Introduces fused bytecodes for fusing LdaSmi followed by a binary op bytecode.
The chosen bytecodes are used frequently in Octane: AddSmi, SubSmi,
BitwiseOrSmi, BitwiseAndSmi, ShiftLeftSmi, ShiftRightSmi.
There are additional code stubs for these operations that are biased towards
both the left hand and right hand operands being Smis.
BUG=v8:4280
LOG=N
Review-Url: https://codereview.chromium.org/2111923002
Cr-Commit-Position: refs/heads/master@{#37531}
The dependency would only happen if we have a smi overflow for the length and
have create a heap number. In this case the heap number would've to survive
until the array buffer is collected.
To avoid this dependency we track the length (as we previously used to).
BUG=chromium:625748,chromium:625752
LOG=N
TEST=test/mjsunit/regress/regress-625752.js
R=hpayer@chromium.org
Review-Url: https://codereview.chromium.org/2122603004
Cr-Commit-Position: refs/heads/master@{#37530}
This adds a new optimization phase to the TurboFan pipeline, which walks
over the effect chain and tries to eliminate redundant loads (and even
some stores) of object fields. We currently ignore element access, but
that will probably need to be handled as well at some point. We also
don't have any special treatment to properly track object maps, which is
also on the list of things that will happen afterwards.
The implementation is pretty simple currently, and probably way to
inefficient. It's meant to be a proof-of-concept to iterate on.
R=jarin@chromium.org
BUG=v8:4930,v8:5141
Review-Url: https://codereview.chromium.org/2120253002
Cr-Commit-Position: refs/heads/master@{#37528}
This just removes some left-overs from when the {JSTypedLoweringTest}
covered strong mode and an iteration over all language modes was used
for testing all binary operations. The language mode in question has
been removed since then.
R=bmeurer@chromium.org
Review-Url: https://codereview.chromium.org/2121113002
Cr-Commit-Position: refs/heads/master@{#37526}
This removes the frame state input representing the before-state from
nodes having the {JSAdd} or the {JSSubtract} operator. Lowering that
inserts number conversions of the inputs has to be disabled when
deoptimization is enabled, because the frame state layout is no longer
known.
R=jarin@chromium.org
BUG=v8:5021
Review-Url: https://codereview.chromium.org/2125593002
Cr-Commit-Position: refs/heads/master@{#37522}
This drops the %_ValueOf intrinsic, but keeps the runtime entry
%ValueOf for now, by either migrating the functionality (mostly
Debug mirror or toString/valueOf methods) to C++ or TurboFan
builtins, or switching to the %ValueOf runtime call when it's
not performance critical anyways.
The %_ValueOf intrinsic was one of the last blockers for fixing
the unsound machine operator typing in TurboFan.
R=yangguo@chromium.org
BUG=v8:5049
Committed: https://crrev.com/293bd7882987f00e465710ce468bfb1eaa7d3fa2
Review-Url: https://codereview.chromium.org/2126453002
Cr-Original-Commit-Position: refs/heads/master@{#37512}
Cr-Commit-Position: refs/heads/master@{#37519}
The Number.parseInt (and therefore the parseInt function on the global
object) are often used instead of Math.floor or just plain int32
truncation, and we can easily recognize those cases and provide a fast
path in TurboFan.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2125583002
Cr-Commit-Position: refs/heads/master@{#37518}
This removes the frame state input representing the before-state from
nodes having the {JSMultiply} operator. Lowering that inserts number
conversions of the inputs has to be disabled when deoptimization is
enabled, because the frame state layout is no longer known.
R=jarin@chromium.org
BUG=v8:5021
Review-Url: https://codereview.chromium.org/2111193002
Cr-Commit-Position: refs/heads/master@{#37517}
The reason:
same as the CL #37371 (Issue 2111493002: X87: disable some sin/cos/expm1/tan test cases for x87.), please
refer https://codereview.chromium.org/2111493002 for more details.
For Acosh/ASinh test cases, the expected values are pre-defined double precision values, the results
generated by C++ function are extended double precision as the extended double precision is default for x87
Gcc compiler and std lib on linux platform. The comparison of different precisons caused some of those test
cases failed.
This CL disables Acosh/ASinh test cases for x87.
BUG=
Review-Url: https://codereview.chromium.org/2122593002
Cr-Commit-Position: refs/heads/master@{#37516}
The reason:
In CreateRandomOperand(), It used the register index 1 for ExplicitOperand(LocationOperand::REGISTER, rep,
GetRegisterCode(rep, 1)).
For x87 turbofan compiler, there's only 1 allocatable Float/Double register, i.e.: register index 0. the
GetRegisterCode(rep, 1) in ExplicitOperand() always return false when rep is MachineRepresentation::kFloat32/kFloat64.
