Get rid of further typing checks from ChangeLowering and put them into
the representation selection pass instead (encoding the information in
the operator instead).
Drive-by-change: Rename ChangeSmiToInt32 to ChangeTaggedSignedToInt32
for consistency about naming Tagged, TaggedSigned and TaggedPointer.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1909343002
Cr-Commit-Position: refs/heads/master@{#35723}
If we have to convert a float64 value to tagged representation and we
already know that the value is either in Signed31/Signed32 or
Unsigned32 range, then we can just convert the float64 to word32 and
use the fast word32 to tagged conversion. Doing this in
ChangeLowering (or the effect linearization pass) would be unsound, as
the types on the nodes are no longer usable.
This removes all Type uses from effect linearization. There's still some
work to be done for ChangeLowering tho.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1908093002
Cr-Commit-Position: refs/heads/master@{#35713}
The CL #35651 (https://codereview.chromium.org/1858323003) exposed one hiden issue in RunTruncateFloat32ToUint32 test cases and X87 failed at it.
Here is the issue in RunTruncateFloat32ToUint32:
For float input = static_cast<float>(*i), the x87 GCC would optimize the input viariable in float floating register for release build.
The problem is:
SSE float register has single precision rounding semantic While X87 register hasn't when directly use floating register value. It will cause the value of input viariable has
different precision for IA32 and X87 port. So static_cast<uint32_t>(input) will be different for IA32 and X87 port too.
This led to CHECK_EQ(static_cast<uint32_t>(input), m.Call(input)) fail although V8 turbofan JITTed code m.Call(input) has exactly same result in both X87 and IA32 port.
So we add the following sentence to do type cast to keep the single precision for RunTruncateFloat32ToUint32 by forcing the input viariable get value from memory insread of
floating register.
Such as: volatile float input = static_cast<float>(*i).
BUG=
Review URL: https://codereview.chromium.org/1905883002
Cr-Commit-Position: refs/heads/master@{#35689}
This patch provides a new implementation of popcnt and ctz in the case
where the platform does not provide these instructions. Instead of
building a TF graph which implements it we now call a C function.
Additionally I turned on additional tests in test-run-wasm-64.cc
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1857363003
Cr-Commit-Position: refs/heads/master@{#35685}
Also factor out test cases from test-run-machops.cc into test-run-load-store.cc
BUG=chromium:599717
LOG=Y
Review URL: https://codereview.chromium.org/1858323003
Cr-Commit-Position: refs/heads/master@{#35651}
This disables parsing when we optimize directly from bytecode using
TurboFan, because TurboFan is capable of building graphs out of the
bytecode directly.
R=bmeurer@chromium.org
BUG=v8:4280
LOG=n
Review URL: https://codereview.chromium.org/1891663004
Cr-Commit-Position: refs/heads/master@{#35567}
We had exactly one test case for --noturbo-types, so it's likely that
the generic pipeline (without types) was already broken for quite some
time, plus no one expressed interest in maintaining it, plus it
complicates the JSGenericLowering integration. So decision is to kill
it.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1872333002
Cr-Commit-Position: refs/heads/master@{#35387}
The parser should never need to look at the underlying closure object,
hence the field can be moved from ParseInfo into CompilationInfo.
R=rossberg@chromium.org
Review URL: https://codereview.chromium.org/1863083002
Cr-Commit-Position: refs/heads/master@{#35358}
AddInt + WordShl cases can be optimized on MIPS and this CL contains
tests for those special cases. These test also must be passed on other
architectures.
BUG=
Review URL: https://codereview.chromium.org/1867923002
Cr-Commit-Position: refs/heads/master@{#35349}
This particularly changes the StackTraceFrameIterator such that is not
only returs JavaScriptFrames, but also WasmFrames. Because of that,
some methods (Summarize, function, receiver) were pulled up to the
StandardFrame, with specializations in JavaScriptFrame and WasmFrame.
R=jfb@chromium.org, titzer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1861283002
Cr-Commit-Position: refs/heads/master@{#35293}
1) I moved the implementations of the wrapper functions into a new cc
file so that I can use these wrapper functions in tests.
