Slots pointing to evacuation candidates are now recorded in the new RememberedSet<OLD_TO_OLD>.
The remembered set is extended to support typed slots.
During parallel evacuation all migration slots are recorded in local slots buffers.
After evacuation all local slots are added to the remembered set.
BUG=chromium:578883
LOG=NO
Review URL: https://codereview.chromium.org/1703823002
Cr-Commit-Position: refs/heads/master@{#34212}
This reducer doesn't really add value, because:
(a) it is only concerned with JSCallFunction and JSToNumber, but when
we get to it, all JSCallFunction nodes will have been replaced by
Call nodes, and in the not so far future, we will also have
replaced almost all JSToNumber nodes with better code,
(b) and the reducer tries to be smart and use one of the outermost
contexts, but that might not be beneficial always; actually it
might even create longer live ranges and lead to more spilling
in some cases.
But most importantly, the JSContextRelaxation currently blocks inlining
based on SharedFunctionInfo, because it requires the inliner to check
the native context, which in turn requires JSFunction knowledge. So I'm
removing this reducer for now to unblock the more important inliner
changes.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1715633002
Cr-Commit-Position: refs/heads/master@{#34139}
Moves InterpreterAssembler out of the compiler directory and into the
interpreter directory. Makes InterpreterAssembler as subclass of
CodeStubAssembler.
As part of this change, the special bytecode dispatch linkage type
is removed and instead we use a InterfaceDispatchDescriptor and
a normal CodeStub linkage type.
Removes a bunch of duplicated logic in InterpreterAssembler and
instead uses the CodeStubAssembler logic. Refactors Interpreter
with these changes.
Modifies CodeStubAssembler to add the extra operations required
by the Interpreter (extra call types, raw memory access and some extra
binary ops). Also adds the ability for subclasses to add extra
prologue and epilogue operations around calls, which is required
for the Interpreter.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1673333004
Cr-Commit-Position: refs/heads/master@{#33873}
This moves the JSCreate related functionality from JSTypedLowering into
a dedicated JSCreateLowering reducer. This is in preparation of landing
the support for optimized literals in TurboFan, which would blow up
JSTypedLowering quite seriously otherwise.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1678833002
Cr-Commit-Position: refs/heads/master@{#33813}
This replaces the global remembered set with per-page remembered sets.
Each page in the old space, map space, and large object space keeps track of
the set of slots in the page pointing to the new space.
The data structure for storing slot sets is a two-level bitmap, which allows
us to remove the store buffer overflow and SCAN_ON_SCAVENGE logic.
Design doc: https://goo.gl/sMKCf7
BUG=chromium:578883
LOG=NO
Review URL: https://codereview.chromium.org/1608583002
Cr-Commit-Position: refs/heads/master@{#33806}
This increases the size of register operands to be 16-bit.
Not all bytecodes have wide register variants, so when they are
needed a register translator will copy them into a small area
reserved at the top of the 8-bit register range and these registers
are supplied as arguments to the bytecode with 8-bit operands.
This is non-intrusive for typical bytecode where the number of
registers is less than 120. For bytecodes with wide register
operands (above the window) their index needs to be translated
to avoid the reserved translation window.
Enables splay.js to run in Octane and a handful of mjsunit tests.
BUG=v8:4280,v8:4675
LOG=NO
Review URL: https://codereview.chromium.org/1613163002
Cr-Commit-Position: refs/heads/master@{#33516}
This CL implements loop assignment analysis, a pass over a loop's body
to record local variables that are assigned. This pre-pass is similar
to that done on the JavaScript AST for the same reason: avoid introducing
too many phis at loop headers when building a graph.
R=bradnelson@chromium.org,ahaas@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1617723003
Cr-Commit-Position: refs/heads/master@{#33486}
Split RegisterAllocationScope out of ExpressionResult and allocate one
for each statement. This ensures that we always have an outer register
allocation scope for statement code (used in CountOperation and
RegisterExecutionResult). Also refactored the register allocator code to
move it to it's own file and rename from TemporaryRegisterScope to
BytecodeRegisterAllocator.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1587033002
Cr-Commit-Position: refs/heads/master@{#33296}
This increases the size of addressable constant pool entries for jumps
to match other bytecodes using operands indexing the constant pool.
This change also introduces reservations for constant pool entries.
Reservations are used for forward jumps to ensure a constant pool entry
will be available when the jump target (label) is bound and the jump is
patched up in the bytecode array.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1546683002
Cr-Commit-Position: refs/heads/master@{#33125}
As discussed in person, this adds the code from v8-native-prototype into
V8 proper, guarded by GYP flags that do not build the code by default.
Passing wasm=on to 'make' or setting v8_wasm as a GYP flag activates
building of this code.
An additional header file is added to and exported from the compiler
directory, src/compiler/wasm-compiler.h. This exposes a limited interface
with opaque Node and Graph types to the decoder to build TF graphs, as
well as functions to compile WASM graphs.
The mjsunit tests added are blacklisted because they fail without the
WASM object exposed to JS, which is also disabled by the build config
option.
