The function literal consists of a list of statements. Each statement
is associated with a statement position including break location. The
only exception to this rule is when the function immediately throws if
scope resolution found an illegal redeclaration. Make sure that we add a
break location for this case as well. The debugger relies on this.
R=bmeurer@chromium.org, vogelheim@chromium.org
BUG=v8:4690
LOG=N
Review URL: https://codereview.chromium.org/1759603002
Cr-Commit-Position: refs/heads/master@{#34422}
Similar to fullcodegen, Ignition now also marks a for-in statement as
slow (via the TypeFeedbackVector) when we have to call %ForInFilter,
i.e. we either have no enumeration cache or the receiver map changes
during an iteration of the for-in map.
R=mstarzinger@chromium.org
BUG=v8:3650
LOG=n
Review URL: https://codereview.chromium.org/1755563002
Cr-Commit-Position: refs/heads/master@{#34391}
We used to emit debug break location on block entry. This cannot be
ported to the interpreted as we do not emit bytecode for block entry.
This made no sense to begin with though, but accidentally added
break locations for var declarations.
With this change, the debugger no longer breaks at var declarations
without initialization. This is in accordance with the fact that the
interpreter does not emit bytecode for uninitialized var declarations.
Also fix the bytecode to match full-codegen's behavior wrt return
positions:
- there is a break location before the return statement, with the source
position of the return statement.
- right before the actual return, there is another break location. The
source position points to the end of the function.
R=rmcilroy@chromium.org, vogelheim@chromium.orgTBR=rossberg@chromium.org
BUG=v8:4690
LOG=N
Review URL: https://codereview.chromium.org/1744123003
Cr-Commit-Position: refs/heads/master@{#34388}
Reason for revert:
It is not a good idea to call CallICStub from the builtin. It might be sensitive to the frame structure. Constructing a internal frame might cause problems. It is much better to inline the code related to the type feedback vector into the builtin.
Original issue's description:
> [Interpreter] Implements calls through CallICStub in the interpreter.
>
> Calls are implemented through CallICStub to collect type feedback. Adds
> a new builtin called InterpreterPushArgsAndCallIC that pushes the
> arguments onto stack and calls CallICStub.
>
> Also adds two new bytecodes CallIC and CallICWide to indicate calls have to
> go through CallICStub.
>
> MIPS port contributed by balazs.kilvady.
>
> BUG=v8:4280, v8:4680
> LOG=N
>
> Committed: https://crrev.com/20362a2214c11a0f2ea5141b6a79e09458939cec
> Cr-Commit-Position: refs/heads/master@{#34244}
TBR=rmcilroy@chromium.org,mvstanton@chromium.org,mstarzinger@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280, v8:4680
Review URL: https://codereview.chromium.org/1731253003
Cr-Commit-Position: refs/heads/master@{#34252}
Calls are implemented through CallICStub to collect type feedback. Adds
a new builtin called InterpreterPushArgsAndCallIC that pushes the
arguments onto stack and calls CallICStub.
Also adds two new bytecodes CallIC and CallICWide to indicate calls have to
go through CallICStub.
MIPS port contributed by balazs.kilvady.
BUG=v8:4280, v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1688283003
Cr-Commit-Position: refs/heads/master@{#34244}
This CL introduces two new bytecodes TailCall and TailCallWide.
BUG=v8:4698,v8:4687
LOG=N
Review URL: https://codereview.chromium.org/1698273003
Cr-Commit-Position: refs/heads/master@{#34083}
Adds support for ES6 super keyword and performing loads, stores, and
calls to super class members.
Implements SetHomeObject and enables ThisFunctionVariable.
BUG=v8:4280,v8:4682
LOG=N
Review URL: https://codereview.chromium.org/1689573004
Cr-Commit-Position: refs/heads/master@{#33977}
Adds JumpIfNotHoleConstant and JumpIfNotHoleConstantWide bytecodes
and removes JumpIfHole bytecode.