2) I made a generic test for all tests in
test-run-calls-to-external-references.cc. In the new test we only
compare the result of a function call through an external reference with
the result of a direct function call. This is sufficient because we only
want to test function calls through external references work here.
The implementation of these functions are tested somewhere else.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1853123002
Cr-Commit-Position: refs/heads/master@{#35289}
This allows us to remove the troublesome %_MathClz32 intrinsic and also
allows us to utilize the functionality that is already available in
TurboFan. Also introduce a proper NumberClz32 operator so we don't need
to introduce a machine operator at the JS level.
R=epertoso@chromium.org
Review URL: https://codereview.chromium.org/1852553003
Cr-Commit-Position: refs/heads/master@{#35208}
We expect that the majority of malloc'd memory held by V8 is allocated
in Zone objects. Introduce an Allocator class that is used by Zones to
manage memory, and allows for querying the current usage.
BUG=none
R=titzer@chromium.org,bmeurer@chromium.org,jarin@chromium.org
LOG=n
TBR=rossberg@chromium.org
Review URL: https://codereview.chromium.org/1847543002
Cr-Commit-Position: refs/heads/master@{#35196}
Migrate Math.ceil, Math.round and Math.trunc to TurboFan code stubs,
similar to what we did with Math.floor, and make these builtins properly
optimizable in TurboFan via appropriate simplified operators NumberCeil,
NumberRound and NumberTrunc, which are intended to be reusable for
ToInteger and ToLength optimizations that will be done in a followup CL.
Also allows us to kill the funky %RoundNumber runtime function, which
was quite heavy.
Improve test coverage for Math.ceil and Math.trunc a lot, especially
making sure that we also properly trigger the TurboFan builtin reducer
case.
R=jarin@chromium.org
BUG=v8:4059
LOG=n
Review URL: https://codereview.chromium.org/1841993002
Cr-Commit-Position: refs/heads/master@{#35135}
Int64Mul is lowered to a new turbofan operator, Int32MulPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the multiplication.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1807273002
Cr-Commit-Position: refs/heads/master@{#35131}
This way we avoid the second deoptimization for the Math.floor and
Math.ceil builtins when -0 is involved. We still deoptimize the inlined
Crankshaft version in various cases, that's a separate issue.
The algorithm used for implement CodeStubAssembler::Float64Floor is
vaguely based on the fast math version used in the libm of various BSDs,
but had to be reengineered to match the EcmaScript specification.
R=epertoso@chromium.org
BUG=v8:2890, v8:4059
LOG=n
Review URL: https://codereview.chromium.org/1828253002
Cr-Commit-Position: refs/heads/master@{#35083}
Makes --ignition cause eager compilation if we aren't building the startup
snapshot.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1811553003
Cr-Commit-Position: refs/heads/master@{#35066}
Reason for revert:
Makes nosnap bots timeout due to having to rebuild bytecode handlers.
Original issue's description:
> [Interpreter] Remove separate Ignition snapshot.
>
> Removes the seperate Ignition snapshot and build the Ignition bytecode
> handlers in the default snapshot.
>
> BUG=v8:4280
> LOG=N
>
> Committed: https://crrev.com/1798f3fe84faff32ba44e09f6aed79245dd98d80
> Cr-Commit-Position: refs/heads/master@{#35058}
TBR=machenbach@google.com,yangguo@chromium.org,mstarzinger@chromium.org,machenbach@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review URL: https://codereview.chromium.org/1827143002
Cr-Commit-Position: refs/heads/master@{#35059}
Removes the seperate Ignition snapshot and build the Ignition bytecode
handlers in the default snapshot.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1833643002
Cr-Commit-Position: refs/heads/master@{#35058}
Introduce TruncateTaggedToFloat64 and TruncateTaggedToWord32 into the
CodeStubAssembler, which encapsulates the ToNumber truncation and
returns the resulting number as either Float64 or further truncated to
Word32.
