This is a reland of 6b4dc039a6
Original change's description:
> [wasm] Refactor function body decoder
>
> This refactoring separates graph building from wasm decoding. The
> WasmGraphBuilder is just a consumer of the decoded information.
> Decoding without any consumer (i.e. just validation) gets 16% faster by
> this refactoring, because no TFNode* have to be stored in the value
> stack, and all dynamic tests to determine whether the graph should be
> build are gone (measured on AngryBots; before: 110.2 +- 3.3ms, after:
> 92.2 +- 3.1 ms).
>
> This new design will allow us to also attach other consumers, e.g. a
> new baseline compiler.
>
> R=titzer@chromium.org
>
> Bug: v8:6600
> Change-Id: I4b60f2409d871a16c3c52a37e515bcfb9dbb8f54
> Reviewed-on: https://chromium-review.googlesource.com/571010
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Reviewed-by: Ben Titzer <titzer@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#47671}
TBR=titzer@chromium.org
Bug: v8:6600
Change-Id: Idd867c5a1917437de5b6e3de5917cc1c9f194489
Reviewed-on: https://chromium-review.googlesource.com/640591
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47678}
This adds support to specify the maximum memory size when building a
WebAssembly module. Default is not maximum, one can be explicitly set.
It is mainly used by the WebAssembly fuzzers to prevent OOMs.
R=ahaas@chromium.org
BUG=chromium:759973
Change-Id: Ibf5fa63a7e36e5f3b65ced528c73a65355d5632f
Reviewed-on: https://chromium-review.googlesource.com/640386
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47676}
This CL introduces 4 test that verify that the effects of a grow_memory
instruction executed in a function invoked inside a loop are visible
also when the loop is over. This is needed because the
AnalyzeLoopAssignment method in function-body-decoder.cc is creating Phi
nodes only for variables assigned inside the loop. The test cases
introduced by this CL verify that the mem_size and mem_start variables
are always correct.
The tests verify the output of the current_memory instruction and the
result of loading a variable stored in the grown memory inside the
loop in the following cases:
* the memory is grown in a directly called function inside a loop;
* the memory is grown in an indirectly called function inside a loop.
R=ahaas@chromium.org,clemensh@chromium.org,gdeepti@chromium.org
Change-Id: I2992bf4086b5eac9580c87e2e0ca06364b99714c
Reviewed-on: https://chromium-review.googlesource.com/637911
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Enrico Bacis <enricobacis@google.com>
Cr-Commit-Position: refs/heads/master@{#47674}
This reverts commit 6b4dc039a6.
Reason for revert: Mips build failure: https://build.chromium.org/p/client.v8.ports/builders/V8%20Mips%20-%20builder/builds/11749
Original change's description:
> [wasm] Refactor function body decoder
>
> This refactoring separates graph building from wasm decoding. The
> WasmGraphBuilder is just a consumer of the decoded information.
> Decoding without any consumer (i.e. just validation) gets 16% faster by
> this refactoring, because no TFNode* have to be stored in the value
> stack, and all dynamic tests to determine whether the graph should be
> build are gone (measured on AngryBots; before: 110.2 +- 3.3ms, after:
> 92.2 +- 3.1 ms).
>
> This new design will allow us to also attach other consumers, e.g. a
> new baseline compiler.
>
> R=titzer@chromium.org
>
> Bug: v8:6600
> Change-Id: I4b60f2409d871a16c3c52a37e515bcfb9dbb8f54
> Reviewed-on: https://chromium-review.googlesource.com/571010
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Reviewed-by: Ben Titzer <titzer@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#47671}
TBR=titzer@chromium.org,clemensh@chromium.org
Change-Id: I76a50e355f0390cc53a2da4ceedd8830ca20a9c6
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:6600
Reviewed-on: https://chromium-review.googlesource.com/640870
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47672}
This refactoring separates graph building from wasm decoding. The
WasmGraphBuilder is just a consumer of the decoded information.
Decoding without any consumer (i.e. just validation) gets 16% faster by
this refactoring, because no TFNode* have to be stored in the value
stack, and all dynamic tests to determine whether the graph should be
build are gone (measured on AngryBots; before: 110.2 +- 3.3ms, after:
92.2 +- 3.1 ms).
This new design will allow us to also attach other consumers, e.g. a
new baseline compiler.
R=titzer@chromium.org
Bug: v8:6600
Change-Id: I4b60f2409d871a16c3c52a37e515bcfb9dbb8f54
Reviewed-on: https://chromium-review.googlesource.com/571010
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47671}
As part of J2V8 development (https://github.com/eclipsesource/J2V8),
we realized that we had a subtle bug in how Isolate scope was created
and it's lifetime managed, see:
https://github.com/eclipsesource/J2V8/issues/313.
