Fixed a bug in VisitForInAssignment. After visiting the object the value
to be stored was not loaded back to the accumulator. Also added two tests
to check this case.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1571753002
Cr-Commit-Position: refs/heads/master@{#33188}
Adds support for the CallRuntimeForPair bytecode to the Bytecode Graph
Builder. Modifies the FrameState support to allow updating of output
registers.
Also adds Eval tests to test-run-bytecode-graph-builder since these are
enabled by CallRuntimeForPair support.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1570623007
Cr-Commit-Position: refs/heads/master@{#33186}
The sloppy block-scoped function declaration placeholder statements
are held in parser_zone_-allocated hashtables. These hashtables are
not updated when local_zone_s are removed. Therefore, the
NewSloppyBlockFunctionStatement method should allocate
SloppyBlockScopeFunctionStatements in the parser_zone_ to avoid a
use-after-free. Scope fixup code may end up updating something which
is thrown away, but this is a small cost and much simpler than
removing dead hashtable entries later.
R=adamk
LOG=Y
BUG=chromium:537816
Review URL: https://codereview.chromium.org/1564923007
Cr-Commit-Position: refs/heads/master@{#33185}
Adds support for calling eval to the interpreter.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1508293003
Cr-Commit-Position: refs/heads/master@{#33184}
The reason is same as the CL #31808 (issue 1430943002, X87: Change the test case for X87 float operations), please refer: https://codereview.chromium.org/1430943002/
Here is the key comments from CL #31808
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function, those inlined functions has different behavior comparing with GCC ia32 build and x87 build.
The major difference is sse float register still has single precision rounding semantic. While X87 register has no such rounding precsion semantic when directly use register value.
The V8 turbofan JITTed has exactly same result in both X87 and IA32 port.
So we add the following sentence to do type case to keep the same precision for Run_WasmCall_Float32Sub.
Such as: volatile float expect = *i +/- *j; // *i +/- *j, etc.
BUG=
Review URL: https://codereview.chromium.org/1561023002
Cr-Commit-Position: refs/heads/master@{#33143}
Several ports to enable r6 compact branch optimizations on MIPS64
Port 3573d3cb58
Original commit message:
MIPS: r6 compact branch optimization.
Port bddf8c9e08
Original commit message:
MIPS: Fix trampoline pool handling in MacroAssembler::BranchShort()
Port 6993cd0de5
Original commit message:
MIPS: Fix 'MIPS:r6 compact branch optimization.'
Jic and jialc compact branch ops are fixed as they does
not have 'forbidden slot' restriction. Also COP1 branches
(CTI instructions) added to IsForbiddenAfterBranchInstr().
Port bb332195d3
Original commit message:
MIPS: Fix trampoline pool handling in MacroAssembler::BranchShort()
Port c91bcf7192
Original commit message:
MIPS: Fix trampoline pool handling in MacroAssembler::BranchShort()
for r6.
BUG=
Review URL: https://codereview.chromium.org/1534183002
Cr-Commit-Position: refs/heads/master@{#33136}
Work around ppc assembler use of Mul, Div macros.
Disable several tests that fail for nosse4.
Disable several tests that fail for msan.
BUG=
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1562513002
Cr-Commit-Position: refs/heads/master@{#33126}
This increases the size of addressable constant pool entries for jumps
to match other bytecodes using operands indexing the constant pool.
This change also introduces reservations for constant pool entries.
Reservations are used for forward jumps to ensure a constant pool entry
will be available when the jump target (label) is bound and the jump is
patched up in the bytecode array.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1546683002
Cr-Commit-Position: refs/heads/master@{#33125}
New bytecodes for making registers with indicies wider than 1-byte
accessible.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1555713002
Cr-Commit-Position: refs/heads/master@{#33091}
After this change (https://codereview.chromium.org/1507903004) to type feedback
vector, wide bytecodes for global/keyed/named load-stores were not generated due
to a change in the number of type feedback vector slots. This cl fixes tests to
generate wide bytecodes.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1546923002
Cr-Commit-Position: refs/heads/master@{#33076}
Adds support for loads and stores to lookup slots to BytecodeGraphBuilder.
Also adds tests for them.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1541143003
Cr-Commit-Position: refs/heads/master@{#33075}
Use the same mechanism that is already available for Crankshaft to not
leak all kinds of things in TurboFan generated code. Long-term we will
support weakness in a better way, but for now, just use the
infrastructure that is already in place to avoid memory leaks via
TurboFan generated code.
R=jarin@chromium.org, ulan@chromium.org
Review URL: https://codereview.chromium.org/1555743003
Cr-Commit-Position: refs/heads/master@{#33073}
According to the ES2015 specification, bound functions are exotic
objects, and thus don't need to be implemented as JSFunctions. So
we introduce a new JSBoundFunction type to represent bound functions
and make them optimizable. This already improves the performance of
calling or constructing bound functions by 10-100x depending on the
use case because we avoid the crazy dance between JavaScript and C++
that was implemented in v8natives.js previously.