R=jarin@chromium.org
BUG=v8:4587
LOG=n
Review URL: https://codereview.chromium.org/1827813004
Cr-Commit-Position: refs/heads/master@{#35051}
This CL adds an extra pass before calculating the special RPO
order in the custom RawMachineAssembler pipeline that
walks through the schedule and inserts extra blocks to
guarantee that the control flow graph is in split edge form. It
also propagates deferred block marks forward to these new
blocks if appropriate.
Review URL: https://codereview.chromium.org/1811333002
Cr-Commit-Position: refs/heads/master@{#35014}
Now that ES2015 const has shipped, in Chrome 49, legacy const declarations
are no more. This lets us remove a bunch of code from many parts of the
codebase.
In this patch, I remove parser support for generating legacy const variables
from const declarations. This also removes the special "illegal declaration"
bit from Scope, which has ripples into all compiler backends.
Also gone are any tests which relied on legacy const declarations.
Note that we do still generate a Variable in mode CONST_LEGACY in one case:
function name bindings in sloppy mode. The likely fix there is to add a new
Variable::Kind for this case and handle it appropriately for stores in each
backend, but I leave that for a later patch to make this one completely
subtractive.
Review URL: https://codereview.chromium.org/1819123002
Cr-Commit-Position: refs/heads/master@{#35002}
This CL adds support for builtins with JavaScript linkage written using
the TurboFan CodeStubAssembler, but with a JSCall descriptor (which was
already supported thanks to a previous patch by Ben Smith). As a first
example, we convert the Math.sqrt builtin and thereby get rid of the
%_MathSqrt intrinsic, which causes trouble for the representation
selection pass in the JavaScript pipeline.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1824993002
Cr-Commit-Position: refs/heads/master@{#34989}
Introduces a bytecode whose handler executes the equivalent of %_IsArray and %_IsJSReceiver without a runtime call.
BUG=v8:4822
LOG=y
Review URL: https://codereview.chromium.org/1645763003
Cr-Commit-Position: refs/heads/master@{#34983}
The CL also add guard nodes to places where we assume that certain
values are numbers.
Review URL: https://codereview.chromium.org/1821133002
Cr-Commit-Position: refs/heads/master@{#34977}
This was once meant to be used for JavaScript code stubs, but since we
found a better way to do code stubs using TurboFan, we don't need this
runtime entry and intrinsic anymore.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1821123002
Cr-Commit-Position: refs/heads/master@{#34976}
Split ToNumberStub into the entry ToNumberStub, and two new stubs,
StringToNumberStub and NonNumberToNumberStub, which can be used when we
already know something about the input (i.e. in various branches of the
code stubs, or in TurboFan graphs).
Also introduce an appropriate StringToNumber simplified operator for
TurboFan, that is pure and is lowered to an invocation of the newly
added StringToNumberStub.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1818923002
Cr-Commit-Position: refs/heads/master@{#34922}
Port 33c08596e1
Original commit message:
Int64Sub is lowered to a new turbofan operator, Int32SubPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the subtraction.
The implementation is very similar to the implementation of Int64Add.
R=ahaas@chromium.org, joransiu@ca.ibm.com, jyan@ca.ibm.com, michael_dawson@ca.ibm.com
BUG=
Review URL: https://codereview.chromium.org/1812473002
Cr-Commit-Position: refs/heads/master@{#34821}
Int64Sub is lowered to a new turbofan operator, Int32SubPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the subtraction.
The implementation is very similar to the implementation of Int64Add.
@v8-arm-ports: please take a careful look at the implementation of sbc
in the simulator.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1778893005
Cr-Commit-Position: refs/heads/master@{#34808}
Updates InlineTwice to declare a function and then return a function
instead of using function expressions by wrapping a function with '('
and ')'. The earlier implementation would cause the function to
compile immediately instead of lazy compile. Also updates cctest.status
BUG=v8:4280,v8:4837,v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1800073002
Cr-Commit-Position: refs/heads/master@{#34790}
On 32-bit systems these instructions are compiled to calls to
C functions. The TF node for the function call is already generated in
the wasm compiler, the lowering of the I64 parameters is done in the
Int64Lowering. We use the return value of the C function to determine
whether the calculation should trap or not.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1804513002
Cr-Commit-Position: refs/heads/master@{#34768}
The previous register allocation allowed invalid register aliasing in
cases where in the TF graph the node was used for multiple inputs of the
Word32PairShl node.
