These string methods can be composed from two basic blocks: charCodeAt
and fromCharCode, both of which have fast cases for certain types of
inputs. In this patch these two blocks are refactored to allow
generating the fast cases without having to jump around the slow
cases. In the slow cases since they can now be invoked both from
inline runtime functions and from IC stubs we either have to
save/restore state of the current frame or enter/leave a new internal
frame. This is handled by new RuntimeCallHelper interface. Its
implementation for virtual frame is based on FrameRegisterState class
extracted from DeferredCode class.
Review URL: http://codereview.chromium.org/2087009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4733 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This makes the full compiler handle all constructs on ia32. However the syntax checker for the full compiler is still the same so for both normal operation and with the flag --always-full-compiler the coverage of the full compiler will be the same.
This is on preparation for improving the debugger break point experience where the plan is to only use code from full code generator when debugging JavaScript.
Runs all tests on all three platforms in release and debug mode. The tests also run with both the following flags to the test runner
--special-command="@ --nofull-compiler"
--special-command="@ --always-full-compiler"
The changes to the x64 and ARM architectures are mainly structural due to the change to EmitVariableAssignment to handle initialization of const variables.
Review URL: http://codereview.chromium.org/1989012
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4676 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
of having a list of virtual frame pointers in the jump
target we have one virtual frame, which is the frame that
all have to merge to to branch to that frame. The virtual
frame in the JumpTarget is inside the JumpTarget, rather than
being an allocated object that is pointed to. Unfortunately
this means that the JumpTarget class has to be able to see
the size of a VirtualFrame object to compile, which in turn
lead to a major reorganization of related .h files. The
actual change of functionality in this change is intended
to be minimal (we now assert that the virtual frames match
when using JumpTarget instead of just assuming that they do).
Review URL: http://codereview.chromium.org/1961004
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4631 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The generation of the deferred code for named property load where the load was inlined did a constant pool blocking for the whole deferred code. Having large numbers of this type of deferred code generated one ofter the other effectively blocked the constant pool for all the deferred code causing
Removed the BeforeGenerate/AfterGenerate for the deferred code and made macro assembler StartBlockConstPool/EndBlockConstPool non-public. Re-introduced BlockConstPoolFor instead to use with BlockConstPoolScope to block some more instructions cross function calls.
Also handle the use of native code counters for inlined named property load.
Review URL: http://codereview.chromium.org/1787005
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4507 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Instaed of having a nop after all non-inlined calls to load IC use a different nop (mov r1, r1 instead of mov r0, r0) to detect an inlined load IC.
Added more infrastructure to the deferred code handling to make it possbile to block constant pool emitting in a deferred code block, including the branch instruction ending the deferred code block.
Addressed a couple of comments to http://codereview.chromium.org/1715003, including adding an assert to make sure that the patching of an ldr instruction is always possible.
Review URL: http://codereview.chromium.org/1758003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4480 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
In the CEntryStub keep track of the actual skew from the correct alignment to ensure proper alignment before calling the runtime. Add checks to test the expected skew when running on hardware.
Use the PrepareCallCFunction/CallCFunction in a few other places.
Add check to the ARM simulator for correct alignment.
Add option --sim-stack-alignment to set the stack alignment in the simulator. Currntly only values 4 and 8 makes sense. 8 is the default to make snapshots generated with the simulator work on hardware requiring 8 byte stack alignment.
Review URL: http://codereview.chromium.org/1530043
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4425 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
stack for now. Next step is probably fixing the binary
op stubs so they can take swapped registers and fixing
the deferred code so it doesn't insist that all registers
except the two operands are flushed. Generates slightly
worse code sometimes because the peephole push-pop
elimination gets confused when we don't use the same
register all the time (the old code used r0 always).
Review URL: http://codereview.chromium.org/1604002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4368 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This re-applies r4220 and r4233, which was reverted in r4254 due to a bug. This bug has now been fixed, with the only change being line 2884 changed from
__ SmiTag(left_side->reg());
to
__ SmiTag(operand->reg());
Added a regression test.
BUG=http://crbug.com/39160
TEST=test/mjsunit/regress/regress-crbug-39160.js
Review URL: http://codereview.chromium.org/1251009
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4261 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Inline floating point compare instead of calling the stub when the following conditions are met:
* Code is in a loop
* Compare is not a for loop condition
* Compare is not an equal comparison
This inlined code handles heap number to heap number and heap number to smi compare. It can also handle smi to smi compare, but whenever there is a chance of comparing two smis the smi compare is inlined before the inlined floating point compare. Support for non SSE2 hardware is included.
A new set of variants of the compare stub without the floating point comparison code is called if the inline comapre fails due to the operands not beeing heap numbers or smis.
