On the way to a cheaper and more scalable stack frame representation
for the inspector (crbug/1258599), this removes the need to expose
both what was called "function name" and what was called "function
debug name" on a v8::StackFrame instance.
The reason to having a distinction between that the V8 API exposes
and what the inspector exposes as frame function name is that after
the initial refactoring around v8::internal::StackFrameInfo, some
wasm cctests would still dig into the implementation details and
insist on seeing the "function name" rather than the "function
debug name". This CL now addresses that detail in the wasm cctests
and going forward unifies the function names used by the inspector
and the V8 API (which is not only needed for internal consistency
and reduced storage requirements in the future, but also because
Blink for example uses v8 API and v8_inspector API interchangeably
and assumes that they agree, even though at this point Blink
luckily wasn't paying attention to the function name):
- The so-called "detailed stack trace", which is produced for the
inspector and exposed by the v8 API, always yields the "function
debug name" (which for example in case of wasm will be a WAT
compatible name),
- while the so-called "simple stack trace", which is what is used
to implement the CallSite API and underlies Error.stack continues
to stick to the "function name" which in case of wasm is not
WAT compatible).
Bug: chromium:1258599
Change-Id: Ib15d038f3ec893703d0f7b03f6e7573a38e82b39
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3312274
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Simon Zünd <szuend@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78283}
This CL makes sure to forward the information that we are pausing
because of a debugger statement, and to encode it explicitly
as an 'other' reason when reporting the pause to the front-end.
Drive-by: refactoring the way break reasons are propagated by
introducing a new enum for break reasons
Bug: chromium:1229541, chromium:1133307
Change-Id: I9d2e8d8da54d96a231eff9d1f62b74507955b18f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3306978
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Kim-Anh Tran <kimanh@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78202}
We optimize away type upcasts for nominal types in WasmFullDecoder.
Upcasts trivially hold for nominal types, which is not the case for
structural types. Note that we already optimize away trivially-failing
checks (when types are unrelated) for both nominal and structural types.
Bug: v8:7748
Change-Id: I720c9803cb8b4071aa4bae112ce06d587b7a68fa
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3306984
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78201}
memory[1] needs to be set in LE order even on BE platforms.
Change-Id: I44620c30a25719d0d61e0f14490342ee930dbbb4
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3302852
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Zhi An Ng <zhin@chromium.org>
Commit-Queue: Milad Farazmand <mfarazma@redhat.com>
Cr-Commit-Position: refs/heads/main@{#78136}
Previously, we would encode 'other' as a reason for pausing when
stepping too, however, it would not show as such in case it would
overlap with another reason. This CL makes sure that we always report
'other' as a reason if we are stepping.
Drive-by: only encode 'other' as a reason once
Bug: chromium:1229541
Change-Id: Id73822dff68d1d54a2f1fafdf2a097e1377ece75
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3295346
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Kim-Anh Tran <kimanh@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78118}
Design doc: bit.ly/3jEVgzz
We separate the internal representation of function references in Wasm
from their JSFunction-based (external) representation. This improves
performance of call_ref by requiring less indirections to load the
context and call target from a function reference. In the boundary
between wasm and JS/the C API, we add transformations between the two
representations.
Detailed changes:
- Introduce WasmInternalFunction, containing fields required by
call_ref, as well as a reference to the corresponding
WasmExternalFunction. Add a reference to the WasmInternalFunction in
WasmFunctionData. The {WasmInternalFunction::FromExternal} helper
extracts the internal out of an external function.
- Change {WasmInstanceObject::external_functions()} to internal
functions.
- Change wasm function tables to contain internal functions.
- Change the following code to use internal functions:
- call_ref in liftoff and Turbofan
- function type checks in liftoff and Turbofan
- CallRefIC and GenericJSToWasmWrapper builtins
- {InitExprInterface::RefFunc}
- module-compiler.cc in {ProcessTypeFeedback}
- In module-instantiate.cc, in function-rtt creation.
- Add transformations between internal and external functions in:
- WasmWrapperGraphBuilder::{ToJS, BuildUnpackObjectWrapper, FromJS,
BuildJSToJSWrapper}.
- debug-wasm-objects.cc in {FunctionProxy::Get},
{WasmValueObject::New} and {AddWasmTableObjectInternalProperties}.
- runtime-wasm.cc in ReplaceWrapper
- the C and JS APIs
- module-instantiate.cc, in import and export processing, as well as
{InitializeIndirectFunctionTables}
- WasmTableObject::{IsValidElement, SetFunctionTableEntry}
- {WasmGlobalObject::SetFuncRef}
- Simplify body descriptors of WasmExternalFunction variants.
- Adjust tests.