Additionally I renamed PairLsl to LslPair in the code generation for
consistency.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1776393004
Cr-Commit-Position: refs/heads/master@{#34755}
Int64Add is lowered to a new turbofan operator, Int32AddPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the addition.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1778493004
Cr-Commit-Position: refs/heads/master@{#34747}
On 32-bit systems I64XConvertFXX instructions are compiled to calls to
C functions. The TF node for the function call is already generated in
the wasm compiler, the lowering of the I64 parameter is done in the
Int64Lowering. We use the return value of the C function to determine
whether the conversion should trap or not.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1775903002
Cr-Commit-Position: refs/heads/master@{#34738}
This is a pure refactoring and renaming of methods in the compiler API
with the goal to increase readability. Also the compiler API is moved to
the top of the file, as it is the central piece in that file.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1766623004
Cr-Commit-Position: refs/heads/master@{#34579}
Instead of using CheckFloatEq and CheckDoubleEq directly, I introduced
a macro which first stores the expected result in a volatile variable.
Here are some comments of previous CLs:
The reason is same as the CL #31808 (issue 1430943002, X87: Change the test case for X87 float operations), please refer: https://codereview.chromium.org/1430943002/.
Here is the key comments from CL #31808
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function,
those inlined functions has different behavior comparing with GCC ia32 build and x87 build.
The major difference is sse float register still has single precision rounding semantic. While X87 register has no such rounding precsion semantic when directly use register value.
The V8 turbofan JITTed has exactly same result in both X87 and IA32 port.
So we add the following sentence to do type cast to keep the same precision for RunCallInt64ToFloat32/RunCallInt64ToFloat64. Such as: volatile double expect = static_cast<float>(*i).
R=titzer@chromium.org, weiliang.lin@intel.com
Review URL: https://codereview.chromium.org/1773513002
Cr-Commit-Position: refs/heads/master@{#34534}
On 32-bit systems FXXXConvertI64 instructions are compiled to calls to
C functions. The TF node for the function call is already generated in
the wasm compiler, the lowering of the I64 parameter is done in the
Int64Lowering.
R=titzer@chromium.org, yangguo@chromium.org
Review URL: https://codereview.chromium.org/1738623003
Cr-Commit-Position: refs/heads/master@{#34487}
Add StringLessThanStub, StringLessThanOrEqualStub, StringGreaterThanStub
and StringGreaterThanOrEqualStub, based on the CodeStubAssembler, and
hook them up with TurboFan (and Ignition). The stubs are currently
essentially comparable with the StringCompareStub, which is now
obsolete. We can later extend these stubs to cover more interesting
cases (i.e. two byte sequential string comparisons, etc.).
R=epertoso@chromium.org
Review URL: https://codereview.chromium.org/1765823002
Cr-Commit-Position: refs/heads/master@{#34485}
These new stubs perform exactly the same job as the string equality case
for the CompareIC, but are platform independent and usable outside of
fullcodegen and Crankshaft. We use them in the StrictEqualStub and the
StrictNotEqualStub instead of falling back to the runtime immediately
for String comparisons, and we also use them in TurboFan to perform
String equality or inequality comparisons.
These stubs currently handle only internalized and one byte strings w/o
going to C++, but it should be easy to add support for more string cases
later, i.e. utilizing already flattened cons strings or comparing two
byte strings as well.
Review URL: https://codereview.chromium.org/1761823002
Cr-Commit-Position: refs/heads/master@{#34459}
The LoadBuffer operator that is used for asm.js heap access claims to
return only the appropriate typed array type, but out of bounds access
could make it return undefined. So far we tried to "repair" the graph
later if we see that our assumption was wrong, and for various reasons
that worked for some time. But now that wrong type information that is
propagated earlier is picked up appropriately and thus we generate wrong
code, i.e. we in the repro case we feed NaN into ChangeFloat64Uint32 and
thus get 2147483648 instead of 0 (with proper JS truncation).