In situations with large numbers of constants, the generator would
fail because an 8-bit constant could not be reserved for
JumpIfHole/JumpIfNotHole and so a 16-bit constant would be reserved.
Then when patching the bytecode the patcher would discover there was
no wide constant variant of the emitted jump.
BUG=v8:4280,v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1697473002
Cr-Commit-Position: refs/heads/master@{#33952}
This replaces the bytecode in question with a runtime call within the
bytecode stream. The tradeoff is to safe one bytecode opcode for more
expensive encoding of lookup slot deletion.
R=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1690913002
Cr-Commit-Position: refs/heads/master@{#33907}
This allows us to remove the somewhat awkward BuildLoadObjectField
from the BytecodeGraphBuilder and also allows us to simplify the
bytecode stream for class literals.
R=oth@chromium.org
Review URL: https://codereview.chromium.org/1678103002
Cr-Commit-Position: refs/heads/master@{#33820}
Adds implementation and tests to support const/let variables in the
interpreter.
BUG=v8:4280,v8:4679
LOG=N
Review URL: https://codereview.chromium.org/1634153002
Cr-Commit-Position: refs/heads/master@{#33819}
Replace the somewhat awkward RestParamAccessStub, which would always
call into the runtime anyway with a proper FastNewRestParameterStub,
which is basically based on the code that was already there for strict
arguments object materialization. But for rest parameters we could
optimize even further (leading to 8-10x improvements for functions with
rest parameters), by fixing the internal formal parameter count:
Every SharedFunctionInfo has a formal_parameter_count field, which
specifies the number of formal parameters, and is used to decide whether
we need to create an arguments adaptor frame when calling a function
(i.e. if there's a mismatch between the actual and expected parameters).
Previously the formal_parameter_count included the rest parameter, which
was sort of unfortunate, as that meant that calling a function with only
the non-rest parameters still required an arguments adaptor (plus some
other oddities). Now with this CL we fix, so that we do no longer
include the rest parameter in that count. Thereby checking for rest
parameters is very efficient, as we only need to check whether there is
an arguments adaptor frame, and if not create an empty array, otherwise
check whether the arguments adaptor frame has more parameters than
specified by the formal_parameter_count.
The FastNewRestParameterStub is written in a way that it can be directly
used by Ignition as well, and with some tweaks to the TurboFan backends
and the CodeStubAssembler, we should be able to rewrite it as
TurboFanCodeStub in the near future.
Drive-by-fix: Refactor and unify the CreateArgumentsType which was
different in TurboFan and Ignition; now we have a single enum class
which is used in both TurboFan and Ignition.
R=jarin@chromium.org, rmcilroy@chromium.orgTBR=rossberg@chromium.org
BUG=v8:2159
LOG=n
Review URL: https://codereview.chromium.org/1676883002
Cr-Commit-Position: refs/heads/master@{#33809}
Moves the stack check from the function entry trampoline to instead be
after function activation using an explicit StackCheck bytecode. Also
add stack checks on back edges of loops.
BUG=v8:4280,v8:4678
LOG=N
Review URL: https://codereview.chromium.org/1665853002
Cr-Commit-Position: refs/heads/master@{#33730}
Unifies the meaning of kRegCount8 and kRegCount16 across bytecodes.
Call and CallJSRuntime had a slightly different use of the register
count operand. From this change forth, register count operands are
always based off of the previous register operand.
BUG=v8:4280,v8:4675
LOG=N
Review URL: https://codereview.chromium.org/1659023002
Cr-Commit-Position: refs/heads/master@{#33707}
Moves the temporary register allocator out of the bytecode array
builder into TemporaryRegisterAllocator class and adds unittests.
Particular must be taken around the translation window boundary
motivating the addition of tests.
Also adds a Clear() method to IdentityMap() which is called by
the destructor. This allows classes to hold an IdentityMap if
they are zone allocated. Classes must call Clear() before the zone
is re-cycled or face v8 heap corruption.
