The libdl library is already included on target builds of Android and needs
to be added to the build command line with a particular order to avoid
undefined references in other libraries. Fix this by only explicitly including
it in host builds and relying on the implicit inclusion on target builds.
Also remove the librt hack which is not longer necessary due to the AOSP build
bot having been removed.
BUG=chromium:469973
LOG=Y
Review URL: https://codereview.chromium.org/1036133005
Cr-Commit-Position: refs/heads/master@{#27535}
This prepares for re-landing crrev.com/956373002
This pulls all decision about the snapshot [no|internal|external] into one rule. Previously, this logic was in separate places and not /quite/ the same, which causes build problems.
BUG=
Review URL: https://codereview.chromium.org/1016603004
Cr-Commit-Position: refs/heads/master@{#27523}
This change introduces a liveness analyzer for local variables in frame states.
The main idea is to use the AstGraphBuilder::Environment class to build the control flow graph, and record local variable loads, stores and checkpoints in the CFG basic blocks (LivenessAnalyzerBlock class).
After the graph building finishes, we run a simple data flow analysis over the CFG to figure out liveness of each local variable at each checkpoint. Finally, we run a pass over all the checkpoints and replace dead local variables in the frame states with the 'undefined' value.
Performance numbers for Embenchen are below.
----------- box2d.js
Current --turbo-deoptimization: EmbenchenBox2d(RunTime): 11265 ms.
d8-master --turbo-deoptimization: EmbenchenBox2d(RunTime): 11768 ms.
d8-master: EmbenchenBox2d(RunTime): 10996 ms.
----------- bullet.js
Current --turbo-deoptimization: EmbenchenBullet(RunTime): 17049 ms.
d8-master --turbo-deoptimization: EmbenchenBullet(RunTime): 17384 ms.
d8-master: EmbenchenBullet(RunTime): 16153 ms.
----------- copy.js
Current --turbo-deoptimization: EmbenchenCopy(RunTime): 4877 ms.
d8-master --turbo-deoptimization: EmbenchenCopy(RunTime): 4938 ms.
d8-master: EmbenchenCopy(RunTime): 4940 ms.
----------- corrections.js
Current --turbo-deoptimization: EmbenchenCorrections(RunTime): 7068 ms.
d8-master --turbo-deoptimization: EmbenchenCorrections(RunTime): 6718 ms.
d8-master: EmbenchenCorrections(RunTime): 6858 ms.
----------- fannkuch.js
Current --turbo-deoptimization: EmbenchenFannkuch(RunTime): 4167 ms.
d8-master --turbo-deoptimization: EmbenchenFannkuch(RunTime): 4608 ms.
d8-master: EmbenchenFannkuch(RunTime): 4149 ms.
----------- fasta.js
Current --turbo-deoptimization: EmbenchenFasta(RunTime): 9981 ms.
d8-master --turbo-deoptimization: EmbenchenFasta(RunTime): 9848 ms.
d8-master: EmbenchenFasta(RunTime): 9640 ms.
----------- lua_binarytrees.js
Current --turbo-deoptimization: EmbenchenLuaBinaryTrees(RunTime): 11571 ms.
d8-master --turbo-deoptimization: EmbenchenLuaBinaryTrees(RunTime): 13089 ms.
d8-master: EmbenchenLuaBinaryTrees(RunTime): 10957 ms.
----------- memops.js
Current --turbo-deoptimization: EmbenchenMemOps(RunTime): 7766 ms.
d8-master --turbo-deoptimization: EmbenchenMemOps(RunTime): 7346 ms.
d8-master: EmbenchenMemOps(RunTime): 7738 ms.
----------- primes.js
Current --turbo-deoptimization: EmbenchenPrimes(RunTime): 7459 ms.
d8-master --turbo-deoptimization: EmbenchenPrimes(RunTime): 7453 ms.
d8-master: EmbenchenPrimes(RunTime): 7451 ms.
----------- skinning.js
Current --turbo-deoptimization: EmbenchenSkinning(RunTime): 15564 ms.
d8-master --turbo-deoptimization: EmbenchenSkinning(RunTime): 15611 ms.
d8-master: EmbenchenSkinning(RunTime): 15583 ms.
----------- zlib.js
Current --turbo-deoptimization: EmbenchenZLib(RunTime): 10825 ms.
d8-master --turbo-deoptimization: EmbenchenZLib(RunTime): 11180 ms.
d8-master: EmbenchenZLib(RunTime): 10823 ms.