Mentioned above bug was fixed, however, what we also noticed is that
V8 API has been constantly and slowly moving to such an API, in which
one has to pass Isolate explicitly to methods and/or constructors. We
found two more places that might have been overlooked. This contribution
adds passing of Isolate pointer explicitly to constructors of
String::Utf8Value and String::Value classes.
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng;master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I61984285f152aba5ca922100cf3df913a9cb2cea
Reviewed-on: https://chromium-review.googlesource.com/593309
Commit-Queue: Adam Klein <adamk@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47656}
We now only require API references to be provided when we
actually deserialize them. Also changed the internal implementation
to avoid copying API references into V8.
R=petermarshall@chromium.org
Bug: v8:6448
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: Iddb0465ff6e95020006d41b5e87614dce8f0140b
Reviewed-on: https://chromium-review.googlesource.com/632098
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47649}
This reverts commit 49e3bfd572.
Reason for revert: Primary suspect for blocked roll: 759552
Original change's description:
> [snapshot] Move builtins to dedicated snapshot area
>
> As a first step towards lazy builtin deserialization, this CL moves
> builtins to their own dedicated area in the snapshot blob, physically
> located after startup data and before context-specific data.
>
> The startup- and partial serializers now serialize all seen builtins as
> references, i.e. they only encode the relevant builtin id (taking care
> to preserve special behavior around the interpreter trampoline and
> CompileLazy). Builtins are later fully serialized by the
> BuiltinSerializer. The separate blobs are finally glued together by
> CreateSnapshotBlob.
>
> Deserialization takes the same steps: when we see builtin reference
> bytecodes before builtins have been deserialized, we push to a list of
> deferred builtin references. After builtin deserialization, this list is
> iterated and all builtin references are fixed up.
>
> Bug: v8:6624
> Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
> Change-Id: Idee42fa9c92bdbe8d5b8c4b8bf3ca9dd39634004
> Reviewed-on: https://chromium-review.googlesource.com/610225
> Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Commit-Queue: Jakob Gruber <jgruber@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#47596}
TBR=yangguo@chromium.org,mlippautz@chromium.org,jgruber@chromium.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: v8:6624
Change-Id: I9906c9ea15a623226b890f63bc65876a6f5203f8
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/638331
Reviewed-by: Michael Hablich <hablich@chromium.org>
Commit-Queue: Michael Hablich <hablich@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47648}
This makes sure the minimum memory size for WebAssembly modules derived
from asm.js is set to zero. It allows instatiation without allocating an
underlying memory, when such memory is unused. It also fixes a bug in
patching of embedded memory sizes for asm.js modules.
R=ahaas@chromium.org
TEST=mjsunit/regress/regress-crbug-759327
BUG=chromium:759327
Change-Id: If5a965b96a03cbb5ba15bc41fbaf359f74961f41
Reviewed-on: https://chromium-review.googlesource.com/637912
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47646}
This removes dangerous accessors method from the arguments object
accessor classes. The shape of an arguments object might transition,
turning the fields into dictionary mode, making the accessors invalid.
It also fixes a bug in the reported number of embedder fields on the
arguments object.
R=ishell@chromium.org
TEST=cctest/test-api/InternalFieldsOfRegularObjects
Change-Id: Ib7a73608c6236fe8864434e0cfdcb754ae012a75
Reviewed-on: https://chromium-review.googlesource.com/636368
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47643}
This reverts commit 1169f55bbc.
Reason for revert: http://crbug.com/758994
Original change's description:
> Remove obsolete kNumber binop feedback.
>
> With the removal of Crankshaft, kNumber has become obsolete as
> BinaryOperationFeedback. Turbofan uses kNumberOrOddball.
>
> Bug:
> Change-Id: If577f5efcc81d7c08f43908f2764ff0ec6f8747c
> Reviewed-on: https://chromium-review.googlesource.com/628376
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Mythri Alle <mythria@chromium.org>
> Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
> Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#47555}
TBR=jkummerow@chromium.org,jarin@chromium.org,neis@chromium.org,mythria@chromium.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: I1b33f572f3e6865e00d2468bffcce2ea466814b3
Reviewed-on: https://chromium-review.googlesource.com/637711
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47642}
Get the old table size after converting integer of 'delta' argument.
Converting integer of the argument can execute another javascript code,
and the code can trigger mismatching between table sizes of instance and
table object, which causes redundant memory allocation.
http://webassembly.org/docs/js/#webassemblytableprototypegrow
Bug: chromium:752423
Change-Id: If9a576d20625d0c39342ea5de114e9fc9f230125
Reviewed-on: https://chromium-review.googlesource.com/627248
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47641}
TryCatch only clears the pending exception if it has been propagated
through OptionalRescheduleException. This is another tentative fix for
https://crbug.com/754422.