This was always considered a temporary hack until we have a proper
asm.js pipeline, but since we still run asm.js through the generic
JavaScript pipeline, we have to address this now. Quickfix is to just
bailout from the pipeline when we see that the LoadBuffer type was
wrong, i.e. the result of LoadBuffer is not properly truncated and thus
undefined or NaN would be observable.
R=mstarzinger@chromium.org, jarin@chromium.org
BUG=chromium:589792
LOG=y
Review URL: https://codereview.chromium.org/1740123002
Cr-Commit-Position: refs/heads/master@{#34322}
Migrate Math.imul, Math.fround, Math.acos, Math.asin and Math.atan to
C++ builtins, as these ones call into C++ anyway and so there's no
need to have this extra wrapper around it.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1731543004
Cr-Commit-Position: refs/heads/master@{#34274}
Reason for revert:
It is not a good idea to call CallICStub from the builtin. It might be sensitive to the frame structure. Constructing a internal frame might cause problems. It is much better to inline the code related to the type feedback vector into the builtin.
Original issue's description:
> [Interpreter] Implements calls through CallICStub in the interpreter.
>
> Calls are implemented through CallICStub to collect type feedback. Adds
> a new builtin called InterpreterPushArgsAndCallIC that pushes the
> arguments onto stack and calls CallICStub.
>
> Also adds two new bytecodes CallIC and CallICWide to indicate calls have to
> go through CallICStub.
>
> MIPS port contributed by balazs.kilvady.
>
> BUG=v8:4280, v8:4680
> LOG=N
>
> Committed: https://crrev.com/20362a2214c11a0f2ea5141b6a79e09458939cec
> Cr-Commit-Position: refs/heads/master@{#34244}
TBR=rmcilroy@chromium.org,mvstanton@chromium.org,mstarzinger@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280, v8:4680
Review URL: https://codereview.chromium.org/1731253003
Cr-Commit-Position: refs/heads/master@{#34252}
Calls are implemented through CallICStub to collect type feedback. Adds
a new builtin called InterpreterPushArgsAndCallIC that pushes the
arguments onto stack and calls CallICStub.
Also adds two new bytecodes CallIC and CallICWide to indicate calls have to
go through CallICStub.
MIPS port contributed by balazs.kilvady.
BUG=v8:4280, v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1688283003
Cr-Commit-Position: refs/heads/master@{#34244}
The CL #33796 (https://codereview.chromium.org/1628133002) added the RunRoundUint32ToFloat32 test case and X87 failed at it.
The reason is same as the CL #33630 (Issue 1649323002: X87: Change the test case for X87 RunRoundInt32ToFloat32), please refer: https://codereview.chromium.org/1649323002.
Here is the key comments from CL #33630:
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function,
those inlined functions has different behavior comparing with GCC ia32 build and x87 build.
The major difference is sse float register still has single precision rounding semantic. While X87 register has no such rounding precsion semantic when directly use register value.
The V8 turbofan JITTed has exactly same result in both X87 and IA32 port.
For CHECK_EQ(a, b) function, if a and b are doubles, it will has similar behaviors like CheckFloatEq(...) and CheckDoubleEq(...) function when compiled by GCC and causes the test case
fail.
So we add the following sentence to do type case to keep the same precision for RunRoundUint32ToFloat32. Such as: volatile double expect = static_cast<float>(*i).
BUG=
Review URL: https://codereview.chromium.org/1714413002
Cr-Commit-Position: refs/heads/master@{#34202}
Reason for revert:
Tanks benchmarks (e.g., Octane box2d TF).
Original issue's description:
> [turbofan] Connect ObjectIsNumber to effect and control chains.
>
> In theory, we could connect the nodes when doing
> the schedule-in-the-middle pass, but that would require creating two
> versions of the operator (effectful and pure). I believe we do not
> lose anything by wiring the node up eagerly.