Bug: v8:11510
Change-Id: I8377f46f55c3771391ae1c5c8201a83854ee7878
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3277878
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78068}
No implementation needed, since relaxed swizzle is already handled in
wasm-compiler, and is visited by VisitI8x16Swizzle, and on arm64 we
generate the same code (TBL).
Bug: v8:12284
Change-Id: I446632101de26bb2f28c3f3ed60f209e81600dec
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3272643
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78026}
We move the mask to be the first input of the node in wasm-compiler.cc,
this matches the order for S128Select, which makes code-gen for
arm/arm64 simpler (directly lower to BSL with no more shuffle of
inputs). This requires tweaking of input indices in the instruction
selector for ia32/x64, but no change in codegen.
Bug: v8:12284
Change-Id: I1f6f1a9fe0869509be77f77b6f54a0c636a0f92d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3272640
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77958}
NONE clashes with the PropertyAttributes::NONE, which is defined in
v8::internal namespace. PropertyAttributes have too many call sites
and depend on using the enums as masks, making it hard to convert
to an enum class. So we are changing the name instead.
Bug: v8:12244
Change-Id: Iec0be12c626549cca137aceeaee0e30fafab8b05
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3284003
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77956}
Implement f32x4.qfma, f32x4.qfms, f64x2.qfma, f64x2.qfms.
These were already implement in macro-assembler-x64, so move the
implementation to shared-macro-assembler.
x64 has a macro list in fma-instr, copy this to ia32, and then use this
macro list to define existing vfma{ss,sd} instructions in
assembler-ia32.
Disassembly support is intentionally omitted in this patch, I will add
this in a follow-up. The currently disassembly in x64 is quite verbose
and I would like to make use of macro-list but it requires breaking up
the macro list into smaller parts, so I will do that refactoring for
both ia32 and x64 in the follow-up.
Bug: v8:12284
Change-Id: I3654ea108a123467506c5837072b6b63ecbc74da
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3255664
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77932}
Due to a bug on AIX, some of the glibc FP functions do not
preserve the sign bit when a negative input is passed by
value and the output is rounded to 0:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97086
This CL continue the fixes previously added here:
https://crrev.com/c/2468618
Change-Id: I2afa1f67ac1d29ec0606de6d6ebcf05be0664b8d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3282308
Reviewed-by: Zhi An Ng <zhin@chromium.org>
Commit-Queue: Milad Fa <mfarazma@redhat.com>
Cr-Commit-Position: refs/heads/main@{#77915}
FLAG_wasm_dynamic_tiering is still off by default. When enabled,
it now uses the technique previously behind --new-wasm-dynamic-tiering.
Bug: v8:12281
Change-Id: I365c2c066e62418cd6abc7830f95d1fe0f950e33
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3275570
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77883}
Relaxed f32x4 and f64x2 min and max.
These instructions only guarantee results when the inputs are non nans,
and when the inputs are not 0s of opposite signs.
Drive-by rename of instruction codes to be Minps/Maxps/Minpd/Maxpd
since they map down exactly to a single instruction.
ia32 port of c3f346b7ac.
Bug: v8:12284
Change-Id: If64da551524ea8c304e1fa8f9cf4acbd54abfe5c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3251708
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77780}
4 instructions, i8x16, i16x8, i32x4, i64x2 relaxed lane select. These
instructions only guarantee results when the entire lane is set or
unset, so vpblendvb will give correct results for all of them.
Same instruction selector code as x64.
Bug: v8:12284
Change-Id: Icd0bc8c5125cd2780141117830d6cb6e6babbb74
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3251701
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77779}
Since the indirect function table at index 0 in an instance is now
represented like the other tables, the IndirectFunctionTableEntry
abstraction is no more useful. We replace it with direct access to the
tables and a simpler abstraction {FunctionTargetAndRef}.
Bug: v8:11510
Change-Id: Iab4a6ca7eda8eb1757dbd321cb3997e98e78267e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3247030
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77754}
We enable struct.new and array.init initializer expressions in the JS
testcase generated by --wasm-fuzzer-gen-test. We needed to make some
changes in the WasmInitExpr class, and to implement a new interface for
the WasmFullDecoder, which constructs a WasmInitExpr.
Changes:
- Make WasmInitExpr a ZoneObject. Use a pointer for its operands_ field.
This is needed so WasmInitExpr is trivially copiable, and thus usable
as a Value type in WasmFullDecoder.
- Implement a WasmFullDecoder interface in wasm-fuzzer-common that
constructs a WasmInitExpr. Use it to decode initializers in the
module generated by the fuzzer.
- Change AppendInitExpr to take a WasmInitExpr as argument.
- Fix an issue with printing of struct definitions.
