Failure is due to different endianness on big endian. The test now passes on
both big-endian and little-endian architectures.
TEST=cctest/test-code-stubs-mips64/ConvertDToI
BUG=
Review-Url: https://codereview.chromium.org/2157373002
Cr-Commit-Position: refs/heads/master@{#38022}
ToName was always generated with a subsequent Star, fuse them.
Requires a few changes in the peephole optimizer as ToName cannot be
elided as easily, but must be replaced by Star.
BUG=v8:4280
LOG=n
Review-Url: https://codereview.chromium.org/2169813002
Cr-Commit-Position: refs/heads/master@{#38019}
After multiplying two integers we emit code like:
if (result == 0) {
if (OR_OPERATION(rhs, lhs) < 0) {
DEOPT;
}
}
This CL allows us to eliminate the OR and comparison if either rhs or
lhs is a negative number, reducing the code to:
if (result == 0) DEOPT;
BUG=
Review-Url: https://codereview.chromium.org/2167643002
Cr-Commit-Position: refs/heads/master@{#38016}
Turn the LoadElimination into a proper graph Reducer so that it can run
together with ValueNumbering and RedundancyElimination to a fixpoint
for maximum load/check elimination. This also adds initial support for
eliminating redundant LoadElement/StoreElement nodes.
BUG=v8:4930,v8:5141
Review-Url: https://codereview.chromium.org/2164253002
Cr-Commit-Position: refs/heads/master@{#38015}
Move the logic for allocating the global declaration pair array
from VisitDeclarations to a later step. This is required for
concurrent bytecode generation.
This change requires adding support for reserving fixed
constant pool array entries, which can be later updated
with the value of the literal.
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2167763003
Cr-Commit-Position: refs/heads/master@{#38010}
Introducing machine operators early causes trouble for the typing,
truncation analysis and representation selection, so we should rather
stick to simplified operators instead. Now there's only the for-in case
left, which is not clear how we can handle this in a better way.
Drive-by-fix: Also don't introduce Int32Constant and Word32Shl in
JSTypedLowering, but use NumberConstant and proper NumberShiftLeft
operators instead.
R=jarin@chromium.org
BUG=chromium:630951
Review-Url: https://codereview.chromium.org/2182453002
Cr-Commit-Position: refs/heads/master@{#38008}
Reason for revert:
Suspected to cause crbug.com/630969
Original issue's description:
> [heap] Remove black pages and use black areas instead.
>
> BUG=630386
> LOG=n
>
> Committed: https://crrev.com/b008a0d5a3db80a854cb93d9c94d67bf2d780f2c
> Cr-Commit-Position: refs/heads/master@{#37967}
TBR=ulan@chromium.org,hpayer@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=630386
Review-Url: https://codereview.chromium.org/2176133002
Cr-Commit-Position: refs/heads/master@{#38006}
Always use the BytecodeGraphBuilder when the --turbo-from-bytecode
is enabled, assuming the function should be compiled for Ignition.
Adds a new MaybeOptimizeIgnition function to runtime-profiler
which is called if the function should be optimized from bytecode
rather than going via full-codegen.
BUG=v8:4280
Committed: https://crrev.com/9ca7db914be88e6792a88eab4a1988ee031d70c4
Review-Url: https://codereview.chromium.org/2156753002
Cr-Original-Commit-Position: refs/heads/master@{#37921}
Cr-Commit-Position: refs/heads/master@{#38002}
Skip test-run-load-store/RunUnalignedLoadStoreUnalignedAccess on ARM until
UnalignedLoad and UnalignedStore operators get implemented
NOTRY=true
Review-Url: https://codereview.chromium.org/2182433002
Cr-Commit-Position: refs/heads/master@{#38001}
The dead code elimination in SimplifiedLowering can eliminate pure nodes
if they don't have value uses. But some of those can indeed have control
inputs, i.e. Phi nodes do of course have a control input.
