The previous CL https://crrev.com/c/3069152 only did a pointer equality
check for host defined options. This broke code caching for chrome.
This CL extends the check to use a shallow strict equals check on the
host defined options elements.
Bug: v8:10284, chromium:1237242
Change-Id: Ie0ab17a5f5abe024061b6c3d3d68367d9e92b78b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3081607
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76169}
Design doc: https://bit.ly/36MfD6Y, section "Improving Computational
Complexity of CSALoadElimination".
We optimize CsaLoadElimination::AbstractState::KillField() by
fine-graining AbstractState. We now represent it with 6 maps
corresponding to (object kind, offset kind) pairs. This makes it
possible for KillField() to manipulate the state faster. For more
information consult the above design doc.
Bug: v8:11510
Change-Id: I7d991cd47f946edb20e746bc7e6792ae3c70004f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3038521
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76165}
Rather than depending on slow signature checks, receiver type checks are
performed using fast numeric instance type checks.
This CL adds a instance type range for embedders to assign values and
uses these to perform type checks.
Bug: v8:11476
Change-Id: Ie8236ae47ca0ba93ae76a7e690b81aa0a2b0f3e2
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2883623
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76162}
To consume a code cache off-thread
1. The embedder creates a CachedData object wrapping the data blob.
2. The embedder calls ScriptCompiler::StartConsumingCodeCache with the
CachedData, and receives a ScriptCompiler::CodeCacheConsumeTask
which takes ownership of the CachedData.
3. The embedder calls ScriptCompiler::CodeCacheConsumeTask::Run
on a different thread.
4. Once this completes, the embedded passes the completed task as an
optional argument into Source constructor, and calls Compile as
before.
This is roughly similar to how streaming compilation works, with the
QoL improvement that Source owns the CodeCacheConsumeTask and therefore
we can reuse the same Compile method and do the off-thread finalization
behind the scenes inside Compile.
On the v8::internal side, ScriptCompiler::CodeCacheConsumeTask wraps a
v8::internal::BackgroundDeserializeTask, which has a Run and a Finish
method. The Run creates a LocalIsolate (again, similar to
BackgroundCompileTask), calls some helpers on CodeSerializer, and stores
the pre-finalization result in a OffThreadDeserializeData structure.
This stores Persistent Handles to the off-thread initialized SFI and
a vector of Scripts needing fixing up, and it owns the PersistentHandles
object which owns those Handles. Finally, the Finish method consumes
this OffThreadDeserializeData structure, fixes up Scripts, moves the
SFI Handle into the caller HandleScope, and that's it.
Since we don't yet have the source at off-thread deserialization time,
the various code cache sanity checks are done without the source hash
when deserializing, and the Finish method re-does them now that the
source is available.
Bug: chromium:1075999
Change-Id: If1faf35ba3ef840fa4e735581d0b29c96c1d5fc8
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3067322
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76155}
Adds a minimum estimated size.
Data suggests that estimated instruction size (+ relocation info size)
is linear to bytecode array length. This CL adds a constant for this
equation. The ratio remains the same.
This is important, because we want to increase success rate of
estimation when compiling on-heap.
When off-heap, we round up the assembler buffer to 4kB, so this CL
will only impact JS functions with more than 585 bytecodes, i.e, the
new added constant will be negligible.
Note: Relocation info (for Sparkplug) is usually so small that it is
not useful to have a separate zone for this.
Bug: v8:11872
Change-Id: I789e72f80b970d1f541965e7ae808b61c8174326
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3069155
Auto-Submit: Victor Gomes <victorgomes@chromium.org>
Commit-Queue: Victor Gomes <victorgomes@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76144}
C++ frames can get quite big in sanitizer builds. In the linked bug it
was an ASan debug build, which overflowed the stack by more than 8kB
just from C++ frames (when entering the runtime, there was no overflow
yet).
Hence increase the allowed stack overflow a bit for sanitizer builds,
from 8kB to 32kB.
R=jkummerow@chromium.org
Bug: chromium:1236560
Change-Id: I119fdb859f7ab5e6a0a4174cf79f0a16baa39432
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3078359
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76142}
So that it is possible to differentiate modules in the stack trace even
when they are anonymous.
R=kimanh@chromium.org
Bug: v8:11808
Change-Id: I12a1f07accdf62c404052f32624e9914381a7451
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3074472
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Reviewed-by: Kim-Anh Tran <kimanh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76141}
Firstly, the fast path checking for applicability of the equality
"A/B = 0 with remainder A" must use the condition "A<B", not "A<=B".