- Change initializer expression used for structs to struct.new_with_rtt.
This is consistent with the currently used structural types.
Bug: v8:11954
Change-Id: I65a87cc98701a54f32500be192b3b6eef2ff6c8c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3257712
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77730}
The wasm serialization format only contains TurboFan code. All other
functions are only represented by placeholders. With this CL
serialization fails if the serialized module does not contain any
TurboFan functions and would therefore consist only of placeholders.
This is a defense in depth approach, because ideally serialization
only gets triggered when TurboFan code is available. However, in some
scenarios like debugging it can happen that modules without TurboFan
code get serialized.
Bug: v8:12281
Change-Id: Ib05430ff89eb2317da80fc0d086ce1d7ab0e919d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3212510
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77715}
4 instructions, int32x4.trunc_f32x4_{s,u},
int32x4.trunc_f64x2_{s,u}_zero.
Drive-by cleanup to wasm-interpreter to use saturated_cast.
The machine ops are named <int>Trunc<float>, dropping the "sat" since
these don't do any saturation anymore.
Bug: v8:12284
Change-Id: I2d4d6a61b819b287fee69e3eea03dd3151cfa10d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3223166
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77598}
Relaxed f32x4 and f64x2 min and max.
These instructions only guarantee results when the inputs are non nans,
and when the inputs are not 0s of opposite signs.
Reuse existing float binop testing harnesses and add special checks for
such constants when relaxed operations are being tested.
Drive-by rename of x64 instruction codes to be Minps/Maxps/Minpd/Maxpd
since they map down exactly to a single instruction.
Bug: v8:12284
Change-Id: I1449dbfa87935a96d7d260db22667ab7b9e86601
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3218196
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77484}
4 instructions, i8x16, i16x8, i32x4, i64x2 relaxed lane select. These
instructions only guarantee results when the entire lane is set or
unset, so vpblendvb will give correct results for all of them.
Bug: v8:12284
Change-Id: I76959a23f2d97de8ecc3bef43d138184484e3c4d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3207006
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77401}
Since we introduced `array.init` as a way to create fully initialized
arrays, immutable arrays are no longer useless, and they enable certain
static optimizations, so this patch allows them.
Bug: v8:7748
Change-Id: I404aab60099826f4bd83cf54e5e1acbc38a3ca9b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3221151
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77397}
This patch adds infrastructure for collecting feedback about call_ref
call targets in Liftoff code, and using that feedback for turning
such calls into inlineable direct calls when building Turbofan graphs.
The feature is considered experimental quality and hence off by default,
--wasm-speculative-inlining turns it on.
Bug: v8:7748
Change-Id: I0d0d776f8a71c3dd2c9124d3731f3cb06d4f5821
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3205902
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77287}
This is a reland of 16df1dfa13
No changes have been made to this reland as previous commit was reverted
due to a new test revealing an existing bug. This bug has now been fixed.
Original change's description:
> [arm64][wasm-simd] Use Cm(0) for integer comparison with 0
>
> Use an immediate zero operand for integer comparison when possible. This
> gives ~1% runtime performance improvement in some benchmarks on Neoverse
> N1.
>
> Change-Id: I727a8104f8e6ca3d122d6b5b8b3d38d7bdd76c47
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3158327
> Reviewed-by: Zhi An Ng <zhin@chromium.org>
> Commit-Queue: Martyn Capewell <martyn.capewell@arm.com>
> Cr-Commit-Position: refs/heads/main@{#76847}
Change-Id: I77d6923d79407a83becbd39970c6a3f62d3a304d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3178482
Reviewed-by: Zhi An Ng <zhin@chromium.org>
Commit-Queue: Rodolph Perfetta <rodolph.perfetta@arm.com>
Cr-Commit-Position: refs/heads/main@{#77260}
WebAssembly dynamic tiering should be tested with an origin trial. For
the origin trial the feature flag value has to be loaded from blink.
This CL stores the value of the --wasm-dynamic-tiering flag in the
compilation state, from where it gets passed forward to all uses of the
flag. The flag value gets loaded from blink when a new NativeModule is
created.
R=clemensb@chromium.org
Bug: v8:12281
Change-Id: Ia26355a665b7dfcdb47144863c1bec296774abb2
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3204963
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77256}
With dynamic tiering, typically not all functions of a WebAssembly
module get compiled with TurboFan, and therefore the code caching would
never get triggered. With this CL code caching is triggered whenever
{FLAG_wasm_caching_threshold} bytes of TurboFan code are generated.
This new caching event is only triggered when --wasm-dynamic-tiering is
enabled.