R=jarin@chromium.org
BUG=chromium:630923
Review-Url: https://codereview.chromium.org/2177133002
Cr-Commit-Position: refs/heads/master@{#37995}
In PrependElementIndicesImpl we sort a FixedArray of indices potentially
containing HeapNumbers. During the string conversion we might trigger a GC.
This in turn might try to read a slot where we previously had a HeapNumber
but the sort sneaked a SMI in there which is not a valid pointer.
BUG=chromium:630561
Review-Url: https://codereview.chromium.org/2173653003
Cr-Commit-Position: refs/heads/master@{#37993}
The uses_arguments() bool is not needed for correct
behavior, since that same information is available after scope analysis
based on whether we allocated the Scope::arguments_ var.
BUG=v8:5209
Review-Url: https://codereview.chromium.org/2168293002
Cr-Commit-Position: refs/heads/master@{#37990}
Implement UnalignedLoad and UnalignedStore optional
turbofan operators and use them in WasmCompiler for unaligned
memory access.
BUG=
Review-Url: https://codereview.chromium.org/2122853002
Cr-Commit-Position: refs/heads/master@{#37988}
TC-39 recently decided to remove the Python-based testing harness from the
Test262 project [1]. The code has been duplicated in a standalone project;
update V8's dependencies to fetch from that new location. This is based on
an earlier patch by Mike Pennisi.
[1] 2b9722db9b/es7/2016-05/may-25.md
BUG=v8:5078
Review-Url: https://codereview.chromium.org/2131743002
Cr-Commit-Position: refs/heads/master@{#37985}
ToNumber's result is always directly stored to a register using a Star
bytecode. Fuse it into ToNumber.
BUG=v8:4280
LOG=n
Review-Url: https://codereview.chromium.org/2165953002
Cr-Commit-Position: refs/heads/master@{#37976}
So far we don't have a useful way to inline Math.max or Math.min in
TurboFan optimized code. This adds new operators NumberMax and NumberMin
and changes the Float64Max/Float64Min operators to have JavaScript
semantics instead of the C++ semantics that it had previously.
This also removes support for recognizing the tenary case in the
CommonOperatorReducer, since that doesn't seem to have any positive
impact (and actually doesn't show up in regular JavaScript, where
people use Math.max/Math.min instead).
Drive-by-fix: Also nuke the unused Float32Max/Float32Min operators.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2170343002
Cr-Commit-Position: refs/heads/master@{#37971}
This allows us to skip complicated logic for setting the accessors.
BUG=
Review-Url: https://codereview.chromium.org/2164903004
Cr-Commit-Position: refs/heads/master@{#37969}
This is in preparation to implementing exception prediction for async
functions. Each handler table entry can now predict "caught", "uncaught", or
"promise". The latter indicates that the exception will lead to a promise
rejection.
To mark the relevant try-catch blocks, we add a new native syntax.
try { } %catch (e) { } indicates a TryCatchStatement with the "promise"
prediction.
The previous implementation of using the function to tell the relevant
try-catch apart from inner try-catch blocks will not work for async functions
since these can have inner try-catch blocks inside the same function.
BUG=v8:5167
Review-Url: https://codereview.chromium.org/2161263003
Cr-Commit-Position: refs/heads/master@{#37966}
See discussion in https://codereview.chromium.org/2156303002/#msg8
With the new --harmony-function-tostring behavior, these tests would
fail without this change. This change makes the tests pass regardless
of whether or not --harmony-function-tostring is used.
All of these changes are simply inserting a space after the "function"
keyword to match the current function toString behavior. When
--harmony-function-tostring is enabled, the toString behavior matches
the spacing used in the function declaration. With the declaration
matching the current formatting, the toString behavior becomes
unaffected by --harmony-function-tostring.