It caused the test-gap-resolver/FuzzResolver failed at DCHECK_IMPLIES(kind == REGISTER && rep == MachineRepresentation::kFloat32,
FloatRegister::from_code(index).IsAllocatable(RegisterConfiguration::TURBOFAN)), src/compiler/instruction.cc, line 259, under
debug mode.
This CL disable test-gap-resolver/FuzzResolver test case for x87.
BUG=
Review-Url: https://codereview.chromium.org/2120203002
Cr-Commit-Position: refs/heads/master@{#37515}
Reason for revert:
[Sheriff] Breaks without i18n:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20noi18n%20-%20debug/builds/8466
Original issue's description:
> [intrinsic] Drop the %_ValueOf intrinsic.
>
> This drops the %_ValueOf intrinsic, but keeps the runtime entry
> %ValueOf for now, by either migrating the functionality (mostly
> Debug mirror or toString/valueOf methods) to C++ or TurboFan
> builtins, or switching to the %ValueOf runtime call when it's
> not performance critical anyways.
>
> The %_ValueOf intrinsic was one of the last blockers for fixing
> the unsound machine operator typing in TurboFan.
>
> R=yangguo@chromium.org
> BUG=v8:5049
>
> Committed: https://crrev.com/293bd7882987f00e465710ce468bfb1eaa7d3fa2
> Cr-Commit-Position: refs/heads/master@{#37512}
TBR=yangguo@chromium.org,bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5049
Review-Url: https://codereview.chromium.org/2117273002
Cr-Commit-Position: refs/heads/master@{#37514}
This concerns formatting of calls to, e.g., Math.acos in stack traces,
in which the receiver is an object with an attached toString tag. If
such a tag exists, use it to format the receiver typename to ensure that
the stack trace includes 'Math.acos' instead of 'Object.acos'.
R=yangguo@chromium.org
BUG=
Review-Url: https://codereview.chromium.org/2110683007
Cr-Commit-Position: refs/heads/master@{#37513}
This drops the %_ValueOf intrinsic, but keeps the runtime entry
%ValueOf for now, by either migrating the functionality (mostly
Debug mirror or toString/valueOf methods) to C++ or TurboFan
builtins, or switching to the %ValueOf runtime call when it's
not performance critical anyways.
The %_ValueOf intrinsic was one of the last blockers for fixing
the unsound machine operator typing in TurboFan.
R=yangguo@chromium.org
BUG=v8:5049
Review-Url: https://codereview.chromium.org/2126453002
Cr-Commit-Position: refs/heads/master@{#37512}
Currently there are two logic in Ticker, one is to try to request a
pre-allocated TickSample from CpuProfiler and then initialize it, and if the
request fails, it will initialize a local TickSample. The other is it will pass
an initialized TickSample to Profiler to log into v8.log.
This patch splits Ticker into two samplers, the first one remains in log.cc to
collect samples and pass to Profiler for logging, the second one will be called
by ProfilerEventsProcessor, and only use the circular queue only.
BUG=v8:4789
LOG=N
Review-Url: https://codereview.chromium.org/2108393002
Cr-Commit-Position: refs/heads/master@{#37506}
Stack trace generation requires access to the receiver; and while the
receiver is already on the stack, we cannot determine its position
during stack trace generation (it's stored in argv[0], and argc is only
stored in a callee-saved register).
This patch grants access to the receiver by pushing argc onto builtin
exit frames as an extra argument. Compared to simply pushing the
receiver, this requires an additional dereference during stack trace
generation, but one fewer during builtin calls.
BUG=v8:4815
Review-Url: https://codereview.chromium.org/2106883003
Cr-Commit-Position: refs/heads/master@{#37500}
The re-typer now only types a node if its inputs are all typed with the
exception of phi nodes. This works because all cycles in the graph have
to contain a phi node.
BUG=chromium:625558
Review-Url: https://codereview.chromium.org/2120243002
Cr-Commit-Position: refs/heads/master@{#37493}
This patch implements "immutable prototype exotic objects" from the ECMAScript
spec, which are objects whose __proto__ cannot be changed, but are not otherwise
frozen. They are introduced in order to prevent a Proxy from being introduced
to the prototype chain of the global object.
The API is extended by a SetImmutablePrototype() call in ObjectTemplate, which
can be used to vend new immutable prototype objects. Additionally, Object.prototype
is an immutable prototype object.
In the implementation, a new bit is added to Maps to say whether the prototype is
immutable, which is read by SetPrototype. Map transitions to the immutable prototype
state are not saved in the transition tree because the main use case is just for
the prototype chain of the global object, which there will be only one of per
Context, so no need to take up the extra word for a pointer in each full transition
tree.