>
> Committed: https://crrev.com/2894e80a0a4a51a0d72e72aa48fcd01968f7949f
> Cr-Commit-Position: refs/heads/master@{#34141}
TBR=bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1718483002
Cr-Commit-Position: refs/heads/master@{#34147}
In theory, we could connect the nodes when doing
the schedule-in-the-middle pass, but that would require creating two
versions of the operator (effectful and pure). I believe we do not
lose anything by wiring the node up eagerly.
Review URL: https://codereview.chromium.org/1709093002
Cr-Commit-Position: refs/heads/master@{#34141}
The BufferedRawMachineAssemblerTester caused problems for the
Int64Lowering. Instead we construct a TF graph now which is compiled by
Pipeline::GenerateCodeForTesting.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1702023002
Cr-Commit-Position: refs/heads/master@{#34107}
This CL splits up some long-running bytecode graph builder tests.
There's a lot of working going on here that probably should be split
up into smaller tests and/or mjsunit tests once we have the full
ignition pipeline. This one just targets the top offenders for now.
R=rmcilroy@chromium.org, oth@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1699113002
Cr-Commit-Position: refs/heads/master@{#34039}
Drive-by-fix: Remove the (now) unused %_SetValueOf and %_JSValueGetValue
intrinsics from the various compilers and the runtime.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1698343002
Cr-Commit-Position: refs/heads/master@{#34037}
This functionality is useful for stubs that need to walk the stack. The new
machine operator, LoadParentFramePointer dosn't force the currently compiling
method to have a frame in contrast to LoadFramePointer. Instead, it adapts
accordingly when frame elision is possible, making efficient stack walks
possible without incurring a performance penalty for small stubs that can
benefit from frame elision.
R=bmeurer@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1695313002
Cr-Commit-Position: refs/heads/master@{#34014}
There are only two uses of %_ObjectEquals left, which should actually
use strict equality instead, so there's no need to keep this special
logic at all.
R=mvstanton@chromium.org
Review URL: https://codereview.chromium.org/1692193002
Cr-Commit-Position: refs/heads/master@{#33948}
The tests in question have been disabled because throwing into lazy
deoptimized code was borked. After recent fixes landed these tests
should now pass again.
R=jarin@chromium.org
TEST=cctest/test-run-deopt/DeoptExceptionHandler
BUG=v8:4195
LOG=n
Review URL: https://codereview.chromium.org/1692873002
Cr-Commit-Position: refs/heads/master@{#33937}
The field in question is only needed when the optimizing compiler is
triggered via OSR. All other paths (e.g. from bytecode stream) should
not rely on the unoptimized code being present.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1685633002
Cr-Commit-Position: refs/heads/master@{#33860}
This makes sure we can run through the TurboFan pipeline without having
to parse the source when using the bytecode stream as input. This path
is now being tested by the BytecodeGraphTester helper.
R=titzer@chromium.org,rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1679313002
Cr-Commit-Position: refs/heads/master@{#33856}
By now only the default %TypedArray%.prototype.sort compare function
and the JS implementation of SameValueZero were still using the odd
%_IsMinusZero intrinsic, whose semantics both included a number check
(actually HeapNumber test) plus testing if the heap number stores the
special -0 value. In both cases we already know that we deal with
number so we can reduce it to a simple number test for -0, which can
be expressed via dividing 1 by that value and checking the sign of
the result. In case of the compare function, we can be even smarter
and work with the reciprocal values in case x and y are equal to 0
(although long term we should probably rewrite the fast case for
the typed array sorting function in C++ anyway, which will be way,
way faster than our handwritten callback-style, type-feedback
polluted JS implementation).
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1680783002
Cr-Commit-Position: refs/heads/master@{#33833}
Adds implementation and tests to support const/let variables in the
interpreter.
BUG=v8:4280,v8:4679
LOG=N
Review URL: https://codereview.chromium.org/1634153002
Cr-Commit-Position: refs/heads/master@{#33819}
Reason for revert:
Must revert for now due to chromium api natives issues.
Original issue's description:
> Type Feedback Vector lives in the closure
>
> (RELAND: the problem before was a missing write barrier for adding the code
> entry to the new closure. It's been addressed with a new macro instruction
> and test. The only change to this CL is the addition of two calls to
> __ RecordWriteCodeEntryField() in the platform CompileLazy builtin.)
