For wasm modules with non-absolute sourceMappingURL, the source needs
to be empty so that devtools can look for the source map at the origin
of the module.
R=clemensh@chromium.org,adamk@chromium.org
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I74c40addc1a7cb1be0442e9f2b272590c0b81f60
Reviewed-on: https://chromium-review.googlesource.com/1250402
Commit-Queue: Aseem Garg <aseemgarg@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56326}
Following up on the earlier work regarding redundant Smi checks in
https://chromium-review.googlesource.com/c/v8/v8/+/1246181, it was
noticed that the handling of the 0 and -0 and how some operations
identify these is not really consistent, but was still rather ad-hoc.
This change tries to unify the handling a bit by making sure that all
number comparisons generally pass truncations that identify zeros, since
for the number comparisons in JavaScript there's no difference between
0 and -0. In the same spirit NumberAbs and NumberToBoolean should also
pass these truncations, since they also don't care about the differences
between 0 and -0.
Adjust NumberCeil, NumberFloor, NumberTrunc, NumberMin and NumberMax
to pass along any incoming kIdentifiesZeros truncation, since these
operations also don't really care whether the inputs can be -0 if the
use nodes don't care.
Also utilize the kIdentifiesZeros truncation for NumberModulus with
Signed32 inputs, because it's kind of common to do something like
`x % 2 === 0`, where it doesn't really matter whether `x % 2` would
eventually produce a negative zero (since that would still be considered
true for the sake of the comparison).
This also adds a whole lot of tests to ensure that not only are these
optimizations correct, but also that we do indeed perform them.
Drive-by-fix: The `NumberAbs(x)` would incorrectly lower to just `x` for
PositiveIntegerOrMinusZeroOrNaN inputs, which was obviously wrong in
case of -0. This was fixed as well, and an appropriate test was added.
The reason for the unification is that with the introduction of Word64
for CheckBounds (which is necessary to support large TypedArrays and
DataViews) we can no longer safely pass Word32 truncations for the
interesting cases, since the index might be outside the Signed32 or
Unsigned32 ranges, but we still identify 0 and -0 for the sake of the
bounds check, and so it's important that this is handled consistently
to not regress performance on TypedArrays and DataViews accesses.
Bug: v8:8015, v8:8178
Change-Id: Ia1d32f1b726754cea1e5793105d9423d84a6393a
Reviewed-on: https://chromium-review.googlesource.com/1246172
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56325}
Picking a few low-hanging fruits.
Bug: v8:7790
Change-Id: I798d579b1f1a08fab821e159d08f453d2dad89c1
Reviewed-on: https://chromium-review.googlesource.com/1254124
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56320}
The protector is useful for follow-up optimizations on string iterator.
Tests are also added.
Change-Id: I416037c742628c4d4d3b878d0df727a9ae7162f7
Reviewed-on: https://chromium-review.googlesource.com/1251122
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Hai Dang <dhai@google.com>
Cr-Commit-Position: refs/heads/master@{#56315}
Delay the creation of FunctionNameVariables until we validated the
FormalParameters. This is needed so we don't declare them in cases where
we later get an error, have to reset, and reparse.
Bug: chromium:890553, v8:7926
Change-Id: I742e6f7f71158e3903843bd583dc7943468c18f6
Reviewed-on: https://chromium-review.googlesource.com/1254061
Reviewed-by: Marja Hölttä <marja@chromium.org>
Commit-Queue: Florian Sattler <sattlerf@google.com>
Cr-Commit-Position: refs/heads/master@{#56314}
It was shipped in Chrome 67.
Bug: v8:6791, v8:8238
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;luci.chromium.try:linux_chromium_rel_ng;luci.v8.try:v8_linux_noi18n_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I94d8f0aa18570452403a35dea270b18f155c970a
Reviewed-on: https://chromium-review.googlesource.com/1253604
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Mathias Bynens <mathias@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56310}
Currently, we call the MapRef::AsElementsKind method on an initial
map multiple times (from JSCreateLowering::ReduceJSCreateArray).
However, this does not does not play well with the heap copier/broker,
which only expectes AsElementsKind to be called on initial maps.