Secondly, *all* early return paths must ensure that enough padding
'0' characters are written.
Fixed: chromium:1236694
Bug: v8:11515
Change-Id: I3fa7e17f5f3969ddbb5417b53abf3bff3fc1355b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3075365
Reviewed-by: Adam Klein <adamk@chromium.org>
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76139}
This reverts commit fffcbaea55.
Reason for revert: Breaks in Chromium (e.g. https://ci.chromium.org/p/v8/builders/ci/Linux%20V8%20FYI%20Release%20%28NVIDIA%29)
Original change's description:
> [counters] Fix reentrant timers for V8.Execute
>
> This CL fixes a long standing issue where reentering TimedHistograms
> scopes would cause spurious measurements. Only the non-nested scopes
> yielded correct results.
>
> Due to the changed numbers, the V8.Execute histogram is renamed to
> V8.ExecuteMicroSeconds. Note that this histogram is also guarded
> behind the --slow-histograms flag due to the additional overhead.
>
> Unlike before, it does no longer include time for external callbacks
> and only measures self time. The following example illustrates the
> new behaviour:
>
> 1. Enter V8: |--+.......+--| self-time: 4 units (reported)
> 2. Exit V8 (callback): |-+...+-| self-time: 2 units (ignored)
> 3. Re-enter V8: |---| self-time: 3 units (reported)
>
> This would result in 2 histogram entries with 4 time units for the first
> V8 slice and 3 units for the nested part. Note that the callback time
> itself is ignored.
>
> This CL attempts to clean up how TimedHistograms work:
> - Histogram: the base class
> - TimedHistograms: used for time-related histograms that are not nested
> - NestedTimeHistograms: Extends TimedHistograms and is used for nested
> histograms
>
> This CL changes Histograms to not measure time themselves. Measurements
> happen in the *HistogramScopes:
> - BaseTimedHistogramScope: Base functionality
> - TimedHistogramScope: For non-nested measurements
> - NestedTimedHistogramScope: For nested measurements
> - PauseNestedTimedHistogramScope: Ignore time during a given scope.
> This is used to pause timers during callbacks.
>
> Additional changes:
> - ExternalCallbackScope now contains a PauseNestedTimedHistogramScope
> and always sets VMState<EXTERNAL>
>
> Bug: v8:11946
> Change-Id: I45e4b7ff77b5948b605dd50539044cb26222fa21
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3001345
> Reviewed-by: Omer Katz <omerkatz@chromium.org>
> Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
> Reviewed-by: Victor Gomes <victorgomes@chromium.org>
> Reviewed-by: Leszek Swirski <leszeks@chromium.org>
> Commit-Queue: Camillo Bruni <cbruni@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#76111}
Bug: v8:11946
Change-Id: I954de1afbabf101fb5d4f52eca0d3b80a723385b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3077153
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Owners-Override: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76138}
We add support for struct and arraytypes in wasm-fuzzer-common.
Also, we add addStruct and addArray while generating tests.
Other OptRef types like eqref/anyref have been supported.
Adding struct and arraytypes in wasm-compile has been placed
at the beginning in order to generate them in addSignature.
Bug: v8:11954
Change-Id: Ibe468dd4df70ad40367196c88353b28b7654f086
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3074463
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Reviewed-by: Manos Koukoutos <manoskouk@chromium.org>
Commit-Queue: Rakhim Khismet <khismet@google.com>
Cr-Commit-Position: refs/heads/master@{#76137}
We would like to use the name CompilerDispatcher for dispatcher base
class to be used by Sparkplug and OptimizingCompileDispatcher.
Bug: v8:12054
Change-Id: Id69955101c1f46fc2f79b6f77b05c92ed8a31edb
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3077150
Commit-Queue: Victor Gomes <victorgomes@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76136}
This patch makes V8 accept the binary format produced by Binaryen
after https://github.com/WebAssembly/binaryen/pull/3933 when the
--experimental-wasm-gc-experiments flag is present. The explicit
inheritance information is not used for anything. Validation is
performed only insofar as explicit supertypes must be valid types.
Bug: v8:7748
Change-Id: Id5b5050aa03591281632e3a2a161aa93422e10bd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3071406
Reviewed-by: Manos Koukoutos <manoskouk@chromium.org>
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76135}
This was handled in JS but not in C++.