>
> We get less "pollution" of type feedback if we have one vector per native
> context, rather than one for the whole system. This CL moves the vector
> appropriately.
>
> We rely more heavily on the Optimized Code Map in the SharedFunctionInfo. The
> vector actually lives in the first slot of the literals array (indeed there is
> great commonality between those arrays, they can be thought of as the same
> thing). So we make greater effort to ensure there is a valid literals array
> after compilation.
>
> This meant, for performance reasons, that we needed to extend
> FastNewClosureStub to support creating closures with literals. And ultimately,
> it drove us to move the optimized code map lookup out of FastNewClosureStub
> and into the compile lazy builtin.
>
> The heap change is trivial so I TBR Hannes for it...
> Also, Yang has had a look at the debugger changes already and approved 'em. So he is TBR style too.
> And Benedikt reviewed it as well.
>
> TBR=hpayer@chromium.org, yangguo@chromium.org, bmeurer@chromium.org
>
> BUG=
>
> Committed: https://crrev.com/bb31db3ad6de16f86a61f6c7bbfd3274e3d957b5
> Cr-Commit-Position: refs/heads/master@{#33741}
TBR=bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1670813005
Cr-Commit-Position: refs/heads/master@{#33766}
(RELAND: the problem before was a missing write barrier for adding the code
entry to the new closure. It's been addressed with a new macro instruction
and test. The only change to this CL is the addition of two calls to
__ RecordWriteCodeEntryField() in the platform CompileLazy builtin.)
We get less "pollution" of type feedback if we have one vector per native
context, rather than one for the whole system. This CL moves the vector
appropriately.
We rely more heavily on the Optimized Code Map in the SharedFunctionInfo. The
vector actually lives in the first slot of the literals array (indeed there is
great commonality between those arrays, they can be thought of as the same
thing). So we make greater effort to ensure there is a valid literals array
after compilation.
This meant, for performance reasons, that we needed to extend
FastNewClosureStub to support creating closures with literals. And ultimately,
it drove us to move the optimized code map lookup out of FastNewClosureStub
and into the compile lazy builtin.
The heap change is trivial so I TBR Hannes for it...
Also, Yang has had a look at the debugger changes already and approved 'em. So he is TBR style too.
And Benedikt reviewed it as well.
TBR=hpayer@chromium.org, yangguo@chromium.org, bmeurer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1668103002
Cr-Commit-Position: refs/heads/master@{#33741}
Adds implementation and tests for with statement to interprter.
BUG=v8:4280,v8:4684
LOG=N
Review URL: https://codereview.chromium.org/1656863002
Cr-Commit-Position: refs/heads/master@{#33705}
Moves the temporary register allocator out of the bytecode array
builder into TemporaryRegisterAllocator class and adds unittests.
Particular must be taken around the translation window boundary
motivating the addition of tests.
Also adds a Clear() method to IdentityMap() which is called by
the destructor. This allows classes to hold an IdentityMap if
they are zone allocated. Classes must call Clear() before the zone
is re-cycled or face v8 heap corruption.
BUG=v8:4280,v8:4675
LOG=N
Review URL: https://codereview.chromium.org/1651133002
Cr-Commit-Position: refs/heads/master@{#33686}
If the architecture does not provide rounding instructions, then C
implementations of these rounding instructions are called. The C
implementations from math.h are used, function pointers are registered
as external references so that they can be call from the simulator.
R=titzer@chromium.org
BUG=575379
LOG=Y
Review URL: https://codereview.chromium.org/1661463002
Cr-Commit-Position: refs/heads/master@{#33677}
After this change, the functionality of the CodeStubAssembler should be
sufficient to generate non-trivial stubs (e.g. the KeyedLoadIC) with control
flow, variables and probing of internal meta data structures.
Specifically this patch:
* introduces a Label class, which allows stubs to construct graphs that don't
have linear control graphs.
* introduces a Variable class. Variables can be bound to Node* values at
different points in a non-linear control flow graph. In conjunction with the
Label machinery, the CodeStubAssembler ensures that Phi nodes are inserted at
the "minimal" set of merge points.