R=clemensb@chromium.org
Bug: v8:12281
Change-Id: I939325aea7e4310aa76c936636799661c05d4079
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3202593
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77251}
Loop exits are only used during loop unrolling and are then removed, as
they cannot be handled by later optimization stages. Since unrolling
comes before inlining in the compilation pipeline, we should not emit
loop exits in inlined functions.
Bug: v8:12166
Change-Id: I28b3ebaf67c9e15b127eeb1a63906c4ecfd77480
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3195871
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77175}
When handling the 'end' opcode, there was a confusion with the value of
"unreachable". This DCHECK assumes the value of "unreachable" before
closing the scope, but was placed after the value is potentially updated
to reflect the state after the 'end' opcode.
R=clemensb@chromium.org
Bug: chromium:1251845
Change-Id: Iea526e6485fa705f6ff4077f54a53204cc70a926
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3190102
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77116}
Drive-by clean-up to move ADD_CODE, which is defined the same way in
multiple files, into wasm-run-utils.h.
R=adamk@chromium.org
Bug: v8:12244
Change-Id: I61d54cf2c589c3f8b69950fba097d8754bb99c5a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3183524
Reviewed-by: Adam Klein <adamk@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77065}
Some macros are redundant or unused.
- WASM_RETURN1 is identical to WASM_RETURN.
- WASM_RETURNN has an unused {count} parameter, and is otherwise
identical to WASM_RETURN.
- WASM_IFB is identical to WASM_IF.
- WASM_CASE and WASM_CASE_BR are unused.
- WASM_BR_TABLEV is unused.
R=thibaudm@chromium.org
Bug: v8:12244
Change-Id: Ie7be00351f2dfe38d6e84d80e157a85df37233a9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3178860
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77056}
Rename the enum value to avoid variable shadowing.
R=clemensb@chromium.org
Bug: v8:12244
Change-Id: I96a3bee7615b44692bb9edfedf82c6020a803d0d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3181529
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77050}
NameSectionKindCode::kFunction got shadowed by
WasmCompilationResult::Kind::kFunction. NameSectionKindCode is not used
often, so this CL just adds "Code" to all fields of this enum.
R=clemensb@chromium.org
Bug: v8:12244
Change-Id: I87155a43084b868f6c118ddc2e44cb9c35b4249b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3181535
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77049}
Bug: v8:12244
Change-Id: I5a85e109316b349545d2699a59200c167d261842
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3180244
Reviewed-by: Adam Klein <adamk@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77026}
i32 comparisons often compare against constants, in order to implement
conditional branches. This CL optimizes such code by not loading the
constant into a register first, but directly emitting the comparison.
The code is shared for implementing {if} and {br_if} (and thereby makes
those two methods more readable).
R=thibaudm@chromium.org
Change-Id: I3f2f071a1c9e4b02c7368a2757bf4aae2920bd69
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3172765
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#77008}
When dst != lhs, we moved lhs to dst, but dst can be == rhs, so we would
overwrite rhs, and end up comparing lhs with itself, always returning
false. We handle the different aliasing cases in the macro-assembler
function I64x2GtS, to simplify the checks in Liftoff a little bit.
TurboFan does not need to change as it will require dst == lhs when AVX
is not supported.
Bug: v8:12237
Change-Id: Icefa6eb79083c003e93dbbd11ccc419aae4b15d3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3169312
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/main@{#76945}
The recent change in the delegate semantics was incorrectly implemented
in the interpreter. It only checked that the first opcode of the target
block is a 'try': we also need to skip try blocks when we are already in
their 'catch' or 'catch_all' sub-block.
Use the exception_stack instead, since it already only contains indices
of try blocks that haven't reached their handlers yet.
R=clemensb@chromium.org
Bug: chromium:1249306
Change-Id: I15746b4bfabf3dcf04cfe0f2ad438c573cce65e7
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3168622
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#76919}
When the input to F64x2PromoteLowF32x4 is a S128Load64Zero, we can skip
the load + promote, and promote directly with a memory operand. The
tricky bit here is that on systems that rely on OOB trap handling, the
load is not eliminatable, so we always visit the S128Load64Zero, even
though after instruction-selector pattern-matching, it is unused. We
mark it as defined to skip visiting it, only if we matched it.
Bug: v8:12189
Change-Id: I0a805a3fce65c56ec52082b3625e1712ea1ee7cf
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3154347
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/main@{#76917}
The default value for table entries in WebAssembly tables is null when
the table gets allocated from WebAssembly, but when the table gets
allocated from JavaScript, the default value is undefined when the
table type is externref. With this CL V8 handles the JavaScript case
spec-compliant.
R=manoskouk@chromium.org
Bug: v8:12227
Change-Id: Ic8a1361629d8e5dfb59e2ee22a5e0ae0f6de936d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3162045
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#76892}