Bug: chromium:236703, v8:11025
Change-Id: Ic9adc4ceb4d2af2614427fec459c3e950654572f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3074460
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Victor Gomes <victorgomes@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76125}
Generate the test case before compilation, so that we can generate it
even if compilation crashes.
We can only do this when require_valid is true. Otherwise the test case
depends on whether the module compiles or not.
R=ahaas@chromium.org
CC=khismet@google.com
Bug: v8:11954
Change-Id: I944e867cc7ca631bff749bd67c4b8baff1df1fa9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3074476
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76123}
Bug: v8:7790
Change-Id: Ia5903364a774bd49db1a646b3066b9972deac725
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3074465
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76119}
Forgot to do this in crrev.com/c/3067226.
Bug: v8:7790,v8:12030
Change-Id: Ic6fbf3feb07e8d08f0fd83d76d54535387c7a27c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3074464
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76117}
Optimizing compilation can no longer collect source positions on demand
since it may now run concurrently without serialization.
Instead, we now collect full source positions when any component that
needs them is enabled (profiler, debugger).
Bug: v8:7790,v8:12030
Change-Id: I6a2a82eb2b0d3e92121e101b4d9bf330c1f6c065
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3067226
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76114}
This CL fixes a long standing issue where reentering TimedHistograms
scopes would cause spurious measurements. Only the non-nested scopes
yielded correct results.
Due to the changed numbers, the V8.Execute histogram is renamed to
V8.ExecuteMicroSeconds. Note that this histogram is also guarded
behind the --slow-histograms flag due to the additional overhead.
Unlike before, it does no longer include time for external callbacks
and only measures self time. The following example illustrates the
new behaviour:
1. Enter V8: |--+.......+--| self-time: 4 units (reported)
2. Exit V8 (callback): |-+...+-| self-time: 2 units (ignored)
3. Re-enter V8: |---| self-time: 3 units (reported)
This would result in 2 histogram entries with 4 time units for the first
V8 slice and 3 units for the nested part. Note that the callback time
itself is ignored.
This CL attempts to clean up how TimedHistograms work:
- Histogram: the base class
- TimedHistograms: used for time-related histograms that are not nested
- NestedTimeHistograms: Extends TimedHistograms and is used for nested
histograms
This CL changes Histograms to not measure time themselves. Measurements
happen in the *HistogramScopes:
- BaseTimedHistogramScope: Base functionality
- TimedHistogramScope: For non-nested measurements
- NestedTimedHistogramScope: For nested measurements
- PauseNestedTimedHistogramScope: Ignore time during a given scope.
This is used to pause timers during callbacks.
Additional changes:
- ExternalCallbackScope now contains a PauseNestedTimedHistogramScope
and always sets VMState<EXTERNAL>
Bug: v8:11946
Change-Id: I45e4b7ff77b5948b605dd50539044cb26222fa21
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3001345
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Reviewed-by: Victor Gomes <victorgomes@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76111}
The number of arguments for the LiftoffCompiler has grown significantly
since its initial implementation, and it becomes hard to keep track of
all options at the call sites.
This CL refactors all optional parameters into a {LiftoffOptions} struct
which has a factory-like interface.
This will allow us to add more options in the future, e.g. for dynamic
tiering.
R=thibaudm@chromium.org
Change-Id: I66697bb2f99b676a84c158304cc3a285e1b077d0
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3069148
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76098}
For inline scripts that have a `// #sourceURL=foo.js` annotation, the
V8 inspector (and by extension `Error.stack`) currently operates in
terms of the `foo.js`, i.e. doesn't give any hint about the actual
source, except for the line/column offsets reported upon scriptParsed.
However in case of stack frames (i.e. as part of `Error.stack` or as
part of the call frames reported via CDP), the line/column offsets are
relative to the actual source instead of relative to the `foo.js` part,
which - besides other things - makes post-processing of recorded stack
traces tricky (sometimes impossible).
This change adjusts the source positions reported for (inline) scripts
with sourceURL annotations to be relative to the (inline) script instead
of the surrounding document.
Bug: chromium:1183990
Fixed: chromium:578269
Change-Id: I74f2b93c22ec43ca796b6b51faa9df5b99cf03f9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3069289
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Simon Zünd <szuend@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76097}
Maximum frame size (in bytes) is used to check for stack overflows
in the prologue.
The maximum number of call arguments is pre-calculated and included
in this check. However the count was added to the frame size wihout
converting the count to bytes, resulting in inaccurate stack overflow
checks.
