 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This is a first step towards loading globals directly from property cells instead
of going through a load IC.
This change supports only properties with the DontDelete attribute since
we are only able to bailout into the generic code generated by the secondary
code generator the beginning of a function. The resulting fast-case code is
specialized for a specific context. When invoked with a different global object,
it will always bailout to the secondary code.
When loading a property that does not exist at compile-time or a property
that is deleteable we still generate the generic load IC.
Review URL: http://codereview.chromium.org/565034
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3808 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Until now we only supported postfix operations on global variables.
This change add generic count operations to the top-level compiler.
I tried to re-use code from the code generator used for assignment expressions
where possible.
Review URL: http://codereview.chromium.org/496009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3530 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
o.x() and o[expr]()
other changes:
- Fix missing relocation info for StoreIC on global object.
- Generate only one common return sequence instead of always appending
"return <undefined>" at the end of each function: The first JS
return-statement will generate the common return sequence. All
other return-statements will generate a unconditional branch to the common
return sequence.
Review URL: http://codereview.chromium.org/340037
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3183 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
I also added more unit tests for literals.
Right now, the fast compiler produces code very similar to
the existing code generator. We may consider different ways to
further compact the generated code for top-level code.
ARM always goes through a runtime function to initialize computed
properties in an object literal whereas IA32 and x64 use StoreIC.
Review URL: http://codereview.chromium.org/316009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3129 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
currently compiled the same as with the optimizing compiler: they are
cloned from a boilerplate object and the boilerplate objects are
lazily constructed.
Also changed argument pushing on ARM to use stm (store multiple),
which required changing the order of arguments to the runtime
functions DeclareGlobals and NewClosure. They were only used from
generated code.
Finally, changed the toplevel code generator so that stack pops to
discard a temporary became addition to the stack pointer on ia32 and
x64.
Review URL: http://codereview.chromium.org/303021
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3110 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