Bug: chromium:754422
Change-Id: Ifbbeed8ef44131a0a010ac6bde3adbbf9fb4c4af
Reviewed-on: https://chromium-review.googlesource.com/637305
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47634}
There's no need to have the StringLengthProtector as a PropertyCell,
since it's only used to guard against deoptimization loops. This also
allows us to remove the use of the CompilationDependencies from the
JSTypedLowering.
R=jarin@chromium.org
Bug: v8:6759
Change-Id: I54a37be6b8064ca3475e3b321f928b6a9903f209
Tbr: mstarzinger@chromium.org
Reviewed-on: https://chromium-review.googlesource.com/637303
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47633}
This is so that precise coverage starts with a clean slate.
The old behavior can be emulated by calling getBestEffortCoverage
before starting precise coverage.
R=jgruber@chromium.org
Bug: chromium:757998
Change-Id: Ib3ee2316966f676456198159bdcf8ba8b9d3896f
Reviewed-on: https://chromium-review.googlesource.com/635084
Commit-Queue: Yang Guo <yangguo@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47629}
Instead of using a word to store the status of the promise, this
patch uses 2 bit on flags.
Bug: v8:5046
Change-Id: Ic651338230dbe1704c68de8652676f236a3298f0
Reviewed-on: https://chromium-review.googlesource.com/634623
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47628}
Currently, injected script source adds natural object properties before
internal properties. This can result in important ones such as
"[[PrimitiveValue]]" being left out. This CL
- makes sure internal properties are always added to preview
- removes unused "[[Iterator*]]" properties from preview
- boxed strings (e.g. new String("foo")) will not send unnecessary
properties 0:"f", 1:"o", 2:"o" if the [[PrimitiveValue]] is sent.
Bug: chromium:567265
Cq-Include-Trybots: master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Icd5c7410351f371055277ce471226cc6fb5a861f
Reviewed-on: https://chromium-review.googlesource.com/634584
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Commit-Queue: Erik Luo <luoe@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47622}
This patch re-writes the call-function-on-async.js test according
to the new style.
R=kozy
Change-Id: I0541d336fe2bba3197170b0cc22c70e96d8543aa
Reviewed-on: https://chromium-review.googlesource.com/636691
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Andrey Lushnikov <lushnikov@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47621}
We're moving the code table off the heap, while the export wrappers
are instance-specific, and, thus, won't move off the heap.
Bug:
Change-Id: I392fb537c7708a0a06f3468f714335df29bc401b
Reviewed-on: https://chromium-review.googlesource.com/636309
Reviewed-by: Brad Nelson <bradnelson@chromium.org>
Commit-Queue: Mircea Trofin <mtrofin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47619}
All microbenchmarks now add 20 variables together per iteration, rather than
just a single variable.
Also re-add a sanity check after the loop, and fix a missing variable add (a15)
from the loop.
Bug: v8:1569
Change-Id: Ie54357b5cedaafd85f01c699c08b24a5ee6468c9
Reviewed-on: https://chromium-review.googlesource.com/636284
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47618}
This change adapts the Call bytecode handlers such that they don't require
a stack frame. It does this by modifying the call bytecode handler to
tail-call the Call or InterpreterPushArgsAndCall builtins. As a result, the
callee function will return to the InterpreterEntryTrampoline when it returns
(since this is the return address on the interpreter frame), which is
adapted to dispatch to the next bytecode handler. The return bytecode
handler is modified to tail-call a new InterpreterExitTramoline instead
of returning to the InterpreterEntryTrampoline.
Overall this significanlty reduces the amount of stack space required for
interpreter frames, increasing the maximum depth of recursive calls from
around 6000 to around 12,500 on x64.
BUG=chromium:753705
Change-Id: I23328e4cef878df3aca4db763b47d72a2cce664c
Reviewed-on: https://chromium-review.googlesource.com/634364
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47617}
For deferred commands (such as in try-finally), some deferred commands
save and restore the accumulator using a result register (e.g. return,
throw, rethrow), while others don't (e.g. break, continue,
fall-through).
However, conditionally reading this result register that may not ever be
written caused it to be considered live from the start of the function,
as far as the liveness analysis could statically tell.
Now, we write the result register for all deferred commands, including
the fall-through. As a micro-optimization, we re-use the Smi command
tokeen to clobber the result, rather than emitting an LdaUndefined.
Bug: chromium:758472
Change-Id: I2ea65e2249b40ee6403216e654a8bb88d50bec3b
Reviewed-on: https://chromium-review.googlesource.com/635592
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47612}
We cannot assume that the receiver is a JSObject, nor can we assume
ToObject() completes successfully.
TBR=yangguo@chromium.org
Bug: chromium:739954
Change-Id: Id55571131ef8755e86f15cd2acb918ff0f1b7788
Reviewed-on: https://chromium-review.googlesource.com/632376
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47611}
The Uint32(limit) conversion can end up transitioning the regexp
instance to slow mode. In this case we need to bail out to runtime while
ensuring that ToUint32 is not observably called a second time. We do
this by passing the already-converted value to runtime.