Bug: chromium:1235182
Change-Id: I21bca4e183fccfd055f2f1d5a40b71651c14b911
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3071399
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Patrick Thier <pthier@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76090}
The merge values of a block have to be initialized to their
static types, even if the actual values on the stack have
subtypes of the loop's static type.
Drive-by cleanup: drop some unneeded manual {TestModuleBuilder}
instantiations from existing tests. The test fixture provides
one anyway.
Bug: chromium:1234453
Change-Id: I39c7eae4b6a6d5124f29be92da5ee92ff7e20e57
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3068948
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76087}
This is a reland of ce8cef36aa
Original change's description:
> [inspector] Consistently format all native accessors as own properties.
>
> Previously the V8 inspector would only turn embedder accessors on the
> prototype chain into data properties, but would not do the same for
> ECMAScript builtins, which is kind of inconsistent and weird behavior.
>
> This leaves in the hack that the inspector reports native accessor
> properties as (own) data properties, but now at least the very least
> does so consistently. In the absence of a better solution, we'll go
> with this for now.
>
> Bug: chromium:1076820, chromium:1199247
> Change-Id: I593f909a46cb714dbec629a2944eeb892881ba6f
> Before: https://imgur.com/kPuSldj.png
> After: https://imgur.com/eFau45m.png
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3067319
> Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
> Reviewed-by: Kim-Anh Tran <kimanh@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#76059}
Bug: chromium:1076820, chromium:1199247
Change-Id: I11987194b0d0b8b250eda4f8ce0ae5fc743eb27c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3070701
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Kim-Anh Tran <kimanh@chromium.org>
Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Kim-Anh Tran <kimanh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76084}
These should be reenabled when the underlying issue is fixed.
Bug: v8:7790,v8:12031
Change-Id: Id950cceaa10209b17c2857d61183a2394638d6fc
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3068951
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Santiago Aboy Solanes <solanes@chromium.org>
Reviewed-by: Santiago Aboy Solanes <solanes@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76078}
Add support to flush only baseline code. FLAG_flush_baseline_code
controls if baseline code is flushed or not and FLAG_flush_bytecode
controls if bytecode is flushed or not. With this CL it is possible
to control if we want to flush only bytecode / only baseline code / both.
This also lets us have different heuristics for bytecode and baseline
code flushing.
Bug: v8:11947
Change-Id: Ibdfb9d8be7e7d54196db7890541fa0b5d84f037e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3060481
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Mythri Alle <mythria@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76075}
Invalid ref construction (should assume a memory fence), and invalid
unconditional use of an optional ref.
Bug: v8:7790,chromium:1236303,chromium:1236307
Change-Id: Id0a12222d3d29a0728290ad5269da0946647a5ca
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3070698
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76074}
Follow-up CLs will use the ScriptDetails object for code cache lookups
instead of only the ScriptOriginOptions.
Bug: v8:10284
Change-Id: Idc83e6e79cfca283369a9b5ceab8bc53dae5f2dd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3069149
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76073}
This reverts commit ce8cef36aa.
Reason for revert: broke blink tests: https://ci.chromium.org/ui/p/chromium/builders/try/mac-rel/751822/overview
Original change's description:
> [inspector] Consistently format all native accessors as own properties.
>
> Previously the V8 inspector would only turn embedder accessors on the
> prototype chain into data properties, but would not do the same for
> ECMAScript builtins, which is kind of inconsistent and weird behavior.
>
> This leaves in the hack that the inspector reports native accessor
> properties as (own) data properties, but now at least the very least
> does so consistently. In the absence of a better solution, we'll go
> with this for now.
>
> Bug: chromium:1076820, chromium:1199247
> Change-Id: I593f909a46cb714dbec629a2944eeb892881ba6f
> Before: https://imgur.com/kPuSldj.png
> After: https://imgur.com/eFau45m.png
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3067319
> Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
> Reviewed-by: Kim-Anh Tran <kimanh@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#76059}
Bug: chromium:1076820, chromium:1199247
Change-Id: Ib090e0a1dad26f5c9684d906b775555b6a07cca0
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3069012
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Kim-Anh Tran <kimanh@chromium.org>
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76071}
While reading through the jump threading implementation, I noticed
something strange: ApplyForwarding iterates through the block list in
reverse post-order, not in assembly order. Thus, the value prev_fallthru
might not refer to the previous block in assembly order. Obviously it
works fine this way or we would have noticed by now, but I think that
this step would be a little easier to read and reason about if the
iteration used assembly order instead.