BUG=
Review URL: https://codereview.chromium.org/949743002
Cr-Commit-Position: refs/heads/master@{#27232}
Instead of the current approach of storing flat vectors in frame states (and possibly reusing the last vector in AST graph builder), this change list builds a tree for the values and tries to reuse the nodes for different frame states. At the moment, we only use this for the local variable part of frame state, but nothing prevents us from using this for all parts.
This change provides two new classes: one for creating the tree (StateValuesCache) and one for iterating the trees (StateValuesAccess).
BUG=
Review URL: https://codereview.chromium.org/1008213002
Cr-Commit-Position: refs/heads/master@{#27222}
Mechanical change.
This will break dependency between profiler-generator and heap-profiler-generator.
Later this will help us to reuse SourcePosition in cpu-profiler.
BUG=452067
LOG=n
Review URL: https://codereview.chromium.org/945873002
Cr-Commit-Position: refs/heads/master@{#26780}
ModuleDescriptor will end up holding the set of data described in the
spec as a "Module record". This introduces a little bit of confusion
with ModuleInfo, but I hope that'll become clearer over time.
Also removed the interface-printing flags. We probably want
Module-printing flags, but that can wait until we have more
Module-related structures.
BUG=v8:1569
LOG=n
Review URL: https://codereview.chromium.org/935723004
Cr-Commit-Position: refs/heads/master@{#26728}
This adds a new ControlFlowOptimizer that - for now - recognizes chains
of Branches generated by the SwitchBuilder for a subset of javascript
switches into Switch nodes. Those Switch nodes are then lowered to
either table or lookup switches.
Also rename Case to IfValue (and introduce IfDefault) for consistency.
BUG=v8:3872
LOG=n
Review URL: https://codereview.chromium.org/931623002
Cr-Commit-Position: refs/heads/master@{#26691}
Function.prototype.toMethod was removed from ES6.
This removes the function and updates the tests to either
use %ToMethod or a dedicated syntax (using concise method
or a class).
BUG=v8:3330
LOG=N
R=dslomov@chromium.org, adamk
Review URL: https://codereview.chromium.org/914713002
Cr-Commit-Position: refs/heads/master@{#26559}
Contribution of PowerPC port (continuation of 422063005 and 817143002). This patch covers
the key changes needed to the common files needed to support AIX. Subsequent
patches will cover:
- changes to update the ppc directories so they are current with the changes
in the rest of the project.
- remaining AIX changes not resolved by 4.8 compiler
- individual optimizations for PPC
This is based off of the GitHub repository
https://github.com/andrewlow/v8ppcR=danno@chromium.org, svenpanne@chromium.org
BUG=
Review URL: https://codereview.chromium.org/866843003
Cr-Commit-Position: refs/heads/master@{#26343}
This relands the CL
https://codereview.chromium.org/797503007/.
It runs the version generation two times. First during
runhooks as a fallback for recipes that loose git context
(e.g. android_aosp). Second during compilation like in the
original CL. In case of failures, the result from the
runhooks call will be reused.
BUG=chromium:446166
LOG=n
Review URL: https://codereview.chromium.org/843913009
Cr-Commit-Position: refs/heads/master@{#26120}
- Make Node::Inputs and Node::Uses mostly STL compliant.
- Get rid of some pre-C++11 crappiness.
- Start moving unit tests from cctest to unittests.
- TrimInputCount() now tries to reserve inputs slots for
later appending.
- Fix numerous style guide violations.
TEST=cctest,unittests
R=dcarney@chromium.org
Review URL: https://codereview.chromium.org/851263002
Cr-Commit-Position: refs/heads/master@{#26098}
- Move NodeMarker to its own file, and introduce a non
templatized base class.
- Cleanup the include hell.
- Sanitize the Node construction methods now that we
got rid of that GenericNode/GenericGraph stuff.
- Protect against NodeId overflow in Graph.
- Various minor cleanups.
TEST=cctest,mjsunit,unittests
Review URL: https://codereview.chromium.org/838783002
Cr-Commit-Position: refs/heads/master@{#25977}
Also slightly refactor the NodeCache and CommonNodeCache classes to
reduce inherent overhead of caching.
TEST=cctest
Review URL: https://codereview.chromium.org/822923002
Cr-Commit-Position: refs/heads/master@{#25937}
The CommonOperatorReducer currently takes care of redundant Phis,
EffectPhis and Selects. This functionality overlaps with ControlReducer,
but is required to make certain optimizations effective, since the
ControlReducer only runs really early and really late in the pipeline
and therefore other reducers aren't reapplied properly after redundant
phi/select elimination.
TEST=unittests
R=hpayer@chromium.org
Review URL: https://codereview.chromium.org/817243003
Cr-Commit-Position: refs/heads/master@{#25922}