This corresponds closely to 5981e06ebc, with some formatting fixes and moving some files into src/compiler.
R=mstarzinger@chromium.org, bradnelson@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1504713014
Cr-Commit-Position: refs/heads/master@{#32794}
This is the first part of escape analysis for turbofan.
At the moment, there is no deopt support, and support
for loops is partial (only binary Phis are handled).
The CL includes 4 unittests.
There are also 8 new mjsunit tests, some of which are
skiped as they require features not yet implemented.
BUG=v8:4586
LOG=n
Review URL: https://codereview.chromium.org/1457683003
Cr-Commit-Position: refs/heads/master@{#32498}
Removing bytecode graph builder tests as they are high maintenance and
have limited use, ie they track changes in the implementation rather
than behaviour.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1477783003
Cr-Commit-Position: refs/heads/master@{#32333}
Reason for revert:
Unsound use of types in the MachineOperatorReducer. Will work on a sound solution with Fedor.
Original issue's description:
> [compiler] merge binary-operator-reducer
>
> Merge BinaryOperatorReducer into the MachineOperatorReducer class.
> It does not need `Revisit()` calls, because the newly inserted nodes are
> visited anyway, and there are no other methods that need AdvancedReducer
> there.
>
> BUG=
> R=titzer@chromium.org
>
> Committed: https://crrev.com/993ba9d2529a6401b3040b9263f8d06db7dbb4f1
> Cr-Commit-Position: refs/heads/master@{#32298}
TBR=titzer@chromium.org,fedor@indutny.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1476763006
Cr-Commit-Position: refs/heads/master@{#32310}
Merge BinaryOperatorReducer into the MachineOperatorReducer class.
It does not need `Revisit()` calls, because the newly inserted nodes are
visited anyway, and there are no other methods that need AdvancedReducer
there.
BUG=
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1473073004
Cr-Commit-Position: refs/heads/master@{#32298}
...based on the 2-lock algorithm by M. Scott and M. Michael (1992).
BUG=chromium:524425
LOG=N
Review URL: https://codereview.chromium.org/1448283004
Cr-Commit-Position: refs/heads/master@{#32078}
This change binds each {Cancelable} task to a so-called {CancelableTaskManager},
which is then used to handle concurrent cancelation as well as synchronizing
shutdown for already running tasks. Since ownership of tasks is transferred to
the platform executing a task (destructor), handling in the manager uses integer
ids. Note that this also mitigates (modulo integer size) the ABA problem.
All handling of {Cancelable} tasks is now encapsulated into the corresponding
manager, which is instantiated for each isolate.
R=hpayer@chromium.org
BUG=chromium:524425
LOG=N
CQ_EXTRA_TRYBOTS=tryserver.v8:v8_linux_arm64_gc_stress_dbg;tryserver.v8:v8_linux_gc_stress_dbg;tryserver.v8:v8_mac_gc_stress_dbg;tryserver.v8:v8_linux64_msan_rel;tryserver.v8:v8_linux64_tsan_rel;tryserver.v8:v8_mac64_asan_rel
Review URL: https://codereview.chromium.org/1409993012
Cr-Commit-Position: refs/heads/master@{#31997}
Both the JSTypeFeedbackSpecializer and the JSTypeFeedbackLowering is
dead code by now, since the more general JSNativeContextSpecialization
deals with the property/global load/store type feedback in a way that
also interacts properly with inlining.
BUG=v8:4470
LOG=n
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1407913003 .
Cr-Commit-Position: refs/heads/master@{#31462}
Removes a branch that checks for a condition that has been checked on dominators of the branch.
This introduces a new reducer that propagates the list of checked conditions (and their boolean values) through the control flow graph. If it encounters a branch checking a condition with a known value, the branch is eliminated.
The analysis relies on loops being reducible: if a condition has been checked on all paths to loop entry, then it is checked in the loop (regardless what of the conditions checked inside the loop).
The implementation is fairly naive and could be improved:
- all the operation on the condition lists could be made allocation-free when revisited.
- we could try to use a map structure rather than a linked list (to make
lookups faster).
- the merging of control flow could be changed to take into account
conditions from non-dominating paths (as long as all paths check
the condition).
Review URL: https://codereview.chromium.org/1376293005
Cr-Commit-Position: refs/heads/master@{#31347}
Reason for revert:
Prime suspect in breakage of V8 Linux -- no snap
Original issue's description:
> [swarming] Isolate v8 testing.
>
> Add gyp support and isolates for default test suites.
> Add two default isolates, one (default) for using the
> test suite collection we call "default" on the bots. One
> (developer_default) for also supporting the way developers
> call the driver (i.e. without argument, which includes
> the unittests).
>
> BUG=chromium:535160
> LOG=n
>
> Committed: https://crrev.com/9bd83f58f29ab0c7c5b71b00bcb1df3a9e641f05
> Cr-Commit-Position: refs/heads/master@{#31081}
TBR=tandrii@chromium.org,jochen@chromium.org,maruel@chromium.org,machenbach@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:535160
Review URL: https://codereview.chromium.org/1370993008
Cr-Commit-Position: refs/heads/master@{#31084}
Add gyp support and isolates for default test suites.