BUG=v8:4280,v8:4675
LOG=N
Review URL: https://codereview.chromium.org/1651133002
Cr-Commit-Position: refs/heads/master@{#33686}
Introduces the concept of transfer direction to register operands. This
enables the register translator to emit exactly the moves that a
bytecode having it's register operands translated needs.
BUG=v8:4280,v8:4675
LOG=N
Review URL: https://codereview.chromium.org/1633153002
Cr-Commit-Position: refs/heads/master@{#33544}
This increases the size of register operands to be 16-bit.
Not all bytecodes have wide register variants, so when they are
needed a register translator will copy them into a small area
reserved at the top of the 8-bit register range and these registers
are supplied as arguments to the bytecode with 8-bit operands.
This is non-intrusive for typical bytecode where the number of
registers is less than 120. For bytecodes with wide register
operands (above the window) their index needs to be translated
to avoid the reserved translation window.
Enables splay.js to run in Octane and a handful of mjsunit tests.
BUG=v8:4280,v8:4675
LOG=NO
Review URL: https://codereview.chromium.org/1613163002
Cr-Commit-Position: refs/heads/master@{#33516}
This adds an explicit ReThrow bytecode to be used in the modelling of
try-finally statements. An exception that is being re-thrown should not
trigger message object creation or location computation and hence cannot
use the existing Throw bytecode.
R=rmcilroy@chromium.org
TEST=cctest/test-interpreter/InterpreterTryFinally
BUG=v8:4674
LOG=n
Review URL: https://codereview.chromium.org/1621673002
Cr-Commit-Position: refs/heads/master@{#33472}
This implements a first version of exception handler table construction
within the interpreter. Note that the local control flow for try-catch
and try-finally statements is still off, and also stack unwinding does
not yet respect interpreter frames. But generated handler tables should
be populated correctly already.
R=oth@chromium.org
BUG=v8:4674
LOG=n
Review URL: https://codereview.chromium.org/1607433005
Cr-Commit-Position: refs/heads/master@{#33400}
o Adds wide variants of bytecodes that have operands describing ranges
of registers. The upcoming wide register support does not suppport
re-mapping ranges.
o Adds kRegPair16 and kRegTriple16 operands required for new wide
bytecodes and renames Count8/Count16 operands to RegCount8/RegCount16.
o Removes Exchange bytecodes
BUG=v8:4675
LOG=NO
Review URL: https://codereview.chromium.org/1595103006
Cr-Commit-Position: refs/heads/master@{#33389}
Make ForInPrepare take a kRegTriple8 operand and ForInNext take kRegPair8
operand for cache state. This is to ensure that the cache state output of
ForInPrepare is in consecutive registers to allow us to deopt the
ForInPrepare node from TF->Ignition (to be done in a followup CL).
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1584813002
Cr-Commit-Position: refs/heads/master@{#33357}
Split RegisterAllocationScope out of ExpressionResult and allocate one
for each statement. This ensures that we always have an outer register
allocation scope for statement code (used in CountOperation and
RegisterExecutionResult). Also refactored the register allocator code to
move it to it's own file and rename from TemporaryRegisterScope to
BytecodeRegisterAllocator.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1587033002
Cr-Commit-Position: refs/heads/master@{#33296}
Removes assignment hazard scope. Reverts back to the naive scheme of
allocating a temporary for every variable load. It was decided to revert it
because the current implementation does not handle logical expressions,
ternary operators, visiting objects in named/keyed loads. Also, we wanted
to evaluate alternate approaches and choose one when we have a mechanism
to measure performance.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1576403004
Cr-Commit-Position: refs/heads/master@{#33269}
Adds support for calling runtime functions which return a pair of
values. Adds the bytecode CallRuntimePair. Also adds support to TurboFan
for calling stubs which return multiple values.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1568493002
Cr-Commit-Position: refs/heads/master@{#33181}
This increases the size of addressable constant pool entries for jumps
to match other bytecodes using operands indexing the constant pool.
This change also introduces reservations for constant pool entries.