This CL makes sure we only call AsElementsKind once (on the initial map).
Bug: chromium:890620
Change-Id: If44421d3900abb7629ea8f789a005b8d8ebaf881
Reviewed-on: https://chromium-review.googlesource.com/1253105
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56307}
This reverts commit c285380ca8.
Reason for revert: Lots of dcheck failures on GPU bots, e.g.:
https://ci.chromium.org/p/v8/builders/luci.v8.ci/Win%20V8%20FYI%20Release%20(NVIDIA)/1997https://ci.chromium.org/p/v8/builders/luci.v8.ci/Linux%20V8%20FYI%20Release%20(NVIDIA)/2770
Original change's description:
> Create a fast path to get migration target when updating map
>
> During map updating, store the pointer to new map in the
> raw_transitions slot of the old map that is deprecated from map
> transition tree. Thus, we can get the migration target directly
> instead of TryReplayPropertyTransitions when updating map.
>
> This can improve Speedometer2.0 Elm-TodoMVC case by ~5% on ATOM
> Chromebook and ~9% on big-core Ubuntu.
>
> Change-Id: I56f9ce5183bbdd567b964890f623ef0ceed9b7db
> Reviewed-on: https://chromium-review.googlesource.com/1233433
> Commit-Queue: Shiyu Zhang <shiyu.zhang@intel.com>
> Reviewed-by: Igor Sheludko <ishell@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#56303}
TBR=ishell@chromium.org,shiyu.zhang@intel.com
Change-Id: I9b268d662cfa3a7fec577468eafe6570389252bc
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/1253104
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56305}
The representation changer was lacking support for directly converting
Word64 values to Bit representation.
Bug: chromium:890243, v8:4153, v8:7881, v8:8171, v8:8178
Change-Id: I5fa31716c7b2b10ad00dc31d5035a1ada152661c
Reviewed-on: https://chromium-review.googlesource.com/1251551
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56304}
During map updating, store the pointer to new map in the
raw_transitions slot of the old map that is deprecated from map
transition tree. Thus, we can get the migration target directly
instead of TryReplayPropertyTransitions when updating map.
This can improve Speedometer2.0 Elm-TodoMVC case by ~5% on ATOM
Chromebook and ~9% on big-core Ubuntu.
Change-Id: I56f9ce5183bbdd567b964890f623ef0ceed9b7db
Reviewed-on: https://chromium-review.googlesource.com/1233433
Commit-Queue: Shiyu Zhang <shiyu.zhang@intel.com>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56303}
This CL mirrors the ia32 SIMD conversion, Alltrue/AnyTrue operations
with minor cleanliness changes to use TempRegisters instead of
ScratchRegisters
Change-Id: I84d3e148200dd611a72380b24404b75c73c5352d
Reviewed-on: https://chromium-review.googlesource.com/1174096
Commit-Queue: Deepti Gandluri <gdeepti@chromium.org>
Reviewed-by: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56297}
Sometimes we do not have promise on stack, e.g. Promise.reject call,
but we need to attribute this pause with promise rejection.
TBR=yangguo@chromium.org
Bug: chromium:755728
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I03ca1e1cd6c21677f0a12ece626e2c8a1938437b
Reviewed-on: https://chromium-review.googlesource.com/1249942
Reviewed-by: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56293}
It was accidentally removed in CL that introduced BoundedPageAllocator.
This CL also cleans up the CodeRangeAddressHint a bit.
Bug: v8:8096, chromium:887252
Change-Id: Idc84796dd1ff1b440cbe3515732984264defcf2d
Reviewed-on: https://chromium-review.googlesource.com/1249125
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56287}
Trimming may free up some allocatable pages that can be reused by subsequent
allocations.
This CL also fixes base::AddressRegion::contains(Address, size_t).
Bug: v8:8096
Change-Id: I3b7381fd32f7dbf186dffc1a26d5a88cd8a30d2f
Reviewed-on: https://chromium-review.googlesource.com/1249127
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56284}
PreParser now does not longer track which kind of error occurred.
If we see an error we reparse with the parser and report the error.
Furthermore, this fixes tests in test-parsing.
