Adds back simple dead code elimination to the bytecode pipeline.
BUG=v8:4280,chromium:616064
Review-Url: https://codereview.chromium.org/2038083002
Cr-Commit-Position: refs/heads/master@{#37147}
Add explicit state in BytecodeSourceInfo to simplify checks for
validity and whether a statement or expression position.
Remove BytecodeSourceInfo::Update which inherited rules for updating
source position information during bytecode building.
BUG=v8:4280
LOG=N
Review-Url: https://codereview.chromium.org/2048203002
Cr-Commit-Position: refs/heads/master@{#37136}
Make intrinsic ids a contiguous set of ids so that the switch statement can build
a table switch rather than doing a large if/else tree.
BUG=v8:4822
LOG=N
Review-Url: https://codereview.chromium.org/2084623002
Cr-Commit-Position: refs/heads/master@{#37135}
Passing in the isolate and pointer compare the instnance against the
corresponding constant is always faster than decoding the instance types.
BUG=
Review-Url: https://codereview.chromium.org/2028983002
Cr-Commit-Position: refs/heads/master@{#36744}
This moves processing of jumps out of bytecode array builder and into
bytecode array writer. This simplifies the pipeline by avoiding having
to flush for offset and patch up offsets in bytecode array builder based
on what was emitted by the bytecode array writer.
This also enables future refactorings to add dead code elimination back
into the pipeline, and move processing of scalable operand sizes to the
end of the pipeline (in the bytecode array writer) rather than having to
deal with scalable operand types throughout pipeline.
BUG=v8:4280,chromium:616064
Review-Url: https://codereview.chromium.org/2035813002
Cr-Commit-Position: refs/heads/master@{#36716}
A value in unittests/Bytecodes.DecodeBytecodeAndOperands was 16 bit
instead of 8 bit. This was causing test to fail on big endian machines.
BUG=
Review-Url: https://codereview.chromium.org/2030063002
Cr-Commit-Position: refs/heads/master@{#36698}
A few values were missing use of a macro causing test to fail on big
endian machines.
BUG=
Review-Url: https://codereview.chromium.org/2024123002
Cr-Commit-Position: refs/heads/master@{#36645}
We get less "pollution" of type feedback if we have one vector per native
context, rather than one for the whole system. This CL moves the vector
appropriately.
BUG=
Review-Url: https://codereview.chromium.org/1906823002
Cr-Commit-Position: refs/heads/master@{#36539}
This change introduces five fused bytecodes for common bytecode
sequences on popular websites. These are LdrNamedProperty,
LdrKeyedProperty, LdrGlobal, LdrContextSlot, and LdrUndefined. These
load values into a destination register operand instead of the
accumulator. They are emitted by the peephole optimizer.
BUG=v8:4280
LOG=N
Review-Url: https://codereview.chromium.org/1985753002
Cr-Commit-Position: refs/heads/master@{#36507}
Previously, CodeStubAssembler macros performing FixedArray element accesses had
to compute offsets to elements explicitly with a fair amount of duplicated
code. Furthermore, any peephole optimizations that could produce better code--
like recognizing constant indices or combining array index computation with Smi
untagging--were also duplicated.
This change factors the code to compute FixedArray index offsets into a common
routine in the CodeStubAssembler that applies standard peephole optimizations to
all accesses. In order to do this, it also introduces limited introspection into
the up-until-now opaque Node* type exported from code-assembler.h, allowing
Nodes to be queried whether they are constant and extracting their constant
value in that case.
Review-Url: https://codereview.chromium.org/1989363004
Cr-Commit-Position: refs/heads/master@{#36370}
In order to support compiling to baseline on return we need to be able to
return to the actual return address. With this change this is what the
Return bytecode now does, removing the need for the
InterpreterExitTrampoline.
This change also removes the InterpreterNotifyDeoptXXX builtins and
unifies FCG and Igntion to both use NotifyDeoptXXX. As part of this
change, FullCodegenerator::State is moved to Deoptimize::BailoutState.