BUG=v8:4958
LOG=n
Review-Url: https://codereview.chromium.org/2161413002
Cr-Commit-Position: refs/heads/master@{#37959}
This cl also fixes two bugs in the previous code:
1) JITed functions were not allowed access to the heap because the module instance wasn't correctly synthesized. This wasn't discovered in the previous test.
2) Decoding of functions with the JITSingleFunction opcode was off by 1 as the length of the opcode wasn't computed correctly.
BUG=5044
Review-Url: https://codereview.chromium.org/2168183002
Cr-Commit-Position: refs/heads/master@{#37957}
Replace the zonelist with a link from a scope to any of its inner scopes, and a link to any sibling scope.
This makes scopes that track inner scopes use roughly the same amount of space as previously scopes without inner scopes would use for the empty zonelist (pointer to the memory + length field, which, granted could be slightly smaller on 64bit).
BUG=v8:5209
Review-Url: https://codereview.chromium.org/2162143005
Cr-Commit-Position: refs/heads/master@{#37941}
Use the ForInFilterStub directly. Hence we will only jump to the runtime for
special receivers (instance_type <= LAST_SPECIAL_RECEIVER_TYPE) and for
converting element indices which are not in the string cache.
BUG=
Review-Url: https://codereview.chromium.org/2151773002
Cr-Commit-Position: refs/heads/master@{#37934}
Move VisitLiteral to decide what type of literal is being emitted by
checking the raw ASTValue type, instead of the internalized on-heap
value. This is required for concurrent bytecode generation.
As part of this change, the NUMBER AstValue constructor is modified to
try to convert numbers without a dot to SMIs where possible. This is to
maintain the behavior in NewNumber where such numbers are internalized as
SMIs, and ensures that we still emit LdaSmi bytecodes for these values
in the generated bytecode.
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2152853002
Cr-Commit-Position: refs/heads/master@{#37931}
This removes a duplicate control scope. The visitor for ForOfStatement
nodes in the AST uses VisitIterationBody which pushes a separate control
scope. The number of control scopes will be off when we use them for
tracking loop depths.
R=rmcilroy@chromium.org
Review-Url: https://codereview.chromium.org/2164503005
Cr-Commit-Position: refs/heads/master@{#37930}
Reason for revert:
Breaks tsan:
https://build.chromium.org/p/client.v8/builders/V8%20Linux64%20TSAN/builds/10758
Original issue's description:
> [Intepreter] Always use BytecodeGraphBuilder when --turbo-from-bytecode
>
> Always use the BytecodeGraphBuilder when the --turbo-from-bytecode
> is enabled, assuming the function should be compiled for Ignition.
> Adds a new MaybeOptimizeIgnition function to runtime-profiler
> which is called if the function should be optimized from bytecode
> rather than going via full-codegen.
>
> BUG=v8:4280
>
> Committed: https://crrev.com/9ca7db914be88e6792a88eab4a1988ee031d70c4
> Cr-Commit-Position: refs/heads/master@{#37921}
TBR=mstarzinger@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review-Url: https://codereview.chromium.org/2165223002
Cr-Commit-Position: refs/heads/master@{#37925}
Always use the BytecodeGraphBuilder when the --turbo-from-bytecode
is enabled, assuming the function should be compiled for Ignition.
Adds a new MaybeOptimizeIgnition function to runtime-profiler
which is called if the function should be optimized from bytecode
rather than going via full-codegen.
BUG=v8:4280
Review-Url: https://codereview.chromium.org/2156753002
Cr-Commit-Position: refs/heads/master@{#37921}
The optimizing compilers actually invoke %TransitionElementsKind for
any kind of JSObject, the only relevant thing is the elements kind.
The runtime function was however checking for JSArray unnecessarily.
This only worked by coincindence in Crankshaft because the stub would
normally not call into the runtime fallback.
R=jarin@chromium.org
BUG=chromium:629823
Review-Url: https://codereview.chromium.org/2166963004
Cr-Commit-Position: refs/heads/master@{#37919}