Change-Id: I1860949fab4d65ff4a5a1b63796c7574494f9d50
Reviewed-on: https://chromium-review.googlesource.com/1231173
Commit-Queue: Florian Sattler <sattlerf@google.com>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56281}
Bug: chromium:890057
Change-Id: I98bc278ebc202c3d8f6417367bd1c592e4824011
Reviewed-on: https://chromium-review.googlesource.com/1250481
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56279}
test/cctest/compiler/value-helper.h: fix due to a GCC bug affecting padding
of aggregate data types on Aix.
GCC bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61976
Change-Id: I303b09a9a84b372033c16cbf157d5fc2bf25f93a
Reviewed-on: https://chromium-review.googlesource.com/1244616
Reviewed-by: Daniel Clifford <danno@chromium.org>
Reviewed-by: Junliang Yan <jyan@ca.ibm.com>
Commit-Queue: Junliang Yan <jyan@ca.ibm.com>
Cr-Commit-Position: refs/heads/master@{#56274}
This is a reland of eccf186749
Original change's description:
> [interpreter] Separate bytecodes for one-shot property loads and stores
>
> Create LdaNamedPropertyNoFeedback and StaNamedPropertyNoFeedback
> for one-shot property loads and stores. This CL replaces the runtime
> calls with new bytecodes for named property load stores in one-shot code.
> the runtime calls needed extra set of consecutive registers and
> additional move instructions. This increased the size of
> bytecode-array and possibly extended the life time of objects.
> By replacing them with NoFeedback bytecodes we avoid these issues.
>
> Bug: v8:8072
> Change-Id: I20a38a5ce9940026171d870d354787fe0b7c5a6f
> Reviewed-on: https://chromium-review.googlesource.com/1196725
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Commit-Queue: Chandan Reddy <chandanreddy@google.com>
> Cr-Commit-Position: refs/heads/master@{#56211}
Bug: v8:8072
Change-Id: Ie8e52b37daf35c7bc08bb910d7b15a9b783354e4
Reviewed-on: https://chromium-review.googlesource.com/1245742
Commit-Queue: Chandan Reddy <chandanreddy@google.com>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56266}
This adds a stress test for the I64 variants of the
AtomicCompareExchange opcodes.
Bug: v8:6532
Change-Id: Iaba4f31f944a71393e5c3222d364d214ff482b9e
Reviewed-on: https://chromium-review.googlesource.com/1235913
Commit-Queue: Stephan Herhut <herhut@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56261}
- Add a new broker mode kRetired, in which the heap can
again be accessed.
- Change the way modes work. We now always start in kDisabled.
If FLAG_concurrent_compiler_frontend is on, we eventually move
to kSerializing, then to kSerialized, then to kRetired.
- Add an ObjectDataKind to ObjectData that indicates whether the
data is just a dummy (i.e. created while broker was in kDisabled
mode).
This also happens to fix a bug found by clusterfuzz.
Bug: v8:7790, chromium:889722
Change-Id: I38833fe7ad26d2d3efb15ba560576defb82f673a
Reviewed-on: https://chromium-review.googlesource.com/1245425
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56260}
Make {AllocateForCode} return an actual buffer, and move the OOM check
into that method. This allows us to generate more precise OOM messages.
R=mstarzinger@chromium.org
Change-Id: Ie9ed81248fe8068c92eec29a4911ffef43032de2
Reviewed-on: https://chromium-review.googlesource.com/1245769
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56258}
Surviving large objects are directly promoted to the old generation.
Bug: chromium:852420
Change-Id: I460649714544d4338e01085f487d4b70065ecfb5
Reviewed-on: https://chromium-review.googlesource.com/1238173
Commit-Queue: Hannes Payer <hpayer@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56237}
This reverts commit eccf186749.
Reason for revert: Speculative revert because it seems to introduce a pretty stable flake on gc stress tests, see https://bugs.chromium.org/p/v8/issues/detail?id=8229
Original change's description:
> [interpreter] Separate bytecodes for one-shot property loads and stores
>
> Create LdaNamedPropertyNoFeedback and StaNamedPropertyNoFeedback
> for one-shot property loads and stores. This CL replaces the runtime
> calls with new bytecodes for named property load stores in one-shot code.