There's still room for improvement in the performance of actually
creating bound functions, which is also relevant in practice, but
we already have a plan how to accomplish that later.
The mips/mips64 ports were contributed by akos.palfi@imgtec.com.
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
BUG=chromium:535408, chromium:571299, v8:4629
LOG=n
Committed: https://crrev.com/ca8623eaa468cba65a5adafcdfb4615966f43ce2
Cr-Commit-Position: refs/heads/master@{#33042}
Review URL: https://codereview.chromium.org/1542963002
Cr-Commit-Position: refs/heads/master@{#33044}
Reason for revert:
Breaks arm64 sim nosnap: https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20arm64%20-%20sim%20-%20nosnap%20-%20debug/builds/805/steps/Check/logs/function-bind
Original issue's description:
> [runtime] Introduce dedicated JSBoundFunction to represent bound functions.
>
> According to the ES2015 specification, bound functions are exotic
> objects, and thus don't need to be implemented as JSFunctions. So
> we introduce a new JSBoundFunction type to represent bound functions
> and make them optimizable. This already improves the performance of
> calling or constructing bound functions by 10-100x depending on the
> use case because we avoid the crazy dance between JavaScript and C++
> that was implemented in v8natives.js previously.
>
> There's still room for improvement in the performance of actually
> creating bound functions, which is also relevant in practice, but
> we already have a plan how to accomplish that later.
>
> The mips/mips64 ports were contributed by akos.palfi@imgtec.com.
>
> CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
> BUG=chromium:535408, chromium:571299, v8:4629
> LOG=n
>
> Committed: https://crrev.com/ca8623eaa468cba65a5adafcdfb4615966f43ce2
> Cr-Commit-Position: refs/heads/master@{#33042}
TBR=cbruni@chromium.org,hpayer@chromium.org,yangguo@chromium.org,akos.palfi@imgtec.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:535408, chromium:571299, v8:4629
Review URL: https://codereview.chromium.org/1552473002
Cr-Commit-Position: refs/heads/master@{#33043}
According to the ES2015 specification, bound functions are exotic
objects, and thus don't need to be implemented as JSFunctions. So
we introduce a new JSBoundFunction type to represent bound functions
and make them optimizable. This already improves the performance of
calling or constructing bound functions by 10-100x depending on the
use case because we avoid the crazy dance between JavaScript and C++
that was implemented in v8natives.js previously.
There's still room for improvement in the performance of actually
creating bound functions, which is also relevant in practice, but
we already have a plan how to accomplish that later.
The mips/mips64 ports were contributed by akos.palfi@imgtec.com.
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
BUG=chromium:535408, chromium:571299, v8:4629
LOG=n
Review URL: https://codereview.chromium.org/1542963002
Cr-Commit-Position: refs/heads/master@{#33042}
Per request in https://codereview.chromium.org/1047213002/
These files will continue to have a lot of churn in next two months
as we finish support for MIPS r6 instruction set. When things settle
down, we will do a clang-format --full to clean them up. For now,
we'd prefer to be able to do easy diffs, and will do incremental
re-formats as we make changes.
BUG=
Review URL: https://codereview.chromium.org/1546973003
Cr-Commit-Position: refs/heads/master@{#33038}
We'll be able to optimize rest parameters in TurboFan similarly to the arguments array. This CL restores the previous behavior, and a follow-on will enable TurboFan optimization.
(TBR for rossberg since we discussed the revert beforehand. The only changes are a few lines related to tests and rebasing.)
TBR=rossberg@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1537683002
Cr-Commit-Position: refs/heads/master@{#33024}
Changes LoadGlobal, StoreGlobal, LoadNamedProperty, and StoreNamedProperty to accept
the name of variable instead of index into the constant pool entry. Also made
GetConstantPoolEntry as a private function since it is no longer used outside of
BytecodeArrayBuilder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1546643002
Cr-Commit-Position: refs/heads/master@{#33020}
Adds support for deleting a variable in a lookup slot. Adds a new bytecode,
its implementation and tests. Also adds support for this bytecode to the
bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1542083002
Cr-Commit-Position: refs/heads/master@{#33019}
Add API-accessors for [[ProxyTarget]], [[ProxyHandler]]. Additionally
create new proxies and revoke proxies via the API.
BUG=v8:1543
LOG=n
Review URL: https://codereview.chromium.org/1542943002
Cr-Commit-Position: refs/heads/master@{#33013}
Consecutive registers are allocated in two passes. First we "reserve"
a set of registers and these get allocated when we actually use them.