BUG=v8:4280
LOG=N
Committed: https://crrev.com/34c9626e2ee56fe805de549697ca5323aed7cb66
Cr-Commit-Position: refs/heads/master@{#36288}
Review-Url: https://codereview.chromium.org/1969423002
Cr-Commit-Position: refs/heads/master@{#36310}
Makes LogicalNot bytecode not do the ToBoolean operation, and add support in the
peephole optimizer to choose between the appropriate bytecode depending upon
whether the previous bytecode emitted a boolean or not.
BUG=v8:4280
LOG=N
Review-Url: https://codereview.chromium.org/1985033002
Cr-Commit-Position: refs/heads/master@{#36295}
Reason for revert:
Breaks
https://build.chromium.org/p/client.v8.ports/builders/V8%20Linux%20-%20arm%20-%20sim/builds/619
Might only affect pure release builds?
Original issue's description:
> [Interpreter] Remove InterpreterExitTrampoline and replace with returning to the entry trampoline.
>
> In order to support compiling to baseline on return we need to be able to
> return to the actual return address. With this change this is what the
> Return bytecode now does, removing the need for the
> InterpreterExitTrampoline.
>
> This change also removes the InterpreterNotifyDeoptXXX builtins and
> unifies FCG and Igntion to both use NotifyDeoptXXX. As part of this
> change, FullCodegenerator::State is moved to Deoptimize::BailoutState.
>
> BUG=v8:4280
> LOG=N
>
> Committed: https://crrev.com/34c9626e2ee56fe805de549697ca5323aed7cb66
> Cr-Commit-Position: refs/heads/master@{#36288}
TBR=mstarzinger@chromium.org,oth@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review-Url: https://codereview.chromium.org/1986353002
Cr-Commit-Position: refs/heads/master@{#36294}
In order to support compiling to baseline on return we need to be able to
return to the actual return address. With this change this is what the
Return bytecode now does, removing the need for the
InterpreterExitTrampoline.
This change also removes the InterpreterNotifyDeoptXXX builtins and
unifies FCG and Igntion to both use NotifyDeoptXXX. As part of this
change, FullCodegenerator::State is moved to Deoptimize::BailoutState.
BUG=v8:4280
LOG=N
Review-Url: https://codereview.chromium.org/1969423002
Cr-Commit-Position: refs/heads/master@{#36288}
This change introduces a pipeline for the final stages of
bytecode generation.
The peephole optimizer is made distinct from the BytecodeArrayBuilder.
A new BytecodeArrayWriter is responsible for writing bytecode. It
also keeps track of the maximum register seen and offers a potentially
smaller frame size.
R=rmcilroy@chromium.org
LOG=N
BUG=v8:4280
Review-Url: https://codereview.chromium.org/1947403002
Cr-Commit-Position: refs/heads/master@{#36220}
DevTools uses the debug interrupt to trap on function entry. Without
source position at the stack check, we would get bogus source positions.
R=mstarzinger@chromium.org
BUG=chromium:595646
LOG=N
Review-Url: https://codereview.chromium.org/1925063002
Cr-Commit-Position: refs/heads/master@{#35864}
Reason for revert:
Need to fix the #undef logic.
Original issue's description:
> Fix interpreter unittest for embedded constant pools.
>
> The offset from fp to the register file is based on the frame size
> -- which is one slot larger when embedded constant pools are enabled.
>
> TEST=unittests/DecodeBytecodeAndOperands
> R=rmcilroy@chromium.org, bmeurer@chromium.org, oth@chromium.org, mstarzinger@chromium.org
> BUG=
TBR=bmeurer@chromium.org,mstarzinger@chromium.org,oth@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1909323003
Cr-Commit-Position: refs/heads/master@{#35736}
Removes some control edges added from the RawMachineAssembler to the end of the graph.
Adds a parameter that tells the Verifier to ignore effect and control inputs.
Review URL: https://codereview.chromium.org/1912853003
Cr-Commit-Position: refs/heads/master@{#35731}
The new bytecodes replace two runtime functions. They are still unsupported by the bytecode graphbuilder, though.
BUG=v8:4907
LOG=n
Review URL: https://codereview.chromium.org/1904933002
Cr-Commit-Position: refs/heads/master@{#35716}
Removes the register file machine register from the interpreter and
replaces it will loads from the parent frame pointer. As part of this
change the raw operand values for register values changes to enable the
interpreter to keep using the operand value as the offset from the
parent frame pointer.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1894063002
Cr-Commit-Position: refs/heads/master@{#35618}
The current context is stored as a stack slot on the interpreter frame
and therefore we don't need to also maintain a machine register for the
context. Removes this register from bytecode handlers.