> the runtime calls needed extra set of consecutive registers and
> additional move instructions. This increased the size of
> bytecode-array and possibly extended the life time of objects.
> By replacing them with NoFeedback bytecodes we avoid these issues.
>
> Bug: v8:8072
> Change-Id: I20a38a5ce9940026171d870d354787fe0b7c5a6f
> Reviewed-on: https://chromium-review.googlesource.com/1196725
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Commit-Queue: Chandan Reddy <chandanreddy@google.com>
> Cr-Commit-Position: refs/heads/master@{#56211}
TBR=rmcilroy@chromium.org,yangguo@chromium.org,jarin@chromium.org,neis@chromium.org,cbruni@chromium.org,chandanreddy@google.com
Change-Id: I445db58e6d4c275b434fabad5fad775bf259033f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:8072
Reviewed-on: https://chromium-review.googlesource.com/1245421
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56232}
Atomics.{load,store,add,sub,and,or,xor,exchange,compareExchange}
are updated to support BigInt and BigInt64Array/BigUint64Array inputs.
Atomics.{wait,wake,isLockFree} are left unchanged for now.
Bug: v8:8100
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: I8862d7e18c58ae08784535e9c010ba94f067a0ee
Reviewed-on: https://chromium-review.googlesource.com/1237294
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56228}
The CHECK was introduced in d7ae63e6f2.
The first time the property got read by ToDateTimeOptions
and the test will cause the needsDefault in ToDateTimeOptions
be false. Then in step 22 of InitializeDateTimeFormat,
it will get all undefined and cause the
skeleton to be empty string. If we only pass in empty options, the
defaults will be filled by ToDateTimeOptions and won't cause any
CHECK failure.
Bug: chromium:888299
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: I3ee14434f0708eaaea78cc8857591152d1bdef8a
Reviewed-on: https://chromium-review.googlesource.com/1241316
Commit-Queue: Frank Tang <ftang@chromium.org>
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56226}
This is a reland of bcb8d49b2cTBR=petermarshall@chromium.org
Original change's description:
> [snapshot] add checksum to startup snapshot
>
> We already had checksumming for code cache data. We now extend
> checksumming to the startup snapshot to catch data corruption early.
>
> The performance impact for deserialization is a regression of 1-2%,
> which should be acceptable.
>
> Sample output for the included test with --profile-deserialization:
>
> [Verifying snapshot checksum took 0.023 ms]
> [Deserializing isolate (134348 bytes) took 1.891 ms]
> [Verifying snapshot checksum took 0.024 ms]
> [Deserializing isolate (134348 bytes) took 1.654 ms]
> [Deserializing context #0 (47208 bytes) took 0.331 ms]
> Deserialization will reserve:
> 208168 bytes per isolate
> 123368 bytes per context #0
> Snapshot blob consists of:
> 134492 bytes in 6 chunks for startup
> 115272 bytes for builtins
> 47152 bytes in 31 chunks for context #0
> [Verifying snapshot checksum took 0.048 ms]
> [Verifying snapshot checksum took 0.043 ms]
>
> R=peria@chromium.org, petermarshall@chromium.org
>
> Bug: chromium:881417
> Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
> Change-Id: Ibc57520d459c86be8972f731aa35045b5e3751d7
> Reviewed-on: https://chromium-review.googlesource.com/1241874
> Reviewed-by: Peter Marshall <petermarshall@chromium.org>
> Commit-Queue: Yang Guo <yangguo@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#56217}
Bug: chromium:881417
Change-Id: I037f378fc2d45c3e0fa670bf538df68cbba5c53c
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/1243191
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56224}
This reverts commit bcb8d49b2c.
Reason for revert: MSan compile error: https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8%20Linux%20-%20arm64%20-%20sim%20-%20MSAN/23025
Original change's description:
> [snapshot] add checksum to startup snapshot
>
> We already had checksumming for code cache data. We now extend
> checksumming to the startup snapshot to catch data corruption early.
>
> The performance impact for deserialization is a regression of 1-2%,
> which should be acceptable.