I've added a test case to demonstrate the difference when using
assembly order: in a diamond where the right side starts with an empty
deferred block, the current implementation would fail to replace that
block with a nop. I doubt this case would have any real-world impact.
Change-Id: I28abe2043434debb54896871d15c540ad52c6368
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3039261
Commit-Queue: Seth Brenith <seth.brenith@microsoft.com>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76067}
Windows.h causes massive namespace pollution with its defining of many
macros, it adds to build times, it disables warnings, and it makes it
easier to write non-portable code.
This change removes windows.h from V8's win32-headers.h. It does this
by replicating the small number of typedefs that are needed and by
defining three "proxy" types that are the same size and layout. The
V8ToWindowsType functions are used to reinterpret_cast between the
types.
Prior to this change there were over 760 v8-related source files that
include windows.h. After this change there are 16.
Bug: chromium:796644
Change-Id: I89efeed47028faae72de2da4f1dae345d8d7746c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3042215
Commit-Queue: Bruce Dawson <brucedawson@chromium.org>
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76064}
Also introduce a separate error type for WebAssembly.Exception,
since the properties should not be added to RuntimeError.
R=jkummerow@chromium.org
Bug: v8:11992
Change-Id: I8f4ae0da9a95184366e07dc43e58a5a9ff4382ae
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3055304
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76061}
Previously the V8 inspector would only turn embedder accessors on the
prototype chain into data properties, but would not do the same for
ECMAScript builtins, which is kind of inconsistent and weird behavior.
This leaves in the hack that the inspector reports native accessor
properties as (own) data properties, but now at least the very least
does so consistently. In the absence of a better solution, we'll go
with this for now.
Bug: chromium:1076820, chromium:1199247
Change-Id: I593f909a46cb714dbec629a2944eeb892881ba6f
Before: https://imgur.com/kPuSldj.png
After: https://imgur.com/eFau45m.png
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3067319
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Kim-Anh Tran <kimanh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76059}
Based on a CL by mvstanton@.
Bug: v8:7790,v8:12030,v8:12031,v8:12041
Change-Id: I58b75bd96c724a99133bec7d3bd6cf4e0c9be6d4
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3059683
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76055}
This is a temp fix to throw instead of DCHECK in debug build.
The correct fix depends on the landing of
https://github.com/unicode-org/icu/pull/1762
Once that land I will cherrypick into chrome to fix the function correctly.
But the current (before this CL) behavior is not harmful in release build.
It basically does not do the max nor min just return itself.
Bug: chromium:1224869
Change-Id: Iebce2ab0a5ce047e83e8fce05db8290212e64509
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3017300
Reviewed-by: Shu-yu Guo <syg@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Frank Tang <ftang@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76047}
stress_flush_bytecode controls stress flushing of both bytecode and
baseline code. So rename the flag to better reflect its functionality
Bug: v8:11947
Change-Id: Ie6c124a476c3a7c6eabd1d75de030ee15fe78e32
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3062567
Commit-Queue: Mythri Alle <mythria@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76043}
Previously, when the Load IC saw a deprecated map, it would migrate to
the new map but not update the feedback vector. This would lead to a
deopt the next time the same object was seen.
With this CL, the feedback vector will be updated to the target of the
deprecated map. In order to do this, we need to mark the IC for
recomputation. Without that call, the map and handler would look the
same to IC::UpdatePolymorphicIC amd would decline to update, causing
the IC to go megamorphic instead.
Bug: v8:10816
Change-Id: I0dcf97fb278bc0b167df6ce24d5db179f599f535
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3032983
Reviewed-by: Mythri Alle <mythria@chromium.org>
Commit-Queue: Kevin Babbitt <kbabbitt@microsoft.com>
Cr-Commit-Position: refs/heads/master@{#76042}
Regressed in crrev.com/152ecad8cd4d170e4091a79eaa8d70d10d94734d.
Fixed: chromium:1234931
Change-Id: I8f2b603a914fccaeaeb3dcffa63070cf8fb6f0e3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3064604
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Auto-Submit: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76033}
A JSFunction object may count as 'ObjectMayBeUninitialized', yet still
be safe to read for other reasons (e.g. because it has been loaded
through a chain of acquire-loads and immutable-after-initialization
guarantees).
Bug: chromium:1235071,v8:7790
Change-Id: I18c81695f001fd67e69d98dde641b71ed7b7e53d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3064606
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76031}