In the process modifies this frees up a register on ia32 to keep the
dispatch table pointer in a register rather than on a stack slot on
ia32.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1887493004
Cr-Commit-Position: refs/heads/master@{#35511}
Modifies Ignition to store code entry addresses in the dispatch table
rather than code objects. This allows the interpreter to avoid
calculating the code entry address from the code object on every
dispatch and provides a ~5-7% performance improvement on Octane with
Ignition.
This change adds ArchOpcode::kArchTailCallAddress to TurboFan to enable
tail call dispatch using these code addresses. It also adds a Dispatch
linkage creator (distinct from the stub linkage type used previously) to
allow targetting a code address target (which will diverge further from
the stub linkage type when we remove the context machine register in
Ignition).
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1882073002
Cr-Commit-Position: refs/heads/master@{#35480}
Operand values in Bytecodes.DecodeBytecodeAndOperands test are encoded
in little endian format. The test calls Bytecodes::Decode function which
reads the operands but the values are byte swapped on big endian
machines. Added big endian encoded data which decodes correctly on BE
machines.
BUG=
Review URL: https://codereview.chromium.org/1881423002
Cr-Commit-Position: refs/heads/master@{#35447}
Anotates bytecodes with a description of how each uses the accumulator.
Validates annotations and uses of accumulator when generating bytecode
handlers.
Only prints the accumulator during tracing where used.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1852213002
Cr-Commit-Position: refs/heads/master@{#35281}
Improves code coverage of bytecode array builder and constant
array builder.
Fixes initial index for constant pool slice for kQuad operands.
BUG=v8:4280,chromium:599000
LOG=N
TBR=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1845313002
Cr-Commit-Position: refs/heads/master@{#35201}
Introduces a bytecode whose handler executes the equivalent of %_IsArray and %_IsJSReceiver without a runtime call.
BUG=v8:4822
LOG=y
Review URL: https://codereview.chromium.org/1645763003
Cr-Commit-Position: refs/heads/master@{#34983}
This change introduces wide prefix bytecodes to support wide (16-bit)
and extra-wide (32-bit) operands. It retires the previous
wide-bytecodes and reduces the number of operand types.
Operands are now either scalable or fixed size. Scalable operands
increase in width when a bytecode is prefixed with wide or extra-wide.
The bytecode handler table is extended to 256*3 entries. The
first 256 entries are used for bytecodes with 8-bit operands,
the second 256 entries are used for bytecodes with operands that
scale to 16-bits, and the third group of 256 entries are used for
bytecodes with operands that scale to 32-bits.
LOG=N
BUG=v8:4747,v8:4280
Review URL: https://codereview.chromium.org/1783483002
Cr-Commit-Position: refs/heads/master@{#34955}
We may not emit bytecode for the evaluation of the to-be-returned
expression. In that case we cannot set two return positions for a return
statement (one before and one after the expression evaluation). This
sets the interpreter apart from full-codegen.
Make sure that we always have the second of the two return positions.
Note that we end up with separate test cases for ignition and FCG.
R=rmcilroy@chromium.org, vogelheim@chromium.org
BUG=v8:4690
LOG=N
Review URL: https://codereview.chromium.org/1801473003
Cr-Commit-Position: refs/heads/master@{#34771}
TestNotEqualsStrict is converted to a TestEqualsStrict and logical not
by the parser. Also, CompareIC does not have an implementation for
TestNotEqualsStrict. Hence, removing this bytecode.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1768593002
Cr-Commit-Position: refs/heads/master@{#34527}
Similar to fullcodegen, Ignition now also marks a for-in statement as
slow (via the TypeFeedbackVector) when we have to call %ForInFilter,
i.e. we either have no enumeration cache or the receiver map changes
during an iteration of the for-in map.
R=mstarzinger@chromium.org
BUG=v8:3650
LOG=n
Review URL: https://codereview.chromium.org/1755563002
Cr-Commit-Position: refs/heads/master@{#34391}
Operations on word size data must be word sized, and not word32.