>
> Sample output for the included test with --profile-deserialization:
>
> [Verifying snapshot checksum took 0.023 ms]
> [Deserializing isolate (134348 bytes) took 1.891 ms]
> [Verifying snapshot checksum took 0.024 ms]
> [Deserializing isolate (134348 bytes) took 1.654 ms]
> [Deserializing context #0 (47208 bytes) took 0.331 ms]
> Deserialization will reserve:
> 208168 bytes per isolate
> 123368 bytes per context #0
> Snapshot blob consists of:
> 134492 bytes in 6 chunks for startup
> 115272 bytes for builtins
> 47152 bytes in 31 chunks for context #0
> [Verifying snapshot checksum took 0.048 ms]
> [Verifying snapshot checksum took 0.043 ms]
>
> R=peria@chromium.org, petermarshall@chromium.org
>
> Bug: chromium:881417
> Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
> Change-Id: Ibc57520d459c86be8972f731aa35045b5e3751d7
> Reviewed-on: https://chromium-review.googlesource.com/1241874
> Reviewed-by: Peter Marshall <petermarshall@chromium.org>
> Commit-Queue: Yang Guo <yangguo@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#56217}
TBR=peria@chromium.org,yangguo@chromium.org,petermarshall@chromium.org
Change-Id: Iccb82092858ab68a5d6ae9552fa716108eda354b
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:881417
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/1243190
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56221}
For WASM import calls to JSFunctions where the arity is mismatched,
we currently generate code that inlines the formal parameter count
of the target function as a constant in a call to the arguments
adapter. This CL changes this to generate code that loads the formal
parameter count from the function at runtime in order to permit
more sharing later.
R=mstarzinger@chromium.orgCC=clemensh@chromium.org
Change-Id: I5cce97fc338f6468f9d42d48f5bc860b25fb7d73
Reviewed-on: https://chromium-review.googlesource.com/1243108
Commit-Queue: Ben Titzer <titzer@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56220}
I moved AnalyzePartially from ParseFunctionLiteral to SkipFunction, but arrow
functions only used the ResetAfterPreparsing part.
Bug: chromium:888825
Change-Id: I08de99af128b28031df6ed86a725e4dc918078f8
Reviewed-on: https://chromium-review.googlesource.com/1243383
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56218}
We already had checksumming for code cache data. We now extend
checksumming to the startup snapshot to catch data corruption early.
The performance impact for deserialization is a regression of 1-2%,
which should be acceptable.
Sample output for the included test with --profile-deserialization:
[Verifying snapshot checksum took 0.023 ms]
[Deserializing isolate (134348 bytes) took 1.891 ms]
[Verifying snapshot checksum took 0.024 ms]
[Deserializing isolate (134348 bytes) took 1.654 ms]
[Deserializing context #0 (47208 bytes) took 0.331 ms]
Deserialization will reserve:
208168 bytes per isolate
123368 bytes per context #0
Snapshot blob consists of:
134492 bytes in 6 chunks for startup
115272 bytes for builtins
47152 bytes in 31 chunks for context #0
[Verifying snapshot checksum took 0.048 ms]
[Verifying snapshot checksum took 0.043 ms]
R=peria@chromium.org, petermarshall@chromium.org
Bug: chromium:881417
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: Ibc57520d459c86be8972f731aa35045b5e3751d7
Reviewed-on: https://chromium-review.googlesource.com/1241874
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56217}
.. otherwise V8 crashes on attempt to use imported function as part
of expression passed to Debugger.evaluateOnCallFrame.
R=neis@chromium.org
Bug: chromium:878029
Cq-Include-Trybots: luci.chromium.try:linux_chromium_headless_rel;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: I61b837f5c7b84a80d91a9cdaaac0422a24aa1620
Reviewed-on: https://chromium-review.googlesource.com/1241475
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56216}
This CL makes UnoptimizedCompilationJob a simple proxy for
BackgroundCompilerTask. A follow-up CL will remove UnoptimizedCompilationJob
entirely and have CompilerDispatcher deal directly with BackgroundCompilerTasks
BUG=v8:8041, v8:8015
Change-Id: Ia53d05c015c4ca2ee32a4d1c5d0c65edb3caeda8
Reviewed-on: https://chromium-review.googlesource.com/1236257
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56212}