Add two default isolates, one (default) for using the
test suite collection we call "default" on the bots. One
(developer_default) for also supporting the way developers
call the driver (i.e. without argument, which includes
the unittests).
BUG=chromium:535160
LOG=n
Review URL: https://codereview.chromium.org/1380593002
Cr-Commit-Position: refs/heads/master@{#31081}
The comparison operators and ToBoolean are implemented by calling into
the runtime. There are new runtime methods are prefixed with Interpreter
to make use case clear.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1369123002
Cr-Commit-Position: refs/heads/master@{#30983}
Add methods for converting parameter index to a register and vice-versa.
Move Register class into bytecodes.h.
Update Bytecodes::Decode to pretty print parameters.
BUG=v8:4280
LOG=NO
Review URL: https://codereview.chromium.org/1325983002
Cr-Commit-Position: refs/heads/master@{#30549}
- Make the API look like v8::V8::InitializeICU.
(That is: A static method call, not an object to be created on the stack.)
- Fix path separator on Windows, by calling base::OS::isPathSeparator.
- Move into API, so that it can be called by hello-world & friends.
- Actually call it from hello-world and friends.
R=jochen@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1292053002
Cr-Commit-Position: refs/heads/master@{#30174}
Modifies the BytecodeArrayBuilder to create register operands which are
negative. This reduces the number of instructions to access registers
by the interpreter and allows us to use positive register operands to
access parameter values.
Adds a Register class to keep register usage typesafe and simplify the
convertion to bytecode operand values.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1283313003
Cr-Commit-Position: refs/heads/master@{#30151}
Adds basic support for generation of interpreter bytecode handler code
snippets. The InterpreterAssembler class exposes a set of low level,
interpreter specific operations which can be used to build a Turbofan
graph. The Interpreter class generates a bytecode handler snippet for
each bytecode by assembling operations using an InterpreterAssembler.
Currently only two simple bytecodes are supported: LoadLiteral0 and Return.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1239793002
Cr-Commit-Position: refs/heads/master@{#29814}
Consolidated conflict detection and traversal logic in CoalescedLiveRanges to avoid duplication in both code and testing. In addition, this change achieves better separation between CoalescedLiveRanges and other register allocator components, improving testability and maintainability.
BUG=
Review URL: https://codereview.chromium.org/1219063017
Cr-Commit-Position: refs/heads/master@{#29783}
In many cases, the context that TurboFan's ASTGraphBuilder or subsequent
reduction operations attaches to nodes does not need to be that exact
context, but rather only needs to be one with the same native context,
because it is used internally only to fetch the native context, e.g. for
creating and throwing exceptions.
This reducer recognizes common cases where the context that is specified
for a node can be relaxed to a canonical, less specific one. This
relaxed context can either be the enclosing function's context or a specific
Module or Script context that is explicitly created within the function.
This optimization is especially important for TurboFan-generated code stubs
which use context specialization and inlining to generate optimal code.
Without context relaxation, many extraneous moves are generated to pass
exactly the right context to internal functions like ToNumber and
AllocateHeapNumber, which only need the native context. By turning context
relaxation on, these moves disappear because all these common internal
context uses are unified to the context passed into the stub function, which
is typically already in the correct context register and remains there for
short stubs. It also eliminates the explicit use of a specialized context
constant in the code stub in these cases, which could cause memory leaks.
Review URL: https://codereview.chromium.org/1244583003
Cr-Commit-Position: refs/heads/master@{#29763}
The RawMachineAssembler will be used to build the interpreter, so it needs
to move back to src/compiler.
This reverts commit b5b00cc031.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1221303014
Cr-Commit-Position: refs/heads/master@{#29519}
The three different concerns that the ControlReducer used to deal with
are now properly separated into
a.) DeadCodeElimination, which is a regular AdvancedReducer, that
propagates Dead via control edges,
b.) CommonOperatorReducer, which does strength reduction on common
operators (i.e. Branch, Phi, and friends), and
c.) GraphTrimming, which removes dead->live edges from the graph.
This will make it possible to run the DeadCodeElimination together with
other passes that actually introduce Dead nodes, i.e. typed lowering;
and it opens the door for general inlining without two stage fix point
iteration.
To make the DeadCodeElimination easier and more uniform, we basically
reverted the introduction of DeadValue and DeadEffect, and changed the
Dead operator to produce control, value and effect. Note however that
this is not a requirement, but merely a way to make dead propagation
easier and more uniform. We could always go back and decide to have
different Dead operators if some other change requires that.
Note that there are several additional opportunities for cleanup now,
i.e. OSR deconstruction could be a regular reducer now, and we don't
need to use TheHole as dead value marker in the GraphReducer. And we can
actually run the dead code elimination together with the other passes
instead of using separate passes over the graph. We will do this in
follow up CLs.
R=jarin@chromium.org, mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1193833002
Cr-Commit-Position: refs/heads/master@{#29146}