This particular path was broken and we ended up passing the original
maybe_limit value to runtime instead.
TBR=yangguo@chromium.org
Bug: chromium:758763
Change-Id: If7f23b452d2e134ad9be3d4ef1d78d1c946fcef0
Reviewed-on: https://chromium-review.googlesource.com/635588
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47609}
Compile the module created in trap-location.js with both synchronous and
asynchronous compilation. Thereby I can reuse the test for streaming
compilation later.
R=clemensh@chromium.org
Change-Id: Id2e0c70886ddd1b11d51f614d02757099541aedd
Reviewed-on: https://chromium-review.googlesource.com/635165
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47600}
This makes sure instantiate of asm.js modules fails gracefully on heap
buffers exceeding the uint32_t range supported by WebAssembly.
R=clemensh@chromium.org
TEST=mjsunit/regress/regress-crbug-754175
BUG=chromium:754175
Change-Id: I4a9c6791beaab6da826b5b6b5a495f97e9d3b4e9
Reviewed-on: https://chromium-review.googlesource.com/632618
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47598}
As a first step towards lazy builtin deserialization, this CL moves
builtins to their own dedicated area in the snapshot blob, physically
located after startup data and before context-specific data.
The startup- and partial serializers now serialize all seen builtins as
references, i.e. they only encode the relevant builtin id (taking care
to preserve special behavior around the interpreter trampoline and
CompileLazy). Builtins are later fully serialized by the
BuiltinSerializer. The separate blobs are finally glued together by
CreateSnapshotBlob.
Deserialization takes the same steps: when we see builtin reference
bytecodes before builtins have been deserialized, we push to a list of
deferred builtin references. After builtin deserialization, this list is
iterated and all builtin references are fixed up.
Bug: v8:6624
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: Idee42fa9c92bdbe8d5b8c4b8bf3ca9dd39634004
Reviewed-on: https://chromium-review.googlesource.com/610225
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47596}
Tentative fix for the CF crashes in https://crbug.com/754422.
Bug: chromium:754422
Change-Id: I0dcb6b8860cb0bf20b3566ffba08e6772398ee65
Reviewed-on: https://chromium-review.googlesource.com/632176
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47591}
Change-Id: Id9f60cdafc486de2b04684de84174f9765637c12
Reviewed-on: https://chromium-review.googlesource.com/601328
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47586}
This flag allows invalid escape sequences in tagged templates, which is
a stage-4 TC39 proposal shipping in other browsers.
Bug: v8:5546
Cq-Include-Trybots: master.tryserver.v8:v8_linux_noi18n_rel_ng
Change-Id: I3e7c374c9b547f62d5976f76a7208d05fe9decf8
Reviewed-on: https://chromium-review.googlesource.com/581885
Commit-Queue: Kevin Gibbons <bakkot@gmail.com>
Reviewed-by: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47584}
U+feff is the UTF BOM but if it occurs inside the text, it's a "zero-width
no-break space". However, the UTF-8 decoder in script streaming still thought
it's a BOM and skipped it. The correct way to handle it would be to create a
U+feff code point instead - the Scanner will then handle it as whitespace.
This is a discrepancy between the Blink UTF-8 decoder and the V8 UTF-8 decoder,
and caused the source positions be off by one. This bug went unnoticed, since
normally off-by-one in this situation doesn't make the code to break.
BUG=chromium:758508,chromium:758236
Change-Id: Ib92a3ee65c402e21b77e42537db2a021cff55379
Reviewed-on: https://chromium-review.googlesource.com/632096
Reviewed-by: Adam Klein <adamk@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47583}
In case of LAP(lazy accessor pair), the function's creation context
must be equal to the accessor holder's creation context, so this CL
changes the current context to the accessor holder's creation context.
Note that this is the second attempt after https://crrev.com/2770003002
The change from the previous attempt is to skip looking for the
object's constructor if the object itself is a function.
Also some of Blink's LAP-context-sensitive tests got updated at
https://crrev.com/c/597990 and the rest of the tests will get
temporarily disabled at https://crrev.com/c/605408 .
TBR=verwaest@chromium.org
Bug: v8:6156
Change-Id: I09709a90995d82a03996d0347e5a1d8425b5db9c
Reviewed-on: https://chromium-review.googlesource.com/563152
Commit-Queue: Yuki Shiino <yukishiino@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47572}
DEBUG builds pull in all sorts of instrumentation infrastructure that
leads to larger heaps. The check for intial size is only useful for
release builds.
Bug: v8:6746
Change-Id: I5ab220d21167e69d7fb32c9db68045368c4ef178
R: ulan@chromium.org
Reviewed-on: https://chromium-review.googlesource.com/631876
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#47565}