* adds Tail calling support to other Stubs and to any arbitrary code whose
interface can be described by a CallInterfaceDescriptor.
* provides new macros for accessing FixedArray elements that are optimized for
use with Smi values.
Review URL: https://codereview.chromium.org/1649723002
Cr-Commit-Position: refs/heads/master@{#33664}
The runtime call to Runtime::kReThrow does not need a frame-state node
attached, the frame-state input count is zero. This restructures the
graph builder to not instantiate a FrameStateBeforeAndAfter for it.
R=jarin@chromium.org
TEST=cctest/test-run-bytecode-graph-builder
BUG=v8:4674
LOG=n
Review URL: https://codereview.chromium.org/1654833002
Cr-Commit-Position: refs/heads/master@{#33641}
Although x87 has 8 registers, it use only 1 double register in TurboFan code generation for some limitations.
So for TestStackSlot() function, use the num_allocatable_double_registers() to check the avaliable double registers
of TurboFan is more suitable than num_double_registers().
BUG=
Review URL: https://codereview.chromium.org/1653913002
Cr-Commit-Position: refs/heads/master@{#33636}
The reachability of a bytecode is implied by a live environment reaching
the bytecode during the abstract control flow simulation of the bytecode
iteration perfromed by the graph builder. There is no need to compute it
upfront anymore.
Also, the upfront computation was only an approximation when it came to
the reachability of an exception handler. This is why several tests for
translation of exception handlers can now be enabled.
R=oth@chromium.org
Review URL: https://codereview.chromium.org/1645293003
Cr-Commit-Position: refs/heads/master@{#33634}
The CL #33347 (https://codereview.chromium.org/1589363002) added the RunRoundInt32ToFloat32 test case and X87 failed at it.
The reason is same as the CL #31808 (issue 1430943002, X87: Change the test case for X87 float operations), please refer: https://codereview.chromium.org/1430943002/.
Here is the key comments from CL #31808
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function,
those inlined functions has different behavior comparing with GCC ia32 build and x87 build.
The major difference is sse float register still has single precision rounding semantic. While X87 register has no such rounding precsion semantic when directly use register value.
The V8 turbofan JITTed has exactly same result in both X87 and IA32 port.
For CHECK_EQ(a, b) function, if a and b are doubles, it will has similar behaviors like CheckFloatEq(...) and CheckDoubleEq(...) function when compiled by GCC and causes the test case
fail.
So we add the following sentence to do type case to keep the same precision for RunRoundInt32ToFloat32. Such as: volatile double expect = static_cast<float>(*i).
BUG=
Review URL: https://codereview.chromium.org/1649323002
Cr-Commit-Position: refs/heads/master@{#33630}
Reason for revert:
problems on Mac64
Original issue's description:
> [turbofan] Add the StackSlot operator to turbofan.
>
> The StackSlot operator allows to allocate a spill slot on the stack. We
> are going to use this operator to pass floats through pointers to c
> functions, which we need for floating point rounding in the case where
> the architecture does not provide rounding instructions.
>
> R=titzer@chromium.org, v8-arm-ports@googlegroups.com, v8-ppc-ports@googlegroups.com, v8-mips-ports@googlegroups.com
>
> Committed: https://crrev.com/7a693437787090d62d937b862e29521debcc5223
> Cr-Commit-Position: refs/heads/master@{#33600}
TBR=titzer@chromium.org,v8-arm-ports@googlegroups.com,v8-mips-ports@googlegroups.com,v8-ppc-ports@googlegroups.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1644283002
Cr-Commit-Position: refs/heads/master@{#33601}
This is to fix a bug in the bytecode graph builder. This cl adds a new merge
node before we copy the environment on conditional/unconditional jumps. Since
these environments could be merged later, we add a place holder merge so that
the control dependencies are correctly merged. If we do not have a merge node
we may incorrectly merge the dependencies into the previous block.
For ex: test-run-variables/ContextStoreVariables in cctests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1641143002
Cr-Commit-Position: refs/heads/master@{#33591}