If we request for a temporary register before we use all the consecutive
registers, the earlier implementation does not gaurantee that it allocates
outside the reservation for consecutive registers. This could cause problems
for example, in call_func(a, b++, c). This cl fixes
TemporaryRegisterScope::NewRegister, to return a new temporary register
outside the reservation for consecutive registers.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1531273002
Cr-Commit-Position: refs/heads/master@{#33005}
Adds implementation and tests for CreateMappedArguments and
CreateUnmappedArguments to bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1490283003
Cr-Commit-Position: refs/heads/master@{#33004}
Unexpectedly, websites depend on doing feature testing with
RegExp.prototype.sticky and browser testing with RegExp.prototype.toString().
ES2015 newly throws exceptions for both of these. In order to enable shipping
new ES2015 semantics, this patch puts in narrow workarounds for those two
cases, keeping their old behavior. UseCounters are added for how often
those particular cases come up, so we can see if it can be deprecated.
This reland replaces problematic legacy const usage with var, to
avoid issues with nosnap builds.
R=yangguo
CC=bmeurer
BUG=v8:4637,v8:4617
LOG=Y
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
Review URL: https://codereview.chromium.org/1545633002
Cr-Commit-Position: refs/heads/master@{#33002}
Reason for revert:
Breaks nosnap: http://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20nosnap/builds/5883
Original issue's description:
> Add web compat workarounds for ES2015 RegExp semantics
>
> Unexpectedly, websites depend on doing feature testing with
> RegExp.prototype.sticky and browser testing with RegExp.prototype.toString().
> ES2015 newly throws exceptions for both of these. In order to enable shipping
> new ES2015 semantics, this patch puts in narrow workarounds for those two
> cases, keeping their old behavior. UseCounters are added for how often
> those particular cases come up, so we can see if it can be deprecated.
>
> R=yangguo
> BUG=v8:4637,v8:4617
> LOG=Y
> CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
>
> Committed: https://crrev.com/98f819c3e0c92d54a306cdacadda73cf96d21b52
> Cr-Commit-Position: refs/heads/master@{#32997}
TBR=yangguo@google.com,yangguo@chromium.org,littledan@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4637,v8:4617
Review URL: https://codereview.chromium.org/1546493003
Cr-Commit-Position: refs/heads/master@{#32999}
Unexpectedly, websites depend on doing feature testing with
RegExp.prototype.sticky and browser testing with RegExp.prototype.toString().
ES2015 newly throws exceptions for both of these. In order to enable shipping
new ES2015 semantics, this patch puts in narrow workarounds for those two
cases, keeping their old behavior. UseCounters are added for how often
those particular cases come up, so we can see if it can be deprecated.
R=yangguo
BUG=v8:4637,v8:4617
LOG=Y
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
Review URL: https://codereview.chromium.org/1543723002
Cr-Commit-Position: refs/heads/master@{#32997}
The CL #32908 (https://codereview.chromium.org/1526293002) updated the Float64 test data and cause the RunFloat64Add and RunFloat64Sub test cases failed.
The reason is same as the CL #31808 (issue 1430943002, X87: Change the test case for X87 float operations), please refer: https://codereview.chromium.org/1430943002/
Here is the key comments from CL #31808
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function,
those inlined functions has different behavior comparing with GCC ia32 build and x87 build.
The major difference is sse float register still has single precision rounding semantic. While X87 register has no such rounding precsion semantic when directly use register value.
The V8 turbofan JITTed has exactly same result in both X87 and IA32 port.
So we add the following sentence to do type case to keep the same precision for RunFloat64Add and RunFloat64Sub.
Such as: volatile double expect = *i +/- *j; // *i +/- *j, etc.
BUG=
Review URL: https://codereview.chromium.org/1533593003
Cr-Commit-Position: refs/heads/master@{#32988}
A pre-requisite for this change was changing the interpreter to use
Runtime::ForInStep to bring the interpreter implementation closer
to the turbofan implementation. Also required to flatten out the
cache parameters into the interpreter frame for de-opt.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1531693002
Cr-Commit-Position: refs/heads/master@{#32986}
The new implementation detects if the input value is outside i32 range
and traps it that case.
The range check is done as follows:
The input value is converted to int32 and then back to float. If the
result is the same as the truncated input value, then the input value
is within int32 range.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1537393003
Cr-Commit-Position: refs/heads/master@{#32984}
After Cvt_d_uw macro, upper 32 bits of the output remain
unitnitialized which caused flaky failures on some tests on
MIPS32R6
TEST=cctest/test-assembler-mips/MIPS13,mjsunit/asm/int32-umod
BUG=
Review URL: https://codereview.chromium.org/1537973002
Cr-Commit-Position: refs/heads/master@{#32983}