BUG=v8:5149
Review-Url: https://codereview.chromium.org/2108203002
Cr-Commit-Position: refs/heads/master@{#37482}
This makes the elimination of checkpoints flowing effect-wise into nodes
having the {Return} operator more permissive. We can cut out checkpoints
even when they are not wholly owned by the return. This also alleviates
a problem where TCO no longer applies.
R=jarin@chromium.org
TEST=mjsunit/regress/regress-crbug-624747
BUG=chromium:624747
Review-Url: https://codereview.chromium.org/2118793002
Cr-Commit-Position: refs/heads/master@{#37480}
This optimizes the passing of stack parameters in function calls.
For some architectures (ia32/x64), using pushes when possible instead
of bumping the stack and then storing parameters generates much
smaller code, and in some cases is faster (e.g. when a push of a memory
location can implement a memory-to-memory copy and thus elide an
intermediate load. On others (e.g. ARM), the benefit is smaller, where
it's only possible to elide direct stack pointer adjustment in certain cases
or combine multiple register stores into a single instruction in other limited
situations. On yet other platforms (ARM64, MIPS), there are no push instructions,
and this optimization isn't used at all.
Ideally, this mechanism would be used for both tail calls and normal calls,
but "normal" calls are currently pretty efficient, and tail calls are very
inefficient, so this CL sets the bar low for building a new mechanism to
handle parameter pushing that only needs to raise the bar on tail calls for now.
The key aspect of this change is that adjustment to the stack pointer
for tail calls (and perhaps later real calls) is an explicit step separate from
instruction selection and gap resolution, but aware of both, making it possible
to safely recognize gap moves that are actually pushes.
Review-Url: https://codereview.chromium.org/2082263002
Cr-Commit-Position: refs/heads/master@{#37477}
Import fdlibm versions of acos, acosh, asin and asinh, which are more
precise and produce the same result across platforms (we were using
libm versions for asin and acos so far, where both speed and precision
depended on the operating system so far). Introduce appropriate TurboFan
operators for these functions and use them both for inlining and for the
generic builtin.
Also migrate the Math.imul and Math.fround builtins to TurboFan builtins
to ensure that their behavior is always exactly the same as the inlined
TurboFan version (i.e. C++ truncation semantics for double to float
don't necessarily meet the JavaScript semantics).
For completeness, also migrate Math.sign, which can even get some nice
love in TurboFan.
Drive-by-fix: Some alpha-sorting on the Math related functions, and
cleanup the list of Math intrinsics that we have to export via the
native context currently.
BUG=v8:3266,v8:3496,v8:3509,v8:3952,v8:5169,v8:5170,v8:5171,v8:5172
TBR=rossberg@chromium.orgR=franzih@chromium.org
Review-Url: https://codereview.chromium.org/2116753002
Cr-Commit-Position: refs/heads/master@{#37476}
This ensures no eager bailout point is emitted after a comma expression
in test context where the right-hand side omitted an eager bailout point
as well. This is to stay in sync with full-codegen.
R=jarin@chromium.org
TEST=mjsunit/regress/regress-crbug-624919
BUG=chromium:624919
Review-Url: https://codereview.chromium.org/2113893004
Cr-Commit-Position: refs/heads/master@{#37475}
port 588e15c034 (r37345)
original commit message:
The opcodes for 'cmpw r/m16, r16' and 'cmpw r16, r/m16' were swapped, causing a few issues when less than/greater than comparison were performed.
Adds a regression test.
BUG=
Review-Url: https://codereview.chromium.org/2119793002
Cr-Commit-Position: refs/heads/master@{#37469}
Reason for revert:
Fuzzer claims `try { \"\" ; } catch(x) { let x1 = [1,,], x = x; }` causes a crash.
Original issue's description:
> Add errors for declarations which conflict with catch parameters.
>
> Catch parameters are largely treated as lexical declarations in the
> block which contains their body for the purposes of early syntax errors,
> with some exceptions outlined in B.3.5. This patch introduces most of
> those errors, except those from `eval('for (var e of ...);')` inside of
> a catch with a simple parameter named 'e'.
>
> Note that annex B.3.5 allows var declarations to conflict with simple
> catch parameters, except when the variable declaration is the init of a
> for-of statement.
>
> BUG=v8:5112,v8:4231
>
> Committed: https://crrev.com/2907c726b2bb5cf20b2bec639ca9e6a521585406
> Cr-Commit-Position: refs/heads/master@{#37462}
TBR=littledan@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:5112,v8:4231
Review-Url: https://codereview.chromium.org/2112223002
Cr-Commit-Position: refs/heads/master@{#37464}
Catch parameters are largely treated as lexical declarations in the
block which contains their body for the purposes of early syntax errors,
with some exceptions outlined in B.3.5. This patch introduces most of
those errors, except those from `eval('for (var e of ...);')` inside of
a catch with a simple parameter named 'e'.