The virtual frame has been extended with a branch taking two live results to be carried through to the destination. This makes this change much simpler as the inlined code have two live results in registers and a number of bailouts.
CompareStub::GetName needs to be updated as well. I will do that as a separate change.
Also inlined equality check if both operands can't be NaN. This can only provide positive equals if it is the same object.
Review URL: http://codereview.chromium.org/1117011
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4220 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The inline runtime functions are now included in the fuzzing of the natives. The chack for the expected number of arguments passed have been moved to the parser which will generate a syntax error if a runtime function (either C++ or inline) is called with a different number of arguments than expected.
Review URL: http://codereview.chromium.org/573056
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4096 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Although algorithmically correct, the compiler would not allow to instantiate
a BitField that uses all 32 bits without warnings about a too large shift
count. As a consequence we were limited to 31 bit values when using BitField.
This happened when instantiating a bitfield BitField<T, shift, size> with
[shift=0, size=32] or [shift=31, size=1] or more general any
[shift=X, size=32-X]
As side-effect of the new implementation the compiler now warns if we ever
try instantiating a bitfield with size 0.
Review URL: http://codereview.chromium.org/606063
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3910 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Currently we only pass a boolean parameter indicating whether
the input operands to the GenericBinaryOpStub are guaranteed
to be numbers or not.
Instead we pass the complete number type as a parameters. This
allows to use more precise type information for code generation
in the stub.
Also make the computation of the result type more precise and correct on both ia32 and x64.
Review URL: http://codereview.chromium.org/593110
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3873 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
bailouts. For now the virtual-frame state at entry of a function is
hard-coded when using the virtual-frame based compiler as the
secondary compiler.
Setup frame pointer correctly on function entry on ARM in
fast-codegen-arm.
Review URL: http://codereview.chromium.org/569010
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3776 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
When a function is called with a value type as the receiver this is now boxed as an object.
This is a low-impact solution where the receiver is only boxed when required. For IC calls to the V8 builtins values are not boxed and as most of the functions on String.prototype, Number.prototype and Boolean.prototype are sitting there most IC calls on values will not need any boxing of the receiver.
For calls which are not IC calls but calls through the CallFunctionStub a flag is used to determine whether the receiver might be a value and only when that is the case will the receiver be boxed.
No changtes to Function.call and Function.apply - they already boxed values. According to the ES5 spec the receiver should not be boxed for these functions, but current browsers have not adopted that change yet.
BUG=223
TEST=test/mjsunit/value-wrapper.js
TEST=test/mjsunit/regress/regress-crbug-3184.js
Review URL: http://codereview.chromium.org/542087
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3617 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Calls to RegExp no longer have to be via a call to the runtime system. A new stub have been added which can handle this call in generated code. The stub checks all the parameters and creates RegExp entry frame in the same way as it is created by the runtime system. Bailout to the runtime system is done whenever an uncommon situation is encountered or when the static data used is not initialized. After running the native RegExp code the last match info is updated like in the runtime system.
Currently only ASCII strings are handled.
Added another argument to the RegExp entry frame. It indicated whether the call is direct from JavaScript code or through the runtime system. This information is used when RegExp execution is interrupted. If an interruption happens when RegExp code is called directly a retry is issued causing the interruption to be handled via the runtime system. The reason for this is that the direct call to RegExp code does not support garbage collection.
Review URL: http://codereview.chromium.org/521028
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3542 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
to floating point and then converting back we convert directly to a
32 bit integer. In addition the bit twiddling implementation of float-
to-integer conversion has been ported from ARM. Testing has shown that
this runs faster than the x87 or SSE3 rounding instructions. This change
is IA32 only. There may be a smaller benefit from doing the same on x64.
Review URL: http://codereview.chromium.org/506052
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3492 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Condition block of do/while statements is a valid break location so it should have its own position. The block is represented by a regular Expression node so we cannot store the position in it, instead the position is stored in a separate field in DoWhileStatement AST node.
BUG=514
Review URL: http://codereview.chromium.org/385136
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3312 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
There were two separate implementations of the function
'BuildBoilerplate' that is used to compile function declarations and
function literals. The implementations did not do exactly the same
thing. In particular, one ignored the flag --lazy.
Combine the two implementations.
Review URL: http://codereview.chromium.org/360011
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3218 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
of individual changes:
- Added infrastructure for custom stub caching.
- Push the code object onto the stack in exit calls instead of a
debug/non-debug marker.
- Remove the DEBUG_EXIT frame type.
- Add a new exit stub generator for API getters.
Review URL: http://codereview.chromium.org/330017
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3130 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