Currently this only generates worse code, but in the future, it
might even generate wrong code, so we should better get this right
from the beginning.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1748953004
Cr-Commit-Position: refs/heads/master@{#34378}
Extends the constant pool to deal with more slices.
Adds ReadUnalignedUInt32().
BUG=v8:4280,v8:4747
LOG=N
Review URL: https://codereview.chromium.org/1731893003
Cr-Commit-Position: refs/heads/master@{#34319}
Reason for revert:
It is not a good idea to call CallICStub from the builtin. It might be sensitive to the frame structure. Constructing a internal frame might cause problems. It is much better to inline the code related to the type feedback vector into the builtin.
Original issue's description:
> [Interpreter] Implements calls through CallICStub in the interpreter.
>
> Calls are implemented through CallICStub to collect type feedback. Adds
> a new builtin called InterpreterPushArgsAndCallIC that pushes the
> arguments onto stack and calls CallICStub.
>
> Also adds two new bytecodes CallIC and CallICWide to indicate calls have to
> go through CallICStub.
>
> MIPS port contributed by balazs.kilvady.
>
> BUG=v8:4280, v8:4680
> LOG=N
>
> Committed: https://crrev.com/20362a2214c11a0f2ea5141b6a79e09458939cec
> Cr-Commit-Position: refs/heads/master@{#34244}
TBR=rmcilroy@chromium.org,mvstanton@chromium.org,mstarzinger@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280, v8:4680
Review URL: https://codereview.chromium.org/1731253003
Cr-Commit-Position: refs/heads/master@{#34252}
Reason for revert:
Build failure on Linux64 arm64 ASAN:
http://build.chromium.org/p/client.v8/builders/V8%20Linux64%20ASAN%20arm64%20-%20debug%20builder/builds/4829
(Leaks memory, somehow.)
Original issue's description:
> Encode interpreter::SourcePositionTable as variable-length ints.
>
> This reduces the memory consumption of SourcePositionTable by ca. 2/3.
> Over Octane, this reduces the source position table memory consumption
> from ~370kB to ~115kB, which makes it ca. 10% of the total bytecode size
> (~1.1MB)
>
> BUG=
>
> Committed: https://crrev.com/a6f41f7b8226555c5900440f6e3092b3545ee0f6
> Cr-Commit-Position: refs/heads/master@{#34250}
TBR=jochen@chromium.org,rmcilroy@chromium.org,yangguo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1728193003
Cr-Commit-Position: refs/heads/master@{#34251}
This reduces the memory consumption of SourcePositionTable by ca. 2/3.
Over Octane, this reduces the source position table memory consumption
from ~370kB to ~115kB, which makes it ca. 10% of the total bytecode size
(~1.1MB)
BUG=
Review URL: https://codereview.chromium.org/1704943002
Cr-Commit-Position: refs/heads/master@{#34250}
Calls are implemented through CallICStub to collect type feedback. Adds
a new builtin called InterpreterPushArgsAndCallIC that pushes the
arguments onto stack and calls CallICStub.
Also adds two new bytecodes CallIC and CallICWide to indicate calls have to
go through CallICStub.
MIPS port contributed by balazs.kilvady.
BUG=v8:4280, v8:4680
LOG=N
Review URL: https://codereview.chromium.org/1688283003
Cr-Commit-Position: refs/heads/master@{#34244}
Adds a profiling counter to each BytecodeArray object, and adds
code to Jump and Return bytecode handlers to update this
counter by the size of the jump or the distance from the return
to the start of the function. This is more accurate than fullcodegen's
approach since it takes forward jumps into account as well as back-edges.
Modifies RuntimeProfiler to track ticks for interpreted frames.
Currently we use the SharedFunctionInfo::profiler_ticks() instead
of adding another to tick field to avoid adding another field to
BytecodeArray since SharedFunctionInfo::profiler_ticks() is only
used by Crankshaft otherwise so we shouldn't need both for
BUG=v8:4689
LOG=N
Review URL: https://codereview.chromium.org/1707693003
Cr-Commit-Position: refs/heads/master@{#34166}
This CL introduces two new bytecodes TailCall and TailCallWide.
BUG=v8:4698,v8:4687
LOG=N
Review URL: https://codereview.chromium.org/1698273003
Cr-Commit-Position: refs/heads/master@{#34083}