Reservations are used for forward jumps to ensure a constant pool entry
will be available when the jump target (label) is bound and the jump is
patched up in the bytecode array.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1546683002
Cr-Commit-Position: refs/heads/master@{#33125}
New bytecodes for making registers with indicies wider than 1-byte
accessible.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1555713002
Cr-Commit-Position: refs/heads/master@{#33091}
Changes LoadGlobal, StoreGlobal, LoadNamedProperty, and StoreNamedProperty to accept
the name of variable instead of index into the constant pool entry. Also made
GetConstantPoolEntry as a private function since it is no longer used outside of
BytecodeArrayBuilder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1546643002
Cr-Commit-Position: refs/heads/master@{#33020}
Adds support for deleting a variable in a lookup slot. Adds a new bytecode,
its implementation and tests. Also adds support for this bytecode to the
bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1542083002
Cr-Commit-Position: refs/heads/master@{#33019}
Consecutive registers are allocated in two passes. First we "reserve"
a set of registers and these get allocated when we actually use them.
If we request for a temporary register before we use all the consecutive
registers, the earlier implementation does not gaurantee that it allocates
outside the reservation for consecutive registers. This could cause problems
for example, in call_func(a, b++, c). This cl fixes
TemporaryRegisterScope::NewRegister, to return a new temporary register
outside the reservation for consecutive registers.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1531273002
Cr-Commit-Position: refs/heads/master@{#33005}
A pre-requisite for this change was changing the interpreter to use
Runtime::ForInStep to bring the interpreter implementation closer
to the turbofan implementation. Also required to flatten out the
cache parameters into the interpreter frame for de-opt.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1531693002
Cr-Commit-Position: refs/heads/master@{#32986}
Adds support for loading and storing lookup variables.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1524803003
Cr-Commit-Position: refs/heads/master@{#32913}
This change adds support for local control flow when building graphs
from bytecode. The change ensures loop emitted from the bytecode
generator are in natural order so the only back branches are for loops.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1502243002
Cr-Commit-Position: refs/heads/master@{#32911}
Adds implementation and tests for CreateObjectLiteral, CreateArrayLiteral and CreateRegExpLiteral
to bytecode graph builder. Also changes these bytecodes to expect three operands instead of using
accumulator to pass one of the operands. This is done to avoid looking into the earlier nodes to
fetch operands in the bytecode graph builder. Also adds support for wide variant of these
bytecodes to bytecode generator and bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1503963002
Cr-Commit-Position: refs/heads/master@{#32710}
an optomization to remove redundant cast operations.
1. Adds an optimization to remove redundant ToBoolean and ToName operations.
2. Adds implementation and tests for cast operatorts to bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1468003002
Cr-Commit-Position: refs/heads/master@{#32408}
Moves all files related to AST and scopes into ast/,
and all files related to scanner & parser to parsing/.
Also eliminates a couple of spurious dependencies.
R=mstarzinger@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1481613002
Cr-Commit-Position: refs/heads/master@{#32351}
ES6 section 12.2.8.1 states that flags for regular expression literals
must be checked during parsing and invalid flags are early errors. This
change adapts the Scanner and (Pre)Parser to act according to the spec.
This is also a prerequisite to unify the handling of literal creation
(for Objects, Arrays, Regexps, and at some point Classes).
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1472323002
Cr-Commit-Position: refs/heads/master@{#32273}
Adds code and tests to support CreateClosure bytecode when building
graphs.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1458603012
Cr-Commit-Position: refs/heads/master@{#32224}
This change introduces register re-mapping to avoid assignment hazards
in binary expressions. Expressions that cause problems typically have
the form y = x + (x = 4);. The problem occurs because the lhs value
evaluates to the register holding x. The rhs updates that register and
then applying the operation would use the new value as the lhs.
By tracking loads and stores in binary expressions the generator is now
able to detect when condition occurs and uses a temporary register for
the rhs value. When the binary expression evaluation is complete the
variable is updated with the latest temporary.
A new bytecode Mov performs this update without touching the
accumulator.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1412683011
Cr-Commit-Position: refs/heads/master@{#32141}