Note that annex B.3.5 allows var declarations to conflict with simple
catch parameters, except when the variable declaration is the init of a
for-of statement.
BUG=v8:5112,v8:4231
Review-Url: https://codereview.chromium.org/2109733003
Cr-Commit-Position: refs/heads/master@{#37462}
AddBoundMethod, in i18n.js, returns functions all of which share the
same backing SharedFunctionInfo, which means that its calls to
InstallGetter were causing all such functions to have a single name
(that of the last caller, "get breakType").
This patch skips calling InstallGetter and instead directly calls
%DefineGetterPropertyUnchecked, which itself sets the name property
on the JSFunction instance (it knows how to do this in order to handle
getters that have computed property names).
Also takes care of a TODO having to do with the inner boundMethod:
its name is now made empty, by using a new macro that gets around
ES2015's function name inference.
Finally, removes a redundant %FunctionRemovePrototype: arrow functions
have no prototypes to begin with.
R=littledan@chromium.org
BUG=v8:4778
Review-Url: https://codereview.chromium.org/2109223002
Cr-Commit-Position: refs/heads/master@{#37459}
This turns the blacklist back into a white-list adding all binary operations as allowed operations. The one known fix is that it forces canonicalization of the double-hole as double constant.
BUG=chromium:621147
Review-Url: https://codereview.chromium.org/2106393002
Cr-Commit-Position: refs/heads/master@{#37452}
Reason for revert:
Found to break SAP Web IDE, and these semantics are not shipped in any other browser.
Revert to legacy semantics while assessing web compatibility.
BUG=chromium:624318
Original issue's description:
> Put RegExp js code in strict mode
>
> src/js/regexp.js was one of the few files that was left in sloppy
> mode. The ES2017 draft specification requires that writes to
> lastIndex throw when the property is non-writable, and test262
> tests enforce this behavior. This patch puts that file in strict
> mode.
>
> BUG=v8:4504
> R=yangguo@chromium.org
> LOG=Y
>
> Committed: https://crrev.com/80b1b2a45bbd9bf3d08e4e6516acfaaa8f438213
> Cr-Commit-Position: refs/heads/master@{#34801}
TBR=yangguo@chromium.org,adamk@chromium.org
Review-Url: https://codereview.chromium.org/2112713003
Cr-Commit-Position: refs/heads/master@{#37449}
In the current implementation of wasm an unrepresentable input of the
float32-to-int32 conversion is detected by first truncating the input, then
converting the truncated input to int32 and back to float32, and then checking
whether the result is the same as the truncated input.
This input check does not work on arm and arm64 for an input of (INT32_MAX + 1)
because on these platforms the float32-to-int32 conversion results in INT32_MAX
if the input is greater than INT32_MAX. When INT32_MAX is converted back to
float32, then the result is (INT32_MAX + 1) again because INT32_MAX cannot be
represented precisely as float32, and rounding-to-nearest results in (INT32_MAX
+ 1). Since (INT32_MAX + 1) equals the truncated input value, the input appears
to be representable.
With the changes in this CL, the result of the float32-to-int32 conversion is
incremented by 1 if the original result was INT32_MAX. Thereby the detection of
unrepresenable inputs in wasm works. Note that since INT32_MAX cannot be
represented precisely in float32, it can also never be a valid result of the
float32-to-int32 conversion.
@v8-mips-ports, can you do a similar implementation for mips?
R=titzer@chromium.org, Rodolph.Perfetta@arm.com
Review-Url: https://codereview.chromium.org/2105313002
Cr-Commit-Position: refs/heads/master@{#37448}
-Defines SIMD128_REGISTERS for all platforms.
-Adds Simd128 register information to RegisterConfiguration, and implements
aliasing calculations.
LOG=N
BUG=v8:4124
Review-Url: https://codereview.chromium.org/2092103004
Cr-Commit-Position: refs/heads/master@{#37437}
Like the other Math builtins, Math.abs() is now a TurboFan builtin.
It uses RawMachineAssembler::Float64Abs().
R=bmeurer@chromium.org
BUG=v8:5163, v8:5086
LOG=N
Review-Url: https://codereview.chromium.org/2115493002
Cr-Commit-Position: refs/heads/master@{#37433}
This stores the wasm object and the function index in the script, and
adds functions to get the disassembled wasm code as well as the offset
table mapping from byte position to line and column in the disassembly
solely from the script.
This will be used to show "ui source code" in DevTools, and map raw
locations from the stack trace into this code view.
R=yangguo@chromium.org, ahaas@chromium.org, titzer@chromium.org
BUG=chromium:613110
patch from issue 2063013004 at patchset 80001 (http://crrev.com/2063013004#ps80001)
Review-Url: https://codereview.chromium.org/2105303002
Cr-Commit-Position: refs/heads/master@{#37430}
